74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer Rev. 12 — 10 October 2017 Product data sheet 1 General description The 74HC4052; 74HCT4052 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 and S1) are common to both switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of V . CC 2 Features and benefits • Wide analog input voltage range from -5 V to +5 V • Low ON resistance: –80 Ω (typical) at V - V = 4.5 V CC EE –70 Ω (typical) at V - V = 6.0 V CC EE –60 Ω (typical) at V - V = 9.0 V CC EE • Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals • Typical ‘break before make’ built-in • Complies with JEDEC standard no. 7A • Input levels: –For 74HC4052: CMOS level –For 74HCT4052: TTL level • ESD protection: –HBM JESD22-A114F exceeds 2000 V –MM JESD22-A115-A exceeds 200 V –CDM JESD22-C101E exceeds 1000 V • Specified from -40 °C to +85 °C and -40 °C to +125 °C 3 Applications • Analog multiplexing and demultiplexing • Digital multiplexing and demultiplexing • Signal gating

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 4 Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74HC4052D -40 °C to +125 °C SO16 plastic small outline package; 16 leads; body SOT109-1 width 3.9 mm 74HCT4052D 74HC4052DB -40 °C to +125 °C SSOP16 plastic shrink small outline package; 16 leads; SOT338-1 body width 5.3 mm 74HCT4052DB 74HC4052PW -40 °C to +125 °C TSSOP16 plastic thin shrink small outline package; 16 leads; SOT403-1 body width 4.4 mm 74HCT4052PW 74HC4052BQ -40 °C to +125 °C DHVQFN16 plastic dual-in line compatible thermal enhanced SOT763-1 very thin quad flat package; no leads; 16 terminals; 74HCT4052BQ body 2.5 x 3.5 x 0.85 mm 5 Functional diagram 10 0 0 4× 3 13 9 1 6 G4 1Z 1Y0 12 MDX 10 S0 1Y1 14 0 1 9 S1 1Y2 15 1 5 3 1Y3 11 2 2 2Y0 1 3 4 2Y1 5 12 2Y2 2 14 13 6 E 2Y3 4 15 2Z 11 001aah824 3 001aah825 Figure 1.  Logic symbol Figure 2.  IEC logic symbol 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 2 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer nYn VCC VEE VCC VCC VCC VEE from VEE nZ logic mnb043 Figure 3.  Schematic diagram (one switch) VDD 16 13 1Z 12 1Y0 14 1Y1 15 1Y2 10 S0 11 1Y3 9 LOGIC 1-OF-4 S1 LEVEL DECODER CONVERSION 1 2Y0 6 E 5 2Y1 2 2Y2 4 2Y3 3 2Z 8 7 VSS VEE 001aah872 Figure 4.  Functional diagram 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 3 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 6 Pinning information 6.1 Pinning 74HC4052 74HCT4052 0 C terminal1 Y C 2 V indexarea 1 16 2Y2 2 15 1Y2 74HC4052 74HCT4052 2Z 3 14 1Y1 2Y3 4 13 1Z 2Y0 1 16 VCC 2Y1 5 12 1Y0 2Y2 2 15 1Y2 E 6 VCC(1) 11 1Y3 2Z 3 14 1Y1 VEE 7 10 S0 8 9 2Y3 4 13 1Z D 1 GN S 001aah823 2Y1 5 12 1Y0 Transparenttopview E 6 11 1Y3 (1) This is not a supply pin. The substrate is attached VEE 7 10 S0 to this pad using conductive die attach material. There is no electrical or mechanical requirement to solder this GND 8 9 S1 pad.However, if it is soldered, the solder land should remain 001aah822 floating or be connected to VCC. Figure 5.  Pin configuration for SO16 and (T)SSOP16 Figure 6.  Pin configuration for DHVQFN16 6.2 Pin description Table 2. Pin description Symbol Pin Description 2Y0, 2Y1, 2Y2, 2Y3 1, 5, 2, 4 independent input or output 1Z, 2Z 13, 3 common input or output E 6 enable input (active LOW) V 7 negative supply voltage EE GND 8 ground (0 V) S0, S1 10, 9 select logic input 1Y0, 1Y1, 1Y2, 1Y3 12, 14, 15, 11 independent input or output V 16 positive supply voltage CC 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 4 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 7 Functional description [1] Table 3. Function table Input Channel on E S1 S0 L L L nY0 and nZ L L H nY1 and nZ L H L nY2 and nZ L H H nY3 and nZ H X X none [1] H = HIGH voltage level; L = LOW voltage level; X = don’t care. 8 Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to V = GND (ground = 0 V). EE Symbol Parameter Conditions Min Max Unit [1] V supply voltage -0.5 +11.0 V CC I input clamping current V < -0.5 V or V > V + 0.5 V - ±20 mA IK I I CC I switch clamping current V < -0.5 V or V > V + 0.5 V - ±20 mA SK SW SW CC I switch current -0.5 V < V < V + 0.5 V - ±25 mA SW SW CC I supply current - ±20 mA EE I supply current - 50 mA CC I ground current - -50 mA GND T storage temperature -65 +150 °C stg [2] P total power dissipation SO16, SSOP16, TSSOP16 and - 500 mW tot DHVQFN16 package P power dissipation per switch - 100 mW [1] To avoid drawing VCC current out of pins nZ, when switch current flows in pins nYn, the voltage drop across the bidirectional switch must not exceed 0.4 V. If the switch current flows into pins nZ, no VCC current will flow out of pins nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at pins nYn and nZ may not exceed VCC or VEE. [2] For SO16 packages: above 70 °C the value of Ptot derates linearly with 8 mW/K. For SSOP16 and TSSOP16 packages: above 60 °C the value of Ptot derates linearly with 5.5 mW/K. For DHVQFN16 packages: above 60 °C the value of Ptot derates linearly with 4.5 mW/K. 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 5 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 9 Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter Conditions 74HC4052 74HCT4052 Unit Min Typ Max Min Typ Max V supply voltage see Figure 7 and CC Figure 8 V - GND 2.0 5.0 10.0 4.5 5.0 5.5 V CC V - V 2.0 5.0 10.0 2.0 5.0 10.0 V CC EE V input voltage GND - V GND - V V I CC CC V switch voltage V - V V - V V SW EE CC EE CC T ambient temperature -40 +25 +125 -40 +25 +125 °C amb Δt/ΔV input transition rise and V = 2.0 V - - 625 - - - ns/V CC fall rate V = 4.5 V - 1.67 139 - 1.67 139 ns/V CC V = 6.0 V - - 83 - - - ns/V CC V = 10.0 V - - 31 - - - ns/V CC mnb044 mnb045 12 12 VCC- GND VCC- GND (V)10 (V) 8 8 operatingarea 6 operatingarea 4 4 2 0 0 0 4 8 12 0 4 8 12 VCC- VEE(V) VCC- VEE(V) Figure 7.  Guaranteed operating area as a function of Figure 8.  Guaranteed operating area as a function of the supply voltages for 74HC4052 the supply voltages for 74HCT4052 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 6 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 10 Static characteristics Table 6. R resistance per switch for 74HC4052 and 74HCT4052 ON V = V or V ; for test circuit see Figure 9. I IH IL V is the input voltage at a nYn or nZ terminal, whichever is assigned as an input. is V is the output voltage at a nYn or nZ terminal, whichever is assigned as an output. os For 74HC4052: V - GND or V - V = 2.0 V, 4.5 V, 6.0 V and 9.0 V. CC CC EE For 74HCT4052: V - GND = 4.5 V and 5.5 V, V - V = 2.0 V, 4.5 V, 6.0 V and 9.0 V. CC CC EE [1] Symbol Parameter Conditions Min Typ Max Unit T = -40 °C to +85 °C amb R ON resistance (peak) V = V to V ON(peak) is CC EE [2] V = 2.0 V; V = 0 V; I = 100 μA - - - Ω CC EE SW V = 4.5 V; V = 0 V; I = 1000 μA - 100 225 Ω CC EE SW V = 6.0 V; V = 0 V; I = 1000 μA - 90 200 Ω CC EE SW V = 4.5 V; V = -4.5 V; I = 1000 μA - 70 165 Ω CC EE SW R ON resistance (rail) V = V ON(rail) is EE [2] V = 2.0 V; V = 0 V; I = 100 μA - 150 - Ω CC EE SW V = 4.5 V; V = 0 V; I = 1000 μA - 80 175 Ω CC EE SW V = 6.0 V; V = 0 V; I = 1000 μA - 70 150 Ω CC EE SW V = 4.5 V; V = -4.5 V; I = 1000 μA - 60 130 Ω CC EE SW V = V is CC [2] V = 2.0 V; V = 0 V; I = 100 μA - 150 - Ω CC EE SW V = 4.5 V; V = 0 V; I = 1000 μA - 90 200 Ω CC EE SW V = 6.0 V; V = 0 V; I = 1000 μA - 80 175 Ω CC EE SW V = 4.5 V; V = -4.5 V; I = 1000 μA - 65 150 Ω CC EE SW ΔR ON resistance mismatch V = V to V ON is CC EE between channels [2] V = 2.0 V; V = 0 V - - - Ω CC EE V = 4.5 V; V = 0 V - 9 - Ω CC EE V = 6.0 V; V = 0 V - 8 - Ω CC EE V = 4.5 V; V = -4.5 V - 6 - Ω CC EE 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 7 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer [1] Symbol Parameter Conditions Min Typ Max Unit T = -40 °C to +125 °C amb R ON resistance (peak) V = V to V ON(peak) is CC EE [2] V = 2.0 V; V = 0 V; I = 100 μA - - - Ω CC EE SW V = 4.5 V; V = 0 V; I = 1000 μA - - 270 Ω CC EE SW V = 6.0 V; V = 0 V; I = 1000 μA - - 240 Ω CC EE SW V = 4.5 V; V = -4.5 V; I = 1000 μA - - 195 Ω CC EE SW R ON resistance (rail) V = V ON(rail) is EE [2] V = 2.0 V; V = 0 V; I = 100 μA - - - Ω CC EE SW V = 4.5 V; V = 0 V; I = 1000 μA - - 210 Ω CC EE SW V = 6.0 V; V = 0 V; I = 1000 μA - - 180 Ω CC EE SW V = 4.5 V; V = -4.5 V; I = 1000 μA - - 160 Ω CC EE SW V = V is CC [2] V = 2.0 V; V = 0 V; I = 100 μA - - - Ω CC EE SW V = 4.5 V; V = 0 V; I = 1000 μA - - 240 Ω CC EE SW V = 6.0 V; V = 0 V; I = 1000 μA - - 210 Ω CC EE SW V = 4.5 V; V = -4.5 V; I = 1000 μA - - 180 Ω CC EE SW [1] All typical values are measured at Tamb = 25 °C. [2] When supply voltages (VCC - VEE) near 2.0 V the analog switch ON resistance becomes extremely non-linear. When using a supply of 2 V, it is recommended to use these devices only for transmitting digital signals. 001aai068 100 RON (1) (Ω) 80 Vsw 60 (2) V (3) VCC 40 fromselect Sn input nYn nZ 20 Vis GND VEE Isw 0 001aah826 0 1.8 3.6 5.4 7.2 9.0 Vis(V) V = 0 V to (V - V ). is CC EE V = 0 V to (V - V ). is CC EE (1) V = 4.5 V CC (2) V = 6 V CC (3) V = 9 V CC Figure 9.  Test circuit for measuring R Figure 10.  Typical R as a function of input voltage V ON ON is 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 8 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer Table 7. Static characteristics for 74HC4052 Voltages are referenced to GND (ground = 0 V). V is the input voltage at pins nYn or nZ, whichever is assigned as an input. is V is the output voltage at pins nZ or nYn, whichever is assigned as an output. os [1] Symbol Parameter Conditions Min Typ Max Unit T = -40 °C to +85 °C amb V HIGH-level input V = 2.0 V 1.5 1.2 - V IH CC voltage V = 4.5 V 3.15 2.4 - V CC V = 6.0 V 4.2 3.2 - V CC V = 9.0 V 6.3 4.7 - V CC V LOW-level input V = 2.0 V - 0.8 0.5 V IL CC voltage V = 4.5 V - 2.1 1.35 V CC V = 6.0 V - 2.8 1.8 V CC V = 9.0 V - 4.3 2.7 V CC I input leakage current V = 0 V; V = V or GND I EE I CC V = 6.0 V - - ±1.0 μA CC V = 10.0 V - - ±2.0 μA CC I OFF-state leakage V = 10.0 V; V = 0 V; V = V or V ; S(OFF) CC EE I IH IL current |V | = V - V ; see Figure 11 SW CC EE per channel - - ±1.0 μA all channels - - ±2.0 μA I ON-state leakage V = V or V ; |V | = V - V ; - - ±2.0 μA S(ON) I IH IL SW CC EE current V = 10.0 V; V = 0 V; see Figure 12 CC EE I supply current V = 0 V; V = V or GND; V = V or V ; CC EE I CC is EE CC V = V or V os CC EE V = 6.0 V - - 80.0 μA CC V = 10.0 V - - 160.0 μA CC C input capacitance - 3.5 - pF I C switch capacitance independent pins nYn - 5 - pF sw common pins nZ - 12 - pF 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 9 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer [1] Symbol Parameter Conditions Min Typ Max Unit T = -40 °C to +125 °C amb V HIGH-level input V = 2.0 V 1.5 - - V IH CC voltage V = 4.5 V 3.15 - - V CC V = 6.0 V 4.2 - - V CC V = 9.0 V 6.3 - - V CC V LOW-level input V = 2.0 V - - 0.5 V IL CC voltage V = 4.5 V - - 1.35 V CC V = 6.0 V - - 1.8 V CC V = 9.0 V - - 2.7 V CC I input leakage current V = 0 V; V = V or GND I EE I CC V = 6.0 V - - ±1.0 μA CC V = 10.0 V - - ±2.0 μA CC I OFF-state leakage V = 10.0 V; V = 0 V; V = V or V ; S(OFF) CC EE I IH IL current |V | = V - V ; see Figure 11 SW CC EE per channel - - ±1.0 μA all channels - - ±2.0 μA I ON-state leakage V = V or V ; |V | = V - V ; - - ±2.0 μA S(ON) I IH IL SW CC EE current V = 10.0 V; V = 0 V; see Figure 12 CC EE I supply current V = 0 V; V = V or GND; V = V or V ; CC EE I CC is EE CC V = V or V os CC EE V = 6.0 V - - 160.0 μA CC V = 10.0 V - - 320.0 μA CC [1] All typical values are measured at Tamb = 25 °C. 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 10 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer Table 8. Static characteristics for 74HCT4052 Voltages are referenced to GND (ground = 0 V). V is the input voltage at pins nYn or nZ, whichever is assigned as an input. is V is the output voltage at pins nZ or nYn, whichever is assigned as an output. os [1] Symbol Parameter Conditions Min Typ Max Unit T = -40 °C to +85 °C amb V HIGH-level input V = 4.5 V to 5.5 V 2.0 1.6 - V IH CC voltage V LOW-level input V = 4.5 V to 5.5 V - 1.2 0.8 V IL CC voltage I input leakage current V = V or GND; V = 5.5 V; V = 0 V - - ±1.0 μA I I CC CC EE I OFF-state leakage V = 10.0 V; V = 0 V; V = V or V ; S(OFF) CC EE I IH IL current |V | = V - V ; see Figure 11 SW CC EE per channel - - ±1.0 μA all channels - - ±2.0 μA I ON-state leakage V = 10.0 V; V = 0 V; V = V or V ; - - ±2.0 μA S(ON) CC EE I IH IL current |V | = V - V ; see Figure 12 SW CC EE I supply current V = V or GND; V = V or V ; CC I CC is EE CC V = V or V os CC EE V = 5.5 V; V = 0 V - - 80.0 μA CC EE V = 5.0 V; V = -5.0 V - - 160.0 μA CC EE ΔI additional supply per input; V = V - 2.1 V; other inputs at V - 45 202.5 μA CC I CC CC current or GND; V = 4.5 V to 5.5 V; V = 0 V CC EE C input capacitance - 3.5 - pF I C switch capacitance independent pins nYn - 5 - pF sw common pins nZ - 12 - pF 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 11 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer [1] Symbol Parameter Conditions Min Typ Max Unit T = -40 °C to +125 °C amb V HIGH-level input V = 4.5 V to 5.5 V 2.0 - - V IH CC voltage V LOW-level input V = 4.5 V to 5.5 V - - 0.8 V IL CC voltage I input leakage current V = V or GND; V = 5.5 V; V = 0 V - - ±1.0 μA I I CC CC EE I OFF-state leakage V = 10.0 V; V = 0 V; V = V or V ; S(OFF) CC EE I IH IL current |V | = V - V ; see Figure 11 SW CC EE per channel - - ±1.0 μA all channels - - ±2.0 μA I ON-state leakage V = 10.0 V; V = 0 V; V = V or V ; - - ±2.0 μA S(ON) CC EE I IH IL current |V | = V - V ; see Figure 12 SW CC EE I supply current V = V or GND; V = V or V ; CC I CC is EE CC V = V or V os CC EE V = 5.5 V; V = 0 V - - 160.0 μA CC EE V = 5.0 V; V = -5.0 V - - 320.0 μA CC EE ΔI additional supply per input; V = V - 2.1 V; other inputs at V - - 220.5 μA CC I CC CC current or GND; V = 4.5 V to 5.5 V; V = 0 V CC EE [1] All typical values are measured at Tamb = 25 °C. VCC fromselect Sn input Isw Isw Yn Z A A Vis GND VEE Vos 001aan383 V = V and V = V . is CC os EE V = V and V = V . is EE os CC Figure 11.  Test circuit for measuring OFF-state current VCC HIGH Sn fromselect input Isw Yn Z A Vos Vis GND VEE 001aan384 V = V and V = open-circuit. is CC os V = V and V = open-circuit. is EE os Figure 12.  Test circuit for measuring ON-state current 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 12 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 11 Dynamic characteristics Table 9. Dynamic characteristics for 74HC4052 GND = 0 V; t = t = 6 ns; C = 50 pF; for test circuit see Figure 15. r f L V is the input voltage at a nYn or nZ terminal, whichever is assigned as an input. is V is the output voltage at a nYn or nZ terminal, whichever is assigned as an output. os [1] Symbol Parameter Conditions Min Typ Max Unit T = -40 °C to +85 °C amb [2] t propagation delay V to V ; R = ∞ Ω; see Figure 13 pd is os L V = 2.0 V; V = 0 V - 14 75 ns CC EE V = 4.5 V; V = 0 V - 5 15 ns CC EE V = 6.0 V; V = 0 V - 4 13 ns CC EE V = 4.5 V; V = -4.5 V - 4 10 ns CC EE [3] t turn-on time E, Sn to V ; R = ∞ Ω; see Figure 14 on os L V = 2.0 V; V = 0 V - 105 405 ns CC EE V = 4.5 V; V = 0 V - 38 81 ns CC EE V = 5.0 V; V = 0 V; C = 15 pF - 28 - ns CC EE L V = 6.0 V; V = 0 V - 30 69 ns CC EE V = 4.5 V; V = -4.5 V - 26 58 ns CC EE [4] t turn-off time E, Sn to V ; R = 1 kΩ; see Figure 14 off os L V = 2.0 V; V = 0 V - 74 315 ns CC EE V = 4.5 V; V = 0 V - 27 63 ns CC EE V = 5.0 V; V = 0 V; C = 15 pF - 21 - ns CC EE L V = 6.0 V; V = 0 V - 22 54 ns CC EE V = 4.5 V; V = -4.5 V - 22 48 ns CC EE [5] C power dissipation per switch; V = GND to V - 57 - pF PD I CC capacitance 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 13 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer [1] Symbol Parameter Conditions Min Typ Max Unit T = -40 °C to +125 °C amb [2] t propagation delay V to V ; R = ∞ Ω; see Figure 13 pd is os L V = 2.0 V; V = 0 V - - 90 ns CC EE V = 4.5 V; V = 0 V - - 18 ns CC EE V = 6.0 V; V = 0 V - - 15 ns CC EE V = 4.5 V; V = -4.5 V - - 12 ns CC EE [3] t turn-on time E, Sn to V ; R = ∞ Ω; see Figure 14 on os L V = 2.0 V; V = 0 V - - 490 ns CC EE V = 4.5 V; V = 0 V - - 98 ns CC EE V = 6.0 V; V = 0 V - - 83 ns CC EE V = 4.5 V; V = -4.5 V - - 69 ns CC EE [4] t turn-off time E, Sn to V ; R = 1 kΩ; see Figure 14 off os L V = 2.0 V; V = 0 V - - 375 ns CC EE V = 4.5 V; V = 0 V - - 75 ns CC EE V = 6.0 V; V = 0 V - - 64 ns CC EE V = 4.5 V; V = -4.5 V - - 57 ns CC EE [1] All typical values are measured at Tamb = 25 °C. [2] tpd is the same as tPHL and tPLH. [3] ton is the same as tPZH and tPZL. [4] toff is the same as tPHZ and tPLZ. [5] CPD is used to determine the dynamic power dissipation (PD in μW). PD = CPD x VCC2 x fi x N + Σ{(CL + Csw) x VCC2 x fo} where: fi = input frequency in MHz; fo = output frequency in MHz; N = number of inputs switching; Σ{(CL + Csw) x VCC2 x fo} = sum of outputs; CL = output load capacitance in pF; Csw = switch capacitance in pF; VCC = supply voltage in V. 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 14 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer Table 10. Dynamic characteristics for 74HCT4052 GND = 0 V; t = t = 6 ns; C = 50 pF; for test circuit see Figure 15. r f L V is the input voltage at a nYn or nZ terminal, whichever is assigned as an input. is V is the output voltage at a nYn or nZ terminal, whichever is assigned as an output. os [1] Symbol Parameter Conditions Min Typ Max Unit T = -40 °C to +85 °C amb [2] t propagation delay V to V ; R = ∞ Ω; see Figure 13 pd is os L V = 4.5 V; V = 0 V - 5 15 ns CC EE V = 4.5 V; V = -4.5 V - 4 10 ns CC EE [3] t turn-on time E, Sn to V ; R = 1 kΩ; see Figure 14 on os L V = 4.5 V; V = 0 V - 41 88 ns CC EE V = 5.0 V; V = 0 V; C = 15 pF - 18 - ns CC EE L V = 4.5 V; V = -4.5 V - 28 60 ns CC EE [4] t turn-off time E, Sn to V ; R = 1 kΩ; see Figure 14 off os L V = 4.5 V; V = 0 V - 26 63 ns CC EE V = 5.0 V; V = 0 V; C = 15 pF - 13 - ns CC EE L V = 4.5 V; V = -4.5 V - 21 48 ns CC EE [5] C power dissipation per switch; V = GND to V - 1.5 V - 57 - pF PD I CC capacitance T = -40 °C to +125 °C amb [2] t propagation delay V to V ; R = ∞ Ω; see Figure 13 pd is os L V = 4.5 V; V = 0 V - - 18 ns CC EE V = 4.5 V; V = -4.5 V - - 12 ns CC EE [3] t turn-on time E, Sn to V ; R = 1 kΩ; see Figure 14 on os L V = 4.5 V; V = 0 V - - 105 ns CC EE V = 4.5 V; V = -4.5 V - - 72 ns CC EE [4] t turn-off time E, Sn to V ; R = 1 kΩ; see Figure 14 off os L V = 4.5 V; V = 0 V - - 75 ns CC EE V = 4.5 V; V = -4.5 V - - 57 ns CC EE [1] All typical values are measured at Tamb = 25 °C. [2] tpd is the same as tPHL and tPLH. [3] ton is the same as tPZH and tPZL. [4] toff is the same as tPHZ and tPLZ. [5] CPD is used to determine the dynamic power dissipation (PD in μW). PD = CPD x VCC2 x fi x N + Σ{(CL + Csw) x VCC2 x fo} where: fi = input frequency in MHz; fo = output frequency in MHz; N = number of inputs switching; Σ{(CL + Csw) x VCC2 x fo} = sum of outputs; CL = output load capacitance in pF; Csw = switch capacitance in pF; VCC = supply voltage in V. 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 15 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer Visinput 50% tPLH tPHL Vosoutput 50% 001aad555 Figure 13.  Input (V ) to output (V ) propagation delays is os VI E,Sninputs VM 0V tPZL tPLZ Vosoutput 50% 10% tPHZ tPZH 90% 50% Vosoutput switchON switchOFF switchON 001aae330 For 74HC4052: V = 0.5 × V . M CC For 74HCT4052: V = 1.3 V. M Figure 14.  Turn-on and turn-off times 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 16 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer tW VI 90% negative pulse VM VM 10% 0V tf tr tr tf VI 90% positive pulse VM VM 10% 0V tW VCC Vis VCC PULSE VI Vos RL S1 DUT open GENERATOR RT CL GND VEE 001aae382 Definitions for test circuit; see Table 11: R = Termination resistance should be equal to the output impedance Z of the pulse generator. T o C = Load capacitance including jig and probe capacitance. L R = Load resistance. L S1 = Test selection switch. Figure 15.  Test circuit for measuring switching times Table 11. Test data Test Input Load S1 position V V t, t C R I is r f L L [1] at f other max [2] t , t pulse < 2 ns 6 ns 50 pF 1 kΩ open PHL PLH [2] t , t V < 2 ns 6 ns 50 pF 1 kΩ V PZH PHZ CC EE [2] t , t V < 2 ns 6 ns 50 pF 1 kΩ V PZL PLZ EE CC [1] tr = tf = 6 ns; when measuring fmax, there is no constraint to tr and tf with 50 % duty factor. [2] VI values: For 74HC4052: VI = VCC For 74HCT4052: VI = 3 V 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 17 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 12 Additional dynamic characteristics Table 12. Additional dynamic characteristics Recommended conditions and typical values; GND = 0 V; T = 25 °C; C = 50 pF. amb L V is the input voltage at pins nYn or nZ, whichever is assigned as an input. is V is the output voltage at pins nYn or nZ, whichever is assigned as an output. os Symbol Parameter Conditions Min Typ Max Unit d sine-wave distortion f = 1 kHz; R = 10 kΩ; see Figure 16 sin i L V = 4.0 V (p-p); V = 2.25 V; V = -2.25 V - 0.04 - % is CC EE V = 8.0 V (p-p); V = 4.5 V; V = -4.5 V - 0.02 - % is CC EE f = 10 kHz; R = 10 kΩ; see Figure 16 i L V = 4.0 V (p-p); V = 2.25 V; V = -2.25 V - 0.12 - % is CC EE V = 8.0 V (p-p); V = 4.5 V; V = -4.5 V - 0.06 - % is CC EE α isolation (OFF-state) R = 600 Ω; f = 1 MHz; see Figure 17 iso L i [1] V = 2.25 V; V = -2.25 V - -50 - dB CC EE [1] V = 4.5 V; V = -4.5 V - -50 - dB CC EE Xtalk crosstalk between two switches/multiplexers; R = 600 Ω; L f = 1 MHz; see Figure 18 i [1] V = 2.25 V; V = -2.25 V - -60 - dB CC EE [1] V = 4.5 V; V = -4.5 V - -60 - dB CC EE V crosstalk voltage peak-to-peak value; between control and any switch; ct R = 600 Ω; f = 1 MHz; E or Sn square wave between L i V and GND; t = t = 6 ns; see Figure 19 CC r f V = 4.5 V; V = 0 V - 110 - mV CC EE V = 4.5 V; V = -4.5 V - 220 - mV CC EE f -3 dB frequency response R = 50 Ω; see Figure 20 (-3dB) L [2] V = 2.25 V; V = -2.25 V - 170 - MHz CC EE [2] V = 4.5 V; V = -4.5 V - 180 - MHz CC EE [1] Adjust input voltage Vis to 0 dBm level (0 dBm = 1 mW into 600 Ω). [2] Adjust input voltage Vis to 0 dBm level at Vos for 1 MHz (0 dBm = 1 mW into 50 Ω). VCC Sn 10µF nYn/nZ nZ/nYn Vis Vos VEE GND RL CL dB 001aah829 Figure 16.  Test circuit for measuring sine-wave distortion 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 18 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer VCC Sn 0.1µF nYn/nZ nZ/nYn Vis Vos VEE GND RL CL dB 001aah871 V = 4.5 V; GND = 0 V; V = -4.5 V; R = 600 Ω; R = 1 kΩ. CC EE L S a. Test circuit 001aae332 0 αiso (dB) -20 -40 -60 -80 -100 10 102 103 104 105 106 fi(kHz) b. Isolation (OFF-state) as a function of frequency Figure 17.  Test circuit for measuring isolation (OFF-state) VCC Sn 0.1µF RL nYn/nZ nZ/nYn Vis VEE GND RL CL VCC Sn nYn/nZ nZ/nYn Vos RL VEE GND RL CL dB 001aah873 Figure 18.  Test circuits for measuring crosstalk between any two switches/multiplexers 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 19 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 2RL VCC 2RL Sn,E Vct nYn nZ G 2RL VEE GND 2RL oscilloscope 001aah913 Figure 19.  Test circuit for measuring crosstalk between control input and any switch VCC Sn 10µF nYn/nZ nZ/nYn Vis Vos VEE GND RL CL dB 001aah829 V = 4.5 V; GND = 0 V; V = -4.5 V; R = 50 Ω; R = 1 kΩ. CC EE L S a. Test circuit 001aad551 5 Vos (dB) 3 1 -1 -3 -5 10 102 103 104 105 106 f(kHz) b. Typical frequency response Figure 20.  Test circuit for frequency response 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 20 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 13 Package outline SO16:plasticsmalloutlinepackage;16leads;bodywidth3.9mm SOT109-1 D E A X c y HE v M A Z 16 9 Q A2 A1 (A3) A pin1index θ Lp 1 8 L e w M detailX bp 0 2.5 5mm scale DIMENSIONS(inchdimensionsarederivedfromtheoriginalmmdimensions) UNIT mAax. A1 A2 A3 bp c D(1) E(1) e HE L Lp Q v w y Z(1) θ 0.25 1.45 0.49 0.25 10.0 4.0 6.2 1.0 0.7 0.7 mm 1.75 0.25 1.27 1.05 0.25 0.25 0.1 0.10 1.25 0.36 0.19 9.8 3.8 5.8 0.4 0.6 0.3 8o 0.010 0.057 0.019 0.0100 0.39 0.16 0.244 0.039 0.028 0.028 0o inches 0.069 0.01 0.05 0.041 0.01 0.01 0.004 0.004 0.049 0.014 0.0075 0.38 0.15 0.228 0.016 0.020 0.012 Note 1.Plasticormetalprotrusionsof0.15mm(0.006inch)maximumpersidearenotincluded. OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT109-1 076E07 MS-012 03-02-19 Figure 21.  Package outline SOT109-1 (SO16) 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 21 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer SSOP16:plasticshrinksmalloutlinepackage;16leads;bodywidth5.3mm SOT338-1 D E A X c y HE v M A Z 16 9 Q A2 A1 (A3) A pin1index θ Lp L 1 8 detailX w M e bp 0 2.5 5mm scale DIMENSIONS(mmaretheoriginaldimensions) UNIT mAax. A1 A2 A3 bp c D(1) E(1) e HE L Lp Q v w y Z(1) θ 0.21 1.80 0.38 0.20 6.4 5.4 7.9 1.03 0.9 1.00 8o mm 2 0.05 1.65 0.25 0.25 0.09 6.0 5.2 0.65 7.6 1.25 0.63 0.7 0.2 0.13 0.1 0.55 0o Note 1.Plasticormetalprotrusionsof0.25mmmaximumpersidearenotincluded. OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT338-1 MO-150 03-02-19 Figure 22.  Package outline SOT338-1 (SSOP16) 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 22 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer TSSOP16:plasticthinshrinksmalloutlinepackage;16leads;bodywidth4.4mm SOT403-1 D E A X c y HE v M A Z 16 9 Q A2 (A3) A pin1index A1 θ Lp L 1 8 detailX w M e bp 0 2.5 5mm scale DIMENSIONS(mmaretheoriginaldimensions) UNIT mAax. A1 A2 A3 bp c D(1) E(2) e HE L Lp Q v w y Z(1) θ 0.15 0.95 0.30 0.2 5.1 4.5 6.6 0.75 0.4 0.40 8o mm 1.1 0.05 0.80 0.25 0.19 0.1 4.9 4.3 0.65 6.2 1 0.50 0.3 0.2 0.13 0.1 0.06 0o Notes 1.Plasticormetalprotrusionsof0.15mmmaximumpersidearenotincluded. 2.Plasticinterleadprotrusionsof0.25mmmaximumpersidearenotincluded. OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT403-1 MO-153 03-02-18 Figure 23.  Package outline SOT403-1 (TSSOP16) 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 23 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer DHVQFN16:plasticdualin-linecompatiblethermalenhancedverythinquadflatpackage;noleads; 16terminals;body2.5x3.5x0.85mm SOT763-1 D B A A A1 E c terminal1 detailX indexarea terminal1 e1 C indexarea e b v M C A B y1 C y w M C 2 7 L 1 8 Eh e 16 9 15 10 Dh X 0 2.5 5mm scale DIMENSIONS(mmaretheoriginaldimensions) A(1) UNIT max. A1 b c D(1) Dh E(1) Eh e e1 L v w y y1 0.05 0.30 3.6 2.15 2.6 1.15 0.5 mm 1 0.2 0.5 2.5 0.1 0.05 0.05 0.1 0.00 0.18 3.4 1.85 2.4 0.85 0.3 Note 1.Plasticormetalprotrusionsof0.075mmmaximumpersidearenotincluded. OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION 02-10-17 SOT763-1 --- MO-241 --- 03-01-27 Figure 24.  Package outline SOT763-1 (DHVQFN16) 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 24 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 14 Abbreviations Table 13. Abbreviations Acronym Description CMOS Complementary Metal Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model 15 Revision history Table 14. Revision history Document ID Release date Data sheet status Change notice Supersedes 74HC_HCT4052 v.12 20171010 Product data sheet - 74HC_HCT4052 v.11 Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. • Legal texts have been adapted to the new company name where appropriate. 74HC_HCT4052 v.11 20160210 Product data sheet - 74HC_HCT4052 v.10 Modifications: • Type numbers 74HC4052N and 74HCT4052N (SOT38-4) removed. 74HC_HCT4052 v.10 20120719 Product data sheet - 74HC_HCT4052 v.9 Modifications: • CDM added to features. 74HC_HCT4052 v.9 20111213 Product data sheet - 74HC_HCT4052 v.8 Modifications: • Legal pages updated. 74HC_HCT4052 v.8 20110511 Product data sheet - 74HC_HCT4052 v.7 74HC_HCT4052 v.7 20110112 Product data sheet - 74HC_HCT4052 v.6 74HC_HCT4052 v.6 20100111 Product data sheet - 74HC_HCT4052 v.5 74HC_HCT4052 v.5 20080505 Product data sheet - 74HC_HCT4052 v.4 74HC_HCT4052 v.4 20041111 Product specification - 74HC_HCT4052 v.3 74HC_HCT4052 v.3 20030516 Product specification - 74HC_HCT4052 v.2 74HC_HCT4052 v.2 19901201 - - - 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 25 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer 16 Legal information 16.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. systems or equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal 16.2 Definitions injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in Draft — The document is a draft version only. The content is still under such equipment or applications and therefore such inclusion and/or use is at internal review and subject to formal approval, which may result in the customer’s own risk. modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein Applications — Applications that are described herein for any of these and shall have no liability for the consequences of use of such information. products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use Short data sheet — A short data sheet is an extract from a full data sheet without further testing or modification. Customers are responsible for the with the same product type number(s) and title. A short data sheet is design and operation of their applications and products using Nexperia intended for quick reference only and should not be relied upon to contain products, and Nexperia accepts no liability for any assistance with detailed and full information. For detailed and full information see the applications or customer product design. It is customer’s sole responsibility relevant full data sheet, which is available on request via the local Nexperia to determine whether the Nexperia product is suitable and fit for the sales office. In case of any inconsistency or conflict with the short data sheet, customer’s applications and products planned, as well as for the planned the full data sheet shall prevail. application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks Product specification — The information and data provided in a Product associated with their applications and products. Nexperia does not accept data sheet shall define the specification of the product as agreed between any liability related to any default, damage, costs or problem which is based Nexperia and its customer, unless Nexperia and customer have explicitly on any weakness or default in the customer’s applications or products, or agreed otherwise in writing. In no event however, shall an agreement be the application or use by customer’s third party customer(s). Customer is valid in which the Nexperia product is deemed to offer functions and qualities responsible for doing all necessary testing for the customer’s applications beyond those described in the Product data sheet. and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. 16.3 Disclaimers Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent Limited warranty and liability — Information in this document is believed damage to the device. Limiting values are stress ratings only and (proper) to be accurate and reliable. However, Nexperia does not give any operation of the device at these or any other conditions above those representations or warranties, expressed or implied, as to the accuracy given in the Recommended operating conditions section (if present) or the or completeness of such information and shall have no liability for the Characteristics sections of this document is not warranted. Constant or consequences of use of such information. Nexperia takes no responsibility repeated exposure to limiting values will permanently and irreversibly affect for the content in this document if provided by an information source outside the quality and reliability of the device. of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal Terms and conditions of commercial sale — Nexperia products are or replacement of any products or rework charges) whether or not such sold subject to the general terms and conditions of commercial sale, as damages are based on tort (including negligence), warranty, breach of published at http://www.nexperia.com/profile/terms, unless otherwise agreed contract or any other legal theory. Notwithstanding any damages that in a valid written individual agreement. In case an individual agreement is customer might incur for any reason whatsoever, Nexperia's aggregate and concluded only the terms and conditions of the respective agreement shall cumulative liability towards customer for the products described herein shall apply. Nexperia hereby expressly objects to applying the customer’s general be limited in accordance with the Terms and conditions of commercial sale of terms and conditions with regard to the purchase of Nexperia products by Nexperia. customer. Right to make changes — Nexperia reserves the right to make changes No offer to sell or license — Nothing in this document may be interpreted to information published in this document, including without limitation or construed as an offer to sell products that is open for acceptance or specifications and product descriptions, at any time and without notice. This the grant, conveyance or implication of any license under any copyrights, document supersedes and replaces all information supplied prior to the patents or other industrial or intellectual property rights. publication hereof. Export control — This document as well as the item(s) described herein Suitability for use — Nexperia products are not designed, authorized or may be subject to export control regulations. Export might require a prior warranted to be suitable for use in life support, life-critical or safety-critical authorization from competent authorities. 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 26 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer Non-automotive qualified products — Unless this data sheet expressly design and use of the product for automotive applications beyond Nexperia's states that this specific Nexperia product is automotive qualified, the standard warranty and Nexperia's product specifications. product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia Translations — A non-English (translated) version of a document is for accepts no liability for inclusion and/or use of non-automotive qualified reference only. The English version shall prevail in case of any discrepancy products in automotive equipment or applications. In the event that customer between the translated and English versions. uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia's warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for 16.4 Trademarks automotive applications beyond Nexperia's specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia Notice: All referenced brands, product names, service names and for any liability, damages or failed product claims resulting from customer trademarks are the property of their respective owners. 74HC_HCT4052 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 12 — 10 October 2017 27 / 28

Nexperia 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer Contents 1 General description ............................................1 2 Features and benefits .........................................1 3 Applications .........................................................1 4 Ordering information ..........................................2 5 Functional diagram .............................................2 6 Pinning information ............................................4 6.1 Pinning ...............................................................4 6.2 Pin description ...................................................4 7 Functional description ........................................5 8 Limiting values ....................................................5 9 Recommended operating conditions ................6 10 Static characteristics ..........................................7 11 Dynamic characteristics ...................................13 12 Additional dynamic characteristics .................18 13 Package outline .................................................21 14 Abbreviations ....................................................25 15 Revision history ................................................25 16 Legal information ..............................................26 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section 'Legal information'. © Nexperia B.V. 2017. All rights reserved. For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 10 October 2017 Document identifier: 74HC_HCT4052