74LVC86A QUADRUPLE 2-INPUT EXCLUSIVE OR GATES Description Pin Assignments The 74LVC86A provides four independent 2-input exclusive OR (Top View) gates. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this 1A 1 14 Vcc device to be used in a mixed voltage environment. The device is fully 1B 2 13 4B specified for partial power down applications using IOFF. The IOFF 1Y 3 12 4A circuitry disables the output preventing damaging current backflow 2A 4 11 4Y when the device is powered down. 2B 5 10 3B The gates perform the positive Boolean function: 2Y 6 9 3A Y = A ⊕B or Y = AB+ AB GND 7 8 3Y Features • Supply Voltage Range from 1.65V to 5.5V • Sinks 24mA at VCC = 3.3V • CMOS low power consumption Applications • IOFF Supports Partial-Power-Down Mode Operation • Inputs or outputs accept up to 5.5V • Voltage Level Shifting • Inputs can be driven by 3.3V or 5.5V allowing for voltage • General Purpose Logic translation applications. • Power Down Signal Isolation • ESD Protection Exceeds JESD 22 • Wide array of products such as: (cid:131) 200-V Machine Model (A115-A) (cid:131) PCs, networking, notebooks, ultrabooks, netbooks (cid:131) 2000-V Human Body Model (A114-A) (cid:131) Computer peripherals, hard drives, CD/DVD ROM (cid:131) Latch-Up Exceeds 250mA per JESD 78, Class II (cid:131) TV, DVD, DVR, set top box (cid:131) Exceeds 1000-V Charged Device Model (C101C) • Range of Package Options SO-14 and TSSOP-14 • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “Green” Device (Note 3)    Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 74LVC86A 1 of 10 June 2012 Document number: DS35264 Rev. 3 - 2 www.diodes.com © Diodes Incorporated

74LVC86A Pin Descriptions Pin Number Pin Name Description 1 1A Data Input 2 1B Data Input 3 1Y Data Output 4 2A Data Input 5 2B Data Input 6 2Y Data Output 7 GND Ground 8 3Y Data Output 9 3A Data Input 10 3B Data Input 11 4Y Data Output 12 4A Data Input 13 4B Data Input 14 VCC Supply Voltage Logic Diagram Function Table Inputs Output A B Y L L L L H H H L H H H L 74LVC86A 2 of 10 June 2012 Document number: DS35264 Rev. 3 - 2 www.diodes.com © Diodes Incorporated

74LVC86A Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.) Symbol Description Rating Unit ESD HBM Human Body Model ESD Protection 2 KV ESD CDM Charged Device Model ESD Protection 1 KV ESD MM Machine Model ESD Protection 200 V VCC Supply Voltage Range -0.5 to 6.5 V VI Input Voltage Range -0.5 to 6.5 V VO Voltage applied to output in high impedance or IOFF state -0.5 to 6.5 V VO Voltage applied to output in high or low state -0.3 to VCC +0.5 V IIK Input Clamp Current VI <0 -50 mA IOK Output Clamp Current VO <0 -50 mA IO Continuous output current 50 mA ICC,, IGND Continuous current through Vcc or GND ±100 mA TJ Operating Junction Temperature -40 to +150 °C TSTG Storage Temperature -65 to +150 °C PTOT Total Power Dissipation 500 mW Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.) Symbol Parameter Conditions Min Max Unit VCC Supply Voltage 1.65 5.50 V VI Input Voltage 0 5.5 V Active Mode 0 VCC V VO Output Voltage VCC = 0V; Power Down Mode 0 5.5 V VCC = 1.65V to 2.7V 20 Δt/ΔV Input transition rise or fall rate ns/V VCC = 2.7V to 5.5V 10 TA Operating free-air temperature -40 +125 °C Note: 5. Unused inputs should be held at VCC or Ground. 74LVC86A 3 of 10 June 2012 Document number: DS35264 Rev. 3 - 2 www.diodes.com © Diodes Incorporated

74LVC86A Electrical Characteristics (@TA = +25°C, unless otherwise specified.) T = -40°C to +85°C T = -40°C to +125°C A A Symbol Parameter Test Conditions V Unit CC Min Max Min Max 1.65V to 1.95V 0.65 X VCC 0.65 X VCC High-level Input 2.3V to 2.7V 1.7 1.6 VIH Voltage 2.7V to 3.6V 2.0 2.0 V 4.5V to 5.5V 0.7 X VCC 2.0 1.65V to 1.95V 0.35 X VCC 0.35 X VCC Low-level input 2.3V to 2.7V 0.7 0.7 VIL voltage 2.7V to 3.6V 0.8 0.8 V 4.5V to 5.5 V 0.3 X VCC 0.3 X VCC IOH = -100μA 1.65V to 3.6V VCC – 0.2 VCC – 0.3 IOH = -4mA 1.65V 1.2 High Level IOH = -8mA 2.3V 1.9 VOH Output Voltage 2.7V 2.2 2.05 V IOH = -12mA 3.0V 2.3 2.1 IOH = -24mA 3.0V 2.2 2.0 IOH = 100μA 1.65V to 5.5V 0.2 0.3 IOH = 4mA 1.65V 0.45 0.6 High-level IOH = 8mA 2.3V 0.70 0.85 VOL Output Voltage 2.7V 0.40 0.6 V IOH = 12mA 3.0V 0.55 0.6 IOH =-24mA 3.0V 0.55 0.6 II Input Current VI =GND to 5.5V 3.6V ±5 ±20 μA Power Down IOFF Leakage VI or VO = 0 10 20 μA Current 0V to 3.6V ICC Supply Current VI = GND or VCC IO=0 3.6V 10 40 μA ΔICC ASudpdpitiloy nCaul rrent O–0n.e6 Vin Oputht eart VCC 2.7V to 3.6V 500 5000 μA 74LVC86A 4 of 10 June 2012 Document number: DS35264 Rev. 3 - 2 www.diodes.com © Diodes Incorporated

74LVC86A Switching Characteristics Test TA = +25°C -40°C to +85°C -40°C to +125°C Symbol Parameter V Unit Conditions CC Min Typ Max Min Max Min Max 1.65V to1.95V 1.0 4.1 9.4 1.0 9.9 1.0 11.4 Propagation 2.3V to 2.7V 1.0 2.9 7.1 1.0 7.6 1.0 9.7 tPD Delay AN or BN Figure 1 ns 2.7V 1.0 2.8 5.4 1.0 5.6 1.0 7.1 to YN 3.0V to 3.6V 1.0 2.5 4.4 1.0 4.6 1.0 5.8 Output Skew tSK(0) 3.0V to 3.6V 1.0 1.5 ns Time Operating Characteristics (@TA = +25°C, unless otherwise specified.) Test VCC = 1.8V VCC = 2.5V VCC = 3.3V Parameter Unit Conditions Typ Typ Typ Power dissipation Cpd f = 10 MHz 6.4 7.4 8.4 pF capacitance per gate Vi = VCC – or CI Input Capacitance 4 4 4 pF GND Package Characteristics Symbol Parameter Test Conditions V Min Typ Max Unit CC Thermal Resistance SO-14 TBD θJA (Note 6) oC/W Junction-to-Ambient TSSOP-14 159 Thermal Resistance SO-14 TBD θJC (Note 6) oC/W Junction-to-Case TSSOP-14 25 Note: 6. Test condition for SO-14 and TSSOP-14: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 74LVC86A 5 of 10 June 2012 Document number: DS35264 Rev. 3 - 2 www.diodes.com © Diodes Incorporated

74LVC86A Parameter Measuement Information Inputs V V C R CC M L L V t/t I r f 1.8V±0.15V VCC ≤2ns VCC/2 30pF 1KΩ 2.5V±0.2V VCC ≤2ns VCC/2 30pF 500Ω 2.7V 2.7V ≤2.5ns 1.5V 50pF 500Ω 3.3V±0.3V 2.7V ≤2.5ns 1.5V 50pF 500Ω Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A . Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz C. Inputs are measured separately one transition per measurement D. tPLH and tPHL are the same as tPD Figure 1. Load Circuit and Voltage Waveforms 74LVC86A 6 of 10 June 2012 Document number: DS35264 Rev. 3 - 2 www.diodes.com © Diodes Incorporated

74LVC86A Ordering Information Package Packaging 13” Tape and Reel Device Code (Note 7) Quantity Part Number Suffix 74LVC86AS14-13 S14 SO-14 2500/Tape & Reel -13 74LVC86AT14-13 T14 TSSOP-14 2500/Tape & Reel -13 Notes: 7. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf Marking Information (1) SO-14, TSSOP-14 Part Number Package 74LVC86AS14 SO-14 74LVC86AT14 TSSOP-14 74LVC86A 7 of 10 June 2012 Document number: DS35264 Rev. 3 - 2 www.diodes.com © Diodes Incorporated

74LVC86A Package Outline Dimensions (All dimensions in mm.) Package Type: SO-14 SO-14 Dim Min Max E H Gauge Plane A 1.47 1.73 A1 0.10 0.25 L θ A2 1.45 Typ Detail “A” B 0.33 0.51 D 8.53 8.74 E 3.80 3.99 7°(4x) D A2 A He 5.810. 27 Ty6p. 20 L 0.38 1.27 B e θ 0° 8° Detail “A” All Dimensions in mm A1 Package Type: TSSOP-14 TSSOP-14 Dim Min Max 5 a1 7° (4X) 02. a2 0° 8° Pin# 1 Indent B L GSeaautgineg P Plalannee A 4.9 5.10 F1 2 B 4.30 4.50 a C ⎯ 1.2 F D 0.8 1.05 Detail ‘A’ F 1.00 Typ F1 0.45 0.75 G K G 0.65 Typ A K 0.19 0.30 L 6.40 Typ a1 D All Dimensions in mm C Detail ‘A’ 74LVC86A 8 of 10 June 2012 Document number: DS35264 Rev. 3 - 2 www.diodes.com © Diodes Incorporated

74LVC86A Suggested Pad Layout Package Type: SO-14 X Dimensions Value (in mm) C1 X 0.60 Y 1.50 C2 C1 5.4 C2 1.27 Y Package Type: TSSOP-14 X Dimensions Value (in mm) X 0.45 C1 Y 1.45 C1 5.9 C2 C2 0.65 Y 74LVC86A 9 of 10 June 2012 Document number: DS35264 Rev. 3 - 2 www.diodes.com © Diodes Incorporated

74LVC86A IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com 74LVC86A 10 of 10 June 2012 Document number: DS35264 Rev. 3 - 2 www.diodes.com © Diodes Incorporated

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: D iodes Incorporated: 74LVC86AS14-13 74LVC86AT14-13