Single IDC Contact 18-24 AWG: WTB IINNTTEERR CCOONNNNEECCTT 9176-500 The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. This new single contact was developed as a standalone component to enhance the application uses with the IDC technology. The simplicity of inserting a wire into an SMT contact with a small tool or optional retention / termination cap allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these contacts are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the optional cap provides a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The single 9176 series contact and cap accepts 18 AWG to 24 AWG wires with an insulation diameter ranging from 1.1mm to 2.1mm. These dual beam contacts support a 10 amp current rating with a large SMT solder base to provide maximum stability on the PCB. The optional locking strain relief cap acts as the termination tool for severe vibration applications. APPLICATIONS FEATURES AND BENEFITS (cid:129) Connecting discrete wire components (cid:129) IDC contact is supplied in T&R pockets for standard SMT placement directly to the PCB (cid:129) IDC contact provides a gas-tight connection to the PCB for long term reliability (cid:129) Bringing power and signals onto a PCB (cid:129) Optional termination cap provides additional strain relief for severe environments (cid:129) Daisy chaining PCB’s together to create (cid:129) Tested to automotive levels on shock, vibration and temperature cycling for reliability a continuous string of boards (cid:129) Reduced total applied cost versus solder or crimp processes (cid:129) Application notes: refer to 201-01-124 (cid:129) Individual contacts can be located anywhere on the PCB based on specific application ELECTRICAL ENVIRONMENTAL MECHANICAL (cid:129) Current Rating: 10 Amps/Contact (cid:129) Operating Temperature: (cid:129) Insulator Material: Nylon 46: UL94V0 (cid:129) Voltage Rating: Dependant on -40ºC to +125ºC (cid:129) Contact Material: Phosphor Bronze component proximity (cid:129) Plating: Tin over Nickel (cid:129) Durability: 3 Cycles HOW TO ORDER – CONTACT OPTIONS 70 9176 001 5XX 006 Prefix Series Number of Ways Wire Gauge Size Plating 70 = Contact No of Code Accepted Option Code Details 006 = Pure Tin Ways Wire Gauge all over 001 1 Page 3 501 18 Gauge Stranded 511 20 Gauge Solid or Stranded 522 22 Gauge Solid or Stranded 532 24 Gauge Solid or Stranded HOW TO ORDER – CAP OPTIONS 60 9176 001 5XX X00 Prefix Series Number of Ways Wire Gauge Size Insulator Color 60 = Cap No of Code Wire Insulation Code Color Application Code Details Ways (AWG) 000 Black Industrial 001 1 Page 5 516 1.1-1.6 (22-24) 100 White Lighting 521 1.6-2.1 (18-20) CONNECTOR/TOOLING PART NUMBER MATRIX SERIES 9176-500 IDC HAND INSERTION TOOLING* ACCESSORY CAPS Wire Plastic Metal Cap Application AWG Positions Part Number White Black Insulation (medium volume) (high volume) Tool 18 Ø 1.6 - 2.1 1p 709176001501006 069176702001000 069176701901000 069176701801000 609176001521100 609176001521000 20 Ø 1.6 - 2.1 1p 709176001511006 069176702001000 069176701901000 069176701801000 609176001521100 609176001521000 22 Ø 1.1 - 1.6 1p 709176001522006 069176702002000 069176701902000 069176701801000 609176001516100 609176001516000 24 Ø 1.1 - 1.6 1p 709176001532006 069176702002000 069176701902000 069176701801000 609176001516100 609176001516000 * Hand Insertion Tooling and Cap Application - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124 CCeerrttiiffiiccaattiioonn:: UULL FFiillee ##EE9900772233 1

Single IDC Contact 18-24 AWG: WTB IINNTTEERR CCOONNNNEECCTT 9176-500 CONTACT DETAILS Code Accepted A Wire Gauge 501 18 AWG Stranded 0.72 511 20 AWG Solid and Stranded 0.60 522 22 AWG Solid and Stranded 0.47 532 24 AWG Solid and Stranded 0.37 NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. 3. CONTACT PLATING: PURE TIN. 4. CONNECTOR DESIGNED TO ACCEPT BETWEEN 18 AND 24 GAUGE STRANDED WIRE. SEE TABLE. 5. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 6. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION NOTES 201-01-124. 7. SMT PCB LAYOUT, REFER TO PAGE 3. 8. PACKING IN TAPE AND REEL, QUANTITY 1000 PER REEL. 9. WHEN REQUIRED, MATCHING CAP DETAILS ON DRAWING 60-9176-001-5XX-X00S. 10.ASSEMBLY TOOLING ON PAGE 5 (WITH CAP AND WITHOUT CAP). PACKING DETAILS REEL QTY 1000 LEADER 480MM TRAILER 120MM 2

Single IDC Contact 18-24 AWG: WTB IINNTTEERR CCOONNNNEECCTT 9176-500 18-24 AWG IDC WIRE TO BOARD CONNECTOR SINGLE CONTACT SMT PCB LAYOUT PURE TIN PADS ORIENTATION OF CONTACT ON PAD ASSEMBLED/INSTALLED PRODUCTS NOTES: 1. CONNECTOR CAN BE USED WITH CONTACT ONLY OR WITH OPTIONAL CAP. 2. OUTLINE OF CAP WHEN USED. 3. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND 201-01-124. 4. DIMENSIONS SHOWN ARE REFERENCED DIMENSIONS. 5. ASSEMBLY TOOLING ON PAGE 43 (WITH CAP AND WITHOUT CAP). 3

Single IDC Contact 18-24 AWG: WTB IINNTTEERR CCOONNNNEECCTT 9176-500 ASSEMBLY TOOLING – CAP USED CAP APPLICATION TOOL 06-9176-7018-01-000 ORIENTATE CAP IN TOOL UNIVERSAL HANDLE NOTES: 06 7000 7730 01 000 1. ASSEMBLY TOOLING FOR CAP. 2. AREA OF PCB TO BE KEPT CLEAR OF COMPONENTS, TACKS PERMISSIBLE. 3. WIRE AND CAP INSERTED IN ONE OPERATION. 4. REFER TO APPLICATION NOTE 201-01-124 FOR FURTHER INFORMATION. 5. REFER BELOW WHEN CONTACT USED WITHOUT CAP. ASSEMBLY TOOLING – CAP NOT USED WIRE ONTO CONTACT 2.1 WIRE (18-20 AWG) 1.6 WIRE (22-24 AWG) 06-9176-7019-01-000 06-9176-7019-02-000 06-9176-7020-01-000 06-9176-7020-02-000 UNIVERSAL HANDLE 06 7000 7730 01 000 NOTES: 1. ASSEMBLY TOOLING FOR CONTACT ONLY, NO CAP USED. 2. MINIMUM AREA OF PCB TO BE KEPT CLEAR OF COMPONENTS, TRACK PERMISSIBLE. 3. REFER TO TABLE FOR CORRECT TOOL/WIRE COMBINATION. Wire Guage Wire Metal Tool Plastic Tool Handle 4. REFER TO APPLICATION NOTE 201-01-124 FOR FURTHER Insulation ø High Volume Small to Medium Volume 22-24 AWG 1.10 to 1.60 06-9176-7019-02-000 06-9176-7020-02-000 06-7000-7730-01-000 INFORMATION. 18-20 AWG 1.60 to 2.10 06-9176-7019-01-000 06-9176-7020-01-000 06-7000-7730-01-000 4

Single IDC Contact 18-24 AWG: WTB IINNTTEERR CCOONNNNEECCTT 9176-500 CAP DETAILS Code Insulator Diameter B Text C (AWG) 516 1.1 to 1.6 (22-24) 1.00 Ø 1.6 521 1.6 to 2.1 (18-20) 1.50 Ø 2.1 NOTES: 1. CAP FOR IDC WIRE TO BOARD CONNECTION. 2. CAP MATERIAL: GLASS FILLED NYLON 46, COLOR SEE PAGE 1. 3. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION DIAMETERS 1.1MM TO 2.1MM. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106, APPLICATION NOTES 201-01-124. 6. PACKING IN BAGS, QUANTITY 1000 PER BAG. 7. FOR INSTALATION DETAILS REFER TO DRAWING 70-9176-001-XX-006S. 5