74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state Rev. 5 — 13 March 2020 Product data sheet 1. General description The 74LVC541A is an octal non-inverting buffer/line driver with 5 V tolerant inputs and outputs. The 3-state outputs are controlled by the output enable inputs OE1 and OE2. This device is fully specified for partial power-down applications using I . The I circuitry OFF OFF disables the output, preventing the damaging backflow current through the device when it is powered down. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices as translators in mixed 3.3 V and 5 V applications. 2. Features and benefits • 5 V tolerant inputs for interlacing with 5 V logic • Wide supply voltage range from 1.2 V to 3.6 V • CMOS low power consumption • Direct interface with TTL levels • Complies with JEDEC standard: • JESD8-7A (1.65 V to 1.95 V) • JESD8-5A (2.3 V to 2.7 V) • JESD8-C/JESD36 (2.7 V to 3.6 V) • ESD protection: • HBM JESD22-A114F exceeds 2000 V • MM JESD22-A115B exceeds 200 V • CDM JESD22-C101E exceeds 1000 V • Specified from -40 °C to +85 °C and -40 °C to +125 °C 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74LVC541AD -40 °C to +125 °C SO20 plastic small outline package; 20 leads; SOT163-1 body width 7.5 mm 74LVC541ADB -40 °C to +125 °C SSOP20 plastic shrink small outline package; 20 leads; SOT339-1 body width 5.3 mm 74LVC541APW -40 °C to +125 °C TSSOP20 plastic thin shrink small outline package; 20 leads; SOT360-1 body width 4.4 mm 74LVC541ABQ -40 °C to +125 °C DHVQFN20 plastic dual in-line compatible thermal enhanced SOT764-1 very thin quad flat package; no leads; 20 terminals; body 2.5 × 4.5 × 0.85 mm

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state 4. Functional diagram A0 Y0 2 18 A1 Y1 3 17 A2 Y2 4 16 A3 Y3 5 15 A4 Y4 1 6 14 & 19 EN A5 Y5 7 13 2 18 3 17 A6 Y6 8 12 4 16 5 15 A7 Y7 6 14 9 11 7 13 8 12 OE1 1 9 11 OE2 19 mna898 mna900 Fig. 1. IEC logic symbol Fig. 2. Functional diagram 5. Pinning information 5.1. Pinning 74LVC541A 1 C terminal 1 E C index area O V 1 20 A0 2 19 OE2 A1 3 18 Y0 A2 4 17 Y1 A3 5 16 Y2 OE1 1 20 VCC A4 6 15 Y3 A0 2 19 OE2 A5 7 14 Y4 A1 3 18 Y0 A6 8 GND(1) 13 Y5 A2 4 17 Y1 A3 5 16 Y2 A7 9 12 Y6 74LVC541A 10 11 A4 6 15 Y3 D 7 A5 7 14 Y4 N Y 001aad116 G A6 8 13 Y5 Transparent top view A7 9 12 Y6 (1) This is not a ground pin. There is no electrical or GND 10 11 Y7 mechanical requirement to solder the pad. In case 001aad115 soldered, the solder land should remain floating or connected to GND. Fig. 3. Pin configuration for SOT163-1 (SO20), SOT339-1 (SSOP20) and SOT360-1 (TSSOP20) Fig. 4. Pin configuration for SOT764-1 (DHVQFN20) 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 2 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state 5.2. Pin description Table 2. Pin description Symbol Pin Description OE1 1 output enable input (active LOW) A0, A1, A2, A3, A4, A5, A6, A7 2, 3, 4, 5, 6, 7, 8, 9 data input GND 10 ground (0 V) Y0, Y1, Y2, Y3, Y4, Y5, Y6, Y7 18, 17, 16, 15, 14, 13, 12, 11 bus output OE2 19 output enable input (active LOW) V 20 supply voltage CC 6. Functional description Table 3. Functional table H = HIGH voltage level; L = LOW voltage level X = don’t care; Z = high-impedance OFF-state Input Output OE1 OE2 An Yn L L L L L L H H X H X Z H X X Z 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit V supply voltage -0.5 +6.5 V CC I input clamping current V < 0 V -50 - mA IK I V input voltage [1] -0.5 +5.5 V I I output clamping current V > V or V < 0 V - ±50 mA OK O CC O V output voltage output HIGH or LOW state [2] -0.5 V + 0.5 V O CC output 3-state or power-down [2] -0.5 +6.5 V I output current V = 0 V to V - ±50 mA O O CC I supply current - 100 mA CC I ground current -100 - mA GND T storage temperature -60 +150 °C stg P total power dissipation T = -40 °C to +125 °C [3] - 500 mW tot amb [1] The minimum input voltage ratings may be exceeded if the input current ratings are observed. [2] The output voltage ratings may be exceeded if the output current ratings are observed. [3] For SOT163-1 (SO20) package: Ptot derates linearly with 12.3 mW/K above 109 °C. For SOT339-1 (SSOP20) packages: Ptot derates linearly with 10.0 mW/K above 100 °C. For SOT360-1 (TSSOP20) package: Ptot derates linearly with 10.0 mW/K above 100 °C. For SOT764-1 (DHVQFN20) package: Ptot derates linearly with 12.9 mW/K above 111 °C. 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 3 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state 8. Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter Conditions Min Typ Max Unit V supply voltage 1.65 - 3.6 V CC functional 1.2 - - V V input voltage 0 - 5.5 V I V output voltage output HIGH or LOW state 0 - V V O CC output 3-state 0 - 5.5 V T ambient temperature -40 - +125 °C amb Δt/ΔV input transition rise and fall rate V = 2.3 V to 2.7 V 0 - 20 ns/V CC V = 2.7 V to 3.6 V 0 - 10 ns/V CC 9. Static characteristics Table 6. Static characteristics At recommended operating conditions. Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ[1] Max Min Max V HIGH-level input V = 1.2 V 1.08 - - 1.08 - V IH CC voltage V = 1.65 V to 1.95 V 0.65V - - 0.65V - V CC CC CC V = 2.3 V to 2.7 V 1.7 - - 1.7 - V CC V = 2.7 V to 3.6 V 2.0 - - 2.0 - V CC V LOW-level input V = 1.2 V - - 0.12 - 0.12 V IL CC voltage V = 1.65 V to 1.95 V - - 0.35V - 0.35V V CC CC CC V = 2.3 V to 2.7 V - - 0.7 - 0.7 V CC V = 2.7 V to 3.6 V - - 0.8 - 0.8 V CC V HIGH-level V = V or V OH I IH IL output voltage I = -100 μA; V = 1.65 V to 3.6 V V - 0.2 - - V - 0.3 - V O CC CC CC I = -4 mA; V = 1.65 V 1.2 - - 1.05 - V O CC I = -8 mA; V = 2.3 V 1.8 - - 1.65 - V O CC I = -12 mA; V = 2.7 V 2.2 - - 2.05 - V O CC I = -18 mA; V = 3.0 V 2.4 - - 2.25 - V O CC I = -24 mA; V = 3.0 V 2.2 - - 2.0 - V O CC V LOW-level V = V or V OL I IH IL output voltage I = 100 μA; V = 1.65 V to 3.6 V - - 0.2 - 0.3 V O CC I = 4 mA; V = 1.65 V - - 0.45 - 0.65 V O CC I = 8 mA; V = 2.3 V - - 0.6 - 0.8 V O CC I = 12 mA; V = 2.7 V - - 0.4 - 0.6 V O CC I = 24 mA; V = 3.0 V - - 0.55 - 0.8 V O CC I input leakage V = 5.5 V or GND; V = 3.6 V - ±0.1 ±5 - ±20 μA I I CC current I OFF-state output V = V or V ; V = 5.5 V or GND; - ±0.1 ±5 - ±20 μA OZ I IH IL O current V = 3.6 V CC I power-off V or V = 5.5 V; V = 0.0 V - ±0.1 ±10 - ±20 μA OFF I O CC leakage current 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 4 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state Symbol Parameter Conditions -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ[1] Max Min Max I supply current V = V or GND; I = 0 A; V = 3.6 V - 0.1 10 - 40 μA CC I CC O CC ΔI additional supply per input pin; V = V - 0.6 V; I = 0 A; - 5 500 - 5000 μA CC I CC O current V = 2.7 V to 3.6 V CC C input - 5.0 - - - pF I capacitance [1] All typical values are measured at VCC = 3.3 V (unless stated otherwise) and Tamb = 25 °C. 10. Dynamic characteristics Table 7. Dynamic characteristics Voltages are referenced to GND (ground = 0 V). For test circuit see Fig. 7. Symbol Parameter Conditions -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ [1] Max Min Max t propagation delay An to Yn; see Fig. 5 [2] pd V = 1.2 V - 14.0 - - - ns CC V = 1.65 V to 1.95 V 1.5 6.5 13.8 1.5 16.0 ns CC V = 2.3 V to 2.7 V 1.0 3.5 6.8 1.0 7.9 ns CC V = 2.7 V 1.5 3.5 5.6 1.5 7.0 ns CC V = 3.0 V to 3.6 V 1.0 2.9 5.1 1.0 6.5 ns CC t enable time OEn to Yn; see Fig. 6 [2] en V = 1.2 V - 20.0 - - - ns CC V = 1.65 V to 1.95 V 1.8 7.7 16.0 1.8 18.5 ns CC V = 2.3 V to 2.7 V 1.5 4.3 8.8 1.5 10.2 ns CC V = 2.7 V 1.5 4.4 7.5 1.5 9.5 ns CC V = 3.0 V to 3.6 V 1.0 3.5 7.0 1.0 9.0 ns CC t disable time OEn to Yn; see Fig. 6 [2] dis V = 1.2 V - 11.0 - - - ns CC V = 1.65 V to 1.95 V 3.0 4.9 10.3 3.0 11.9 ns CC V = 2.3 V to 2.7 V 1.0 2.7 5.9 1.0 6.8 ns CC V = 2.7 V 1.5 3.7 7.0 1.5 9.0 ns CC V = 3.0 V to 3.6 V 1.0 3.3 6.0 1.0 7.5 ns CC C power dissipation per input; V = GND to V [3] PD I CC capacitance V = 1.65 V to 1.95 V - 7.7 - - - pF CC V = 2.3 V to 2.7 V - 11.3 - - - pF CC V = 3.0 V to 3.6 V - 14.4 - - - pF CC [1] Typical values are measured at Tamb = 25 °C and VCC = 1.2 V, 1.8 V, 2.5 V, 2.7 V, and 3.3 V respectively. [2] tpd is the same as tPLH and tPHL. ten is the same as tPZL and tPZH. tdis is the same as tPLZ and tPHZ. [3] CPD is used to determine the dynamic power dissipation (PD in μW). PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where: fi = input frequency in MHz; fo = output frequency in MHz CL = output load capacitance in pF VCC = supply voltage in Volts N = number of inputs switching Σ(CL × VCC2 × fo) = sum of the outputs. 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 5 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state 10.1. Waveforms and test circuit VI An input VM GND tPHL tPLH VOH Yn output VM VOL mna901 Measurement points are given in Table 8. V and V are typical output voltage levels that occur with the output load. OL OH Fig. 5. Input (An) to output (Yn) propagation delays VI OEn input VM GND tPLZ tPZL VCC output LOW-to-OFF VM OFF-to-LOW VOL VX tPHZ tPZH VOH output VY HIGH-to-OFF VM OFF-to-HIGH GND outputs outputs outputs enabled disabled enabled mna902 Measurement points are given in Table 8. V and V are typical output voltage levels that occur with the output load. OL OH Fig. 6. 3-state enable and disable times Table 8. Measurement points Supply voltage Input Output V V V V V CC M M X Y < 2.7 V 0.5V 0.5V V + 0.15 V V - 0.15 V CC CC OL OH ≥ 2.7 V 1.5 V 1.5 V V + 0.3 V V - 0.3 V OL OH 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 6 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state tW VI 90 % negative pulse VM VM 10 % 0 V tf tr tr tf VI 90 % positive pulse VM VM 10 % 0 V tW VEXT VCC RL VI VO G DUT RT CL RL 001aae331 Test data is given in Table 9. Definitions for test circuit: R = Load resistance. L C = Load capacitance including jig and probe capacitance. L R = Termination resistance should be equal to output impedance Z of the pulse generator. T o V = External voltage for measuring switching times. EXT Fig. 7. Test circuit for measuring switching times Table 9. Test data Supply voltage Input Load V EXT V t, t C R t , t t , t t , t I r f L L PLH PHL PLZ PZL PHZ PZH 1.2 V V ≤ 2 ns 30 pF 1 kΩ open 2 × V GND CC CC 1.65 V to 1.95 V V ≤ 2 ns 30 pF 1 kΩ open 2 × V GND CC CC 2.3 V to 2.7 V V ≤ 2 ns 30 pF 500 Ω open 2 × V GND CC CC 2.7 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω open 2 × V GND CC 3.0 V to 3.6 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω open 2 × V GND CC 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 7 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state 11. Package outline SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 D E A X c y H E v M A Z 20 11 Q A 2 A A 1 (A 3 ) pin 1 index θ L p L 1 10 detail X e w M b p 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT mAax . A 1 A 2 A 3 b p c D (1) E (1) e H E L L p Q v w y Z (1) θ 0.3 2.45 0.49 0.32 13.0 7.6 10.65 1.1 1.1 0.9 mm 2.65 0.25 1.27 1.4 0.25 0.25 0.1 0.1 2.25 0.36 0.23 12.6 7.4 10.00 0.4 1.0 0.4 8 o 0.012 0.096 0.019 0.013 0.51 0.30 0.419 0.043 0.043 0.035 0 o inches 0.1 0.01 0.05 0.055 0.01 0.01 0.004 0.004 0.089 0.014 0.009 0.49 0.29 0.394 0.016 0.039 0.016 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT163-1 075E04 MS-013 03-02-19 Fig. 8. Package outline SOT163-1 (SO20) 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 8 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm SOT339-1 D E A X c y H E v M A Z 20 11 Q A 2 A A 1 (A 3 ) pin 1 index θ L p L 1 10 detail X w M e b p 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT mAax . A 1 A 2 A 3 b p c D (1) E (1) e H E L L p Q v w y Z (1) θ 0.21 1.80 0.38 0.20 7.4 5.4 7.9 1.03 0.9 0.9 8 o mm 2 0.05 1.65 0.25 0.25 0.09 7.0 5.2 0.65 7.6 1.25 0.63 0.7 0.2 0.13 0.1 0.5 0 o Note 1. Plastic or metal protrusions of 0.2 mm maximum per side are not included. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT339-1 MO-150 03-02-19 Fig. 9. Package outline SOT339-1 (SSOP20) 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 9 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1 D E A X c y H E v M A Z 20 11 Q A 2 (A 3 ) A pin 1 index A 1 θ L p L 1 10 detail X w M e b p 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT mAax . A 1 A 2 A 3 b p c D (1) E (2) e H E L L p Q v w y Z (1) θ 0.15 0.95 0.30 0.2 6.6 4.5 6.6 0.75 0.4 0.5 8 o mm 1.1 0.05 0.80 0.25 0.19 0.1 6.4 4.3 0.65 6.2 1 0.50 0.3 0.2 0.13 0.1 0.2 0 o Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT360-1 MO-153 03-02-19 Fig. 10. Package outline SOT360-1 (TSSOP20) 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 10 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state DHVQFN20: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 20 terminals; body 2.5 x 4.5 x 0.85 mm SOT764-1 D B A A A1 E c terminal 1 detail X index area terminal 1 index area e1 C v C A B e b y1C y w C 2 9 L 1 10 Eh e 20 11 19 12 Dh X 0 2.5 5 mm scale Dimensions (mm are the original dimensions) Unit A(1) A1 b c D(1) Dh E(1) Eh e e1 L v w y y1 max 1.00 0.05 0.30 4.6 3.15 2.6 1.15 0.5 mm nom 0.90 0.02 0.25 0.2 4.5 3.00 2.5 1.00 0.5 3.5 0.4 0.1 0.05 0.05 0.1 min 0.80 0.00 0.18 4.4 2.85 2.4 0.85 0.3 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. sot764-1_po Outline References European Issue date version IEC JEDEC JEITA projection 03-01-27 SOT764-1 - - - MO-241 - - - 14-12-12 Fig. 11. Package outline SOT764-1 (DHVQFN20) 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 11 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state 12. Abbreviations Table 10. Abbreviations Acronym Description CDM Charged Device Model CMOS Complementary Metal-Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 13. Revision history Table 11. Revision history Document ID Release date Data sheet status Change notice Supersedes 74LVC541A v.5 20200313 Product data sheet - 74LVC541A v.4 Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. • Legal texts have been adapted to the new company name where appropriate. • Table 4: Derating values for P total power dissipation updated. tot • Measurements points table added. • Package outline drawing SOT764-1 (DHVQFN20) updated. 74LVC541A v.4 20111125 Product data sheet - 74LVC541A v.3 Modifications: • The format of this document has been redesigned to comply with the new identity guidelines of NXP Semiconductors. • Legal texts have been adapted to the new company name where appropriate. • Table 4, Table 5, Table 6, Table 7 and Table 9: values added for lower voltage ranges. 74LVC541A v.3 20031112 Product specification - 74LVC541A v.2 74LVC541A v.2 20030514 Product specification - 74LVC541A v.1 74LVC541A v.1 19980729 Product specification - - 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 12 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state injury, death or severe property or environmental damage. Nexperia and its 14. Legal information suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Quick reference data — The Quick reference data is an extract of the Data sheet status product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Document status Product Definition Applications — Applications that are described herein for any of these [1][2] status [3] products are for illustrative purposes only. Nexperia makes no representation Objective [short] Development This document contains data from or warranty that such applications will be suitable for the specified use data sheet the objective specification for without further testing or modification. product development. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for Preliminary [short] Qualification This document contains data from any assistance with applications or customer product design. It is customer’s data sheet the preliminary specification. sole responsibility to determine whether the Nexperia product is suitable Product [short] Production This document contains the product and fit for the customer’s applications and products planned, as well as data sheet specification. for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. [1] Please consult the most recently issued document before initiating or completing a design. Nexperia does not accept any liability related to any default, damage, costs [2] The term 'short data sheet' is explained in section "Definitions". or problem which is based on any weakness or default in the customer’s [3] The product status of device(s) described in this document may have applications or products, or the application or use by customer’s third party changed since this document was published and may differ in case of customer(s). Customer is responsible for doing all necessary testing for the multiple devices. The latest product status information is available on customer’s applications and products using Nexperia products in order to the internet at https://www.nexperia.com. avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Definitions Limiting values — Stress above one or more limiting values (as defined in Draft — The document is a draft version only. The content is still under the Absolute Maximum Ratings System of IEC 60134) will cause permanent internal review and subject to formal approval, which may result in damage to the device. Limiting values are stress ratings only and (proper) modifications or additions. Nexperia does not give any representations or operation of the device at these or any other conditions above those warranties as to the accuracy or completeness of information included herein given in the Recommended operating conditions section (if present) or the and shall have no liability for the consequences of use of such information. Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect Short data sheet — A short data sheet is an extract from a full data sheet the quality and reliability of the device. with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain Terms and conditions of commercial sale — Nexperia products are detailed and full information. For detailed and full information see the relevant sold subject to the general terms and conditions of commercial sale, as full data sheet, which is available on request via the local Nexperia sales published at http://www.nexperia.com/profile/terms, unless otherwise agreed office. In case of any inconsistency or conflict with the short data sheet, the in a valid written individual agreement. In case an individual agreement is full data sheet shall prevail. concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general Product specification — The information and data provided in a Product terms and conditions with regard to the purchase of Nexperia products by data sheet shall define the specification of the product as agreed between customer. Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be No offer to sell or license — Nothing in this document may be interpreted valid in which the Nexperia product is deemed to offer functions and qualities or construed as an offer to sell products that is open for acceptance or the beyond those described in the Product data sheet. grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein Disclaimers may be subject to export control regulations. Export might require a prior Limited warranty and liability — Information in this document is believed authorization from competent authorities. to be accurate and reliable. However, Nexperia does not give any Non-automotive qualified products — Unless this data sheet expressly representations or warranties, expressed or implied, as to the accuracy states that this specific Nexperia product is automotive qualified, the or completeness of such information and shall have no liability for the product is not suitable for automotive use. It is neither qualified nor tested in consequences of use of such information. Nexperia takes no responsibility accordance with automotive testing or application requirements. Nexperia for the content in this document if provided by an information source outside accepts no liability for inclusion and/or use of non-automotive qualified of Nexperia. products in automotive equipment or applications. In no event shall Nexperia be liable for any indirect, incidental, punitive, In the event that customer uses the product for design-in and use in special or consequential damages (including - without limitation - lost automotive applications to automotive specifications and standards, profits, lost savings, business interruption, costs related to the removal customer (a) shall use the product without Nexperia’s warranty of the or replacement of any products or rework charges) whether or not such product for such automotive applications, use and specifications, and (b) damages are based on tort (including negligence), warranty, breach of whenever customer uses the product for automotive applications beyond contract or any other legal theory. Nexperia’s specifications such use shall be solely at customer’s own risk, Notwithstanding any damages that customer might incur for any reason and (c) customer fully indemnifies Nexperia for any liability, damages or failed whatsoever, Nexperia’s aggregate and cumulative liability towards customer product claims resulting from customer design and use of the product for for the products described herein shall be limited in accordance with the automotive applications beyond Nexperia’s standard warranty and Nexperia’s Terms and conditions of commercial sale of Nexperia. product specifications. Right to make changes — Nexperia reserves the right to make changes Translations — A non-English (translated) version of a document is for to information published in this document, including without limitation reference only. The English version shall prevail in case of any discrepancy specifications and product descriptions, at any time and without notice. This between the translated and English versions. document supersedes and replaces all information supplied prior to the publication hereof. Trademarks Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical Notice: All referenced brands, product names, service names and systems or equipment, nor in applications where failure or malfunction trademarks are the property of their respective owners. of an Nexperia product can reasonably be expected to result in personal 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 13 / 14

Nexperia 74LVC541A Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state Contents 1. General description......................................................1 2. Features and benefits..................................................1 3. Ordering information....................................................1 4. Functional diagram.......................................................2 5. Pinning information......................................................2 5.1. Pinning.........................................................................2 5.2. Pin description.............................................................3 6. Functional description.................................................3 7. Limiting values.............................................................3 8. Recommended operating conditions..........................4 9. Static characteristics....................................................4 10. Dynamic characteristics............................................5 10.1. Waveforms and test circuit........................................6 11. Package outline..........................................................8 12. Abbreviations............................................................12 13. Revision history........................................................12 14. Legal information......................................................13 © Nexperia B.V. 2020. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 13 March 2020 74LVC541A All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 5 — 13 March 2020 14 / 14