Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

7 4 V H February 2008 C U 0 74VHCU04 4 — Hex Inverter H e x Features General Description In v ■ High Speed: t = 3.5ns (typ.) at V = 5V The VHCU04 is an advanced high speed CMOS Inverter e PD CC r ■ Low Power Dissipation: I = 2µA (max.) @ T = 25°C fabricated with silicon gate CMOS technology. It te CC A ■ High Noise Immunity: V = V = 28% V (min.) achieves the high speed operation similar to equivalent r NIH NIL CC Bipolar Schottky TTL while maintaining the CMOS low ■ Power down protection is provided on all inputs power dissipation. ■ Low Noise: V = 0.8V (max.) OLP Since the internal circuit is composed of a single stage ■ Pin and Function Compatible with 74HCU04 inverter, it can be used in analog applications such as crystal oscillators. An input protection circuit ensures that 0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to inter- face 5V to 3V systems and two supply systems such as battery backup. This circuit prevents device destruction due to mismatched supply and input voltages. Ordering Information Package Order Number Number Package Description 74VHCU04M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74VHCU04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74VHCU04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHCU04 Rev. 1.4.0

7 4 Connection Diagram Logic Symbol V H C IEEE/IEC U 0 4 — H e x I n v e r t e r Truth Table Pin Description A O L H Pin Names Description H L A Inputs n O Outputs n ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHCU04 Rev. 1.4.0 2

7 4 Absolute Maximum Ratings V H Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be C operable above the recommended operating conditions and stressing the parts to these levels is not recommended. U 0 In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. 4 The absolute maximum ratings are stress ratings only. — Symbol Parameter Rating H e V Supply Voltage –0.5V to +7.0V x CC I n VIN DC Input Voltage –0.5V to +7.0V v e VOUT DC Output Voltage –0.5V to VCC + 0.5V rt e IIK Input Diode Current –20mA r I Output Diode Current ±20mA OK I DC Output Current ±25mA OUT I DC V /GND Current ±50mA CC CC T Storage Temperature –65°C to +150°C STG T Lead Temperature (Soldering, 10 seconds) 260°C L Recommended Operating Conditions(1) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Rating V Supply Voltage 2.0V to +5.5V CC V Input Voltage 0V to +5.5V IN V Output Voltage 0V to V OUT CC T Operating Temperature –40°C to +85°C OPR Note: 1. Unused inputs must be held HIGH or LOW. They may not float. ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHCU04 Rev. 1.4.0 3

7 4 DC Electrical Characteristics V H C TA = –40°C to U T = 25°C +85°C 0 A 4 Symbol Parameter VCC (V) Conditions Min. Typ. Max. Min. Max. Units — VIH HIGH Level Input 2.0 1.70 1.70 V H Voltage 3.0–5.5 0.8 x V 0.8 x V e CC CC x VIL LOW Level Input 2.0 0.30 0.30 V In Voltage v 3.0–5.5 0.2 x VCC 0.2 x VCC e r V HIGH Level 2.0 V = V I = –50µA 1.8 2.0 1.8 V t OH IN IL OH e Output Voltage r 3.0 2.7 3.0 2.7 4.5 4.0 4.5 4.0 3.0 V = GND I = –4mA 2.58 2.48 IN OH 4.5 I = –8mA 3.94 3.80 OH V LOW Level 2.0 V = V I = 50µA 0.0 0.2 0.2 V OL IN IH OL Output Voltage 3.0 0.0 0.3 0.3 4.5 0.0 0.5 0.5 3.0 VIN = VCC IOL = 4mA 0.36 0.44 4.5 I = 8mA 0.36 0.44 OL I Input Leakage 0–5.5 V = 5.5V or GND ±0.1 ±1.0 µA IN IN Current I Quiescent 5.5 V = V or GND 2.0 20.0 µA CC IN CC Supply Current Noise Characteristics T = 25°C A Symbol Parameter V (V) Conditions Typ. Limits Units CC V (2) Quiet Output Maximum 5.0 C = 50pF 0.5 0.8 V OLP L Dynamic V OL V (2) Quiet Output Minimum 5.0 C = 50pF –0.5 –0.8 V OLV L Dynamic V OL V (2) Minimum HIGH Level 5.0 C = 50pF 4.0 V IHD L Dynamic Input Voltage V (2) Maximum LOW Level 5.0 C = 50pF 1.0 V ILD L Dynamic Input Voltage Note: 2. Parameter guaranteed by design. ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHCU04 Rev. 1.4.0 4

7 4 AC Electrical Characteristics V H C TA = –40°C U T = 25°C to +85°C 0 A 4 Symbol Parameter V (V) Conditions Min. Typ. Max. Min. Max. Units — CC t , t Propagation Delay 3.3 ± 0.3 C = 15pF 5.0 8.9 1.0 10.5 ns H PHL PLH L e C = 50pF 7.5 11.4 1.0 13.0 x L I 5.0 ± 0.5 C = 15pF 3.5 5.5 1.0 6.5 ns n L v C = 50pF 5.0 7.0 1.0 8.0 e L r t C Input Capacitance V = Open 5 10 10 pF e IN CC r C Power Dissipation (3) 9 pF PD Capacitance Note: 3. C is defined as the value of the internal equivalent capacitance which is calculated from the operating PD current consumption without load. Average operating current can be obtained by the equation: I (opr.) = C • V • f + I / 6 (per gate). CC PD CC IN CC ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHCU04 Rev. 1.4.0 5

0.65 (cid:24)(cid:17)(cid:19)(cid:19)(cid:147)(cid:19)(cid:17)(cid:20)(cid:19) A 0.43TYP 14 8 B 6.4 (cid:23)(cid:17)(cid:23)(cid:19)(cid:147)(cid:19)(cid:17)(cid:20)(cid:19) 6.10 3.2 1.65 1 7 0.2 C B A PIN1IDENT TOPVIEW ALLLEADTIPS 0.45 RECOMMENDEDLANDPATTERN 1.2MAX SEEDETAILA +0.15 0.90 -0.10 0.20 (cid:19)(cid:17)(cid:20)(cid:19)(cid:147)(cid:19)(cid:17)(cid:19)(cid:24) 0.09 ALLLEADTIPS 0.30 0.19 C 0.1 C 0.65 0.13 A B C (cid:20)(cid:21)(cid:17)(cid:19)(cid:19)(cid:131)(cid:3)(cid:55)(cid:50)(cid:51)(cid:3)(cid:9)(cid:3)(cid:37)(cid:50)(cid:55)(cid:55)(cid:50)(cid:48) FRONTVIEW 0.09MIN NOTES: GAGEPLANE A.CONFORMSTOJEDECREGISTRATIONMO-153, VARIATIONAB,REFNOTE6 B.DIMENSIONSAREINMILLIMETERS. 0.25 0.09MIN C.DIMENSIONSAREEXCLUSIVEOFBURRS, (cid:19)(cid:131)(cid:16)(cid:3)(cid:27)(cid:131) (cid:19)(cid:17)(cid:25)(cid:147)(cid:19)(cid:17)(cid:20) MOLDFLASH,ANDTIEBAREXTRUSIONS SEATINGPLANE 1.00 D.DIMENSIONINGANDTOLERANCESPERANSI DETAILA Y14.5M,2009. E.LANDPATTERNSTANDARD:SOP65P640X110-14M. F.DRAWINGFILENAME:MKT-MTC14rev7.

8.75 A 8.50 7.62 14 0.65 8 14 8 B 4.00 6.00 5.60 3.80 1.70 1 7 PIN #1 1.27 0.51 1 7 IDENT. 1.27 0.35 (0.33) 0.25 M C B A LAND PATTERN RECOMMENDATION TOP VIEW 1.75 MAX A C 0.25 0.19 1.50 0.10 C 0.25 1.25 0.10 SIDE VIEW FRONT VIEW NOTES: A. CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C B. ALL DIMENSIONS ARE IN MILLIMETERS 0.50 0.25 x 45 C. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS R0.10 GAGE D. LAND PATTERN STANDARD: PLANE SOIC127P600X145-14M R0.10 E. CONFORMS TO ASME Y14.5M, 2009 0.36 D. DRAWING FILENAME: MKT-M14Arev14 8° 0° 0.90 0.50 SEATING PLANE (1.04) DETAIL A SCALE 16 : 1

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com Literature Distribution Center for ON Semiconductor USA/Canada 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910 Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative © Semiconductor Components Industries, LLC www.onsemi.com www.onsemi.com 1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O N Semiconductor: 74VHCU04MX 74VHCU04M 74VHCU04SJ 74VHCU04MTCX 74VHCU04MTC 74VHCU04SJX