74LVC2G125 Dual bus buffer/line driver; 3-state Rev. 16 — 10 September 2018 Product data sheet 1. General description The 74LVC2G125 provides a dual non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (pin nOE). A HIGH-level at pin nOE causes the output to assume a high-impedance OFF-state. Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and fall times. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in a mixed 3.3 V and 5 V environment. This device is fully specified for partial power-down applications using I . The I circuitry OFF OFF disables the output, preventing a damaging backflow current through the device when it is powered down. 2. Features and benefits • Wide supply voltage range from 1.65 V to 5.5 V • 5 V tolerant input/output for interfacing with 5 V logic • High noise immunity • Complies with JEDEC standard: • • JESD8-7 (1.65 V to 1.95 V) • JESD8-5 (2.3 V to 2.7 V) • JESD8-B/JESD36 (2.7 V to 3.6 V) • ESD protection: • • HBM JESD22-A114F exceeds 2000 V • MM JESD22-A115-A exceeds 200 V • ±24 mA output drive (V = 3.0 V) CC • CMOS low-power consumption • Latch-up performance exceeds 250 mA • Direct interface with TTL levels • Inputs accept voltages up to 5 V • Multiple package options • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74LVC2G125DP -40 °C to +125 °C TSSOP8 plastic thin shrink small outline package; 8 leads; SOT505-2 body width 3 mm; lead length 0.5 mm 74LVC2G125DC -40 °C to +125 °C VSSOP8 plastic very thin shrink small outline package; SOT765-1 8 leads; body width 2.3 mm 74LVC2G125GT -40 °C to +125 °C XSON8 plastic extremely thin small outline package; SOT833-1 no leads; 8 terminals; body 1 × 1.95 × 0.5 mm 74LVC2G125GF -40 °C to +125 °C XSON8 extremely thin small outline package; no leads; SOT1089 8 terminals; body 1.35 × 1 × 0.5 mm 74LVC2G125GM -40 °C to +125 °C XQFN8 plastic, extremely thin quad flat package; SOT902-2 no leads; 8 terminals; body 1.6 × 1.6 × 0.5 mm 74LVC2G125GN -40 °C to +125 °C XSON8 extremely thin small outline package; no leads; SOT1116 8 terminals; body 1.2 × 1.0 × 0.35 mm 74LVC2G125GS -40 °C to +125 °C XSON8 extremely thin small outline package; no leads; SOT1203 8 terminals; body 1.35 × 1.0 × 0.35 mm 4. Marking Table 2. Marking codes Type number Marking code [1] 74LVC2G125DP V25 74LVC2G125DC V25 74LVC2G125GT V25 74LVC2G125GF VM 74LVC2G125GM V25 74LVC2G125GN VM 74LVC2G125GS VM [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code. 5. Functional diagram 74LVC2G125 74LVC2G125 1A 1Y 1 EN1 1OE 2A 2Y 2OE 2 EN2 mna941 001aae009 Fig. 1. Logic symbol Fig. 2. IEC logic symbol 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 2 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state 6. Pinning information 6.1. Pinning 74LVC2G125 1OE 1 8 VCC 1A 2 7 2OE 2Y 3 6 1Y GND 4 5 2A 001aab738 Fig. 3. Pin configuration SOT505-2 (TSSOP8) and SOT765-1 (VSSOP8) 74LVC2G125 74LVC2G125 terminal 1 C C index area V 1OE 1 8 VCC 8 2OE 1 7 1OE 1A 2 7 2OE 1Y 2 6 1A 2Y 3 6 1Y 2A 3 5 2Y 4 GND 4 5 2A D 001aab739 GN 001aae010 Transparent top view Transparent top view Fig. 4. Pin configuration SOT833-1, SOT1089, SOT1116 and SOT1203 (XSON8) Fig. 5. Pin configuration SOT902-2 (XQFN8) 6.2. Pin description Table 3. Pin description Symbol Pin Description SOT505-2, SOT765-1, SOT833-1, SOT902-2 SOT1089, SOT1116 and SOT1203 1OE, 2OE 1, 7 7, 1 output enable input (active LOW) 1A, 2A 2, 5 6, 3 data input GND 4 4 ground (0 V) 1Y, 2Y 6, 3 2, 5 data output V 8 8 supply voltage CC 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 3 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state 7. Functional description Table 4. Function table H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state. Control Input Output nOE nA nY L L L L H H H X Z 8. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground 0 V). Symbol Parameter Conditions Min Max Unit V supply voltage -0.5 +6.5 V CC I input clamping current V < 0 V -50 - mA IK I V input voltage [1] -0.5 +6.5 V I I output clamping current V > V or V < 0 V - ±50 mA OK O CC O V output voltage Enable mode [1] -0.5 V + 0.5 V O CC Disable mode [1] -0.5 +6.5 V Power-down mode; V = 0 V [1] -0.5 +6.5 V CC I output current V = 0 V to V - ±50 mA O O CC I supply current - 100 mA CC I ground current -100 - mA GND T storage temperature -65 +150 °C stg P total power dissipation T = -40 °C to +125 °C [2] - 300 mW tot amb [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For TSSOP8 package: above 55 °C the value of Ptot derates linearly with 2.5 mW/K. For VSSOP8 package: above 110 °C the value of Ptot derates linearly with 8 mW/K. For XSON8, XQFN8 packages: above 118 °C the value of Ptot derates linearly with 7.8 mW/K. 9. Recommended operating conditions Table 6. Operating conditions Symbol Parameter Conditions Min Max Unit V supply voltage 1.65 5.5 V CC V input voltage 0 5.5 V I V output voltage V = 1.65 V to 5.5 V; Enable mode 0 V V O CC CC V = 1.65 V to 5.5 V; Disable mode 0 5.5 V CC V = 0 V; Power-down mode 0 5.5 V CC T ambient temperature -40 +125 °C amb Δt/ΔV input transition rise and fall rate V = 1.65 V to 2.7 V - 20 ns/V CC V = 2.7 V to 5.5 V - 10 ns/V CC 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 4 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state 10. Static characteristics Table 7. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground 0 V). Symbol Parameter Conditions T = -40 °C to +85 °C T = Unit amb amb -40 °C to +125 °C Min Typ [1] Max Min Max V HIGH-level V = 1.65 V to 1.95 V 0.65V - - 0.65V - V IH CC CC CC input voltage V = 2.3 V to 2.7 V 1.7 - - 1.7 - V CC V = 2.7 V to 3.6 V 2.0 - - 2.0 - V CC V = 4.5 V to 5.5 V 0.7V - - 0.7V - V CC CC CC V LOW-level V = 1.65 V to 1.95 V - - 0.35V - 0.35V V IL CC CC CC input voltage V = 2.3 V to 2.7 V - - 0.7 - 0.7 V CC V = 2.7 V to 3.6 V - - 0.8 - 0.8 V CC V = 4.5 V to 5.5 V - - 0.3V - 0.3V V CC CC CC V LOW-level V = V or V OL I IH IL output voltage I = 100 μA; - - 0.1 - 0.1 V O V = 1.65 V to 5.5 V CC I = 4 mA; V = 1.65 V - - 0.45 - 0.70 V O CC I = 8 mA; V = 2.3 V - - 0.3 - 0.45 V O CC I = 12 mA; V = 2.7 V - - 0.4 - 0.60 V O CC I = 24 mA; V = 3.0 V - - 0.55 - 0.80 V O CC I = 32 mA; V = 4.5 V - - 0.55 - 0.80 V O CC V HIGH-level V = V or V OH I IH IL output voltage I = -100 μA; V - 0.1 - - V - 0.1 - V O CC CC V = 1.65 V to 5.5 V CC I = -4 mA; V = 1.65 V 1.2 - - 0.95 - V O CC I = -8 mA; V = 2.3 V 1.9 - - 1.7 - V O CC I = -12 mA; V = 2.7 V 2.2 - - 1.9 - V O CC I = -24 mA; V = 3.0 V 2.3 - - 2.0 - V O CC I = -32 mA; V = 4.5 V 3.8 - - 3.4 - V O CC I input leakage V = 5.5 V or GND; - ±0.1 ±1 - ±1 μA I I current V = 0 V to 5.5 V CC I OFF-state V = V or V ; - ±0.1 ±2 - ±2 μA OZ I IH IL output current V = 5.5 V or GND; V = 3.6 V O CC I power-off V or V = 5.5 V; V = 0 V - ±0.1 ±2 - ±2 μA OFF I O CC leakage current I supply current V = 5.5 V or GND; - 0.1 4 - 4 μA CC I V = 1.65 V to 5.5 V; I = 0 A CC O ΔI additional per pin; V = V - 0.6 V; - 5 500 - 500 μA CC I CC supply current I = 0 A; V = 2.3 V to 5.5 V O CC C input capacitance - 2 - - - pF I [1] Typical values are measured at VCC = 3.3 V and at Tamb = 25 °C. 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 5 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state 11. Dynamic characteristics Table 8. Dynamic characteristics Voltages are referenced to GND (ground 0 V); for test circuit see Fig. 8. Symbol Parameter Conditions T = -40 °C to +85 °C T = Unit amb amb -40 °C to +125 °C Min Typ [1] Max Min Max t propagation nA to nY; see Fig. 6 [2] pd delay V = 1.65 V to 1.95 V 1.0 3.7 9.1 1.0 11.4 ns CC V = 2.3 V to 2.7 V 0.5 2.5 4.8 0.5 6.0 ns CC V = 2.7 V 1.0 2.7 4.8 1.0 6.0 ns CC V = 3.0 V to 3.6 V 0.5 2.3 4.3 0.5 5.5 ns CC V = 4.5 V to 5.5 V 0.5 1.9 3.7 0.5 4.6 ns CC t enable time nOE to nY; see Fig. 7 [3] en V = 1.65 V to 1.95 V 1.5 4.3 9.9 1.5 12.4 ns CC V = 2.3 V to 2.7 V 1.0 2.8 5.6 1.0 7.0 ns CC V = 2.7 V 1.5 3.3 5.7 1.5 7.1 ns CC V = 3.0 V to 3.6 V 0.5 2.4 4.7 0.5 5.9 ns CC V = 4.5 V to 5.5 V 0.5 2.0 3.8 0.5 4.8 ns CC t disable time nOE to nY; see Fig. 7 [4] dis V = 1.65 V to 1.95 V 1.0 3.5 11.6 1.0 14.1 ns CC V = 2.3 V to 2.7 V 0.5 1.8 5.8 0.5 7.6 ns CC V = 2.7 V 1.0 2.7 4.8 1.0 6.2 ns CC V = 3.0 V to 3.6 V 1.0 2.7 4.6 1.0 5.9 ns CC V = 4.5 V to 5.5 V 0.5 1.8 3.4 0.5 4.6 ns CC C power dissipation per buffer; V = GND to V [5] PD I CC capacitance output enabled - 18 - - - pF output disabled - 5 - - - pF [1] Typical values are measured at nominal VCC and at Tamb = 25 °C. [2] tpd is the same as tPLH and tPHL. [3] ten is the same as tPZH and tPZL. [4] tdis is the same as tPLZ and tPHZ. [5] CPD is used to determine the dynamic power dissipation (PD in μW). PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; Σ(CL × VCC2 × fo) = sum of outputs. 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 6 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state 11.1. Waveforms and test circuit VI nA input VM GND tPHL tPLH VOH nY output VM VOL mna230 Measurement points are given in Table 9. Logic levels: V and V are typical output voltage levels that occur with the output load. OL OH Fig. 6. Propagation delay input (nA) to output (nY) VI nOE input VM GND tPLZ tPZL VCC output LOW-to-OFF VM OFF-to-LOW VOL VX tPHZ tPZH VOH VY output HIGH-to-OFF VM OFF-to-HIGH GND outputs outputs outputs enabled disabled enabled mna362 Measurement points are given in Table 9. Logic levels: V and V are typical output voltage levels that occur with the output load. OL OH Fig. 7. 3-state output enable and disable times Table 9. Measurement points Supply voltage Input Output V V V V V CC M M X Y 1.65 V to 1.95 V 0.5V 0.5V V + 0.15 V V - 0.15 V CC CC OL OH 2.3 V to 2.7 V 0.5V 0.5V V + 0.15 V V - 0.15 V CC CC OL OH 2.7 V 1.5 V 1.5 V V + 0.3 V V - 0.3 V OL OH 3.0 V to 3.6 V 1.5 V 1.5 V V + 0.3 V V - 0.3 V OL OH 4.5 V to 5.5 V 0.5V 0.5V V + 0.3 V V - 0.3 V CC CC OL OH 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 7 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state tW VI 90 % negative pulse VM VM 10 % 0 V tf tr tr tf VI 90 % positive pulse VM VM 10 % 0 V tW VEXT VCC RL VI VO PULSE DUT GENERATOR RT CL RL 001aae235 Test data is given in Table 10. Definitions for test circuit: R = Load resistor. L C = Load capacitance including jig and probe capacitance. L R = Termination resistance should be equal to output impedance Z of the pulse generator. T o V = Test voltage for switching times. EXT Fig. 8. Test circuit for measuring switching times Table 10. Test data Supply voltage Input Load V EXT V V t, t C R t , t t , t t , t CC I r f L L PLH PHL PZH PHZ PZL PLZ 1.65 V to 1.95 V V ≤ 2.0 ns 30 pF 1 kΩ open GND 2V CC CC 2.3 V to 2.7 V V ≤ 2.0 ns 30 pF 500 Ω open GND 2V CC CC 2.7 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω open GND 6 V 3.0 V to 3.6 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω open GND 6 V 4.5 V to 5.5 V V ≤ 2.5 ns 50 pF 500 Ω open GND 2V CC CC 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 8 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state 12. Package outline TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm SOT505-2 D E A X c y HE v M A Z 8 5 A A2 A1 (A3) pin 1 index θ Lp L 1 4 detail X e w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT mAax . A1 A2 A3 bp c D(1) E(1) e HE L Lp v w y Z(1) θ 0.15 0.95 0.38 0.18 3.1 3.1 4.1 0.47 0.70 8° mm 1.1 0.25 0.65 0.5 0.2 0.13 0.1 0.00 0.75 0.22 0.08 2.9 2.9 3.9 0.33 0.35 0° Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION SOT505-2 - - - 02-01-16 Fig. 9. Package outline SOT505-2 (TSSOP8) 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 9 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 D E A X c y HE v A Z 8 5 Q A2 A pin 1 index A1 (A3) θ Lp 1 4 detail X L e w bp 0 5 mm scale Dimensions (mm are the original dimensions) A Unit max. A1 A2 A3 bp c D(1) E(2) e HE L Lp Q v w y Z(1) θ max 0.15 0.85 0.27 0.23 2.1 2.4 3.2 0.40 0.21 0.4 8° mm nom 1 0.12 0.5 0.4 0.2 0.08 0.1 min 0.00 0.60 0.17 0.08 1.9 2.2 3.0 0.15 0.19 0.1 0° Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. sot765-1_po Outline References European Issue date version IEC JEDEC JEITA projection 07-06-02 SOT765-1 MO-187 16-05-31 Fig. 10. Package outline SOT765-1 (VSSOP8) 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 10 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm SOT833-1 b 1 2 3 4 4× L1 L (2) e 8 7 6 5 e1 e1 e1 8× A (2) A1 D E terminal 1 index area 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT mA(a1x) mAa1x b D E e e1 L L1 0.25 2.0 1.05 0.35 0.40 mm 0.5 0.04 0.6 0.5 0.17 1.9 0.95 0.27 0.32 Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 07-11-14 SOT833-1 - - - MO-252 - - - 07-12-07 Fig. 11. Package outline SOT833-1 (XSON8) 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 11 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state XSON8: extremely thin small outline package; no leads; 8 terminals; body 1.35 x 1 x 0.5 mm SOT1089 E terminal 1 index area D A A1 detail X (4×)(2) e L (8×)(2) b 4 5 e1 1 8 terminal 1 index area L1 X 0 0.5 1 mm scale Dimensions Unit A(1) A1 b D E e e1 L L1 max 0.5 0.04 0.20 1.40 1.05 0.35 0.40 mm nom 0.15 1.35 1.00 0.55 0.35 0.30 0.35 min 0.12 1.30 0.95 0.27 0.32 Note 1. Including plating thickness. 2. Visible depending upon used manufacturing technology. sot1089_po Outline References European Issue date version IEC JEDEC JEITA projection 10-04-09 SOT1089 MO-252 10-04-12 Fig. 12. Package outline SOT1089 (XSON8) 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 12 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state XQFN8: plastic, extremely thin quad flat package; no leads; 8 terminals; body 1.6 x 1.6 x 0.5 mm SOT902-2 X D B A terminal 1 index area E A A1 detail X e C v C A B b w C y1C y 4 3 5 e1 terminal 1 index area 2 6 k L 1 7 8 metal area L2 not for soldering L k L3 L1 0 1 2 mm scale Dimensions Unit(1) A A1 b D E e e1 k L L1 L2 L3 v w y y1 max 0.5 0.05 0.25 1.65 1.65 0.35 0.15 0.25 0.35 mm nom 0.20 1.60 1.60 0.55 0.5 0.30 0.10 0.20 0.30 0.1 0.05 0.05 0.05 min 0.00 0.15 1.55 1.55 0.2 0.25 0.05 0.15 0.25 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. sot902-2_po Outline References European Issue date version IEC JEDEC JEITA projection 16-07-14 SOT902-2 - - - MO-255 - - - 16-11-08 Fig. 13. Package outline SOT902-2 (XQFN8) 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 13 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state XSON8: extremely thin small outline package; no leads; 8 terminals; body 1.2 x 1.0 x 0.35 mm SOT1116 b 1 2 3 4 (4×)(2) L1 L e 8 7 6 5 e1 e1 e1 (8×)(2) A1 A D E terminal 1 index area 0 0.5 1 mm scale Dimensions Unit A(1) A1 b D E e e1 L L1 max 0.35 0.04 0.20 1.25 1.05 0.35 0.40 mm nom 0.15 1.20 1.00 0.55 0.3 0.30 0.35 min 0.12 1.15 0.95 0.27 0.32 Note 1. Including plating thickness. 2. Visible depending upon used manufacturing technology. sot1116_po Outline References European Issue date version IEC JEDEC JEITA projection 10-04-02 SOT1116 10-04-07 Fig. 14. Package outline SOT1116 (XSON8) 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 14 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state XSON8: extremely thin small outline package; no leads; 8 terminals; body 1.35 x 1.0 x 0.35 mm SOT1203 b 1 2 3 4 (4×)(2) L1 L e 8 7 6 5 e1 e1 e1 (8×)(2) A1 A D E terminal 1 index area 0 0.5 1 mm scale Dimensions Unit A(1) A1 b D E e e1 L L1 max 0.35 0.04 0.20 1.40 1.05 0.35 0.40 mm nom 0.15 1.35 1.00 0.55 0.35 0.30 0.35 min 0.12 1.30 0.95 0.27 0.32 Note 1. Including plating thickness. 2. Visible depending upon used manufacturing technology. sot1203_po Outline References European Issue date version IEC JEDEC JEITA projection 10-04-02 SOT1203 10-04-06 Fig. 15. Package outline SOT1203 (XSON8) 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 15 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state 13. Abbreviations Table 11. Abbreviations Acronym Description CMOS Complementary Metal-Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 14. Revision history Table 12. Revision history Document ID Release date Data sheet status Change notice Supersedes 74LVC2G125 v.16 20180910 Product data sheet - 74LVC2G125 v.15 Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. • Legal texts have been adapted to the new company name where appropriate. • Type numbers 74LVC2G125GD and (SOT996-2) removed. 74LVC2G125 v.15 20161215 Product data sheet - 74LVC2G125 v.14 Modifications: • Table 7: The maximum limits for leakage current and supply current have changed. 74LVC2G125 v.14 20130329 Product data sheet - 74LVC2G125 v.13 Modifications: • For type number 74LVC2G125GD XSON8U has changed to XSON8. 74LVC2G125 v.13 20120622 Product data sheet - 74LVC2G125 v.12 Modifications: • For type number 74LVC2G125GM the SOT code has changed to SOT902-2. 74LVC2G125 v.12 20111201 Product data sheet - 74LVC2G125 v.11 Modifications: • Legal pages updated. 74LVC2G125 v.11 20100909 Product data sheet - 74LVC2G125 v.10 74LVC2G125 v.10 20080611 Product data sheet - 74LVC2G125 v.9 74LVC2G125 v.9 20080226 Product data sheet - 74LVC2G125 v.8 74LVC2G125 v.8 20070907 Product data sheet - 74LVC2G125 v.7 74LVC2G125 v.7 20060523 Product data sheet - 74LVC2G125 v.6 74LVC2G125 v.6 20051223 Product data sheet - 74LVC2G125 v.5 74LVC2G125 v.5 20050201 Product specification - 74LVC2G125 v.4 74LVC2G125 v.4 20040922 Product specification - 74LVC2G125 v.3 74LVC2G125 v.3 20040109 Product specification - 74LVC2G125 v.2 74LVC2G125 v.2 20030901 Product specification - 74LVC2G125 v.1 74LVC2G125 v.1 20030310 Product specification - - 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 16 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state injury, death or severe property or environmental damage. Nexperia and its 15. Legal information suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Quick reference data — The Quick reference data is an extract of the Data sheet status product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Document status Product Definition Applications — Applications that are described herein for any of these [1][2] status [3] products are for illustrative purposes only. Nexperia makes no representation Objective [short] Development This document contains data from or warranty that such applications will be suitable for the specified use data sheet the objective specification for without further testing or modification. product development. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for Preliminary [short] Qualification This document contains data from any assistance with applications or customer product design. It is customer’s data sheet the preliminary specification. sole responsibility to determine whether the Nexperia product is suitable Product [short] Production This document contains the product and fit for the customer’s applications and products planned, as well as data sheet specification. for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. [1] Please consult the most recently issued document before initiating or completing a design. Nexperia does not accept any liability related to any default, damage, costs [2] The term 'short data sheet' is explained in section "Definitions". or problem which is based on any weakness or default in the customer’s [3] The product status of device(s) described in this document may have applications or products, or the application or use by customer’s third party changed since this document was published and may differ in case of customer(s). Customer is responsible for doing all necessary testing for the multiple devices. The latest product status information is available on customer’s applications and products using Nexperia products in order to the internet at https://www.nexperia.com. avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Definitions Limiting values — Stress above one or more limiting values (as defined in Draft — The document is a draft version only. The content is still under the Absolute Maximum Ratings System of IEC 60134) will cause permanent internal review and subject to formal approval, which may result in damage to the device. Limiting values are stress ratings only and (proper) modifications or additions. Nexperia does not give any representations or operation of the device at these or any other conditions above those warranties as to the accuracy or completeness of information included herein given in the Recommended operating conditions section (if present) or the and shall have no liability for the consequences of use of such information. Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect Short data sheet — A short data sheet is an extract from a full data sheet the quality and reliability of the device. with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain Terms and conditions of commercial sale — Nexperia products are detailed and full information. For detailed and full information see the relevant sold subject to the general terms and conditions of commercial sale, as full data sheet, which is available on request via the local Nexperia sales published at http://www.nexperia.com/profile/terms, unless otherwise agreed office. In case of any inconsistency or conflict with the short data sheet, the in a valid written individual agreement. In case an individual agreement is full data sheet shall prevail. concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general Product specification — The information and data provided in a Product terms and conditions with regard to the purchase of Nexperia products by data sheet shall define the specification of the product as agreed between customer. Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be No offer to sell or license — Nothing in this document may be interpreted valid in which the Nexperia product is deemed to offer functions and qualities or construed as an offer to sell products that is open for acceptance or the beyond those described in the Product data sheet. grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein Disclaimers may be subject to export control regulations. Export might require a prior Limited warranty and liability — Information in this document is believed authorization from competent authorities. to be accurate and reliable. However, Nexperia does not give any Non-automotive qualified products — Unless this data sheet expressly representations or warranties, expressed or implied, as to the accuracy states that this specific Nexperia product is automotive qualified, the or completeness of such information and shall have no liability for the product is not suitable for automotive use. It is neither qualified nor tested in consequences of use of such information. Nexperia takes no responsibility accordance with automotive testing or application requirements. Nexperia for the content in this document if provided by an information source outside accepts no liability for inclusion and/or use of non-automotive qualified of Nexperia. products in automotive equipment or applications. In no event shall Nexperia be liable for any indirect, incidental, punitive, In the event that customer uses the product for design-in and use in special or consequential damages (including - without limitation - lost automotive applications to automotive specifications and standards, profits, lost savings, business interruption, costs related to the removal customer (a) shall use the product without Nexperia’s warranty of the or replacement of any products or rework charges) whether or not such product for such automotive applications, use and specifications, and (b) damages are based on tort (including negligence), warranty, breach of whenever customer uses the product for automotive applications beyond contract or any other legal theory. Nexperia’s specifications such use shall be solely at customer’s own risk, Notwithstanding any damages that customer might incur for any reason and (c) customer fully indemnifies Nexperia for any liability, damages or failed whatsoever, Nexperia’s aggregate and cumulative liability towards customer product claims resulting from customer design and use of the product for for the products described herein shall be limited in accordance with the automotive applications beyond Nexperia’s standard warranty and Nexperia’s Terms and conditions of commercial sale of Nexperia. product specifications. Right to make changes — Nexperia reserves the right to make changes Translations — A non-English (translated) version of a document is for to information published in this document, including without limitation reference only. The English version shall prevail in case of any discrepancy specifications and product descriptions, at any time and without notice. This between the translated and English versions. document supersedes and replaces all information supplied prior to the publication hereof. Trademarks Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical Notice: All referenced brands, product names, service names and systems or equipment, nor in applications where failure or malfunction trademarks are the property of their respective owners. of an Nexperia product can reasonably be expected to result in personal 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 17 / 18

Nexperia 74LVC2G125 Dual bus buffer/line driver; 3-state Contents 1. General description......................................................1 2. Features and benefits..................................................1 3. Ordering information....................................................2 4. Marking..........................................................................2 5. Functional diagram.......................................................2 6. Pinning information......................................................3 6.1. Pinning.........................................................................3 6.2. Pin description.............................................................3 7. Functional description.................................................4 8. Limiting values.............................................................4 9. Recommended operating conditions..........................4 10. Static characteristics..................................................5 11. Dynamic characteristics.............................................6 11.1. Waveforms and test circuit........................................7 12. Package outline..........................................................9 13. Abbreviations............................................................16 14. Revision history........................................................16 15. Legal information......................................................17 © Nexperia B.V. 2018. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 10 September 2018 74LVC2G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 16 — 10 September 2018 18 / 18