74AUP1G74 Low-power D-type flip-flop with set and reset; positive- edge trigger Rev. 11 — 3 July 2017 Product data sheet 1 General description The 74AUP1G74 provides a low-power, low-voltage single positive-edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs and complementary Q and Q outputs. The SD and RD are asynchronous active LOW inputs and operate independently of the clock input. Information on the data input is transferred to the Q output on the LOW-to-HIGH transition of the clock pulse. The D input must be stable one set-up time prior to the LOW-to-HIGH clock transition for predictable operation. Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire V range from 0.8 V to 3.6 V. CC This device ensures a very low static and dynamic power consumption across the entire V range from 0.8 V to 3.6 V. CC This device is fully specified for partial power-down applications using I . The I OFF OFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. 2 Features and benefits • Wide supply voltage range from 0.8 V to 3.6 V • High noise immunity • Complies with JEDEC standards: –JESD8-12 (0.8 V to 1.3 V) –JESD8-11 (0.9 V to 1.65 V) –JESD8-7 (1.2 V to 1.95 V) –JESD8-5 (1.8 V to 2.7 V) –JESD8-B (2.7 V to 3.6 V) • ESD protection: –HBM JESD22-A114F Class 3A exceeds 5000 V –MM JESD22-A115-A exceeds 200 V –CDM JESD22-C101E exceeds 1000 V • Low static power consumption; I = 0.9 μA (maximum) CC • Latch-up performance exceeds 100 mA per JESD 78 Class II • Inputs accept voltages up to 3.6 V • Low noise overshoot and undershoot < 10 % of V CC • I circuitry provides partial power-down mode operation OFF • Multiple package options • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 3 Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74AUP1G74DC -40 °C to +125 °C VSSOP8 plastic very thin shrink small outline package; 8 leads; SOT765-1 body width 2.3 mm 74AUP1G74GT -40 °C to +125 °C XSON8 plastic extremely thin small outline package; no leads; SOT833-1 8 terminals; body 1 × 1.95 × 0.5 mm 74AUP1G74GF -40 °C to +125 °C XSON8 extremely thin small outline package; no leads; SOT1089 8 terminals; body 1.35 × 1 × 0.5 mm 74AUP1G74GM -40 °C to +125 °C XQFN8 plastic, extremely thin quad flat package; no leads; SOT902-2 8 terminals; body 1.6 × 1.6 × 0.5 mm 74AUP1G74GN -40 °C to +125 °C XSON8 extremely thin small outline package; no leads; SOT1116 8 terminals; body 1.2 × 1.0 × 0.35 mm 74AUP1G74GS -40 °C to +125 °C XSON8 extremely thin small outline package; no leads; SOT1203 8 terminals; body 1.35 × 1.0 × 0.35 mm 74AUP1G74GX -40 °C to +125 °C X2SON8 plastic thermal enhanced extremely thin SOT1233 small outline package; no leads; 8 terminals; body 1.35 × 0.8 × 0.35 mm 4 Marking Table 2. Marking codes [1] Type number Marking code 74AUP1G74DC p74 74AUP1G74GT p74 74AUP1G74GF 54 74AUP1G74GM p74 74AUP1G74GN 54 74AUP1G74GS 54 74AUP1G74GX 54 [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code. 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 2 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 5 Functional diagram SD SD D Q D Q CP CP S FF C1 Q Q 1D RD R RD 001aah725 001aah726 Figure 1. Logic symbol Figure 2. IEC logic symbol Q C C C C D Q C C RD SD 001aae087 CP C C Figure 3. Logic diagram 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 3 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 6 Pinning information 6.1 Pinning 74AUP1G74 CP 1 8 VCC D 2 7 SD 74AUP1G74 Q 3 6 RD CP 1 8 VCC D 2 7 SD GND 4 5 Q Q 3 6 RD 001aae323 GND 4 5 Q Transparenttopview 001aae322 Figure 5. Pin configuration SOT833-1, SOT1089, Figure 4. Pin configuration SOT765-1 SOT1116 and SOT1203 74AUP1G74 terminal1 C C indexarea V 8 74AUP1G74 SD 1 7 CP CP 1 7 SD 8 RD 2 6 D VCC D 2 6 RD Q 3 5 Q 4 4 GND D Q 3 5 Q GN 001aae324 aaa-027030 Transparenttopview Transparenttopview Figure 6. Pin configuration SOT902-2 Figure 7. Pin configuration SOT1233 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 4 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 6.2 Pin description Table 3. Pin description Symbol Pin Description SOT765-1, SOT833-1, SOT1089, SOT1116, SOT902-2 SOT1203 and SOT1233 CP 1 7 clock input D 2 6 data input Q 3 5 complement output GND 4 4 ground (0 V) Q 5 3 true output RD 6 2 asynchronous reset input (active LOW) SD 7 1 asynchronous set input (active LOW) V 8 8 supply voltage CC 7 Functional description [1] Table 4. Function table for asynchronous operation Input Output SD RD CP D Q Q L H X X H L H L X X L H L L X X H H [1] H = HIGH voltage level; L = LOW voltage level; X = don’t care. [1] Table 5. Function table for synchronous operation Input Output SD RD CP D Q Q n+1 n+1 H H ↑ L L H H H ↑ H H L [1] H = HIGH voltage level; L = LOW voltage level; X = don’t care; ↑ = LOW-to-HIGH CP transition; Qn+1 = state after the next LOW-to-HIGH CP transition. 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 5 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 8 Limiting values Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit V supply voltage -0.5 +4.6 V CC [1] V input voltage -0.5 +4.6 V I [1] V output voltage Active mode and Power-down mode -0.5 +4.6 V O I input clamping current V < 0 V -50 - mA IK I I output clamping current V < 0 V -50 - mA OK O I output current V = 0 V to V - ±20 mA O O CC I supply current - +50 mA CC I ground current -50 - mA GND T storage temperature -65 +150 °C stg [2] P total power dissipation T = -40 °C to +125 °C - 250 mW tot amb [1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For VSSOP8 packages: above 110 °C the value of Ptot derates linearly with 8.0 mW/K. For XSON8 and XQFN8 packages: above 118 °C the value of Ptot derates linearly with 7.8 mW/K. For X2SON8 package: above 118 °C the value of Ptot derates linearly with 7.7 mW/K. 9 Recommended operating conditions Table 7. Operating conditions Symbol Parameter Conditions Min Max Unit V supply voltage 0.8 3.6 V CC V input voltage 0 3.6 V I V output voltage Active mode 0 V V O CC Power-down mode; V = 0 V 0 3.6 V CC T ambient temperature -40 +125 °C amb Δt/ΔV input transition rise and fall rate V = 0.8 V to 3.6 V - 200 ns/V CC 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 6 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 10 Static characteristics Table 8. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit T = 25 °C amb V HIGH-level input voltage V = 0.8 V 0.70 × V - - V IH CC CC V = 0.9 V to 1.95 V 0.65 × V - - V CC CC V = 2.3 V to 2.7 V 1.6 - - V CC V = 3.0 V to 3.6 V 2.0 - - V CC V LOW-level input voltage V = 0.8 V - - 0.30 × V V IL CC CC V = 0.9 V to 1.95 V - - 0.35 × V V CC CC V = 2.3 V to 2.7 V - - 0.7 V CC V = 3.0 V to 3.6 V - - 0.9 V CC V HIGH-level output voltage V = V or V OH I IH IL I = -20 μA; V = 0.8 V to 3.6 V V - 0.1 - - V O CC CC I = -1.1 mA; V = 1.1 V 0.75 × V - - V O CC CC I = -1.7 mA; V = 1.4 V 1.11 - - V O CC I = -1.9 mA; V = 1.65 V 1.32 - - V O CC I = -2.3 mA; V = 2.3 V 2.05 - - V O CC I = -3.1 mA; V = 2.3 V 1.9 - - V O CC I = -2.7 mA; V = 3.0 V 2.72 - - V O CC I = -4.0 mA; V = 3.0 V 2.6 - - V O CC V LOW-level output voltage V = V or V OL I IH IL I = 20 μA; V = 0.8 V to 3.6 V - - 0.1 V O CC I = 1.1 mA; V = 1.1 V - - 0.3 × V V O CC CC I = 1.7 mA; V = 1.4 V - - 0.31 V O CC I = 1.9 mA; V = 1.65 V - - 0.31 V O CC I = 2.3 mA; V = 2.3 V - - 0.31 V O CC I = 3.1 mA; V = 2.3 V - - 0.44 V O CC I = 2.7 mA; V = 3.0 V - - 0.31 V O CC I = 4.0 mA; V = 3.0 V - - 0.44 V O CC I input leakage current V = GND to 3.6 V; V = 0 V to 3.6 V - - ±0.1 μA I I CC I power-off leakage current V or V = 0 V to 3.6 V; V = 0 V - - ±0.2 μA OFF I O CC ΔI additional power-off V or V = 0 V to 3.6 V; - - ±0.2 μA OFF I O leakage current V = 0 V to 0.2 V CC I supply current V = GND or V ; I = 0 A; - - 0.5 μA CC I CC O V = 0.8 V to 3.6 V CC 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 7 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger Symbol Parameter Conditions Min Typ Max Unit [1] ΔI additional supply current V = V - 0.6 V; I = 0 A; - - 40 μA CC I CC O V = 3.3 V; per pin CC C input capacitance V = 0 V to 3.6 V; V = GND or V - 0.6 - pF I CC I CC C output capacitance V = GND; V = 0 V - 1.3 - pF O O CC T = -40 °C to +85 °C amb V HIGH-level input voltage V = 0.8 V 0.70 × V - - V IH CC CC V = 0.9 V to 1.95 V 0.65 × V - - V CC CC V = 2.3 V to 2.7 V 1.6 - - V CC V = 3.0 V to 3.6 V 2.0 - - V CC V LOW-level input voltage V = 0.8 V - - 0.30 × V V IL CC CC V = 0.9 V to 1.95 V - - 0.35 × V V CC CC V = 2.3 V to 2.7 V - - 0.7 V CC V = 3.0 V to 3.6 V - - 0.9 V CC V HIGH-level output voltage V = V or V OH I IH IL I = -20 μA; V = 0.8 V to 3.6 V V - 0.1 - - V O CC CC I = -1.1 mA; V = 1.1 V 0.7 × V - - V O CC CC I = -1.7 mA; V = 1.4 V 1.03 - - V O CC I = -1.9 mA; V = 1.65 V 1.30 - - V O CC I = -2.3 mA; V = 2.3 V 1.97 - - V O CC I = -3.1 mA; V = 2.3 V 1.85 - - V O CC I = -2.7 mA; V = 3.0 V 2.67 - - V O CC I = -4.0 mA; V = 3.0 V 2.55 - - V O CC V LOW-level output voltage V = V or V OL I IH IL I = 20 μA; V = 0.8 V to 3.6 V - - 0.1 V O CC I = 1.1 mA; V = 1.1 V - - 0.3 × V V O CC CC I = 1.7 mA; V = 1.4 V - - 0.37 V O CC I = 1.9 mA; V = 1.65 V - - 0.35 V O CC I = 2.3 mA; V = 2.3 V - - 0.33 V O CC I = 3.1 mA; V = 2.3 V - - 0.45 V O CC I = 2.7 mA; V = 3.0 V - - 0.33 V O CC I = 4.0 mA; V = 3.0 V - - 0.45 V O CC I input leakage current V = GND to 3.6 V; V = 0 V to 3.6 V - - ±0.5 μA I I CC I power-off leakage current V or V = 0 V to 3.6 V; V = 0 V - - ±0.5 μA OFF I O CC ΔI additional power-off V or V = 0 V to 3.6 V; - - ±0.6 μA OFF I O leakage current V = 0 V to 0.2 V CC I supply current V = GND or V ; I = 0 A; - - 0.9 μA CC I CC O V = 0.8 V to 3.6 V CC 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 8 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger Symbol Parameter Conditions Min Typ Max Unit [1] ΔI additional supply current V = V - 0.6 V; I = 0 A; - - 50 μA CC I CC O V = 3.3 V; per pin CC T = -40 °C to +125 °C amb V HIGH-level input voltage V = 0.8 V 0.75 × V - - V IH CC CC V = 0.9 V to 1.95 V 0.70 × V - - V CC CC V = 2.3 V to 2.7 V 1.6 - - V CC V = 3.0 V to 3.6 V 2.0 - - V CC V LOW-level input voltage V = 0.8 V - - 0.25 × V V IL CC CC V = 0.9 V to 1.95 V - - 0.30 × V V CC CC V = 2.3 V to 2.7 V - - 0.7 V CC V = 3.0 V to 3.6 V - - 0.9 V CC V HIGH-level output voltage V = V or V OH I IH IL I = -20 μA; V = 0.8 V to 3.6 V V - 0.11 - - V O CC CC I = -1.1 mA; V = 1.1 V 0.6 × V - - V O CC CC I = -1.7 mA; V = 1.4 V 0.93 - - V O CC I = -1.9 mA; V = 1.65 V 1.17 - - V O CC I = -2.3 mA; V = 2.3 V 1.77 - - V O CC I = -3.1 mA; V = 2.3 V 1.67 - - V O CC I = -2.7 mA; V = 3.0 V 2.40 - - V O CC I = -4.0 mA; V = 3.0 V 2.30 - - V O CC V LOW-level output voltage V = V or V OL I IH IL I = 20 μA; V = 0.8 V to 3.6 V - - 0.11 V O CC I = 1.1 mA; V = 1.1 V - - 0.33 × V V O CC CC I = 1.7 mA; V = 1.4 V - - 0.41 V O CC I = 1.9 mA; V = 1.65 V - - 0.39 V O CC I = 2.3 mA; V = 2.3 V - - 0.36 V O CC I = 3.1 mA; V = 2.3 V - - 0.50 V O CC I = 2.7 mA; V = 3.0 V - - 0.36 V O CC I = 4.0 mA; V = 3.0 V - - 0.50 V O CC I input leakage current V = GND to 3.6 V; V = 0 V to 3.6 V - - ±0.75 μA I I CC I power-off leakage current V or V = 0 V to 3.6 V; V = 0 V - - ±0.75 μA OFF I O CC ΔI additional power-off V or V = 0 V to 3.6 V; - - ±0.75 μA OFF I O leakage current V = 0 V to 0.2 V CC I supply current V = GND or V ; I = 0 A; - - 1.4 μA CC I CC O V = 0.8 V to 3.6 V CC [1] ΔI additional supply current V = V - 0.6 V; I = 0 A; - - 75 μA CC I CC O V = 3.3 V; per pin CC [1] One input at VCC - 0.6 V, other input at VCC or GND. 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 9 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 11 Dynamic characteristics Table 9. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 10. Symbol Parameter Conditions T = 25 °C T = -40 °C to +125 °C Unit amb amb [1] Min Typ Max Min Max Min Max (85 °C) (125 °C) C = 5 pF L [2] t propagation CP to Q, Q; see Figure 8. pd delay V = 0.8 V - 25.4 - - - - - ns CC V = 1.1 V to 1.3 V 2.9 6.7 14.0 2.6 14.2 2.6 14.2 ns CC V = 1.4 V to 1.6 V 2.4 4.5 7.6 2.3 8.3 2.3 8.6 ns CC V = 1.65 V to 1.95 V 1.9 3.5 5.7 1.7 6.5 1.7 6.8 ns CC V = 2.3 V to 2.7 V 1.7 2.6 3.8 1.4 4.4 1.4 4.7 ns CC V = 3.0 V to 3.6 V 1.5 2.2 3.1 1.2 3.4 1.2 3.7 ns CC [2] SD to Q, Q; see Figure 9. V = 0.8 V - 19.6 - - - - - ns CC V = 1.1 V to 1.3 V 2.7 5.6 11.0 2.5 11.4 2.5 11.5 ns CC V = 1.4 V to 1.6 V 2.4 4.0 6.3 2.2 6.9 2.2 7.3 ns CC V = 1.65 V to 1.95 V 2.0 3.3 4.9 1.7 5.6 1.7 5.9 ns CC V = 2.3 V to 2.7 V 1.9 2.7 3.7 1.7 4.0 1.7 4.2 ns CC V = 3.0 V to 3.6 V 1.8 2.5 3.2 1.5 3.6 1.5 3.8 ns CC [2] RD to Q, Q; see Figure 9. V = 0.8 V - 19.2 - - - - - ns CC V = 1.1 V to 1.3 V 2.6 5.5 11.0 2.5 11.3 2.5 11.5 ns CC V = 1.4 V to 1.6 V 2.3 3.9 6.3 2.2 6.8 2.2 7.3 ns CC V = 1.65 V to 1.95 V 1.9 3.2 5.0 1.8 5.6 1.8 5.9 ns CC V = 2.3 V to 2.7 V 1.9 2.6 3.6 1.7 4.1 1.7 4.3 ns CC V = 3.0 V to 3.6 V 1.8 2.4 3.3 1.5 3.6 1.5 3.8 ns CC f maximum CP; see Figure 8. max frequency V = 0.8 V - 53 - - - - - MHz CC V = 1.1 V to 1.3 V - 203 - 170 - 170 - MHz CC V = 1.4 V to 1.6 V - 347 - 310 - 300 - MHz CC V = 1.65 V to 1.95 V - 435 - 400 - 390 - MHz CC V = 2.3 V to 2.7 V - 550 - 490 - 480 - MHz CC V = 3.0 V to 3.6 V - 619 - 550 - 510 - MHz CC 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 10 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger Symbol Parameter Conditions T = 25 °C T = -40 °C to +125 °C Unit amb amb [1] Min Typ Max Min Max Min Max (85 °C) (125 °C) C = 10 pF L [2] t propagation CP to Q, Q; see Figure 8. pd delay V = 0.8 V - 28.9 - - - - - ns CC V = 1.1 V to 1.3 V 3.1 7.5 15.8 2.9 16.1 2.9 16.1 ns CC V = 1.4 V to 1.6 V 2.7 5.1 8.7 2.4 9.4 2.4 9.8 ns CC V = 1.65 V to 1.95 V 2.5 4.1 6.5 2.2 7.2 2.2 7.6 ns CC V = 2.3 V to 2.7 V 2.0 3.2 4.6 1.8 5.3 1.8 5.6 ns CC V = 3.0 V to 3.6 V 1.8 2.8 3.8 1.6 4.1 1.6 4.4 ns CC [2] SD to Q, Q; see Figure 9. V = 0.8 V - 23.2 - - - - - ns CC V = 1.1 V to 1.3 V 2.9 6.5 12.9 2.8 13.3 2.8 13.5 ns CC V = 1.4 V to 1.6 V 2.7 4.6 7.5 2.3 7.9 2.3 8.3 ns CC V = 1.65 V to 1.95 V 2.6 3.9 5.6 2.3 6.3 2.3 6.6 ns CC V = 2.3 V to 2.7 V 2.3 3.2 4.4 2.0 4.8 2.0 5.2 ns CC V = 3.0 V to 3.6 V 2.2 3.0 3.9 1.9 4.2 1.9 4.4 ns CC [2] RD to Q, Q; see Figure 9. V = 0.8 V - 22.7 - - - - - ns CC V = 1.1 V to 1.3 V 2.8 6.4 12.8 2.7 13.2 2.7 13.4 ns CC V = 1.4 V to 1.6 V 2.6 4.5 7.5 2.3 8.1 2.3 8.4 ns CC V = 1.65 V to 1.95 V 2.5 3.3 5.8 2.3 6.3 2.3 6.7 ns CC V = 2.3 V to 2.7 V 2.2 3.2 4.4 2.0 4.9 2.0 5.2 ns CC V = 3.0 V to 3.6 V 2.0 2.9 4.0 1.9 4.3 1.9 4.5 ns CC f maximum CP; see Figure 8. max frequency V = 0.8 V - 52 - - - - - MHz CC V = 1.1 V to 1.3 V - 192 - 150 - 150 - MHz CC V = 1.4 V to 1.6 V - 324 - 280 - 230 - MHz CC V = 1.65 V to 1.95 V - 421 - 310 - 250 - MHz CC V = 2.3 V to 2.7 V - 486 - 370 - 360 - MHz CC V = 3.0 V to 3.6 V - 550 - 410 - 360 - MHz CC 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 11 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger Symbol Parameter Conditions T = 25 °C T = -40 °C to +125 °C Unit amb amb [1] Min Typ Max Min Max Min Max (85 °C) (125 °C) C = 15 pF L [2] t propagation CP to Q, Q; see Figure 8. pd delay V = 0.8 V - 32.4 - - - - - ns CC V = 1.1 V to 1.3 V 3.5 8.3 17.6 3.3 17.8 3.3 18.0 ns CC V = 1.4 V to 1.6 V 3.2 5.6 9.5 2.8 10.5 2.8 11.1 ns CC V = 1.65 V to 1.95 V 2.7 4.6 7.2 2.5 8.1 2.5 8.6 ns CC V = 2.3 V to 2.7 V 2.4 3.6 5.2 2.2 5.8 2.2 6.2 ns CC V = 3.0 V to 3.6 V 2.2 3.2 4.4 2.0 4.9 2.0 5.2 ns CC [2] SD to Q, Q; see Figure 9. V = 0.8 V - 26.7 - - - - - ns CC V = 1.1 V to 1.3 V 3.3 7.3 14.7 3.1 15.2 3.1 15.4 ns CC V = 1.4 V to 1.6 V 3.2 5.2 8.3 2.9 9.0 2.9 9.5 ns CC V = 1.65 V to 1.95 V 2.8 4.3 6.4 2.5 7.1 2.5 7.5 ns CC V = 2.3 V to 2.7 V 2.8 3.7 5.1 2.2 5.5 2.2 5.8 ns CC V = 3.0 V to 3.6 V 2.5 3.5 4.6 2.4 5.0 2.4 5.2 ns CC [2] RD to Q, Q; see Figure 9. V = 0.8 V - 26.1 - - - - - ns CC V = 1.1 V to 1.3 V 3.2 7.2 14.5 3.1 15.0 3.1 15.2 ns CC V = 1.4 V to 1.6 V 3.1 5.1 8.4 2.7 9.2 2.7 9.7 ns CC V = 1.65 V to 1.95 V 2.7 4.3 6.5 2.6 7.3 2.6 7.7 ns CC V = 2.3 V to 2.7 V 2.6 3.6 5.0 2.4 5.5 2.4 5.8 ns CC V = 3.0 V to 3.6 V 2.4 3.4 4.6 2.3 5.0 2.3 5.2 ns CC f maximum CP; see Figure 8. max frequency V = 0.8 V - 50 - - - - - MHz CC V = 1.1 V to 1.3 V - 181 - 120 - 120 - MHz CC V = 1.4 V to 1.6 V - 301 - 190 - 160 - MHz CC V = 1.65 V to 1.95 V - 407 - 240 - 190 - MHz CC V = 2.3 V to 2.7 V - 422 - 300 - 270 - MHz CC V = 3.0 V to 3.6 V - 481 - 320 - 300 - MHz CC 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 12 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger Symbol Parameter Conditions T = 25 °C T = -40 °C to +125 °C Unit amb amb [1] Min Typ Max Min Max Min Max (85 °C) (125 °C) C = 30 pF L [2] t propagation CP to Q, Q; see Figure 8. pd delay V = 0.8 V - 42.7 - - - - - ns CC V = 1.1 V to 1.3 V 4.2 10.6 22.5 4.0 23.0 4.0 23.3 ns CC V = 1.4 V to 1.6 V 3.7 7.2 12.0 3.7 13.3 3.7 14.0 ns CC V = 1.65 V to 1.95 V 3.5 5.8 9.2 3.4 10.4 3.4 11.0 ns CC V = 2.3 V to 2.7 V 3.3 4.7 6.6 3.0 7.3 3.0 7.8 ns CC V = 3.0 V to 3.6 V 3.0 4.3 5.8 2.8 6.8 2.8 7.3 ns CC [2] SD to Q, Q; see Figure 9. V = 0.8 V - 37.0 - - - - - ns CC V = 1.1 V to 1.3 V 4.0 9.5 19.8 3.8 20.8 3.8 21.1 ns CC V = 1.4 V to 1.6 V 3.8 6.7 10.9 3.7 12.0 3.7 12.7 ns CC V = 1.65 V to 1.95 V 3.7 5.6 8.4 3.5 9.3 3.5 9.9 ns CC V = 2.3 V to 2.7 V 3.7 4.8 6.6 3.2 7.2 3.2 7.6 ns CC V = 3.0 V to 3.6 V 3.4 4.6 6.0 3.1 6.8 3.1 7.1 ns CC [2] RD to Q, Q; see Figure 9. V = 0.8 V - 36.4 - - - - - ns CC V = 1.1 V to 1.3 V 3.9 9.4 19.5 3.8 20.2 3.8 20.5 ns CC V = 1.4 V to 1.6 V 3.6 6.6 10.9 3.7 12.0 3.7 12.6 ns CC V = 1.65 V to 1.95 V 3.5 5.5 8.5 3.5 9.5 3.5 10.1 ns CC V = 2.3 V to 2.7 V 3.5 4.7 6.5 3.2 7.1 3.2 7.6 ns CC V = 3.0 V to 3.6 V 3.3 4.4 6.1 3.1 7.1 3.1 7.5 ns CC f maximum CP; see Figure 8. max frequency V = 0.8 V - 28 - - - - - MHz CC V = 1.1 V to 1.3 V - 145 - 70 - 70 - MHz CC V = 1.4 V to 1.6 V - 185 - 120 - 110 - MHz CC V = 1.65 V to 1.95 V - 270 - 150 - 120 - MHz CC V = 2.3 V to 2.7 V - 290 - 190 - 170 - MHz CC V = 3.0 V to 3.6 V - 315 - 200 - 190 - MHz CC 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 13 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger Symbol Parameter Conditions T = 25 °C T = -40 °C to +125 °C Unit amb amb [1] Min Typ Max Min Max Min Max (85 °C) (125 °C) C = 5 pF, 10 pF, 15 pF and 30 pF L t set-up time D to CP HIGH; see su Figure 8. V = 0.8 V - 3.4 - - - - - ns CC V = 1.1 V to 1.3 V - 0.6 - 1.2 - 1.2 - ns CC V = 1.4 V to 1.6 V - 0.3 - 0.6 - 0.6 - ns CC V = 1.65 V to 1.95 V - 0.4 - 0.5 - 0.5 - ns CC V = 2.3 V to 2.7 V - 0.2 - 0.4 - 0.4 - ns CC V = 3.0 V to 3.6 V - 0.3 - 0.4 - 0.4 - ns CC D to CP LOW; see Figure 8. V = 0.8 V - 3.0 - - - - - ns CC V = 1.1 V to 1.3 V - 0.5 - 1.2 - 1.2 - ns CC V = 1.4 V to 1.6 V - 0.3 - 0.7 - 0.7 - ns CC V = 1.65 V to 1.95 V - 0.4 - 0.7 - 0.7 - ns CC V = 2.3 V to 2.7 V - 0.5 - 0.7 - 0.7 - ns CC V = 3.0 V to 3.6 V - 0.6 - 0.8 - 0.8 - ns CC t hold time D to CP; see Figure 8. h V = 0.8 V - -1.9 - - - - - ns CC V = 1.1 V to 1.3 V - -0.3 - 0.5 - 0.5 - ns CC V = 1.4 V to 1.6 V - -0.2 - 0.2 - 0.2 - ns CC V = 1.65 V to 1.95 V - -0.2 - 0.1 - 0.1 - ns CC V = 2.3 V to 2.7 V - -0.2 - 0.1 - 0.1 - ns CC V = 3.0 V to 3.6 V - -0.2 - 0.1 - 0.1 - ns CC t recovery RD; see Figure 9 rec time V = 1.1 V to 1.3 V - -0.5 - -0.9 - -0.9 - ns CC V = 1.4 V to 1.6 V - -0.2 - -0.6 - -0.6 - ns CC V = 1.65 V to 1.95 V - -0.2 - -0.4 - -0.4 - ns CC V = 2.3 V to 2.7 V - -0.1 - -0.1 - -0.1 - ns CC V = 3.0 V to 3.6 V - -0.1 - -0.1 - -0.1 - ns CC SD; see Figure 9. V = 1.1 V to 1.3 V - -0.5 - -0.3 - -0.3 - ns CC V = 1.4 V to 1.6 V - -0.4 - -0.1 - -0.1 - ns CC V = 1.65 V to 1.95 V - -0.3 - 0 - 0 - ns CC V = 2.3 V to 2.7 V - -0.2 - 0.1 - 0.1 - ns CC V = 3.0 V to 3.6 V - -0.1 - 0.1 - 0.1 - ns CC 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 14 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger Symbol Parameter Conditions T = 25 °C T = -40 °C to +125 °C Unit amb amb [1] Min Typ Max Min Max Min Max (85 °C) (125 °C) t pulse width CP HIGH or LOW; W see Figure 8. V = 1.1 V to 1.3 V - 2.1 - 2.7 - 2.7 - ns CC V = 1.4 V to 1.6 V - 1.1 - 1.5 - 1.5 - ns CC V = 1.65 V to 1.95 V - 0.9 - 1.6 - 1.6 - ns CC V = 2.3 V to 2.7 V - 0.6 - 1.7 - 1.7 - ns CC V = 3.0 V to 3.6 V - 0.6 - 1.9 - 1.9 - ns CC SD or RD LOW; see Figure 9. V = 1.1 V to 1.3 V - 4.2 - 11.3 - 11.5 - ns CC V = 1.4 V to 1.6 V - 2.3 - 6.2 - 6.4 - ns CC V = 1.65 V to 1.95 V - 1.8 - 4.8 - 5.0 - ns CC V = 2.3 V to 2.7 V - 1.2 - 3.3 - 3.5 - ns CC V = 3.0 V to 3.6 V - 1.1 - 2.6 - 2.8 - ns CC [3] C power f = 1 MHz; PD i dissipation V = GND to V I CC capacitance V = 0.8 V - 2.8 - - - - - pF CC V = 1.1 V to 1.3 V - 2.9 - - - - - pF CC V = 1.4 V to 1.6 V - 3.0 - - - - - pF CC V = 1.65 V to 1.95 V - 3.0 - - - - - pF CC V = 2.3 V to 2.7 V - 3.5 - - - - - pF CC V = 3.0 V to 3.6 V - 3.9 - - - - - pF CC [1] All typical values are measured at nominal VCC. [2] tpd is the same as tPLH and tPHL. [3] CPD is used to determine the dynamic power dissipation (PD in μW). PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; Σ(CL × VCC2 × fo) = sum of outputs. 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 15 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 11.1 Waveforms and test circuit tW VI CPinput VM GND 1/fmax VI Dinput VM GND th th tsu tsu tPHL tPLH VOH Qoutput VM VOL VOH Qoutput VM VOL tPLH tPHL 001aae365 Measurement points are given in Table 10. The shaded areas indicate when the input is permitted to change for predictable output performance. V and V are typical output voltage levels that occur with the output load. OL OH Figure 8. The clock input (CP) to output (Q, Q) propagation delays, the data input (D) to clock input (CP) set-up and hold times and the clock input (CP) pulse width and maximum frequency 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 16 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger VI CPinput VM GND trec VI SDinput VM GND trec tW tW VI RDinput VM GND tPLH tPHL VOH Qoutput VM VOL VOH Qoutput VM VOL tPHL tPLH 001aae366 Measurement points are given in Table 10. V and V are typical output voltage levels that occur with the output load. OL OH Figure 9. The set input (SD) and reset input (RD) to output (Q, Q) propagation delays, the set input (SD) and reset input (RD) pulse widths and the reset input (RD) to clock input (CP) recovery time Table 10. Measurement points Supply voltage Output Input V V V V t = t CC M M I r f 0.8 V to 3.6 V 0.5 × V 0.5 × V V ≤ 3.0 ns CC CC CC 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 17 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger VCC VEXT 5kΩ VI VO G DUT RT CL RL 001aac521 Test data is given in Table 11. Definitions for test circuit: R = Load resistance. L C = Load capacitance including jig and probe capacitance. L R = Termination resistance should be equal to the output impedance Zo of the pulse generator. T V = External voltage for measuring switching times. EXT Figure 10. Test circuit for measuring switching times Table 11. Test data Supply voltage Load V EXT [1] V C R t , t t , t t , t CC L L PLH PHL PZH PHZ PZL PLZ 0.8 V to 3.6 V 5 pF, 10 pF, 15 pF and 30 pF 5 kΩ or 1 MΩ open GND 2 × V CC [1] For measuring enable and disable times RL = 5 kΩ For measuring propagation delays, setup and hold times and pulse width RL = 1 MΩ. 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 18 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 12 Package outline VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 D E A X c y HE v A Z 8 5 Q A2 A pin 1 index A1 (A3) θ Lp 1 4 detail X L e w bp 0 5 mm scale Dimensions (mm are the original dimensions) A Unit max. A1 A2 A3 bp c D(1) E(2) e HE L Lp Q v w y Z(1) θ max 0.15 0.85 0.27 0.23 2.1 2.4 3.2 0.40 0.21 0.4 8° mm nom 1 0.12 0.5 0.4 0.2 0.08 0.1 min 0.00 0.60 0.17 0.08 1.9 2.2 3.0 0.15 0.19 0.1 0° Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. sot765-1_po Outline References European Issue date version IEC JEDEC JEITA projection 07-06-02 SOT765-1 MO-187 16-05-31 Figure 11. Package outline SOT765-1 (VSSOP8) 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 19 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger XSON8:plasticextremelythinsmalloutlinepackage;noleads;8terminals;body1x1.95x0.5mm SOT833-1 b 1 2 3 4 4× L1 L (2) e 8 7 6 5 e1 e1 e1 8× A (2) A1 D E terminal1 indexarea 0 1 2mm scale DIMENSIONS(mmaretheoriginaldimensions) UNIT mA(a1x) mAa1x b D E e e1 L L1 0.25 2.0 1.05 0.35 0.40 mm 0.5 0.04 0.6 0.5 0.17 1.9 0.95 0.27 0.32 Notes 1.Includingplatingthickness. 2.Canbevisibleinsomemanufacturingprocesses. OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION 07-11-14 SOT833-1 --- MO-252 --- 07-12-07 Figure 12. Package outline SOT833-1 (XSON8) 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 20 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger XSON8:extremelythinsmalloutlinepackage;noleads; 8terminals;body1.35x1x0.5mm SOT1089 E terminal1 indexarea D A A1 detailX (4×)(2) e L (8×)(2) b 4 5 e1 1 8 terminal1 indexarea L1 X 0 0.5 1mm scale Dimensions Unit A(1) A1 b D E e e1 L L1 max 0.5 0.04 0.20 1.40 1.05 0.35 0.40 mm nom 0.15 1.35 1.00 0.55 0.35 0.30 0.35 min 0.12 1.30 0.95 0.27 0.32 Note 1.Includingplatingthickness. 2.Visibledependinguponusedmanufacturingtechnology. sot1089_po Outline References European Issuedate version IEC JEDEC JEITA projection 10-04-09 SOT1089 MO-252 10-04-12 Figure 13. Package outline SOT1089 (XSON8) 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 21 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger XQFN8: plastic, extremely thin quad flat package; no leads; 8 terminals; body 1.6 x 1.6 x 0.5 mm SOT902-2 X D B A terminal 1 index area E A A1 detail X e C v C A B b w C y1C y 4 3 5 e1 terminal 1 index area 2 6 k L 1 7 8 metal area L2 not for soldering L k L3 L1 0 1 2 mm scale Dimensions Unit(1) A A1 b D E e e1 k L L1 L2 L3 v w y y1 max 0.5 0.05 0.25 1.65 1.65 0.35 0.15 0.25 0.35 mm nom 0.20 1.60 1.60 0.55 0.5 0.30 0.10 0.20 0.30 0.1 0.05 0.05 0.05 min 0.00 0.15 1.55 1.55 0.2 0.25 0.05 0.15 0.25 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. sot902-2_po Outline References European Issue date version IEC JEDEC JEITA projection 16-07-14 SOT902-2 - - - MO-255 - - - 16-11-08 Figure 14. Package outline SOT902-2 (XQFN8) 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 22 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger XSON8:extremelythinsmalloutlinepackage;noleads; 8terminals;body1.2x1.0x0.35mm SOT1116 b 1 2 3 4 (4×)(2) L1 L e 8 7 6 5 e1 e1 e1 (8×)(2) A1 A D E terminal1 indexarea 0 0.5 1mm scale Dimensions Unit A(1) A1 b D E e e1 L L1 max 0.35 0.04 0.20 1.25 1.05 0.35 0.40 mm nom 0.15 1.20 1.00 0.55 0.3 0.30 0.35 min 0.12 1.15 0.95 0.27 0.32 Note 1.Includingplatingthickness. 2.Visibledependinguponusedmanufacturingtechnology. sot1116_po Outline References European Issuedate version IEC JEDEC JEITA projection 10-04-02 SOT1116 10-04-07 Figure 15. Package outline SOT1116 (XSON8) 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 23 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger XSON8:extremelythinsmalloutlinepackage;noleads; 8terminals;body1.35x1.0x0.35mm SOT1203 b 1 2 3 4 (4×)(2) L1 L e 8 7 6 5 e1 e1 e1 (8×)(2) A1 A D E terminal1 indexarea 0 0.5 1mm scale Dimensions Unit A(1) A1 b D E e e1 L L1 max 0.35 0.04 0.20 1.40 1.05 0.35 0.40 mm nom 0.15 1.35 1.00 0.55 0.35 0.30 0.35 min 0.12 1.30 0.95 0.27 0.32 Note 1.Includingplatingthickness. 2.Visibledependinguponusedmanufacturingtechnology. sot1203_po Outline References European Issuedate version IEC JEDEC JEITA projection 10-04-02 SOT1203 10-04-06 Figure 16. Package outline SOT1203 (XSON8) 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 24 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger X2SON8: plastic thermal enhanced extremely thin small outline package; no leads; 8 terminals; body 1.35 x 0.8 x 0.35 mm SOT1233 X A D B A E A1 detail X pin 1 index area e e C v C A B b y 1 2 (6x) 3 w C pin 1 index area 8 4 Dh L (6x) 7 6 5 (2bx1) y1C e1 0 1 mm scale Dimensions (mm are the original dimensions) Unit A A1 b b1 D Dh E e e1 L v w y y1 max 0.35 0.04 0.25 1.40 0.27 0.85 0.27 mm nom 0.32 0.20 0.15 1.35 0.22 0.80 0.5 0.54 0.22 0.1 0.05 0.05 0.05 min 0.30 0.00 0.15 (ref) 1.30 0.17 0.75 0.17 sot1233_po Outline References European Issue date version IEC JEDEC JEITA projection 16-04-21 SOT1233 --- 17-01-05 Figure 17. Package outline SOT1233 (X2SON8) 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 25 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 13 Abbreviations Table 12. Abbreviations Acronym Description CDM Charged Device Model DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model 14 Revision history Table 13. Revision history Document ID Release date Data sheet status Change notice Supersedes 74AUP1G74 v.11 20170703 Product data sheet - 74AUP1G74 v.10 Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. • Legal texts have been adapted to the new company name where appropriate. • Figure 7 and Figure 17 (drawings SOT1233/X2SON8) updated • Type number 74AUP1G74GD removed. 74AUP1G74 v.10 20161028 Product data sheet - 74AUP1G74 v.9 Modifications: • Added type number 74AUP1G74GX (SOT1233/X2SON8) 74AUP1G74 v.9 20140106 Product data sheet - 74AUP1G74 v.8 Modifications: • Conditions for fmax corrected (errata). 74AUP1G74 v.8 20130123 Product data sheet - 74AUP1G74 v.7 Modifications: • For type number 74AUP1G74GD XSON8U has changed to XSON8. 74AUP1G74 v.7 20120522 Product data sheet - 74AUP1G74 v.6 74AUP1G74 v.6 20111128 Product data sheet - 74AUP1G74 v.5 74AUP1G74 v.5 20100726 Product data sheet - 74AUP1G74 v.4 74AUP1G74 v.4 20080603 Product data sheet - 74AUP1G74 v.3 74AUP1G74 v.3 20080207 Product data sheet - 74AUP1G74 v.2 74AUP1G74 v.2 20070515 Product data sheet - 74AUP1G74 v.1 74AUP1G74 v.1 20060825 Product data sheet - - 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 26 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger 15 Legal information 15.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. systems or equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal 15.2 Definitions injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in Draft — The document is a draft version only. The content is still under such equipment or applications and therefore such inclusion and/or use is at internal review and subject to formal approval, which may result in the customer’s own risk. modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein Applications — Applications that are described herein for any of these and shall have no liability for the consequences of use of such information. products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use Short data sheet — A short data sheet is an extract from a full data sheet without further testing or modification. Customers are responsible for the with the same product type number(s) and title. A short data sheet is design and operation of their applications and products using Nexperia intended for quick reference only and should not be relied upon to contain products, and Nexperia accepts no liability for any assistance with detailed and full information. For detailed and full information see the applications or customer product design. It is customer’s sole responsibility relevant full data sheet, which is available on request via the local Nexperia to determine whether the Nexperia product is suitable and fit for the sales office. In case of any inconsistency or conflict with the short data sheet, customer’s applications and products planned, as well as for the planned the full data sheet shall prevail. application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks Product specification — The information and data provided in a Product associated with their applications and products. Nexperia does not accept data sheet shall define the specification of the product as agreed between any liability related to any default, damage, costs or problem which is based Nexperia and its customer, unless Nexperia and customer have explicitly on any weakness or default in the customer’s applications or products, or agreed otherwise in writing. In no event however, shall an agreement be the application or use by customer’s third party customer(s). Customer is valid in which the Nexperia product is deemed to offer functions and qualities responsible for doing all necessary testing for the customer’s applications beyond those described in the Product data sheet. and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. 15.3 Disclaimers Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent Limited warranty and liability — Information in this document is believed damage to the device. Limiting values are stress ratings only and (proper) to be accurate and reliable. However, Nexperia does not give any operation of the device at these or any other conditions above those representations or warranties, expressed or implied, as to the accuracy given in the Recommended operating conditions section (if present) or the or completeness of such information and shall have no liability for the Characteristics sections of this document is not warranted. Constant or consequences of use of such information. Nexperia takes no responsibility repeated exposure to limiting values will permanently and irreversibly affect for the content in this document if provided by an information source outside the quality and reliability of the device. of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal Terms and conditions of commercial sale — Nexperia products are or replacement of any products or rework charges) whether or not such sold subject to the general terms and conditions of commercial sale, as damages are based on tort (including negligence), warranty, breach of published at http://www.nexperia.com/profile/terms, unless otherwise agreed contract or any other legal theory. Notwithstanding any damages that in a valid written individual agreement. In case an individual agreement is customer might incur for any reason whatsoever, Nexperia's aggregate and concluded only the terms and conditions of the respective agreement shall cumulative liability towards customer for the products described herein shall apply. Nexperia hereby expressly objects to applying the customer’s general be limited in accordance with the Terms and conditions of commercial sale of terms and conditions with regard to the purchase of Nexperia products by Nexperia. customer. Right to make changes — Nexperia reserves the right to make changes No offer to sell or license — Nothing in this document may be interpreted to information published in this document, including without limitation or construed as an offer to sell products that is open for acceptance or specifications and product descriptions, at any time and without notice. This the grant, conveyance or implication of any license under any copyrights, document supersedes and replaces all information supplied prior to the patents or other industrial or intellectual property rights. publication hereof. Export control — This document as well as the item(s) described herein Suitability for use — Nexperia products are not designed, authorized or may be subject to export control regulations. Export might require a prior warranted to be suitable for use in life support, life-critical or safety-critical authorization from competent authorities. 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 27 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger Non-automotive qualified products — Unless this data sheet expressly design and use of the product for automotive applications beyond Nexperia's states that this specific Nexperia product is automotive qualified, the standard warranty and Nexperia's product specifications. product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia Translations — A non-English (translated) version of a document is for accepts no liability for inclusion and/or use of non-automotive qualified reference only. The English version shall prevail in case of any discrepancy products in automotive equipment or applications. In the event that customer between the translated and English versions. uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia's warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for 15.4 Trademarks automotive applications beyond Nexperia's specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia Notice: All referenced brands, product names, service names and for any liability, damages or failed product claims resulting from customer trademarks are the property of their respective owners. 74AUP1G74 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved. Product data sheet Rev. 11 — 3 July 2017 28 / 29

Nexperia 74AUP1G74 Low-power D-type flip-flop with set and reset; positive-edge trigger Contents 1 General description ............................................1 2 Features and benefits .........................................1 3 Ordering information ..........................................2 4 Marking .................................................................2 5 Functional diagram .............................................3 6 Pinning information ............................................4 6.1 Pinning ...............................................................4 6.2 Pin description ...................................................5 7 Functional description ........................................5 8 Limiting values ....................................................6 9 Recommended operating conditions ................6 10 Static characteristics ..........................................7 11 Dynamic characteristics ...................................10 11.1 Waveforms and test circuit ..............................16 12 Package outline .................................................19 13 Abbreviations ....................................................26 14 Revision history ................................................26 15 Legal information ..............................................27 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section 'Legal information'. © Nexperia B.V. 2017. All rights reserved. For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 3 July 2017 Document identifier: 74AUP1G74