7000 Series Miniature Toggle Switches Features/Benefits Typical Applications • M ulti-pole and multi-position • Telecommunications • W ide variety of actuator and • Instrumentation termination options • Medical equipment • E poxy terminal-seal compatible with bottom wash cleaning • RoHS complaint models available Specifications DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC; SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E 2 AMPS @ 250 V AC. See page F-15 for additional ratings. method 9 (1 hour steam aging). ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break For materials see page F-4. cycles at full load. All other models: 40,000 cycles. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, NOTE: Any models supplied with P, S R, Q, B or G contact material are RoHS compliant 100 mA, for both silver and gold plated contacts. and compatible. INSULATION RESISTANCE: 109 Ω min. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F–4 thru F–16. For additional options not shown in catalog, consult our Customer Service Center. Bushing Switch Function D .280 high, keyway 7101 SP On-None-On Actuator Contact Material H .296 high, flat 7103 SP On-Off-On M .200” high Y .350 high, keyway B Gold Seal 7105 SP Mom.-Off-Mom. P3 Flatted, anti-rotation, NONE No bushing P Gold, matte-tin E Epoxy 7107 SP On-Off-Mom. .450” high choice required Q Silver I E poxy potted 7108 SP On-None-Mom. S .420” high CW Splashproof S Silver, matte-tin base 7109 SP None-On-Mom. T .687” high, 15/32 bushing D8 .280” high, flat G Gold over silver 7201 DP On-None-On K2 Locking lever, .704” high D9 .280” high, keyway R Gold over silver, matte-tin 7203 DP On-Off-On K9 Locking lever, .704” high H3 .315” high, keyway 7205 DP Mom.-Off-Mom. K12 Locking lever, .732” high H4 8mm high, keyway 7207 DP On-Off-Mom. K19 Locking lever, .732” high 7208 DP On-None-Mom. L .840” high Y1 .378” high, keyway Actuator Color/Finish 7211 DP On-On-On L1 .640” high Y3 8.9mm high, keyway NONE Bright chrome 7213 DP On-On-Mom. L1P Anti-rotation, .640” high Y4 .378” high, flat 2 Black 7215 DP Mom.-On-Mom. L2 .550” high Y9 .350” high, keyway 3 Red 7301 3P On-None-On L2P Anti-rotation, .550” high Terminations S Satin chrome 7303 3P On-Off-On L3 Plastic .940” inch A Right angle, PC thru-hole KXX Actuator Color/Finish 7305 3P Mom.-Off-Mom. L40 Lever handle without cap AV2 Vert. right angle, PC thru-hole NONE Natural aluminum 7308 3P On-None-Mom. L41 .531” high lever handle with cap C PC Thru-hole 2 Black anodized aluminum 7401 4P On-None-On L42 .838” high lever handle with cap V3 .460 high, V-bracket 3 Red anodized aluminum 7403 4P On-Off-On MP Anti-rotation, .200” high Z Solder lug 7 Blue anodized aluminum 7405 4P Mom.-Off-Mom. P1 Flatted, anti-rotation, A2 Right angle, PC thru-hole 7408 4P On-None-Mom. .840” high A3 Right angle, PC thru-hole 7411 4P On-On-On P4 Flatted, anti-rotation, A4 Right angle, PC thru-hole 7413 4P On-On-Mom. .250” high AW1 Right angle, extended, PC thru-hole Bushing Finish 7415 4P Mom.-On-Mom. SP Anti-rotation, .420” high AW4 Right angle, extended, PC thru-hole NONE  Nickel on all Note: UL models available, T1 .487” high, 15/32 bushing V2 .555” high, V-bracket bushings (except D8, see pages F-4 & F-5. T1P Anti-rotation, .487” high, V4 .630” high, V-bracket satin chrome) 15/32 bushing V6 .460” high, V-bracket 2 Black T2P Flatted, anti-rotation, V7 .630” high, V-bracket .610” high, 15/32 bushing, V8 .953” high, V-bracket TP Anti-rotation, .687” high, V9 1.150” high, V-bracket W .750” long, wire wrap F 15/32 bushing V21 .555” high, snap-in V-bracket W1 .964” long, wire wrap V31 .460” high, snap-in V-bracket W3 .425” long, wire wrap T V41 .630” high, snap-in V-bracket W4 1.062” long, wire wrap o V71 .630” high, snap-in V-bracket W5 1.305” long, wire wrap g V81 .953” high, snap-in V-bracket Z3 Quick connect g l e Dimensions are shown: Inches (mm) 25 may 18 Specifications and dimensions subject to change www.ckswitches.com F–3

7000 Series Miniature Toggle Switches Materials CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or CENTER CONTACTS & ALL TERMINALS: B contact material: Copper diallyl phthalate (DAP) (UL 94V-0). alloy, with gold plate over nickel plate. Q contact material: Copper ACTUATOR: Brass, chrome plated. alloy, silver plated. See above for additional contact materials. BUSHING: Brass or zinc, nickel plated. TERMINAL SEAL: Epoxy. HOUSING: Stainless steel. HARDWARE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. SWITCH SUPPORT: Brass or steel, tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate NOTE: Materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. over nickel plate. Q contact material: Coin silver, silver plated. See page F-15 for additional contact materials. SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 UL** NO. MODEL POLES MODEL NO. NO. SCHEMATIC 7101 U11 ON NONE ON 2-3 N/A 2-1 7103 U13 ON OFF ON 7105 U15 MOM. OFF MOM. 2-3 OPEN 2-1 SP 7107 U17 ON OFF MOM. 7108 U18 ON NONE MOM. 2-3 N/A 2-1 7109 U19 NONE ON MOM. N/A 2-3 2-1 SPDT SPDT 1/4-40 UNS-2A KEYWAY Terminal Numbers For Reference Only Part number shown: 7101SYZBE 7201 U21 ON NONE ON 2-3,5-6 N/A 2-1,5-4 7203 U23 ON OFF ON 7205 U25 MOM. OFF MOM. 2-3,5-6 OPEN 2-1,5-4 7207 U27 ON OFF MOM. DP 7208 U28 ON NONE MOM. 2-3,5-6 N/A 2-1,5-4 7211 * U211* ON ON ON 7213* U213* ON ON MOM. 2-3,5-6 2-3,5-4 2-1,5-4 7215* U215* MOM. ON MOM. DPDT DPDT 1/4-40 UNS-2A KEYWAY F Terminal Numbers For Reference Only Part number shown: 7201SYZQE e gl MOM. = Momentary ** U11–U415 model nos. with all options when ordered with G, R, Q or S contact material. * Wiring for 3-way switch, see Section N. g o T Dimensions are shown: Inches (mm) 25 may 18 Specifications and dimensions subject to change www.ckswitches.com F–4

7000 Series Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 UL** NO. MODEL POLES MODEL NO. NO. SCHEMATIC 7301 U31 ON NONE ON 2-3,5-6,8-9 N/A 2-1,5-4,8-7 7303 U33 ON OFF ON 3P 7305 U35 MOM. OFF MOM. 2-3,5-6,8-9 OPEN 2-1,5-4,8-7 7307 U37 ON OFF MOM. 7308 U38 ON NONE MOM. 2-3,5-6,8-9 N/A 2-1,5-4,8-7 3PDT 3PDT 1/4-40 UNS-2A KEYWAY Terminal Numbers Part number shown: 7301SYZQE For Reference Only 7401 U41 ON NONE ON 2-3,5-6,8-9,11-12 N/A 2-1,5-4,8-7,11-10 7403 U43 ON OFF ON 7405 U45 MOM. OFF MOM. 2-3,5-6,8-9,11-12 OPEN 2-1,5-4,8-7,11-10 7408 U48 ON NONE MOM. 2-3,5-6,8-9,11-12 N/A 2-1,5-4,8-7,11-10 4P 7411* U411* ON ON ON 7413* U413* ON ON MOM. 2-3,5-6,8-9,11-12 2-3,5-4,8-9,11-10 2-1,5-4,8-7,11-10 7415* U415* MOM. ON MOM. 4PDT 4PDT 1/4-40 UNS-2A KEYWAY Terminal Numbers Part number shown: 7401SYZQE For Reference Only MOM. = Momentary * Wiring for 3-way switch, see Section N. ** U11–U415 model nos. with all options when ordered with G, Q, R or S contact material. F T o g g l e Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–5

7000 Series Miniature Toggle Switches ACTUATOR FINISH ACTUATOR ACTUATOR S  .4206” HIGH 1 M  .2006” HIGH 1 L, L1, L2  .8406”, .6406”, .5506” HIGH 1 SP  ANTIROTATION, .4206” HIGH 2,3 MP  ANTIROTATION, .2006” HIGH 2,3 L1P, L2P   ANTIROTATION, .8406”, .6406”, .5506” HIGH 2,3 * OPTION * *DIM. ‘A’ CODE DIM ‘A’ L .840 (21,34) L1, L1P .640 (16,26) L2, L2P .550 (13,97) S actuator standard when ordered with M actuator standard when ordered with C, W-W5, Z & Z3 terminations. all terminations except C, W-W5, Z & Z3. Caps are available separately, see page F-16. Caps are available separately, see page F-16. Caps are available separately, see page F-16. *P1  FLATTED WITH ANTIROTATION, .8406” HIGH 2,3 *P3  FLATTED WITH ANTIROTATION, *P4   FLATTED WITH ANTIROTATION, .2506” HIGH .4506” HIGH 2,3 2,3 * * * *Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.) T  .687 (17,45)6 HIGH 1,2 T1  .487 (12,37)6 HIGH 1,2 T2P   FLATTED, ANTIROTATION, .6106” HIGH, TP   T1P   15/32 BUSHING 1,2,3 ANTIROTATION, .687 (17,45) HIGH, ANTIROTATION, .487 (12,37) HIGH, 15/32 BUSHING 1,2,3 15/32 BUSHING 1,2,3 15/32-32 UNS-2A (1.678,475) 15/32-32 UNS-2A (1.428,377) 15/32-32 UNS-2A .448 (11,38) Bushing option code not required unless CW splashproof bushing ordered. TP & T1P Bushing option code not required. T2P actuator not available actuators not available with CW splashproof bushing. All TXX actuators not available on with CW splashproof bushing or single pole models with single pole models with A-A4, AW1-AW4 terminations. A-A4, AW1-AW4 terminations. 1 L, L1, L2, M, S & TXX actuators not available NOTE: Black hardware is supplied when either with Y1 bushing. OPTION black actuators or bushings are specified. For F 2 L1P, L2P, MP, P1, P3, P4, SP & TXX actuators CODE ACTUATOR FINISH additional hardware, see Section N. not NONE BRIGHT CHROME-With Nickel Plated Bushing available with D8 & H4 bushing. e 3 Antirotation: Provides anti-‘push-in’ feature on 2 BLACK l g actuator. S SATIN CHROME g * Add .070 (1,78) for D, D8 & D9 bushings, o subtract .020 (0,51) for H3 bushing. T Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–6

7000 Series Miniature Toggle Switches ACTUATOR FINISH/COLOR ACTUATOR ACTUATOR K2   K12   LOCKING LEVER, .704” HIGH LOCKING LEVER, .732” HIGH (threaded) (threaded) K9   K19   LOCKING LEVER, .704” HIGH LOCKING LEVER, .732” HIGH (unthreaded) (unthreaded) OPTION CODE ACTUATOR CAP FINISH NONE NATURAL ALUMINUM–With Nickle Plated Bushing 2 BLACK ANODIZED ALUMINUM * * 3 RED ANODIZED ALUMINUM 7 BLUE ANODIZED ALUMINUM * All KXX models including KXXCW have a keyway Replaces K, K8 Replaces K1, K18 Locking Positions NOTE: To prevent accidental actuation, toggle must be lifted before being actuated. When released, toggle will lock in place. Overtightening mounting nut may cause actuator to bind. Locking levers supplied with bushing shown. –01 Models –03 & –11 Models –05, –09 & –15 Models –07 & –13 Models –08 Models Bushing option code not required unless CW splashproof 2 Position lock 3 Position lock 1 Position lock 2 Position lock 1 Position lock bushing ordered. L40   L41   L42   LEVER HANDLE WITHOUT CAP PLASTIC LEVER HANDLE WITH PLASTIC LEVER HANDLE WITH ANTIROTATION AND CAP, P/N 4810 ANTIROTATION AND CAP, P/N 4811 No color choice required. Finish: Matte (L41 & L42). L3   PLASTIC .940” HIGH Gloss Plastic OPTION PLASTIC ACTUATOR * CODE COLORS NONE No Actuator Color (L40 option) Chrome Finish 2 BLACK 3 RED F * Add .070 (1,78) for D, D8 & D9 bushings, NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability, T subtract .020 (0,51) for H3 bushing. order L40 actuator option and lever handles separately, see page F-16. L4X actuators not o available with H4, Y1, Y4 bushings. Antirotation: Provides anti-‘push-in’ feature on actuator. g g l e Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–7

7000 Series Miniature Toggle Switches BUSHING FINISH BUSHING BUSHING Y   NONE   D   H   H3   .350” HIGH, NO BUSHING .280” HIGH, .296” HIGH, FLAT .315” HIGH, KEYWAY THREADED, KEYWAY THREADED, KEYWAY THREADED, HIGH TORQUE 1,2 THREADED, HIGH Y9   .350” HIGH, D8   .280” HIGH, UNTHREADED, TORQUE 1,2 UNTHREADED, FLAT 3 KEYWAY D9   .280” HIGH, UNTHREADED, KEYWAY No bushing choice required with KXX, TXX actuators. (exception: Specify CW if splashproof bushing desired). D8 D, D9 1/4-40 UNS-2A 1/4-40 UNS-2A 1/4-40 UNS-2A 1/4-40 UNS-2A D9 bushing standard with all terminations Y bushing standard with C, except C, W-W5, Z or Z3. Add .070 (1,78) to Subtract .020 (0,51) from all actuator W-W5, Z or Z3 terminations. all actuators lengths with D, D8 & D9 bushings. lengths for H3 bushing. H4   Y1   Y3   Y4   8mm HIGH, KEYWAY, THREADED, .378” HIGH, KEYWAY, THREADED, 8.9mm HIGH, KEYWAY, .378” HIGH, FLAT, THREADED, METRIC HIGH TORQUE 1,2,3 HIGH TORQUE 1,2,4 THREADED, METRIC HIGH TORQUE 1,2,5 1/4-40 UNS-2A 1/4-40 UNS-2A CW  THREADED, SPLASHPROOF 1,2 For T & T1 actuators. For actuators other than T and T1. OPTION CODE BUSHING FINISH NONE NICKEL on all bushings except ‘D8’ satin chrome. 2 BLACK 15/32-32 UNS-2A 1/4-40 UNS-2A 1 Will withstand 12 in.-lbs. of torque with no distortion. 2 CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models with A4 terminations. 3 D8 & H4 bushings available only with L, L1, L2, M & S actuators. 4 Y1 bushing available only with LXP, MP, PX & SP actuators. IP67 Degree of protection, totally protected against IP67 Degree of protection, totally protected 5 Y4 bushing not available with L4X actuators. dust, full-scale voltage protection, temporary immersion. against dust, full-scale voltage protection, Internal actuator seal standard. temporary immersion. Internal actuator seal NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with External bushing seal available separately from and external bushing seal washer standard. threaded bushings. Black hardware is supplied when either black bushings or APM Hexseal, part # MFS-60064. IP65 degree of protection for LXP, MP, PX actuators are specified. Optional mounting nut and locking ring styles and finishes or SP with CW option. available, see Section N. PANEL MOUNTING 1/4 INCH BUSHING METRIC BUSHING 15/32 INCH BUSHING F e l g Without locking ring. With standard locking ring. With small locking ring. Without locking ring.With locking ring. Without lockingr ing. With standard locking ring. g o T Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–8

7000 Series Miniature Toggle Switches TERMINATIONS Z   C   SOLDER LUG PC THRU-HOLE PC MOUNTING .030 (0,76) Thk. SPDT thru 4PDT Not available with P, R or S contact materials. SPDT thru 4PDT Z3   W, W1, W3, W4, W5   QUICK CONNECT WIRE WRAP OPTION CODE DIM ‘A’ Dim 'A' W .750 (19,05) W1 .964 (24,48) W3 .425 (10,80) W4 1.062 (26,97) .030 (0,76) Thk. W5 1.305 (33,15) .030 (0,76) Thk. Not available with P, R or S contact materials. Mating quick connector available, order part SPDT thru 4PDT SPDT thru 4PDT number 530100000, page F-16. A   RIGHT ANGLE, PC THRU-HOLE Actuator Shown 7101MD9ABE In Pos. 1 SECTION A-A Horizontal Actuation Terminal Nos. For Reference Only SPDT Switch support with CW, H, H3, H4, Y1, Y4 bushings and KXX actuators. Part No. Shown: 7101MHABE A3   AW1, AW4   RIGHT ANGLE, SNAP-IN, PC THRU-HOLE RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING OPTION CODE DIM ‘A’ AW1 .72 (18,3) F Dim 'A' AW4 .83 (21,1) T o Not available with I seal option. g Terminal bend radii and lead-in manufacturing option. g l e Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–9

7000 Series Miniature Toggle Switches TERMINATIONS A   RIGHT ANGLE, PC THRU-HOLE 7201MD9ABE Actuator Shown Terminals & Horizontal Actuation In Pos. 1 Support SECTION A-A DPDT A3   AW1, AW4   RIGHT ANGLE, SNAP-IN, PC THRU-HOLE RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING OPTION CODE DIM ‘A’ DIM 'A' AW1 .40 (10,2) AW4 .50 (12,7) .33 (8,4) Not available with I seal option. Terminal bend radii and lead-in manufacturing option. A   RIGHT ANGLE, PC THRU-HOLE 7301MD9ABE Horizontal Actuation Actuator Shown Terminals & In Pos. 1 Support SECTION A-A 3PDT AW4   RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING .18 (4,6) F e l .33 TYP. g (8,4) g Not available with I seal option. o Terminal bend radii and lead-in manufacturing option. T Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–10

7000 Series Miniature Toggle Switches TERMINATIONS A2   RIGHT ANGLE, PC THRU-HOLE, .156” PITCH PC MOUNTING 7101MHA2BE Terminals & Support Horizontal Actuation Actuator Shown In Pos. 1 SPDT Switch support with CW, H, H3, H4, Y1, Y4 bushings and KXX actuators. Not available with TXX actuators and I seal. Part No. Shown: 7101MHA2BE Terminal bend radii and lead-in manufacturing option. A4   RIGHT ANGLE, PC THRU-HOLE .156” PITCH PC MOUNTING 7101MD9A4BE Horizontal Actuation SPDT Actuator Shown In Pos. 1 Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings, NOTE: The A4 option is available with any contact material and can be UL recognized and and I seal. Terminal bend radii and lead-in manufacturing option. CSA certified. The PC pattern must clear switch support legs. AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING 7101MD9AV2BE Horizontal Actuation Actuator Shown In Pos. 1 SPDT SECTION A-A Not available with I seal option. Terminal bend radii and lead-in manufacturing option. AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, PC MOUNTING .150” PITCH 7201MD9AV2BE Vertical Actuation DPDT F T SECTION A-A o Actuator Shown In Pos. 1 g g Not available with I seal option. Terminal bend radii and lead-in manufacturing option. le Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–11

7000 Series Miniature Toggle Switches TERMINATIONS AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING 7301MD9AV2BE Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A 3PDT Not available with I seal option. Terminal bend radii and lead-in manufacturing option. AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING 7401MD9AV2BE Vertical Actuation 4PDT Actuator Shown In Pos. 1 SECTION A-A Not available with I seal option. Terminal bend radii and lead-in manufacturing option. V2, V6, V7, V8   VERTICAL MOUNT, V-BRACKET V21, V71, V81   VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7101MD9__BE Snap-In SPDT OPTION CODE DIM ‘A’ Actuator Shown In Pos. 1 V2, V21 .555 (14,10) V6 .460 (11,68) Not available with I seal option. V7, V71 .630 (16,00) F V8, V81 .953 (24,21) e l g g o T Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–12

7000 Series Miniature Toggle Switches TERMINATIONS V2, V6, V7, V8   VERTICAL MOUNT, V-BRACKET PC MOUNTING V21, V61, V71, V81   VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ OPTION CODE DIM ‘A’ 7201MD9__BE Snap-In V2, V21 .555 (14,10) DPDT V6, V61 .460 (11,68) V7, V71 .630 (16,00) Actuator Shown In Pos. 1 V8, V81 .953 (24,21) Not available with I seal option. V2, V7, V8   VERTICAL MOUNT, V-BRACKET PC MOUNTING V21, V71, V81   VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ 7301MD9__BE 3PDT OPTION CODE DIM ‘A’ Snap-In V2, V21 .555 (14,10) V7, V71 .630 (16,00) Actuator Shown In Pos. 1 V8, V81 .953 (24,21) Not available with I seal option. V2, V7, V8   PC MOUNTING VERTICAL MOUNT, V-BRACKET V21, V71, V81   VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ OPTION 7401MD9__BE CODE DIM ‘A’ 4PDT Snap-In V2, V21 .555 (14,10) F V7, V71 .630 (16,00) V8, V81 .953 (24,21) T Actuator Shown In Pos. 1 o g Not available with I seal option. g l e Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–13

7000 Series Miniature Toggle Switches TERMINATIONS V3, V4, V9   VERTICAL MOUNT, V-BRACKET PC MOUNTING V31, V41   VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ OPTION CODE DIM ‘A’ Snap-In V3, V31 .460 (11,68) V4, V41 .630 (16,00) 7101MD9__BE SPDT V9 1.150 (29,21) Actuator Shown In Pos. 1 Not available with I seal option. V3, V4, V9   VERTICAL MOUNT, V-BRACKET V31, V41   VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7201MD9__BE DPDT OPTION Snap-In CODE DIM ‘A’ V3, V31 .460 (11,68) V4, V41 .630 (16,00) Actuator Shown In Pos. 1 V9 1.150 (29,21) Not available with I seal option. V4, V9   VERTICAL MOUNT, V-BRACKET V41   VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7301MD9__BE 3PDT OPTION F Snap-In CODE DIM ‘A’ V4, V41 .630 (16,00) e Actuator Shown In Pos. 1 V9 1.150 (29,21) l g g Not available with I seal option. o T Dimensions are shown: Inches (mm) 25 may 18 Specifications and dimensions subject to change www.ckswitches.com F–14

7000 Series Miniature Toggle Switches TERMINATIONS V4, V9   VERTICAL MOUNT, V-BRACKET PC MOUNTING V41   VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim 'A' 7401MD9__BE 4PDT Snap-In OPTION CODE DIM ‘A’ Actuator Shown In Pos. 1 V4, V41 .630 (16,00) Not available with I seal option. V9 1.150 (29,21) CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS B GOLD 1 GOLD 1 LOW LEVEL/ P MATTE-TIN 6 DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. Q SILVER 5 S SILVER 4,5 MATTE-TIN 6 POWER 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. G GOLD OVER GOLD 3 LOW LEVEL/DRY 0.4 VA MAX @ 20 V AC OR DC MAX. OR 5 AMPS @ 120 V AC R SILVER 2,3 MATTE-TIN 6 CIRCUIT OR POWER OR 28 V DC; 2 AMPS @ 250 V AC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. U11-U415 model numbers with all options when ordered with G, 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate S, R, or Q contact material. over nickel plate. B contact material standard with all terminations except C, Z & Z3. 4 END CONTACTS: Coin silver, silver plated. Q contact material standard with C, Z & Z3 terminations. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. P, S & R contact materials not available with Z & Z3 terminations. 6 TERMINALS: Copper alloy, with matte tin alloy nickel plate. F T o g g l e Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–15

7000 Series Miniature Toggle Switches SEAL E   I   EPOXY SEAL EPOXY POTTED BASE NO. Dim. 'A' POLES DIM ‘A’ SP .410 (10,41) DP .440 (11,18) 3P .505 (12,83) 4P .505 (12,83) Compatible with “bottom-wash” PC board cleaning methods. Available with C, W-W5, Z & Z3 terminations only. AVAILABLE HARDWARE Cap Cap Cap (.93,8733) (1.76,8475) (.73,1922) PART NO. PART NO. PART NO. 896801000 WHITE 763701000 WHITE 706201000 WHITE 896802000 BLACK 763702000 BLACK 706202000 BLACK 896803000 RED 763703000 RED 706203000 RED Material: Polyethylene Material: Vinyl Material: Vinyl Finish: Matte Finish: Matte Finish: Matte L41 Lever handle L42 Lever handle Fits Z3 Termination female connector .477 .777 (12,12) (19,74) NOTE: Additional nuts, locking rings and lockwashers available PART NO. PART NO. PART NO. separately, see Section N. 481001000 WHITE 481101000 WHITE 530100000 448811000023206030 BRLEADCK 448811110023206030 BRLEADCK Available in loose pieces. Other colors available, consult Customer Service Center. Material: Nylon Material: Nylon Finish: Matte Finish: Matte 759D02000 Sealing Boot 703D02000 Sealing Boot 704D02000 Sealing Boot .204 (5,2) )7 ,6 1 ( 7 56. 16 [0.630] ø 2 [0.079] 7) ø .331 (8,4) 6, 1 .658 ( )0,42( 5 .464 (11,79) 4 9 . F .524 (13,3) 15/32-32 NS-2A 1/4-40 uns-2A nut 15/32-32, NS-2A e NOTE: For use with T, TP and T2P style actuators. Cannot gl NOTE: For use with S actuator style when combined NOTE: For use with T and TP style actuators. Cannot b71e0 7u,s 7e2d0 f7o, r7 S3w07it, cahn dFu 7n4c0t7io.ns: 7103, 7203, 7303, 7403, g with D, H, H3, Y, and Y4 bushings be used for Switch Functions: 7103, 7203, 7303, o 7403, 7107, 7207, 7307, 7407. T Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–16