7000 Series Miniature Rocker & Lever Handle Switches Features/Benefits Typical Applications • M ulti-pole and multi-position • Telecommunications • W ide variety of actuator and • Instrumentation termination options • Medical equipment • Epoxy terminal-seal compatible with bottom wash cleaning • RoHS compliant Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC; diallyl phthalate (DAP) (UL 94V-0). 2 AMPS @ 250 V AC. See page G-20 for additional ratings. ACTUATOR: Nylon, black. ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break FRAME (FRONT MOUNT): Nylon, black. cycles at full load. All other models: 40,000 cycles. FRAME (REAR MOUNT): Spring steel, black. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 BUSHING: Brass or zinc, nickel plated. V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. END CONTACTS: B contact material: Copper alloy, with gold plate over OPERATING TEMPERATURE: –30ºC to 85ºC. nickel plate. Q contact material: Coin silver, silver plated. See page SOLDERABILITY: Per MIL-STD-202F method 208D, or G-20 for additional contact materials. EIA RS-186E method 9 (1 hour steam aging). CENTER CONTACTS & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper NOTE: Any models supplied with S, P, R, Q, B or G contact material are RoHS compliant. alloy, silver plated. See page G-20 for additional contact materials. NOTE: Specifications and materials listed above are for switches with standard options. TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical For information on specific and custom switches, consult Customer Service Center. Data Section HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless steel. Standoff: Nylon standard. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-4 through G-24 . For additional options not shown in catalog, consult Customer Service Center. All mod- els have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function 7101 SP On-None-On Contact Material 7103 SP On-Off-On Actuator B Gold 7105 SP Mom.-Off-Mom. J1 .531 long rocker Terminations P Gold, matte tin 7107 SP On-Off-Mom. J2 Lever A Right angle, PC thru-hole Q Silver 7108 SP On-None-Mom. J3 .906” long rocker AV2 Vertical right angle, PC thru-hole S Silver, matte-tin 7109 SP None-On-Mom. J10 1.318” long rocker C PC Thru-hole G Gold over silver 7201 DP On-None-On J11 Rocker with frame Z Solder lug R Gold over silver, matte-tin J15 Rocker, snap-in 7203 DP On-Off-On A3 Right angle, snap-in, PC thru-hole J16 Rocker with frame, snap-in 7205 DP Mom.-Off-Mom. AV3 Vertical right angle, J19 Rocker with frame Seal 7207 DP On-Off-Mom. snap-in, PC thru-hole J21 Lever with frame E Epoxy 7208 DP On-None-Mom. AW3 Right angle, extended, PC thru-hole J25 Lever, snap-in I Epoxy potted base 7211 DP On-On-On V2 .555” high, V-bracket J26 Lever with frame, snap-in 7213 DP On-On-Mom. V3 .460” high, V-bracket J37 Rocker with frame 7215 DP Mom.-On-Mom. V4 .630” high, V-bracket Actuator Color J50 Rocker 7301 3P On-None-On V5 Vertical right angle, PC thru-hole 2 Black Frame Color r J51 Rocker with frame e 7303 3P On-Off-On V6 .460” high, V-bracket 1 White 2 Black J52 Rocker with frame for k 7401 4P On-None-On V7 .630” high, V-bracket 3 Red NONE No frame color required LED, snap-in c 7405 4P Mom.-Off-Mom. V8 .953” high, V-bracket 1 White Ro 7No4t1e1: U 4L Pm Oodne-Olsn -On JJJ666012 LLLeeevvveeerrr wwiitthh ffrraammee, fsonr ap-in VV93 1 1.4.16500” ”h ihgihg,h ,V -Vb-rbarcakcekte,t snap-in M(J1e1t, aJl1 F9,r aJ2m1 e& Color aavnadi lGab-6le., see pages G-5 J90 LLEevDe, rsnap-in VV5611 V.4e6rt0ic”a hl irgighh, tV a-bnrgalec,k estn, aspn-ainp-in J23 7 BAlcatcukators) J91 Lever with frame, snap-in W .750” long, wire wrap 1 White W3 .425” long, wire wrap W5 1.305” long,wire wrap Z3 Quick connect Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–4

7000 Series Miniature Rocker & Lever Handle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 UL** NO. MODEL POLES MODEL NO. NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC 7101 U11 ON NONE ON N/A 7103 U13 ON OFF ON 7105 U15 MOM. OFF MOM. 2-3 OPEN 2-1 SP 7107 U17 ON OFF MOM. 7108 U18 ON NONE MOM. N/A 7109 U19 NONE ON MOM. N/A 2-3 2-1 SPDT SPDT Terminal Nos. Part number shown: 7101J1ZQE2 For Reference Only 7201 U21 ON NONE ON N/A 7203 U23 ON OFF ON 7205 U25 MOM. OFF MOM. OPEN 7207 U27 ON OFF MOM. 2-3,5-6 2-1,5-4 DP 7208 U28 ON NONE MOM. N/A 7211* U211* ON ON ON 7213* U213* ON ON MOM. 2-3,5-4 7215* U215* MOM. ON MOM. DPDT DPDT Terminal Nos. Part number shown: 7201J1ZQE2 For Reference Only R MOM. = Momentary * Wiring for 3-way switch, see Section N. o ** U11 through U413 model nos. with all options when ordered with G, Q, R or S contact material. c k e r Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–5

7000 Series Miniature Rocker & Lever Handle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. MODEL NO. UL** POLES MODEL NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC 7301 U31 ON NONE ON N/A 3P 2-3,5-6,8-9 2-1,5-4,8-7 OPEN 7303 U33 ON OFF ON 3PDT 3PDT Part number shown: 7301J1ZQE2 Terminal Nos. For Reference Only 7401 U41 ON NONE ON N/A 4P 7405 U45 MOM. OFF MOM. 2-3,5-6,8-9,11-12 OPEN 2-1,5-4,8-7,11-10 7411* U411* ON ON ON 2-3,5-4,8-9,11-10 4PDT 4PDT Part number shown: 7401J1ZQE2 Terminal Nos. r For Reference Only e k c MOM. = Momentary o * Wiring for 3-way switch: See Technical Data section of this R ** U11 through U411 model nos. with all options when ordered with G, Q, R or S contact material. catalog for RoHS compliant and compatible definitions and specifications. Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–6

7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PANEL REAR MOUNT ACTUATOR J1   ROCKER OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED Finish: Matte. Other colors, custom actua- tor markings and legends available, consult Customer Service Center. NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick J2   panel are supplied standard on all switches with LEVER panel mounting brackets. Actuators available separately, see page G-21 through G-22. Hardware is available see Technical Data section of this catalog. J1, J2, J3 & J10 Actuators available with C, W-W5, Z or Z3 terminations. PANEL MOUNTING J1 & J2 Actuators J3   ROCKER DIMPLES MFG. OPTION J3 Actuator J10   ROCKER DIMPLES MFG. OPTION J10 Actuator R o c k e r Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–7

7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT ACTUATOR FRAME COLOR J15   ROCKER, SNAP-IN OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED No frame color choice required OPTION CODE FRAME COLOR J16   ROCKER WITH FRAME, SNAP-IN 2 BLACK No Frame Color NONE (J15 or J25options) 1 WHITE Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J15, J16, J25, J26, J50 & J51 Actuators avail- able with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminations. J25   LEVER, SNAP-IN PANEL MOUNTING J15, J16, J25 & J26 Actuators No frame color choice required J26   LEVER WITH FRAME, SNAP-IN J50 Actuator * J50   ROCKER, SNAP-IN * For J50: Increase this dimension to .620/.625 r (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels. e k c o R No frame color choice required Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–8

7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT ACTUATOR FRAME COLOR J51   ROCKER WITH FRAME, SNAP-IN OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED J52   OPTION ROCKER WITH FRAME FOR LED, SNAP-IN CODE FRAME COLOR 2 BLACK NONE No Frame Color (J15 or J25 options) 1 WHITE Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J51, J52, J60 & J61 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminations. LED not included. For LED information, see page G-24. J60   LEVER, SNAP-IN PANEL MOUNTING J51, J60 & J61 Actuators * No frame color choice required J52 Actuator J61  LEVER WITH FRAME, SNAP-IN * R o c For J51, J52: Increase this dimension to .620/.625 k (15,75/15,88) for .060/.125(1,52/3,18) thk. panels. e r Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–9

7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT ACTUATOR FRAME COLOR ACTUATOR COLOR J62   LEVER WITH FRAME FOR LED, SNAP-IN OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED OPTION CODE FRAME COLOR 2 BLACK NONE No Frame Color LED not included. (J90 options) For LED information, see page H-25. 1 WHITE J90   LEVER, SNAP-IN Finish: Matte. Other colors, custom actua- tor markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J62, J90 & J91 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z & Z3 terminations. PANEL MOUNTING J62 Actuator * No frame color choice required. J91   LEVER WITH FRAME, SNAP-IN J90, J91 & J93 Actuators * * For J90: Increase this dimension to .620/.625 r (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels. e For J91: Increase this dimension to .620/.625 k (15,75/15,88) for .060/.125 (1,52/3,18) thk. panels. c o R Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–10

7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR–REAR MOUNT ACTUATOR FRAME COLOR J11   ROCKER WITH FRAME OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED OPTION CODE FRAME COLOR J19  ROCKER WITH FRAME 2 BLACK 1 WHITE Actuator finish: Matte. Frame finish: Gloss. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J11, J19, J21 & J37 Actuators available with C, W-W5, Z & Z3 terminations. J37 offered with Black Frame (2 color option) only. PANEL MOUNTING J11 & J21 Actuators J21   LEVER WITH FRAME J19 Actuator J37   ROCKER WITH FRAME .313 (7,95) J37 Actuator R o c k e r Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–11

7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PC MOUNT ACTUATOR J1   ROCKER OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED J2  LEVER Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. Actuators available separately, see page G-21 through G-22. J1, J2 actuators available with A, A3, AV2, AV3, AW3 & V2 terminations. J3 actuators available with AV2, AV3 & V2-V61 terminations. J50 actuators available with A (DP, 3P models only), A3 (DP, 3P models only), AV2, AV3, AW3 (DP, 3P models only) & V2-V61 terminations. J3   ROCKER J50   ROCKER r e k c o R Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–12

7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PC MOUNT ACTUATOR J60   LEVER OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. J90   LEVER Actuators available separately, see page G-21 through G-22. J60 & J90 actuators available with A (DP, 3P models only), A3 (DP, 3P models only), AV2, AV3, AW3 (DP, 3P models only) & V2-V61 terminations. TERMINATIONS Z   C   SOLDER LUG PC THRU-HOLE PC MOUNTING SPDT thru 4PDT NAvoat ilaavbaleila abcletu watitohr sP, ,s Ree o pr aSg ceos nGta-7ct tmhraotuegriha lGs.-13. SPDT thru 4PDT NOTE: Available actuators, see pages G-7 through G-13. Z3   W, W3, W5   QUICK CONNECT WIRE WRAP OPTION CODE DIM ‘A’ W .750 (19,05) Dim 'A' W3 .425 (10,80) R W5 1.305 (33,15) o c k e r Not available with P, R or S contact materials. Available actuators, see pages G-7 through G-13. Mating quick connector available; order part number 530100000, SPDT thru 4PDT SPDT thru 4PDT page G-22. NOTE: Available actuators, see pages G-7 through G-13. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–13

7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS A   RIGHT ANGLE, PC THRU-HOLE 7101J1ABE2 Horizontal Actuation SECTION A-A SPDT Actuator Shown In Pos. 1 A3   AW3   RIGHT ANGLE, SNAP-IN, PC THRU-HOLE RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING .14 (3,6) Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. NOTE: PC pattern must clear switch support leg. A   RIGHT ANGLE, PC THRU-HOLE 7201J1ABE2 SECTION A-A Horizontal Actuation Actuator Shown In Pos. 1 DPDT A3   RIGHT ANGLE, SNAP-IN, PC THRU-HOLE PC MOUNTING r e k c o R Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–14

7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS A   RIGHT ANGLE, PC THRU-HOLE 7301J1ABE2 Horizontal Actuation Actuator Shown In Pos. 1 SECTION A-A 3PDT PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7101J1AV2BE2 Vertical Actuation SPDT Actuator Shown In Pos. 1 SECTION A-A AV3   VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING R o c k e r Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–15

7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7201J1AV2BE2 Vertical Actuation SECTION A-A Actuator Shown In Pos. 1 DPDT AV3   VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7301J1AV2BE2 Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A 3PDT AV3   VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, PC MOUNTING .150” PITCH r e k c o R Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–16

7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7401J1AV2BE2 Vertical Actuation Actuator Shown In Pos. 1 4PDT SECTION A-A AV3   VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. V5   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7101J1V5BE2 Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A SPDT V51   VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING R o c k e r Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–17

7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V5   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7201J1V5BE2 Actuator Shown In Pos. 1 SECTION A-A Vertical Actuation DPDT V51   VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. V2, V6, V7, V8   VERTICAL MOUNT, V-BRACKET V61   VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7101J1__BE2 SPDT r OPTION e CODE DIM ‘A’ k c V2, V21 .555 (14,10) Ro Actuator ShoAwcntu Iant oPro Ssh. o1wn In Pos. 1 V6, V61 .460 (11,68) V7 .630 (16,00) V8 .953 (24,21) Not available with I seal option. Available actuators, see pages G-6 and G-12. Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–18

7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V2, V6, V7, V8   VERTICAL MOUNT, V-BRACKET V21, V61  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING SNAP-IN OPTION CODE DIM ‘A’ 7201J1__BE2 DPDT V2, V21 .555 (14,10) Actuator Shown In Pos. 1 V6, V61 .460 (11,68) V7 .630 (16,00) Not available with I seal option. V8 .953 (24,21) Available actuators, see pages G-6 and G-12. V2, V7, V8   VERTICAL MOUNT, V-BRACKET V21   VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING SNAP-IN OPTION 7301J1__BE2 CODE DIM ‘A’ 3PDT V2, V21 .555 (14,10) Actuator Shown In Pos. 1 V7 .630 (16,00) Not available with I seal option. Available actuators, see pages G-6 and G-12. V8 .953 (24,21) V2, V7, V8   VERTICAL MOUNT, V-BRACKET PC MOUNTING V21   VERTICAL MOUNT, V-BRACKET, SNAP-IN R SNAP-IN OPTION o CODE DIM ‘A’ c k 7401J1__BE2 V2, V21 .555 (14,10) e 4PDT V7 .630 (16,00) r Actuator Shown In Pos. 1 V8 .953 (24,21) Not available with I seal option. Available actuators, see pages G-6 and G-12. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–19

7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V3, V4, V9   VERTICAL MOUNT, V-BRACKET V31   VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7101J1__BE2 SPDT SNAP-IN OPTION CODE DIM ‘A’ Actuator Shown In Pos. 1 V3, V31 .460 (11,68) V4 .630 (16,00) Not available with I seal option. Available actuators, see pages G-6 and G-12. V9 1.150 (29,21) V3, V4, V9   VERTICAL MOUNT, V-BRACKET V31   VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7201J1__BE2 DPDT SNAP-IN OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) Actuator Shown In Pos. 1 V4 .630 (16,00) Not available with I seal option. V9 1.150 (29,21) Available actuators, see pages G-6 and G-12. V4, V9   VERTICAL MOUNT, V-BRACKET PC MOUNTING 7301J1__BE2 r e 3PDT k c SNAP-IN OPTION o SNAP-IN CODE DIM ‘A’ R V4 .630 (16,00) Actuator Shown In Pos. 1 Not avaAilacbtulea tworit hS hI osweanl Ionp Ptioosn.. 1 V9 1.150 (29,21) Available actuators, see pages G-6 and G-12. Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–20

7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V4, V9   VERTICAL MOUNT, V-BRACKET PC MOUNTING SNAP-IN 7401J1__BE2 OPTION 4PDT CODE DIM ‘A’ Actuator Shown In Pos. 1 V4 .630 (16,00) Not available with I seal option. V9 1.150 (29,21) Available actuators, see pages G-6 and G-12. CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS B GOLD 1 LOW LEVEL/ GOLD 1 P MATTE-TIN 6 DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. Q SILVER 5 S SILVER 4,5 MATTE-TIN 6 POWER 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. G GOLD OVER SILVER 2,3 GOLD 3 LOW LEVEL/DRY 0 4 VA MAX @ 20 V AC OR DC MAX OR 5 AMPS @ R MATTE-TIN 6 CIRCUIT OR POWER 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. U11-U415 model numbers with all options when ordered with 2 END CONTACTS: Coin silver, with gold plate over nickel plate. G, Q, S & R contact material. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate B contact material standard with all terminations except C, Z & Z3. over nickel plate. Q contact material standard with C, Z & Z3 terminations. 4 END CONTACTS: Coin silver, silver plated. P, S & R, contact materials not available with Z & Z3 terminations. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with Q, B, G S, P & R contact material are RoHS compliant. SEAL E   I   EPOXY SEAL EPOXY POTTED BASE 'A' NO. R POLES DIM ‘A’ o SP .410 (10,41) c k DP .440 (11,18) e 3P .505 (12,83) r 4P .505 (12,83) Available with C, W through W5, Z & Z3 terminations. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–21

7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Panel mounting hardware for rocker and lever handle switches is available separately. Mounting hardware consists of two screws, TYPICAL ASSEMBLY two nuts, two standoffs and two lockwashers per switch, and is SCREW available for panel thicknesses of 1/16, 3/32 and 1/8 inch. PANEL THICKNESS See part numbers below. Qty Part Number Description STAND-OFF 2 761103000 Standoffs LENGTH STAND-OFF 2 764100000 Mounting screws LOCKWASHER 2 764200000 Lock washers NUT 2 764300000 Hex nuts J1 & J2 actuators J3 actuators PART NO. PANEL THK. STANDOFF LENGTH PART NO. PANEL THK. STANDOFF LENGTH 761103000 1/8 IN. (3,18) .233 (5,92) 770603000 1/8 IN. (3,18) .233 (5,92) J10 actuators PART NO. PANEL THK. STANDOFF LENGTH 770703000 1/8 IN. (3,18) .233 (5,92) MATERIAL Screws, nuts, lockwashers: Stainless steel. Standoffs: Nylon, standard. J1, J11, J15 & J16 Actuators J2, J21, J25 & J26 Actuators J3 & J37 Actuators PART NO. PART NO. PART NO. 776A01000 WHITE 426D01000 WHITE 431D01000 WHITE 776A02263 BLACK 426D02263 BLACK 431D02263 BLACK 776A03000 RED 426D03000 RED 431D03000 RED Material: Nylon Material: Nylon Material: Nylon Finish: Matte Finish: Matte Finish: Matte J50, J51 & J52 Actuators J60, J61 & J62 Actuators r e k c o R PART NO. PART NO. 775A01000 WHITE 598101000 WHITE 775A02263 BLACK 613802263 BLACK 775A03000 RED 598103000 RED Material: Nylon Material: Nylon Finish: Matte Finish: Matte Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–22

7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE J90 & J91 Actuators J10 & J19 Actuators Fits Z3 Termination female connector PART NO. PART NO. 598001000 WHITE 769501000 WHITE 598002263 BLACK 769502263 BLACK 598003000 RED 769503000 RED PART NO. 530100000 Material: Nylon Material: Nylon Finish: Matte Finish: Matte Available in loose pieces. Frame for J11 & J21 Actuators Frame for J16 & J26 Actuators Frame for J51, J61 & J91 Actuators PART NO. PART NO. PART NO. 459101000 WHITE 615601000 WHITE 764500746 BLACK ENAMEL 459102000 BLACK 615602263 BLACK 764500747 WHITE ENAMEL 459103000 RED 615603000 RED 764601106 RETAINING SPRING Material: Nylon Material: Nylon Material: Spring Steel Finish: Matte Finish: Matte Frame for J19 Actuator Frame for J37 Actuator Frame for J52 & J62 Actuators R o PART NO. c k 613301000 WHITE PART NO. PART NO. 613302263 BLACK e 781000746 BLACK ENAMEL 445400746 BLACK ENAMEL 613303000 RED r 781000747 WHITE ENAMEL Material: Spring Steel Material: Nylon Material: Spring Steel Finish: Matte Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–23

7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte. TYPICAL APPLICATION J1 & J2 Actuators .047” (1,19) PANEL THK. .062” (1,57) PANEL THK. .090” (2,29) PANEL THK. .125” (3,18) PANEL THK. PART NO. PART NO. PART NO. PART NO. 452902263 452702263 452802263 452602263 BLACK J50, J60 & J90 Actuators .047” (1,19) PANEL THK. .062” (1,57) PANEL THK. .090” (2,29) PANEL THK. .125” (3,18) PANEL THK. PART NO. PART NO. PART NO. PART NO. 432502263 432602263 432702263 432802263 BLACK PANEL MOUNTING For part numbers 4529xxxxx, 4527xxxxx, For part numbers For part numbers 4528xxxxx, 4526xxxxx 4325xxxxx, 4326xxxxx 4327xxxxx, 4328xxxxx .(000,153 R) T. YMPA.X. (1.24,9557 –– .1520,583) .(M00A0,15X3 .R) T.YP. (1.24,9557 –– .1520,583) .(M00A0,15X3 .R) T.YP. (1.24,9557 –– .1520,583) .797 – .803 .595 – .605 .620 – .625 (20,24 – 20,40) (15,11 – 15,37) (15,75 – 15,88) r e k c o R Dimensions are shown: Inches (mm) G Specifications and dimensions subject to change 27 mar 17 www.ckswitches.com G–24

7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Panel Inserts Will fit Separate Snap-in frames for Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for J50, J60 & J90 actuators indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PANEL INSERT BLANK PANEL INSERT WITH HOLE FOR LED WITHOUT HOLE FOR LED PART NO. PART NO. 894902000 476602000 BLACK NOTE: Special colors, custom markings available, consult Customer Service Center. LED INFORMATION Flat denotes .025 SQ. cathode. .200 DIA. TYP. (0,63) Process Information: Soldering to LED leads must be completed within 5 seconds at (5,08˘) 500º F (260ºC) maximum. LEDs are not supplied with J52, J62 options. LED snaps into switch frame surrounding .230 DIA. .(003,706) actuator and is wired externally. (5,84˘) .340 .750 (8,64) (19,05) Suggested LED for J52 & J62 options. Dimensions for reference only. R o c k e r Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–25

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: C &K Switches: U21J16ZGE22 7107J61ZBE22 7105J47ZQE22 7105J64ZQE1 7105J47Z3QE22 7213J8ZQE2 7108J2AV2SE2 7207J50CQE2 7101J2AV2SE2 7103J2AV2SE2 7101J8V3QE2 7109J60V3QE2 7103J1V31BE2 7211J61CSI22 7101J1CBE3 7205J19ZQE22 7101J61ZQE12 7101J62CQE32 7105J61ZQE12 7107J37WBE32 7108J1ZBE2 7108J61Z3BE22 7103J50ZQE2 7107J37Z3BE22 7105J37W3BE22 7101J37CBE22 7107J37ZBE22 7301J1ABE2 7101J37CQE22 7103J62CQE22 7105J16ZBE32 7301J1AQE2 7105J91ZBE22 7105J3V3QE5 7105J1V4BE2 7108J1ABE7 7105J37Z3BE22 7101J50ZBE2 7105J90V4BE2 7101J1ZQE3 7101J52CQE22 7103J62CQE32 7101J61ZQI22 7108J2V3GE1 7411J3ZGE2 7215J1V3QE2 7201J1V4QE2 7303J3V2QE2 7205J61ZBE22 7207J1V4GE2 7205J1ZQE2 7105J1ZQE2 7205J19QE22 7201J1CBE2 7205J1CBE2 7107J37ZQE22 7401J21ZBE22 7201J1ZQE3 7101J1V6PE2 7105J19Z3QE22 7105J4ZQE2 7105J51ZQE22 7105J61ZGE22 7105J1CBE2 7105J61ZQE22 7108J1V3QE3 7108J51ZQE22 7108J61ZQE22 7101J61ZQE32 7201J52ZQE22 7201J1ZQE2 7107J50V3BE2 7107J1V3BE2 7107J1ZQE2 7107J61ZQE22 7107J51ZQE22 U11J2V3QE2 U18J2V3QE2 U18J2V3QE1 U18J2V3QE3 7101J61ZQE22 7101J51ZQE22 7101J1ZQE2 7101J1V6QE2 7101J1V3QE2 7101J1AQE2 7101J1V3QE3 7101J1ABE2 7101J1V6KE2 7101J1V61BE2 7101J1CBE2 7101J1ZQE1 7103J1ZQE2 7103J51ZQE22 7101J60AV2BE2 U31J11ZQE22 7411J2CGE2 7205J51ZQE22 7205J1CQE2 7205J61ZQE22