74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state Rev. 6 — 6 September 2017 Product data sheet 1 General description The 74HC1G125; 74HCT1G125 is a single buffer/line driver with 3-state output. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of V . CC 2 Features and benefits • Wide supply voltage range from 2.0 V to 6.0 V • Input levels: –For 74HC1G125: CMOS level –For 74HCT1G125: TTL level • Low power dissipation • Symmetrical output impedance • High noise immunity • Balanced propagation delays • ESD protection –HBM EIA/JESD22-A114-C exceeds 2000V –MM EIA/JESD22-A115-A exceeds 200V • Specified from −40 °C to 85 °C and −40 °C to 125 °C 3 Ordering information Table 1. Ordering information Type number Package Temperature Name Description Version range 74HC1G125GW -40 °C to +125 °C TSSOP5 plastic thin shrink small outline package; 5 leads; SOT353-1 body width 1.25 mm 74HCT1G125GW 74HC1G125GV -40 °C to +125 °C SC-74A plastic surface mounted package; 5 leads SOT753 74HCT1G125GV 4 Marking Table 2. Marking [1] Type number Marking code 74HC1G125GW HM 74HCT1G125GW TM

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state [1] Type number Marking code 74HC1G125GV H25 74HCT1G125GV T25 [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code. 5 Functional diagram 2 A Y 4 A Y 2 4 1 OE 1 EN OE mna118 mna119 mna120 Figure 1. Logic symbol Figure 2. IEC logic symbol Figure 3. Logic diagram 6 Pinning information 6.1 Pinning 74HC1G125GW 74HC1G125GV 74HCT1G125GW 74HCT1G125GV OE 1 5 VCC OE 1 5 VCC A 2 A 2 GND 3 4 Y GND 3 4 Y 001aad948 001aad949 Figure 4. Pin configuration TSSOP5 Figure 5. Pin configuration SC-74A 6.2 Pin description Table 3. Pin description Symbol Pin Description OE 1 output enable input (active LOW) A 2 data input GND 3 ground (0 V) Y 4 data output V 5 supply voltage CC 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 2 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state 7 Functional description [1] Table 4. Function table Control Input Output OE A Y L L L L H H H X Z [1] H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state. 8 Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit V supply voltage -0.5 +7.0 V CC [1] I input clamping current V < -0.5 V or V > V + 0.5 V - ±20 mA IK I I CC [1] I output clamping current V < -0.5 V or V > V + 0.5 V - ±20 mA OK O O CC [1] I output current V = -0.5 V to (V + 0.5 V) - ±35 mA O O CC I supply current - 70 mA CC I ground current -70 - mA GND T storage temperature -65 +150 °C stg [2] P total power dissipation T = -40 °C to +125 °C - 200 mW tot amb [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] Above 55 °C the value of Ptot derates linearly with 2.5 mW/K. 9 Recommended operating conditions Table 6. Recommended operating conditions Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions 74HC1G125 74HCT1G125 Unit Min Typ Max Min Typ Max V supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V CC V input voltage 0 - V 0 - V V I CC CC V output voltage 0 - V 0 - V V O CC CC T ambient temperature -40 +25 +125 -40 +25 +125 °C amb Δt/ΔV input transition rise and V = 2.0 V - - 625 - - - ns/V CC fall rate V = 4.5 V - 1.67 139 - 1.67 139 ns/V CC V = 6.0 V - - 83 - - - ns/V CC 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 3 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state 10 Static characteristics Table 7. Static characteristics 74HC1G125 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions T = −40 °C T = −40 °C Unit amb amb to +85 °C to +125 °C [1] Min Typ Max Min Max V HIGH-level input V = 2.0 V 1.5 1.2 - 1.5 - V IH CC voltage V = 4.5 V 3.15 2.4 - 3.15 - V CC V = 6.0 V 4.2 3.2 - 4.2 - V CC V LOW-level input V = 2.0 V - 0.8 0.5 - 0.5 V IL CC voltage V = 4.5 V - 2.1 1.35 - 1.35 V CC V = 6.0 V - 2.8 1.8 - 1.8 V CC V HIGH-level output V = V or V OH I IH IL voltage I = -20 μA; V = 2.0 V 1.9 2.0 - 1.9 - V O CC I = -20 μA; V = 4.5 V 4.4 4.5 - 4.4 - V O CC I = -20 μA; V = 6.0 V 5.9 6.0 - 5.9 - V O CC I = -6.0 mA; V = 4.5 V 3.84 4.32 - 3.7 - V O CC I = -7.8 mA; V = 6.0 V 5.34 5.81 - 5.2 - V O CC V LOW-level output V = V or V OL I IH IL voltage I = 20 μA; V = 2.0 V - 0 0.1 - 0.1 V O CC I = 20 μA; V = 4.5 V - 0 0.1 - 0.1 V O CC I = 20 μA; V = 6.0 V - 0 0.1 - 0.1 V O CC I = 6.0 mA; V = 4.5 V - 0.15 0.33 - 0.4 V O CC I = 7.8 mA; V = 6.0 V - 0.16 0.33 - 0.4 V O CC I input leakage current V = V or GND; V = 6.0 V - - 1.0 - 1.0 μA I I CC CC I OFF-state V = V or V ; V = V or GND; - - 5 - 10 μA OZ I IH IL O CC output current V = 6.0 V CC I supply current V = V or GND; I = 0 A; - - 10 - 20 μA CC I CC O V = 6.0 V CC C input capacitance - 1.5 - - - pF I [1] All typical values are measured at Tamb = 25 °C. 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 4 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state Table 8. Static characteristics 74HCT1G125 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions T = −40 °C T = −40 °C Unit amb amb to +85 °C to +125 °C [1] Min Typ Max Min Max V HIGH-level input V = 4.5 V to 5.5 V 2.0 1.6 - 2.0 - V IH CC voltage V LOW-level input V = 4.5 V to 5.5 V - 1.2 0.8 - 0.8 V IL CC voltage V HIGH-level output V = V or V ; V = 4.5 V OH I IH IL CC voltage I = -20 μA 4.4 4.5 - 4.4 - V O I = -6.0 mA 3.84 4.32 - 3.7 - V O V LOW-level output V = V or V ; V = 4.5 V OL I IH IL CC voltage I = 20 μA - 0 0.1 - 0.1 V O I = 6.0 mA - 0.16 0.33 - 0.4 V O I input leakage current V = V or GND; V = 5.5 V - - 1.0 - 1.0 μA I I CC CC I OFF-state V = V or V ; V = V or GND; - - 5 - 10 μA OZ I IH IL O CC output current V = 5.5 V CC I supply current V = V or GND; I = 0 A; - - 10 - 20 μA CC I CC O V = 5.5 V CC ΔI additional supply V = V - 2.1 V; I = 0 A; - - 500 - 850 μA CC I CC O current V = 4.5 V to 5.5 V CC C input capacitance - 1.5 - - - pF I [1] All typical values are measured at Tamb = 25 °C. 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 5 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state 11 Dynamic characteristics Table 9. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); C = 50 pF unless otherwise specified; for test circuit see Figure 8 L Symbol Parameter Conditions T = -40 °C to +125 °C Unit amb [1] Min Typ Max Max +85 °C +125 °C 74HC1G125 [2] t propagation delay A to Y; see Figure 6 pd V = 2.0 V - 24 125 150 ns CC V = 4.5 V - 10 25 30 ns CC V = 5 V; C = 15 pF - 9 - - ns CC L V = 6.0 V - 8 21 26 ns CC [2] t enable time OE to Y; see Figure 7 en V = 2.0 V - 19 155 190 ns CC V = 4.5 V - 9 31 38 ns CC V = 6.0 V - 7 26 32 ns CC [2] t disable time OE to Y; see Figure 7 dis V = 2.0 V - 18 155 190 ns CC V = 4.5 V - 12 31 38 ns CC V = 6.0 V - 11 26 32 ns CC [3] C power dissipation V = GND to V - 30 - - pF PD I CC capacitance 74HCT1G125 [2] t propagation delay A to Y; see Figure 6 pd V = 4.5 V - 11 30 36 ns CC V = 5 V; C = 15 pF - 10 - - ns CC L [2] t enable time V = 4.5 V; OE to Y; see Figure 7 - 10 35 42 ns en CC [2] t disable time V = 4.5 V; OE to Y; see Figure 7 - 11 31 38 ns dis CC [3] C power dissipation V = GND to V - 1.5 V - 27 - - pF PD I CC capacitance [1] All typical values are measured at Tamb = 25 °C. [2] tpd is the same as tPLH and tPHL. ten is the same as tPZL and tPZH. tdis is the same as tPLZ and tPHZ. [3] CPD is used to determine the dynamic power dissipation (PD in μW). PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; Σ(CL × VCC2 × fo) = sum of the outputs. 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 6 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state 11.1 Waveforms and test circuit VI Ainput VM GND tPHL tPLH Youtput VM 001aad070 Measurement points are given in Table 10. Figure 6. Propagation delay data input (A) to output (Y) VI OEinput VM GND tPLZ tPZL VCC output LOW-to-OFF VM OFF-to-LOW VOL VX tPHZ tPZH VOH VY output HIGH-to-OFF VM OFF-to-HIGH GND outputs outputs outputs enabled disabled enabled mna644 Measurement points are given in Table 10. V and V are typical output voltage levels that occur with the output load. OL OH Figure 7. Enable and disable times Table 10. Measurement points Type Input Output V V V V M M X Y 74HC1G125 0.5V 0.5V V + 0.3 V V - 0.3 V CC CC OL OH 74HCT1G125 1.3 V 1.3 V V + 0.3 V V - 0.3 V OL OH 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 7 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state tW VI 90% negative pulse VM VM 10% 0V tf tr tr tf VI 90% positive pulse VM VM 10% 0V tW VCC VCC VI VO RL S1 G DUT open RT CL 001aad983 Test data is given in Table 11. Definitions for test circuit: R = Termination resistance should be equal to the output impedance Z of the pulse generator T o C = Load capacitance including jig and probe capacitance L R = Load resistance L S1 = Test selection switch Figure 8. Test circuit for measuring switching times Table 11. Test data Type Input Load S1 position V t, t C R t , t t , t t , t I r f L L PLH PHL PZH PHZ PZL PLZ 74HC1G125 V 6 ns 15 pF, 50 pF 1 kΩ open GND V CC CC 74HCT1G125 3 V 6 ns 15 pF, 50 pF 1 kΩ open GND V CC 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 8 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state 12 Package outline TSSOP5:plasticthinshrinksmalloutlinepackage;5leads;bodywidth1.25mm SOT353-1 D E A X c y HE v M A Z 5 4 A2 A A1 (A3) θ 1 3 Lp L e w M bp e1 detailX 0 1.5 3mm scale DIMENSIONS(mmaretheoriginaldimensions) UNIT mAax. A1 A2 A3 bp c D(1) E(1) e e1 HE L Lp v w y Z(1) θ 0.1 1.0 0.30 0.25 2.25 1.35 2.25 0.46 0.60 7° mm 1.1 0.15 0.65 1.3 0.425 0.3 0.1 0.1 0 0.8 0.15 0.08 1.85 1.15 2.0 0.21 0.15 0° Note 1.Plasticormetalprotrusionsof0.15mmmaximumpersidearenotincluded. OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION 00-09-01 SOT353-1 MO-203 SC-88A 03-02-19 Figure 9. Package outline SOT353-1 (TSSOP5) 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 9 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state Plasticsurface-mountedpackage;5leads SOT753 D B E A X y HE v M A 5 4 Q A A1 c 1 2 3 Lp detailX e bp w M B 0 1 2mm scale DIMENSIONS(mmaretheoriginaldimensions) UNIT A A1 bp c D E e HE Lp Q v w y 1.1 0.100 0.40 0.26 3.1 1.7 3.0 0.6 0.33 mm 0.95 0.2 0.2 0.1 0.9 0.013 0.25 0.10 2.7 1.3 2.5 0.2 0.23 OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION 02-04-16 SOT753 SC-74A 06-03-16 Figure 10. Package outline SOT753 (SC-74A) 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 10 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state 13 Abbreviations Table 12. Abbreviations Acronym Description CMOS Complementary Metal-Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 14 Revision history Table 13. Revision history Document ID Release date Data sheet status Change notice Supersedes 74HC_HCT1G125 v.6 20170906 Product data sheet - 74HC_HCT1G125 v.5 Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. • Legal texts have been adapted to the new company name where appropriate. 74HC_HCT1G125 v.5 20051223 Product data sheet ECN05_085 74HC_HCT1G125 v.4 Modifications: • The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors. • In Table 5 Limiting values – IO: changed max value ±12.5 into ±35 – ICC: changed max value 25 into 70 – IGND: changed max value -25 into -70 • In Table 7 Static characteristics 74HC1G125 – VOH: changed condition IO = -2.0 mA into IO = -6.0 mA and min value from 4.13 into 3.84 – VOH: changed condition IO = -2.6 mA into IO = -7.8 mA and min value from 5.63 into 5.34 – VOL: changed condition IO = 2.0 mA into IO = 6.0 mA – VOL: changed condition IO = 2.6 mA into IO = 7.8 mA – VOH: changed condition IO = -2.0 mA into IO = -6.0 mA – VOL: changed condition IO = 2.0 mA into IO = 6.0 mA • In Table 8 Static characteristics 74HCT1G125 – VOH: changed condition IO = -2.0 mA into IO = -6.0 mA and min value from 4.13 into 3.84 – VOL: changed condition IO = 2.0 mA into IO = 6.0 mA and typ value from 0.15 into 0.16 – VOH: changed condition IO = -2.0 mA into IO = -6.0 mA – VOL: changed condition IO = 2.0 mA into IO = 6.0 mA 74HC_HCT1G125 v.4 20040727 Product specification - 74HC_HCT1G125 v.3 74HC_HCT1G125 v.3 20020517 Product specification - 74HC_HCT1G125 v.2 74HC_HCT1G125 v.2 20010302 Product specification - 74HC_HCT1G125 v.1 74HC_HCT1G125 v.1 19981110 Product specification - - 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 11 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state 15 Legal information 15.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. systems or equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal 15.2 Definitions injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in Draft — The document is a draft version only. The content is still under such equipment or applications and therefore such inclusion and/or use is at internal review and subject to formal approval, which may result in the customer’s own risk. modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein Applications — Applications that are described herein for any of these and shall have no liability for the consequences of use of such information. products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use Short data sheet — A short data sheet is an extract from a full data sheet without further testing or modification. Customers are responsible for the with the same product type number(s) and title. A short data sheet is design and operation of their applications and products using Nexperia intended for quick reference only and should not be relied upon to contain products, and Nexperia accepts no liability for any assistance with detailed and full information. For detailed and full information see the applications or customer product design. It is customer’s sole responsibility relevant full data sheet, which is available on request via the local Nexperia to determine whether the Nexperia product is suitable and fit for the sales office. In case of any inconsistency or conflict with the short data sheet, customer’s applications and products planned, as well as for the planned the full data sheet shall prevail. application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks Product specification — The information and data provided in a Product associated with their applications and products. Nexperia does not accept data sheet shall define the specification of the product as agreed between any liability related to any default, damage, costs or problem which is based Nexperia and its customer, unless Nexperia and customer have explicitly on any weakness or default in the customer’s applications or products, or agreed otherwise in writing. In no event however, shall an agreement be the application or use by customer’s third party customer(s). Customer is valid in which the Nexperia product is deemed to offer functions and qualities responsible for doing all necessary testing for the customer’s applications beyond those described in the Product data sheet. and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. 15.3 Disclaimers Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent Limited warranty and liability — Information in this document is believed damage to the device. Limiting values are stress ratings only and (proper) to be accurate and reliable. However, Nexperia does not give any operation of the device at these or any other conditions above those representations or warranties, expressed or implied, as to the accuracy given in the Recommended operating conditions section (if present) or the or completeness of such information and shall have no liability for the Characteristics sections of this document is not warranted. Constant or consequences of use of such information. Nexperia takes no responsibility repeated exposure to limiting values will permanently and irreversibly affect for the content in this document if provided by an information source outside the quality and reliability of the device. of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal Terms and conditions of commercial sale — Nexperia products are or replacement of any products or rework charges) whether or not such sold subject to the general terms and conditions of commercial sale, as damages are based on tort (including negligence), warranty, breach of published at http://www.nexperia.com/profile/terms, unless otherwise agreed contract or any other legal theory. Notwithstanding any damages that in a valid written individual agreement. In case an individual agreement is customer might incur for any reason whatsoever, Nexperia's aggregate and concluded only the terms and conditions of the respective agreement shall cumulative liability towards customer for the products described herein shall apply. Nexperia hereby expressly objects to applying the customer’s general be limited in accordance with the Terms and conditions of commercial sale of terms and conditions with regard to the purchase of Nexperia products by Nexperia. customer. Right to make changes — Nexperia reserves the right to make changes No offer to sell or license — Nothing in this document may be interpreted to information published in this document, including without limitation or construed as an offer to sell products that is open for acceptance or specifications and product descriptions, at any time and without notice. This the grant, conveyance or implication of any license under any copyrights, document supersedes and replaces all information supplied prior to the patents or other industrial or intellectual property rights. publication hereof. Export control — This document as well as the item(s) described herein Suitability for use — Nexperia products are not designed, authorized or may be subject to export control regulations. Export might require a prior warranted to be suitable for use in life support, life-critical or safety-critical authorization from competent authorities. 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 12 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state Non-automotive qualified products — Unless this data sheet expressly design and use of the product for automotive applications beyond Nexperia's states that this specific Nexperia product is automotive qualified, the standard warranty and Nexperia's product specifications. product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia Translations — A non-English (translated) version of a document is for accepts no liability for inclusion and/or use of non-automotive qualified reference only. The English version shall prevail in case of any discrepancy products in automotive equipment or applications. In the event that customer between the translated and English versions. uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia's warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for 15.4 Trademarks automotive applications beyond Nexperia's specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia Notice: All referenced brands, product names, service names and for any liability, damages or failed product claims resulting from customer trademarks are the property of their respective owners. 74HC_HCT1G125 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 6 — 6 September 2017 13 / 14

Nexperia 74HC1G125; 74HCT1G125 Bus buffer/line driver; 3-state Contents 1 General description ............................................1 2 Features and benefits .........................................1 3 Ordering information ..........................................1 4 Marking .................................................................1 5 Functional diagram .............................................2 6 Pinning information ............................................2 6.1 Pinning ...............................................................2 6.2 Pin description ...................................................2 7 Functional description ........................................3 8 Limiting values ....................................................3 9 Recommended operating conditions ................3 10 Static characteristics ..........................................4 11 Dynamic characteristics .....................................6 11.1 Waveforms and test circuit ................................7 12 Package outline ...................................................9 13 Abbreviations ....................................................11 14 Revision history ................................................11 15 Legal information ..............................................12 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section 'Legal information'. © Nexperia B.V. 2017. All rights reserved. For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 6 September 2017 Document identifier: 74HC_HCT1G125