74LVC11 Triple 3-input AND gate Rev. 7 — 10 November 2017 Product data sheet 1 General description The 74LVC11 provides three 3-input AND functions. 2 Features and benefits • Wide supply voltage range from 1.2 V to 3.6 V • Inputs accept voltages up to 5.5 V • CMOS low power consumption • Direct interface with TTL levels • Complies with JEDEC standard: –JESD8-7A (1.65 V to 1.95 V) –JESD8-5A (2.3 V to 2.7 V) –JESD8-C/JESD36 (2.7 V to 3.6 V) • ESD protection: –HBM JESD22-A114F exceeds 2000 V –MM JESD22-A115-B exceeds 200 V –CDM JESD22-C101E exceeds 1000 V • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Nexperia 74LVC11 Triple 3-input AND gate 3 Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74LVC11D -40 °C to +125 °C SO14 plastic small outline package; 14 leads; SOT108-1 body width 3.9 mm 74LVC11DB -40 °C to +125 °C SSOP14 plastic shrink small outline package; 14 leads; SOT337-1 body width 5.3 mm 74LVC11PW -40 °C to +125 °C TSSOP14 plastic thin shrink small outline package; 14 leads; SOT402-1 body width 4.4 mm 74LVC11BQ -40 °C to +125 °C DHVQFN14 plastic dual in-line compatible thermal enhanced SOT762-1 very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm 4 Functional diagram 1 1 1A 2 & 12 2 1B 1Y 12 13 13 1C 3 3 2A 4 2B 2Y 6 4 & 6 5 5 2C A 9 3A 9 10 3B 3Y 8 10 & 8 B Y 11 3C 11 C mna793 mna792 mna794 Figure 1.  Logic symbol Figure 2.  IEC logic symbol Figure 3.  Logic diagram for one gate 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 2 / 15

Nexperia 74LVC11 Triple 3-input AND gate 5 Pinning information 5.1 Pinning 74LVC11 C terminal 1 A C 1 V index area 1 14 1B 2 13 1C 2A 3 12 1Y 2B 4 11 3C 2C 5 GND(1) 10 3B 74LVC11 2Y 6 9 3A 7 8 1A 1 14 VCC 74LVC11 GND 3Y 001aad044 1B 2 13 1C 1A 1 14 VCC Transparenttopview 2A 3 12 1Y 1B 2 13 1C (1) This is not a supply pin. The 2A 3 12 1Y substrate is attached to this pad using 2B 4 11 3C 2B 4 11 3C conductive die attach material. There is 2C 5 10 3B 2C 5 10 3B no electrical or mechanical requirement 2Y 6 9 3A 2Y 6 9 3A to solder this pad.However, if it is GND 7 8 3Y soldered, the solder land should remain GND 7 8 3Y aaa-027674 floating or be connected to GND. 001aad043 Figure 5.  Pin configuration for Figure 6.  Pin configuration for Figure 4.  Pin configuration for SO14 (T)SSOP14 DHVQFN14 5.2 Pin description Table 2. Pin description Symbol Pin Description 1A, 2A, 3A 1, 3, 9 data input 1B, 2B, 3B 2, 4, 10 data input 1C, 2C, 3C 13, 5, 11 data input 1Y, 2Y, 3Y 12, 6, 8 data output GND 7 ground (0 V) V 14 supply voltage CC 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 3 / 15

Nexperia 74LVC11 Triple 3-input AND gate 6 Functional description Table 3. Function selection H = HIGH voltage level; L = LOW voltage level; X = don’t care Input Output nA nB nC nY L X X L X L X L X X L L H H H H 7 Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit V supply voltage -0.5 +6.5 V CC I input clamping current V < 0 V -50 - mA IK I [1] V input voltage -0.5 +6.5 V I I output clamping current V > V or V < 0 V - ±50 mA OK O CC O [2] V output voltage -0.5 V + 0.5 V O CC I output current V = 0 V to V - ±50 mA O O CC I supply current - 100 mA CC I ground current -100 - mA GND [3] P total power dissipation T = -40 °C to +125 °C - 500 mW tot amb T storage temperature -65 +150 °C stg [1] The minimum input voltage ratings may be exceeded if the input current ratings are observed. [2] The output voltage ratings may be exceeded if the output current ratings are observed. [3] For SO14 packages: above 70 °C the value of PD derates linearly with 8 mW/K. For (T)SSOP14 packages: above 60 °C the value of PD derates linearly with 5.5 mW/K. For DHVQFN14 packages: above 60 °C the value of PD derates linearly with 4.5 mW/K. 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 4 / 15

Nexperia 74LVC11 Triple 3-input AND gate 8 Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter Conditions Min Typ Max Unit V supply voltage 1.65 - 3.6 V CC functional 1.2 - - V V input voltage 0 - 5.5 V I V output voltage 0 - V V O CC T ambient temperature -40 - +125 °C amb Δt/ΔV input transition rise and fall V = 1.65 V to 2.7 V 0 - 20 ns/V CC rate V = 2.7 V to 3.6 V 0 - 10 ns/V CC 9 Static characteristics Table 6. Static characteristics At recommended operating conditions. Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions -40 °C to +85 °C -40 °C to +125 °C Unit [1] Min Typ Max Min Max V HIGH-level V = 1.2 V 1.08 - - 1.08 - V IH CC input voltage V = 1.65 V to 1.95 V 0.65xV - - 0.65xV - V CC CC CC V = 2.3 V to 2.7 V 1.7 - - 1.7 - V CC V = 2.7 V to 3.6 V 2.0 - - 2.0 - V CC V LOW-level V = 1.2 V - - 0.12 - 0.12 V IL CC input voltage V = 1.65 V to 1.95 V - - 0.35xV - 0.35xV V CC CC CC V = 2.3 V to 2.7 V - - 0.7 - 0.7 V CC V = 2.7 V to 3.6 V - - 0.8 - 0.8 V CC V HIGH-level V = V or V OH I IH IL output voltage I = -100 μA; V = 1.65 V to 3.6 V V -0.2 - - V -0.3 - V O CC CC CC I = -4 mA; V = 1.65 V 1.2 - - 1.05 - V O CC I = -8 mA; V = 2.3 V 1.8 - - 1.65 - V O CC I = -12 mA; V = 2.7 V 2.2 - - 2.05 - V O CC I = -18 mA; V = 3.0 V 2.4 - - 2.25 - V O CC I = -24 mA; V = 3.0 V 2.2 - - 2.0 - V O CC 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 5 / 15

Nexperia 74LVC11 Triple 3-input AND gate Symbol Parameter Conditions -40 °C to +85 °C -40 °C to +125 °C Unit [1] Min Typ Max Min Max V LOW-level V = V or V OL I IH IL output voltage I = 100 μA; V = 1.65 V to 3.6 V - - 0.2 - 0.3 V O CC I = 4 mA; V = 1.65 V - - 0.45 - 0.65 V O CC I = 8 mA; V = 2.3 V - - 0.6 - 0.8 V O CC I = 12 mA; V = 2.7 V - - 0.4 - 0.6 V O CC I = 24 mA; V = 3.0 V - - 0.55 - 0.8 V O CC I input leakage V = 3.6 V; V = 5.5 V or GND - ±0.1 ±5 - ±20 μA I CC I current I supply current V = 3.6 V; V = V or GND; I = 0 A - 0.1 10 - 40 μA CC CC I CC O ΔI additional per input pin; V = 2.7 V to 3.6 V; - 5 500 - 5000 μA CC CC supply current V = V - 0.6 V; I = 0 A I CC O C input V = 0 V to 3.6 V; V = GND to V - 5.0 - - - pF I CC I CC capacitance [1] All typical values are measured at VCC = 3.3 V (unless stated otherwise) and Tamb = 25 °C. 10 Dynamic characteristics Table 7. Dynamic characteristics Voltages are referenced to GND (ground = 0 V). For test circuit see Figure 8. Symbol Parameter Conditions -40 °C to +85 °C -40 °C to +125 °C Unit [1] Min Typ Max Min Max [2] t propagation delay nA, nB, nC to nY; see Figure 7 pd V = 1.2 V - 14.0 - - - ns CC V = 1.65 V to 1.95 V 1.0 4.7 12.2 1.0 14.1 ns CC V = 2.3 V to 2.7 V 1.5 2.8 6.9 1.5 8.0 ns CC V = 2.7 V 1.5 2.9 7.0 1.5 8.1 ns CC V = 3.0 V to 3.6 V 1.5 2.5 6.2 1.5 7.2 ns CC [3] C power dissipation per gate; V = GND to V PD I CC capacitance V = 1.65 V to 1.95 V - 3.1 - - - pF CC V = 2.3 V to 2.7 V - 6.2 - - - pF CC V = 3.0 V to 3.6 V - 9.0 - - - pF CC [1] Typical values are measured at Tamb = 25 °C and VCC = 1.2 V, 1.8 V, 2.5 V, 2.7 V, and 3.3 V respectively. [2] tpd is the same as tPLH and tPHL. [3] CPD is used to determine the dynamic power dissipation (PD in μW). PD = CPD x VCC2 x fi x N + Σ(CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz CL = output load capacitance in pF VCC = supply voltage in Volts N = number of inputs switching Σ(CL × VCC2 x fo) = sum of the outputs 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 6 / 15

Nexperia 74LVC11 Triple 3-input AND gate 10.1 Waveforms and test circuit tW VI 90% negative pulse VM VM 10% 0V tf tr tr tf VI 90% positive pulse VM VM 10% 0V tW VI VCC nA,nB,nCinput VM VI VO PULSE GND GENERATOR DUT tPHL tPLH RT CL RL VOH nYoutput VM 001aaf615 VOL mna795 Test data is given in Table 8. V = 1.5 V at V ≥ 2.7 V. Definitions for test circuit: M CC VM = 0.5 x VCC at VCC < 2.7 V. RL = Load resistance. VOL and VOH are typical output voltage levels that occur with CL = Load capacitance including jig and probe capacitance. the output load. R = Termination resistance should be equal to output T impedance Z of the pulse generator. Figure 7.  Input (nA, nB and nC) to output (nY) o propagation delays Figure 8.  Test circuit for measuring switching times Table 8. Test data Supply voltage Input Load V t, t C R I r f L L 1.2 V V ≤ 2 ns 30 pF 1 kΩ CC 1.65 V to 1.95 V V ≤ 2 ns 30 pF 1 kΩ CC 2.3 V to 2.7 V V ≤ 2 ns 30 pF 500 Ω CC 2.7 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω 3.0 V to 3.6 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 7 / 15

Nexperia 74LVC11 Triple 3-input AND gate 11 Package outline SO14:plasticsmalloutlinepackage;14leads;bodywidth3.9mm SOT108-1 D E A X c y HE v M A Z 14 8 Q A2 A1 (A3) A pin1index θ Lp 1 7 L e w M detailX bp 0 2.5 5mm scale DIMENSIONS(inchdimensionsarederivedfromtheoriginalmmdimensions) UNIT mAax. A1 A2 A3 bp c D(1) E(1) e HE L Lp Q v w y Z(1) θ 0.25 1.45 0.49 0.25 8.75 4.0 6.2 1.0 0.7 0.7 mm 1.75 0.25 1.27 1.05 0.25 0.25 0.1 0.10 1.25 0.36 0.19 8.55 3.8 5.8 0.4 0.6 0.3 8o 0.010 0.057 0.019 0.0100 0.35 0.16 0.244 0.039 0.028 0.028 0o inches 0.069 0.01 0.05 0.041 0.01 0.01 0.004 0.004 0.049 0.014 0.0075 0.34 0.15 0.228 0.016 0.024 0.012 Note 1.Plasticormetalprotrusionsof0.15mm(0.006inch)maximumpersidearenotincluded. OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT108-1 076E06 MS-012 03-02-19 Figure 9.  Package outline SOT108-1 (SO14) 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 8 / 15

Nexperia 74LVC11 Triple 3-input AND gate SSOP14:plasticshrinksmalloutlinepackage;14leads;bodywidth5.3mm SOT337-1 D E A X c y HE v M A Z 14 8 Q A2 A1 (A3) A pin1index θ Lp L 1 7 detailX w M e bp 0 2.5 5mm scale DIMENSIONS(mmaretheoriginaldimensions) UNIT mAax. A1 A2 A3 bp c D(1) E(1) e HE L Lp Q v w y Z(1) θ 0.21 1.80 0.38 0.20 6.4 5.4 7.9 1.03 0.9 1.4 8o mm 2 0.05 1.65 0.25 0.25 0.09 6.0 5.2 0.65 7.6 1.25 0.63 0.7 0.2 0.13 0.1 0.9 0o Note 1.Plasticormetalprotrusionsof0.25mmmaximumpersidearenotincluded. OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT337-1 MO-150 03-02-19 Figure 10.  Package outline SOT337-1 (SSOP14) 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 9 / 15

Nexperia 74LVC11 Triple 3-input AND gate TSSOP14:plasticthinshrinksmalloutlinepackage;14leads;bodywidth4.4mm SOT402-1 D E A X c y HE v M A Z 14 8 Q A2 (A3) A pin1index A1 θ Lp L 1 7 detailX w M e bp 0 2.5 5mm scale DIMENSIONS(mmaretheoriginaldimensions) UNIT mAax. A1 A2 A3 bp c D(1) E(2) e HE L Lp Q v w y Z(1) θ 0.15 0.95 0.30 0.2 5.1 4.5 6.6 0.75 0.4 0.72 8o mm 1.1 0.05 0.80 0.25 0.19 0.1 4.9 4.3 0.65 6.2 1 0.50 0.3 0.2 0.13 0.1 0.38 0o Notes 1.Plasticormetalprotrusionsof0.15mmmaximumpersidearenotincluded. 2.Plasticinterleadprotrusionsof0.25mmmaximumpersidearenotincluded. OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT402-1 MO-153 03-02-18 Figure 11.  Package outline SOT402-1 (TSSOP14) 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 10 / 15

Nexperia 74LVC11 Triple 3-input AND gate DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm SOT762-1 D B A A A1 E c terminal 1 detail X index area terminal 1 C e1 index area e b v C A B y1C y w C 2 6 L 1 7 Eh e 14 8 k 13 9 Dh X k 0 2 4 mm scale Dimensions (mm are the original dimensions) Unit A(1) A1 b c D(1) Dh E(1) Eh e e1 k L v w y y1 max 1 0.05 0.30 3.1 1.65 2.6 1.15 0.5 mm nom 0.02 0.25 0.2 3.0 1.50 2.5 1.00 0.5 2 0.4 0.1 0.05 0.05 0.1 min 0.00 0.18 2.9 1.35 2.4 0.85 0.2 0.3 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. sot762-1_po Outline References European Issue date version IEC JEDEC JEITA projection 15-04-10 SOT762-1 MO-241 15-05-05 Figure 12.  Package outline SOT762-1 (DHVQFN14) 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 11 / 15

Nexperia 74LVC11 Triple 3-input AND gate 12 Abbreviations Table 9. Abbreviations Acronym Description CDM Charged Device Model DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 13 Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes 74LVC11 v.7 20171110 Product data sheet - 74LVC11 v.6 Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. • Legal texts have been adapted to the new company name where appropriate. 74LVC11 v.6 20111117 Product data sheet - 74LVC11 v.5 Modifications: • Legal pages updated. • Table 6, bodyrow ΔICC: condition VCC changed. 74LVC11 v.5 20111025 Product data sheet - 74LVC11 v.4 74LVC11 v.4 20040113 Product specification - 74LVC11 v.3 74LVC11 v.3 19980428 Product specification - 74LVC11 v.2 74LVC11 v.2 19980428 Product specification - 74LVC11 v.1 74LVC11 v.1 - - - - 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 12 / 15

Nexperia 74LVC11 Triple 3-input AND gate 14 Legal information 14.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. systems or equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal 14.2 Definitions injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in Draft — The document is a draft version only. The content is still under such equipment or applications and therefore such inclusion and/or use is at internal review and subject to formal approval, which may result in the customer’s own risk. modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein Applications — Applications that are described herein for any of these and shall have no liability for the consequences of use of such information. products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use Short data sheet — A short data sheet is an extract from a full data sheet without further testing or modification. Customers are responsible for the with the same product type number(s) and title. A short data sheet is design and operation of their applications and products using Nexperia intended for quick reference only and should not be relied upon to contain products, and Nexperia accepts no liability for any assistance with detailed and full information. For detailed and full information see the applications or customer product design. It is customer’s sole responsibility relevant full data sheet, which is available on request via the local Nexperia to determine whether the Nexperia product is suitable and fit for the sales office. In case of any inconsistency or conflict with the short data sheet, customer’s applications and products planned, as well as for the planned the full data sheet shall prevail. application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks Product specification — The information and data provided in a Product associated with their applications and products. Nexperia does not accept data sheet shall define the specification of the product as agreed between any liability related to any default, damage, costs or problem which is based Nexperia and its customer, unless Nexperia and customer have explicitly on any weakness or default in the customer’s applications or products, or agreed otherwise in writing. In no event however, shall an agreement be the application or use by customer’s third party customer(s). Customer is valid in which the Nexperia product is deemed to offer functions and qualities responsible for doing all necessary testing for the customer’s applications beyond those described in the Product data sheet. and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. 14.3 Disclaimers Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent Limited warranty and liability — Information in this document is believed damage to the device. Limiting values are stress ratings only and (proper) to be accurate and reliable. However, Nexperia does not give any operation of the device at these or any other conditions above those representations or warranties, expressed or implied, as to the accuracy given in the Recommended operating conditions section (if present) or the or completeness of such information and shall have no liability for the Characteristics sections of this document is not warranted. Constant or consequences of use of such information. Nexperia takes no responsibility repeated exposure to limiting values will permanently and irreversibly affect for the content in this document if provided by an information source outside the quality and reliability of the device. of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal Terms and conditions of commercial sale — Nexperia products are or replacement of any products or rework charges) whether or not such sold subject to the general terms and conditions of commercial sale, as damages are based on tort (including negligence), warranty, breach of published at http://www.nexperia.com/profile/terms, unless otherwise agreed contract or any other legal theory. Notwithstanding any damages that in a valid written individual agreement. In case an individual agreement is customer might incur for any reason whatsoever, Nexperia's aggregate and concluded only the terms and conditions of the respective agreement shall cumulative liability towards customer for the products described herein shall apply. Nexperia hereby expressly objects to applying the customer’s general be limited in accordance with the Terms and conditions of commercial sale of terms and conditions with regard to the purchase of Nexperia products by Nexperia. customer. Right to make changes — Nexperia reserves the right to make changes No offer to sell or license — Nothing in this document may be interpreted to information published in this document, including without limitation or construed as an offer to sell products that is open for acceptance or specifications and product descriptions, at any time and without notice. This the grant, conveyance or implication of any license under any copyrights, document supersedes and replaces all information supplied prior to the patents or other industrial or intellectual property rights. publication hereof. Export control — This document as well as the item(s) described herein Suitability for use — Nexperia products are not designed, authorized or may be subject to export control regulations. Export might require a prior warranted to be suitable for use in life support, life-critical or safety-critical authorization from competent authorities. 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 13 / 15

Nexperia 74LVC11 Triple 3-input AND gate Non-automotive qualified products — Unless this data sheet expressly design and use of the product for automotive applications beyond Nexperia's states that this specific Nexperia product is automotive qualified, the standard warranty and Nexperia's product specifications. product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia Translations — A non-English (translated) version of a document is for accepts no liability for inclusion and/or use of non-automotive qualified reference only. The English version shall prevail in case of any discrepancy products in automotive equipment or applications. In the event that customer between the translated and English versions. uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia's warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for 14.4 Trademarks automotive applications beyond Nexperia's specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia Notice: All referenced brands, product names, service names and for any liability, damages or failed product claims resulting from customer trademarks are the property of their respective owners. 74LVC11 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 7 — 10 November 2017 14 / 15

Nexperia 74LVC11 Triple 3-input AND gate Contents 1 General description ............................................1 2 Features and benefits .........................................1 3 Ordering information ..........................................2 4 Functional diagram .............................................2 5 Pinning information ............................................3 5.1 Pinning ...............................................................3 5.2 Pin description ...................................................3 6 Functional description ........................................4 7 Limiting values ....................................................4 8 Recommended operating conditions ................5 9 Static characteristics ..........................................5 10 Dynamic characteristics .....................................6 10.1 Waveforms and test circuit ................................7 11 Package outline ...................................................8 12 Abbreviations ....................................................12 13 Revision history ................................................12 14 Legal information ..............................................13 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section 'Legal information'. © Nexperia B.V. 2017. All rights reserved. For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 10 November 2017 Document identifier: 74LVC11