74AUP1G04 Low power single inverter gate Features ■ High speed: t = 4.3ns (max.) at V = 2.3V PD CC ■ Power down protection on inputs and outputs ) s ■ Balanced propagation delays: ( tPLH ≈ tPHL ct u ■ Operating voltage range: DFN6L d VCC (opr) = 1.2 to 3.6 V o r ■ Low power dissipation: P ICC = 1µA (max.) at TA = 85 °C e ■ Latch-up performance exceeds 300mA (JESD t e 78, Class II) l o ■ ESD performance: s b – 2000-V Human-Body Model (A114-A) SOT-665 O – 200-V Machine Model (A115-A) - – 1000-V Charged-Device Model (C101) ) s ( Applications t c u Description ■ Mobile phones d o ■ Personal digital assirstants (PDAs) The 74AUP1G04 is a low voltage CMOS single P inverter gate fabricated with sub-micron silicon e gate and double-layer metal wiring C2MOS t e technology. It is ideal for 1.2 to 3.6 V operations ol and low power and low noise applications. s b All inputs and outputs are equipped with O protection circuits against static discharge, giving them 2kV ESD immunity and transient excess voltage. Table 1. Device summary Order code Package Packing 74AUPG04DTR DFN6L (1.2 x 1 mm) Tape and reel 74AUPG04GTR SOT-665 (1.6 x 1.6 mm) Tape and reel March 2008 Rev 1 1/18 www.st.com 18

Pin settings 74AUP1G04 1 Pin settings 1.1 Pin connection Figure 1. Pin connection (top through view) NC 1 6 VCC NC 1 5 VCC ) s A 2 5 NC A 2 t( c u GND 3 4 B GND 3 d 4 B o r P DFN6L SOT-665 e t e CS00092 l o s b 1.2 Pin description O - T able 2. Pin assignment ) s DFN pin SOT pin ( t Symbol Name and function number numbecr u 1 d 1 NC Not connected o 2 r 2 A Data input P 3 3 GND Ground (0V) e e t 4 4 B Data output l o 5 - NC Not connected s b 6 5 V Positive supply voltage CC O 2/18

74AUP1G04 Pin settings 1.3 Truth table Figure 2. Truth table A B ) s T able 3. Truth table ( t c A B u d L H o r H P L e Figure 3. Input and output equivalent circuit t e VCC ol s b O Overvoltage control - Input Output ) s ( t ESD c ESD protection u protection d o r P GND GND GND GND GND e t e l o CS08974 s b O 3/18

Maximum rating 74AUP1G04 2 Maximum rating Stressing the device above the rating listed in the “absolute maximum ratings” table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. Table 4. Absolute maximum ratings Symbol Parameter Value )Unit s ( V Supply voltage -0.5 to +t4.6 V CC c u V DC input voltage -0.5 to +4.6 V I d V DC output voltage (V = 0V) o -0.5 to +4.6 V O CC r P V DC output voltage (high or low state) -0.5 to V + 0.5 V O CC e I DC input diode current -20 mA IK t e IOK DC output diode current ol -50 mA I DC output current s ±50 mA O b I DC supply current per supply pOin ±100 mA CC IGND DC ground current per su-pply pin ±100 mA ) P Power dissipation s 200 mW D ( Tstg Storage temcpterature -65 to +150 °C u T Lead temperature (10 sec) 260 °C L d o r P 2.1 Rec ommended operating conditions e t e l T able 5. Recommended operating conditions o s Symbol Parameter Value Unit b O V Supply voltage 1.2 to 3.6 V CC V Input voltage 0 to V V I CC V Output voltage 0 to V V O CC T Operating temperature -40 to 85 °C op V = 3.0 to 3.6V 10 ns/V CC dt/dv Input rise and fall time V = 2.3 to 2.7V 20 ns/V CC V = 1.2 to 1.95V 100 ns/V CC 4/18

74AUP1G04 Electrical characteristics 3 Electrical characteristics Table 6. D C specifications Value Value V Symbol Parameter CC Test condition 25 °C -40 to 85 °C Unit (V) Min Max Min Max 1.2 to 1.95 0.65V 0.65V CC CC High level input V 2.0 to 2.7 1.6 1.6 V IH voltage ) s 2.75 to 3.6 2.0 2.0 ( t 1.2 to 1.95 0.35 V 0.3c5V CC u CC Low level input V 2.0 to 2.7 0.7 d 0.7 V IL voltage o 2.75 to 3.6 0.8 r 0.8 P V V 1.2 to 3.6 I = -100 µA CC – e CC – OH 0.2 0.2 t e 3.0 IOH = -10 mA 2.o4l5 2.4 VOH Houigtphu lte vvoellt age 2.3 IOH = -6 mA b s1.85 1.8 V 1.65 I = -4 mA O 1.30 1.25 OH 1.4 I = -2- mA 1.10 1.05 OH ) 1.2 I s = -1 mA 1.00 0.95 OH ( t 1.2 to 3c.6 IO = 100µA 0.15 0.20 u d 3.0 IO = 10mA 0.50 0.55 o Low level r 2.3 IO = 6mA 0.35 0.40 VOL output voltaP ge 1.65 I = 4mA 0.35 0.40 V O e t 1.4 IO = 2mA 0.25 0.30 e l 1.2 I = 1mA 0.20 0.25 o O s Input leakage b I 0 to 3.6 V = GND to 3.6 ±0.1 ±0.5 µA I current I O Power off V or V = 0 to I 0 I O ±0.1 ±1.0 µA off leakage current 3.6V Quiescent I 1.2 to 3.6 V = V or GND 0.1 1 µA CC supply current I CC ΔI ICC increment 3.3 VI = VCC - 0.6V, 80 100 µA CC per input I = 0 O 5/18

Electrical characteristics 74AUP1G04 Table 7. A C electrical characteristics Test Value condition V Symbol Parameter CC Unit (V) 25 °C -40 to 85 °C C (pF) L Typ Min Max 1.1 to 1.3 8.0 12.4 1.4 to 1.6 4.2 6.6 1.65 to 1.95 5 3.2 5.1 2.3 to 2.7 2.3 3.1 ) s 3.0 to 3.6 1.9 2.5 ( t c 1.1 to 1.3 8.6 u13 d 1.4 to 1.6 4.6 o 7 r 1.65 to 1.95 10 3.5 P 5.3 2.3 to 2.7 2.4 e 3.5 t Propagation 3.0 to 3.6 e2.0 2.9 tPLH, tPHL delay time ol ns 1.1 to 1.3 9.1 13.3 s b 1.4 to 1.6 5.6 7.5 O 1.65 to 1.95 15 3.8 5.7 - 2.3 to 2.7) 2.6 3.7 s ( 3.t0 to 3.6 2.2 3.1 c u 1.1 to 1.3 10.5 16 d o 1.4 to 1.6 5.5 9 r P 1.65 to 1.95 30 4.3 6.7 e 2.3 to 2.7 3.1 4.3 t e 3.0 to 3.6 2.7 3.8 l o s b O Table 8. Capacitive characteristics Value Symbol Parameter VCC Test T = 25 °C Unit (V) condition A Min Typ Max 0 V = 0 or V 3 I CC C Input capacitance pF I 3.6 V = 0 or V 6 I CC C Output capacitance 3.6 V = 0 or V 6 pF O I CC C Power dissipation capacitance 3.6 f = 10 MHz 32 pF PD 6/18

74AUP1G04 Test circuit 4 Test circuit Figure 4. Test circuit Open Pulse DUT generator ) s ( t c u d o r P SC11691 e t Table 9. Test setting e l o Test Switch s b tPLH, tPHL O Open - T able 10. Symbol and value s for test circuit and waveform ) s ( VCC t Symbol c 1.2 ± 0.1u V 1.5 ± 0.1V 1.8 ± 0.15V 2.5 ± 0.2V 3.3 ± 0.3V d C 5, 1o0, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF L r R P 500Ω 500Ω 500Ω 500Ω 500 Ω L eV V /2 V /2 V /2 V /2 1.5 M CC CC CC CC t e V V V V V V l IH CC CC CC CC CC o s t = t ≤2 ns ≤ 2 ns ≤ 2 ns ≤ 2 ns ≤ 2 ns r f b O R = Z of pulse generator (typically 50Ω) T OUT 7/18

Test circuit 74AUP1G04 Figure 5. Waveform: propagation delay (f = 1 MHz; 50% duty cycle) t t r f V IH 90% A V V M M 10% GND t t PLH PHL VOH ) s ( t B V V c M M u d o V OL r P e t e l o s b O - ) s ( t c u d o r P e t e l o s b O 8/18

74AUP1G04 Package mechanical data 5 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. Figure 6. DFN6L (1.2 x 1 mm) package outline ) s ( t c u d o r P e t e l o s b O - ) s ( t c u d o r P e t e l o s b O 7899067 9/18

Package mechanical data 74AUP1G04 Table 11. DFN6L (1.2 x 1 mm) package mechanical data Millimeters Symbol Typ Min Max A 0.50 0.45 0.55 A1 0.02 0 0.05 A3 0.127 b 0.20 0.15 0.25 D 1.20 1.15 1.25 ) s E 1 0.95 1.0(5 t c e 0.40 u d L 0.35 0.30 0.40 o L1 0.45 0.40 r 0.50 P Figure 7. DFN6L (1.2 x 1mm) package footprint e t e l o s b O - ) s ( t c u d o r P e t e l o s b O 10/18

74AUP1G04 Package mechanical data Figure 8. SOT-665 (1.6 x 1.6mm) package outline bp ) D E s ( t c u d A o r P Lp He e C t e l o s b O - ) s ( t c e1 u e d o r P T able 12. SOT665 (1.6 x 1.6mm) mechanical data e t e Symbol Millimeters l o s Typ Min Max b O A 0.50 0.60 bp 0.17 0.27 c 0.08 0.18 D 1.5 1.7 E 1.1 1.3 e 1 e1 0.5 He 1.5 1.7 Lp 0.1 0.3 11/18

Package mechanical data 74AUP1G04 Figure 9. SOT-665 (1.6 x 1.6mm) package footprint ) s ( t c u d o r P e t e l o Figure 10. DFN6L (1.2 x 1mm) carrier tape information s b O - ) s ( t c u d o r P e t e l o s b O 7875978 12/18

74AUP1G04 Package mechanical data Figure 11. DFN6L (1.2 x 1mm) reel information drawing (back view) ) s ( t c u d o r P e t e l o s b O - ) s ( t c u d o r P e t e l o s b O 13/18

Package mechanical data 74AUP1G04 Figure 12. DFN6L (1.2 x 1mm) reel information drawing (front view) ) s ( t c u d o r P e t e l o s b O - ) s ( t c u d o r P e t e l o s b O 14/18

74AUP1G04 Package mechanical data Figure 13. SOT-665 (1.6 x 1.6mm) carrier tape information ) s ( t c u d o r P e t e l o s b O - ) s ( t c u d o Figure 14. SOT-665 (1.6 x 1.6mm) reel information r P e t e l o s b O 15/18

Package mechanical data 74AUP1G04 T able 13. SOT-665 (1.6x1.6mm) reel description eint Value(1) R1 R2 R3 e1 W1 W2 W3 (at hub) Min 12.8 175 59.5 8.4 1.5 8.4 7.9 Typ 13 180 60 8.4 8.4 9.4 Max 13.2 185 60.5 10 10 14.4 10.9 1. Millimeters. ) s ( t c u d o r P e t e l o s b O - ) s ( t c u d o r P e t e l o s b O 16/18

74AUP1G04 Revision history 6 Revision history T able 14. Document revision history Date Revision Changes 28-Mar-2008 1 Initial release. ) s ( t c u d o r P e t e l o s b O - ) s ( t c u d o r P e t e l o s b O 17/18

74AUP1G04 ) s Please Read Carefully: ( t c u Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subdsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and soervices described herein at any time, without notice. r P All ST products are sold pursuant to ST’s terms and conditions of sale. e Purchasers are solely responsible for the choice, selection and use of the ST products andt services described herein, and ST assumes no e liability whatsoever relating to the choice, selection or use of the ST products and services described herein. l o No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this s document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products b or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such O third party products or services or any intellectual property contained therein. - ) UNLESS OTHERWISE SET FORTH IN ST’S TERMSs AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AN(D/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED t WARRANTIES OF MERCHANTABILITY, FITNcESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMuENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. d UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT o RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING r APPLICATIONS, NOR IN PPRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE P ROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLYe BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void s any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any b liability of ST. O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18