74HC153; 74HCT153 Dual 4-input multiplexer Rev. 7 — 10 October 2018 Product data sheet 1. General description The 74HC153; 74HCT153 is a dual 4-input multiplexer. The device features independent enable inputs (nE) and common data select inputs (S0 and S1). For each multiplexer, the select inputs select one of the four binary inputs and routes it to the multiplexer output (nY). A HIGH on E forces the corresponding multiplexer outputs LOW. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of V . CC 2. Features and benefits • Input levels: • For 74HC153: CMOS level • For 74HCT153: TTL level • Non-inverting outputs • Separate enable input for each output • Common select inputs • Complies with JEDEC standard no. 7A • Permits multiplexing from n lines to 1 line • Enable line provided for cascading (n lines to 1 line) • ESD protection: • HBM JESD22-A114F exceeds 2000 V • MM JESD22-A115-A exceeds 200 V • Multiple package options • Specified from -40 °C to +85 °C and -40 °C to +125 °C. 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74HC153D -40 °C to +125 °C SO16 plastic small outline package; 16 leads; SOT109-1 body width 3.9 mm 74HCT153D 74HC153PW -40 °C to +125 °C TSSOP16 plastic thin shrink small outline package; SOT403-1 16 leads; body width 4.4 mm 74HCT153PW

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer 4. Functional diagram 1 2E 1I0 6 1I1 5 1Y 1I2 MUX 7 4 1I3 3 S0 14 6 5 4 3 10 11 12 13 S1 2 1I0 1I1 1I2 1I3 2I0 2I1 2I2 2I3 2I0 14 S0 10 2I1 2 S1 11 2Y 2I2 MUX 9 1 1E 12 2I3 15 2E 13 1Y 2Y 2E 7 9 001aal843 15 001aal844 Fig. 1. Logic symbol Fig. 2. Functional diagram 1E 1I3 1I2 1I1 1I0 S0 S1 2I3 2I2 2I1 2I0 2E 1Y 2Y 001aal845 Fig. 3. Logic diagram 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 2 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer 5. Pinning information 5.1. Pinning 74HC153 74HCT153 1E 1 16 VCC 74HC153 74HCT153 S1 2 15 2E 1I3 3 14 S0 1E 1 16 VCC S1 2 15 2E 1I2 4 13 2I3 1l3 3 14 S0 1I1 5 12 2I2 1l2 4 13 2l3 1l1 5 12 2l2 1I0 6 11 2I1 1l0 6 11 2l1 1Y 7 10 2I0 1Y 7 10 2l0 GND 8 9 2Y GND 8 9 2Y aaa-008463 aaa-008464 Fig. 4. Pin configuration SOT109-1 (SO16) Fig. 5. Pin configuration SOT403-1 (TSSOP16) 5.2. Pin description Table 2. Pin description Symbol Pin Description 1E, 2E 1, 15 output enable inputs (active LOW) S0, S1 14, 2 data select inputs 1I0, 1I1, 1I2, 1I3 6, 5, 4, 3 data inputs source 1 1Y 7 multiplexer output source 1 GND 8 ground (0 V) 2Y 9 multiplexer output source 2 2I0, 2I1, 2I2, 2I3 10, 11, 12, 13 data inputs source 2 V 16 supply voltage CC 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 3 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer 6. Functional description Table 3. Function table H = HIGH voltage level; L = LOW voltage level; X = don’t care. select Inputs data inputs output enable output S0 S1 nI0 nI1 nI2 nI3 nE nY X X X X X X H L L L L X X X L L L L H X X X L H H L X L X X L L H L X H X X L H L H X X L X L L L H X X H X L H H H X X X L L L H H X X X H L H 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit V supply voltage -0.5 +7 V CC I input clamping current V < -0.5 V or V > V + 0.5 V [1] - ±20 mA IK I I CC I output clamping current V < -0.5 V or V > V + 0.5 V [1] - ±20 mA OK O O CC I output current -0.5 V < V < V + 0.5 V - ±25 mA O O CC I supply current - 50 mA CC I ground current -50 - mA GND T storage temperature -65 +150 °C stg P total power dissipation SO16 and (T)SSOP16 packages [2] - 500 mW tot [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For SO16 package: Ptot derates linearly with 8 mW/K above 70 °C. For TSSOP16 packages: Ptot derates linearly with 5.5 mW/K above 60 °C. 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 4 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer 8. Recommended operating conditions Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V) Symbol Parameter Conditions 74HC153 74HCT153 Unit Min Typ Max Min Typ Max V supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V CC V input voltage 0 - V 0 - V V I CC CC V output voltage 0 - V 0 - V V O CC CC T ambient temperature -40 +25 +125 -40 +25 +125 °C amb Δt/ΔV input transition rise and fall rate V = 2.0 V - - 625 - - - ns/V CC V = 4.5 V - 1.67 139 - 1.67 139 ns/V CC V = 6.0 V - - 83 - - - ns/V CC 9. Static characteristics Table 6. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ Max Min Max Min Max 74HC153 V HIGH-level V = 2.0 V 1.5 1.2 - 1.5 - 1.5 - V IH CC input voltage V = 4.5 V 3.15 2.4 - 3.15 - 3.15 - V CC V = 6.0 V 4.2 3.2 - 4.2 - 4.2 - V CC V LOW-level V = 2.0 V - 0.8 0.5 - 0.5 - 0.5 V IL CC input voltage V = 4.5 V - 2.1 1.35 - 1.35 - 1.35 V CC V = 6.0 V - 2.8 1.8 - 1.8 - 1.8 V CC V HIGH-level V = V or V OH I IH IL output voltage I = -20 μA; V = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V O CC I = -20 μA; V = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V O CC I = -20 μA; V = 6.0 V 5.9 6.0 - 5.9 - 5.9 - V O CC I = -4.0 mA; V = 4.5 V 3.98 4.32 - 3.84 - 3.7 - V O CC I = -5.2 mA; V = 6.0 V 5.48 5.81 - 5.34 - 5.2 - V O CC V LOW-level V = V or V OL I IH IL output voltage I = 20 μA; V = 2.0 V - 0 0.1 - 0.1 - 0.1 V O CC I = 20 μA; V = 4.5 V - 0 0.1 - 0.1 - 0.1 V O CC I = 20 μA; V = 6.0 V - 0 0.1 - 0.1 - 0.1 V O CC I = 4.0 mA; V = 4.5 V - 0.15 0.26 - 0.33 - 0.4 V O CC I = 5.2 mA; V = 6.0 V - 0.16 0.26 - 0.33 - 0.4 V O CC I input leakage V = V or GND; V = 6.0 V - - ±0.1 - ±1 - ±1 μA I I CC CC current I supply current V = V or GND; I = 0 A; - - 8.0 - 80 - 160 μA CC I CC O V = 6.0 V CC C input - 3.5 - - - - - pF I capacitance 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 5 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ Max Min Max Min Max 74HCT153 V HIGH-level V = 4.5 V to 5.5 V 2.0 1.6 - 2.0 - 2.0 - V IH CC input voltage V LOW-level V = 4.5 V to 5.5 V - 1.2 0.8 - 0.8 - 0.8 V IL CC input voltage V HIGH-level V = V or V ; V = 4.5 V OH I IH IL CC output voltage I = -20 μA 4.4 4.5 - 4.4 - 4.4 - V O I = -4.0 mA 3.98 4.32 - 3.84 - 3.7 - V O V LOW-level V = V or V ; V = 4.5 V OL I IH IL CC output voltage I = 20 μA; V = 4.5 V - 0 0.1 - 0.1 - 0.1 V O CC I = 5.2 mA; V = 6.0 V - 0.15 0.26 - 0.33 - 0.4 V O CC I input leakage V = V or GND; V = 5.5 V - - ±0.1 - ±1 - ±1 μA I I CC CC current I supply current V = V or GND; I = 0 A; - - 8 - 80 - 160 μA CC I CC O V = 5.5 V CC ΔI additional per input pin; V = V - 2.1 V; CC I CC supply current I = 0 A; other inputs at V or O CC GND; V = 4.5 V to 5.5 V CC 1In, 2In - 45 162 - 203 - 221 μA nE - 60 216 - 270 - 294 μA Sn - 135 486 - 608 - 662 μA C input - 3.5 - - - - - pF I capacitance 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 6 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer 10. Dynamic characteristics Table 7. Dynamic characteristics GND = 0 V; t = t = 6 ns; C = 50 pF; for test circuit, see Fig. 8; unless otherwise specified r f L Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ Max Min Max Min Max 74HC153 t propagation 1In to nY, 2In to nY; [1] pd delay see Fig. 6 V = 2.0 V - 47 145 - 180 - 220 ns CC V = 4.5 V - 17 29 - 36 - 44 ns CC V = 5.0 V; C = 15 pF - 14 - - - - - ns CC L V = 6.0 V - 14 25 - 31 - 38 ns CC Sn to nY; see Fig. 7 V = 2.0 V - 50 150 - 190 - 225 ns CC V = 4.5 V - 18 30 - 38 - 45 ns CC V = 5.0 V; C = 15 pF - 15 - - - - - ns CC L V = 6.0 V - 14 26 - 33 - 38 ns CC nE to nY; see Fig. 7 V = 2.0 V - 33 100 - 125 - 150 ns CC V = 4.5 V - 12 20 - 25 - 30 ns CC V = 5.0 V; C = 15 pF - 10 - - - - - ns CC L V = 6.0 V - 10 17 - 21 - 26 ns CC t transition time see Fig. 6 [2] t V = 2.0 V - 19 75 - 95 - 110 ns CC V = 4.5 V - 7 15 - 19 - 22 ns CC V = 6.0 V - 6 13 - 16 - 19 ns CC C power per package; [3] - 30 - - - - - pF PD dissipation V = GND to V I CC capacitance 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 7 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ Max Min Max Min Max 74HCT153 t HIGH to LOW 1In to nY, 2In to nY; [1] PHL propagation see Fig. 6 delay V = 4.5 V - 19 34 - 43 - 51 ns CC V = 5.0 V; C = 15 pF - 16 - - - - - ns CC L t LOW to HIGH 1In to nY, 2In to nY; [1] PLH propagation see Fig. 6 delay V = 4.5 V - 13 24 - 30 - 36 ns CC V = 5.0 V; C = 15 pF - 16 - - - - - ns CC L t propagation Sn to nY; see Fig. 7 [1] pd delay V = 4.5 V - 20 34 - 43 - 51 ns CC V = 5.0 V; C = 15 pF - 17 - - - - - ns CC L nE to nY; see Fig. 7 [1] V = 4.5 V - 14 27 - 34 - 41 ns CC V = 5.0 V; C = 15 pF - 11 - - - - - ns CC L t transition time see Fig. 6 [2] t V = 4.5 V - 7 15 - 19 - 22 ns CC C power per package; [3] - 30 - - - - - pF PD dissipation V = GND to V - 1.5 V I CC capacitance [1] tpd is the same as tPHL and tPLH. [2] tt is the same as tTHL and tTLH. [3] CPD is used to determine the dynamic power dissipation (PD in μW): PD = CPD x VCC2 x fi x N + ∑(CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; ∑(CL x VCC2 x fo) = sum of outputs. VI 1In, 2ln input VM VM GND tPHL tPLH VOH VY nY output VM VM VX VOL tTHL tTLH aaa-008465 Measurement points are given in Table 8. V and V are typical voltage output levels that occur with the output load. OL OH Fig. 6. Waveforms showing the input (1In, 2In) to output (1Y, 2Y) propagation delays and output transition times 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 8 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer Table 8. Measurement points Type Input Output V V V V M M X Y 74HC153 0.5V 0.5V 0.1V 0.9V CC CC CC CC 74HCT153 1.3 V 1.3 V 0.1V 0.9V CC CC VI Sn, nE input VM VM GND tPHL tPLH VOH VY nY output VM VM VX VOL tTHL tTLH aaa-008466 Measurement points are given in Table 8. V and V are typical voltage output levels that occur with the output load. OL OH Fig. 7. Waveforms showing the input (Sn, nE) to output (nY) propagation delays VI tW 90 % negative pulse VM VM 10 % GND tf tr tr tf VI 90 % positive pulse VM VM 10 % GND tW VCC VI VO G DUT RT CL 001aah768 Test data is given in Table 9. Definitions test circuit: R = termination resistance should be equal to output impedance Z of the pulse generator. T o C = load capacitance including jig and probe capacitance. L Fig. 8. Test circuit for measuring switching times Table 9. Test data Type Input Load Test V t, t C I r f L 74HC153 V 6.0 ns 15 pF, 50 pF t , t CC PLH PHL 74HCT153 3.0 V 6.0 ns 15 pF, 50 pF t , t PLH PHL 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 9 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer 11. Package outline SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 D E A X c y H E v M A Z 16 9 Q A 2 A 1 (A 3 ) A pin 1 index θ L p 1 8 L e w M detail X b p 0 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT mAax . A 1 A 2 A 3 b p c D (1) E (1) e H E L L p Q v w y Z (1) θ 0.25 1.45 0.49 0.25 10.0 4.0 6.2 1.0 0.7 0.7 mm 1.75 0.25 1.27 1.05 0.2 5 0.25 0.1 0.10 1.25 0.36 0.19 9.8 3.8 5.8 0.4 0.6 0.3 8 o 0.010 0.057 0.019 0.0100 0.39 0.16 0.244 0.039 0.028 0.028 0 o inches 0.069 0.01 0.05 0.041 0.01 0.01 0.004 0.004 0.049 0.014 0.0075 0.38 0.15 0.228 0.016 0.020 0.012 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT109-1 076E07 MS-012 03-02-19 Fig. 9. Package outline SOT109-1 (SO16) 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 10 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 D E A X c y H E v M A Z 16 9 Q A 2 (A 3 ) A pin 1 index A 1 θ L p L 1 8 detail X w M e b p 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT mAax . A 1 A 2 A 3 b p c D (1) E (2) e H E L L p Q v w y Z (1) θ 0.15 0.95 0.30 0.2 5.1 4.5 6.6 0.75 0.4 0.40 8 o mm 1.1 0.05 0.80 0.25 0.19 0.1 4.9 4.3 0.65 6.2 1 0.50 0.3 0.2 0.13 0.1 0.06 0 o Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT403-1 MO-153 03-02-18 Fig. 10. Package outline SOT403-1 (TSSOP16) 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 11 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer 12. Abbreviations Table 10. Abbreviations Acronym Description CMOS Complementary Metal-Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 13. Revision history Table 11. Revision history Document ID Release date Data sheet status Change notice Supersedes 74HC_HCT153 v.7 20181010 Product data sheet - 74HC_HCT153 v.6 Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. • Legal texts have been adapted to the new company name where appropriate. • Type numbers 74HC153DB and 74HCT153DB (SOT338-1/SSOP16) removed. 74HC_HCT153 v.6 20160511 Product data sheet - 74HC_HCT153 v.5 Modifications: • Type numbers 74HC153N and 74HCT153N (SOT38-4) removed. 74HC_HCT153 v.5 20140123 Product data sheet - 74HC_HCT153 v.4 Modifications: • Table 1 and Section 11: all references to 14 pin packages removed. 74HC_HCT153 v.4 20131128 Product data sheet - 74HC_HCT153 v.3 74HC_HCT153 v.3 20130722 Product data sheet - 74HC_HCT153_CNV v.2 74HC_HCT153_CNV v.2 19970827 Product specification - - 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 12 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer injury, death or severe property or environmental damage. Nexperia and its 14. Legal information suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Quick reference data — The Quick reference data is an extract of the Data sheet status product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Document status Product Definition Applications — Applications that are described herein for any of these [1][2] status [3] products are for illustrative purposes only. Nexperia makes no representation Objective [short] Development This document contains data from or warranty that such applications will be suitable for the specified use data sheet the objective specification for without further testing or modification. product development. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for Preliminary [short] Qualification This document contains data from any assistance with applications or customer product design. It is customer’s data sheet the preliminary specification. sole responsibility to determine whether the Nexperia product is suitable Product [short] Production This document contains the product and fit for the customer’s applications and products planned, as well as data sheet specification. for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. [1] Please consult the most recently issued document before initiating or completing a design. Nexperia does not accept any liability related to any default, damage, costs [2] The term 'short data sheet' is explained in section "Definitions". or problem which is based on any weakness or default in the customer’s [3] The product status of device(s) described in this document may have applications or products, or the application or use by customer’s third party changed since this document was published and may differ in case of customer(s). Customer is responsible for doing all necessary testing for the multiple devices. The latest product status information is available on customer’s applications and products using Nexperia products in order to the internet at https://www.nexperia.com. avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Definitions Limiting values — Stress above one or more limiting values (as defined in Draft — The document is a draft version only. The content is still under the Absolute Maximum Ratings System of IEC 60134) will cause permanent internal review and subject to formal approval, which may result in damage to the device. Limiting values are stress ratings only and (proper) modifications or additions. Nexperia does not give any representations or operation of the device at these or any other conditions above those warranties as to the accuracy or completeness of information included herein given in the Recommended operating conditions section (if present) or the and shall have no liability for the consequences of use of such information. Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect Short data sheet — A short data sheet is an extract from a full data sheet the quality and reliability of the device. with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain Terms and conditions of commercial sale — Nexperia products are detailed and full information. For detailed and full information see the relevant sold subject to the general terms and conditions of commercial sale, as full data sheet, which is available on request via the local Nexperia sales published at http://www.nexperia.com/profile/terms, unless otherwise agreed office. In case of any inconsistency or conflict with the short data sheet, the in a valid written individual agreement. In case an individual agreement is full data sheet shall prevail. concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general Product specification — The information and data provided in a Product terms and conditions with regard to the purchase of Nexperia products by data sheet shall define the specification of the product as agreed between customer. Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be No offer to sell or license — Nothing in this document may be interpreted valid in which the Nexperia product is deemed to offer functions and qualities or construed as an offer to sell products that is open for acceptance or the beyond those described in the Product data sheet. grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein Disclaimers may be subject to export control regulations. Export might require a prior Limited warranty and liability — Information in this document is believed authorization from competent authorities. to be accurate and reliable. However, Nexperia does not give any Non-automotive qualified products — Unless this data sheet expressly representations or warranties, expressed or implied, as to the accuracy states that this specific Nexperia product is automotive qualified, the or completeness of such information and shall have no liability for the product is not suitable for automotive use. It is neither qualified nor tested in consequences of use of such information. Nexperia takes no responsibility accordance with automotive testing or application requirements. Nexperia for the content in this document if provided by an information source outside accepts no liability for inclusion and/or use of non-automotive qualified of Nexperia. products in automotive equipment or applications. In no event shall Nexperia be liable for any indirect, incidental, punitive, In the event that customer uses the product for design-in and use in special or consequential damages (including - without limitation - lost automotive applications to automotive specifications and standards, profits, lost savings, business interruption, costs related to the removal customer (a) shall use the product without Nexperia’s warranty of the or replacement of any products or rework charges) whether or not such product for such automotive applications, use and specifications, and (b) damages are based on tort (including negligence), warranty, breach of whenever customer uses the product for automotive applications beyond contract or any other legal theory. Nexperia’s specifications such use shall be solely at customer’s own risk, Notwithstanding any damages that customer might incur for any reason and (c) customer fully indemnifies Nexperia for any liability, damages or failed whatsoever, Nexperia’s aggregate and cumulative liability towards customer product claims resulting from customer design and use of the product for for the products described herein shall be limited in accordance with the automotive applications beyond Nexperia’s standard warranty and Nexperia’s Terms and conditions of commercial sale of Nexperia. product specifications. Right to make changes — Nexperia reserves the right to make changes Translations — A non-English (translated) version of a document is for to information published in this document, including without limitation reference only. The English version shall prevail in case of any discrepancy specifications and product descriptions, at any time and without notice. This between the translated and English versions. document supersedes and replaces all information supplied prior to the publication hereof. Trademarks Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical Notice: All referenced brands, product names, service names and systems or equipment, nor in applications where failure or malfunction trademarks are the property of their respective owners. of an Nexperia product can reasonably be expected to result in personal 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 13 / 14

Nexperia 74HC153; 74HCT153 Dual 4-input multiplexer Contents 1. General description......................................................1 2. Features and benefits..................................................1 3. Ordering information....................................................1 4. Functional diagram.......................................................2 5. Pinning information......................................................3 5.1. Pinning.........................................................................3 5.2. Pin description.............................................................3 6. Functional description.................................................4 7. Limiting values.............................................................4 8. Recommended operating conditions..........................5 9. Static characteristics....................................................5 10. Dynamic characteristics............................................7 11. Package outline........................................................10 12. Abbreviations............................................................12 13. Revision history........................................................12 14. Legal information......................................................13 © Nexperia B.V. 2018. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 10 October 2018 74HC_HCT153 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved Product data sheet Rev. 7 — 10 October 2018 14 / 14