6700 Series TO-220, Subminiature Bimetal Disc Thermostat FEATURES • RoHS compliant per EU directive 2002 / 95 / EC • Gold-plated contacts • TO-220 / Y-220 international electronic package standard • Up to 20,000 life cycles @ max standard amperage • Ideal for surface and air sensing on PC boards and heat sinks • Up to 100,000 life cycles @ max gold contact amperage • VDE approved with “P” bracket option DESCRIPTION The Airpax™ 6700 series is a RoHS compliant, positive snap action, single pole / single throw, sub-miniature bimetallic thermostat which provides accurate and reliable sensing and switching in a single device. The 6700 series thermostat dimensionally conforms to the international product package standard Y220 / TO220. Thus, the 6700 may be automatically placed and soldered onto PC boards with high speed automated equipment, eliminating the need for the expensive hand placement and termination required today for most power supply thermostats. The 6700 provides fast, positive response with excellent repeatability. The thermostat has a switch capability of up to 0.5 amp for 48 VDC, and achieves low-level switching down to 0.001A to 0.020A at 5 VDC for 100,000 cycles. Temperature is pre-set at the factory and is non-adjustable in the field. Thermal conductivity is mainly through the terminals and the mounting bracket making the unit ideal for both surface mount and ambient air sensing. The nickel-plated copper mounting bracket comes standard, or you can utilize the laminated plastic mounting bracket for increased dielectric strength and VDE approval. Primarily developed for thermal management applications on power supplies, the Airpax™ 6700 series is also ideally suited for use on crowded PC boards. Typical uses include turning on an indicator light, sounding an audible alarm, switch on a control circuit to send a message to a display screen or even switching a circuit to shut down a system. Applications include computers and computer peripherals, aircraft, automotive, medical devices and test equipment. OPERATION SCHEMATICS Schematic for Schematic for Open on Rise Close on Rise Operation Operation 37 6700 Series - Introduction http://airpax.sensata.com

s e ri e S 0 0 7 6 & 0 0 6 6 SPECIFICATIONS Contact Resistance 50 milliohms max (before and after rated life) Contact Ratings Cycles Voltage Amps (resistive) 20,000 48 VDC 0.5 100,000 5 VDC 0.001 (gold) Contact Operations Either close on rise (make) or open on rise (break) Operating Temperature 40°C to 130°C (104°F to 266°F) Temperature Tolerance Standard of ±5°C (±9°F) with nominal operating temperature settings in 5°C increments Short Term / Long Term Short = 260°C (500°F), 10 second duration Long = -55°C to 160°C (-67°F to 320°F) Exposure Limit Nickel-plated copper bracket has 1480 VAC 60Hz, 1 second duration terminals to case. Plastic bracket Dielectric Strength has 2000 VAC 60Hz, 1 second duration terminals to case. Insulation Resistance 100 Mohms at 500 VDC Contact Bounce 3 milliseconds max (make) Vibration Per Mil-Std-202, method 204D, test condition D, 10 to 2,000 Hz Shock Per Mil-Std-202, method 213, test condition C, 100 G’s for 6 millisecond duration, ½ sine wave Seal High temperature epoxy sealed for wave soldering and cleaning, moisture proof per Sensata specification S-722 (unit will not leak while submerged in 9” of water for a minimum of two minutes) Base Material PPS (Polyphenylene Sulfide), 94 VO rated Terminal Material 65% Copper, 18% Nickel Contact Material Gold-plated or overlay, silver crossbar Mounting Bracket Material Nickel-plated copper (standard) or high pressure laminated plastic (“P” mounting bracket option) Chemical Resistance Unit is resistance to water, salt, alcohol, ammonia, trichlorethane and most other organic solvents Solderability Terminal material is selectively striped with lead-free solder for improved solderability. Soldering Heat Resistance Per Mil-Std-202G, method 210F, test condition C & K, test condition K validated at 260°C for 25 seconds Weight Approximately 0.5 grams Agency Approvals cЯUus recognized E36687 VDE approval 0631/12.83 RoHS Compliant per EU Directive 2002/95/EC 6700 Series - Specifications 38

DIMENSIONAL SPECIFICATIONS, inches [mm] (4.70 ± 0.25) (10.16 ± 0.13) 0.185 ± 0.010 (5.08 ± 0.13) 0.400 ± 0.005 (0.76 ± 0.03) (3.64 ± 0.089) (6.35 ± 0.51) 0.200 ± 0.005 0.030 ± 0.001 0.1435 ± 0.0035 0.250 ± 0.020 (2.79 ± 0.13) 0.110 ± 0.005 (17.93)REF (29.59 ± 0.74) 0.706 1.165 ± 0.029 (2.79 ± 0.13) 0.110 ± 0.005 (14.35) (1.27 ± 0.10) REF (5.49 ± 0.13) 0.565 0.050 ± 0.004 0.216 ± 0.005 (0.33 ± 0.013) (0.76 ± 0.08) 0.013 ± 0.0005 0.030 ± 0.003 (5.08 ± 0.25) 0.200 ± 0.010 STANDARD PACKAGING All samples and production orders will be shipped in plastic, industry standard shipping tubes. THROUGH BOTH WALLS (Ø3.18 ± 0.05) (8.25) REF (6.73 ± 0.25) Ø0.125 ± 0.002 (0.76) 0.325 0.265 ± 0.010 TYP 0.030 (2.41 ± 0.25) 0.095 ± 0.010 (10.26 ± 0.38) 0.404 ± 0.015 (9.65 ± 0.25) (3x 0.76) (33.02) 0.380 ± 0.010 REF 3x 0.030 1.300 (31.50) 1.240 (14.22 ± 0.25) (10.26 ± 0.38) 0.560 ± 0.010 0.404 ± 0.015 (1.40 ± 0.25) THROUGH BOTH WALLS (7.62 ± 0.25) 0.055 ± 0.010 (Ø6.35) 0.300 ± 0.010 (2.54 ± 0.25) (7.62 ± 0.25) REF Ø0.250 0.100 ± 0.010 0.300 ± 0.010 (533.40 ± 1.19) (2.79 ± 0.25) 21.000 ± 0.050 0.110 ± 0.010 39 6700 Series - Dimensions http://airpax.sensata.com

s e ri e S 0 0 7 6 & STANDARD TEMPERATURE CALIBRATION TABLE 0 0 6 6 Each thermostat part number consists of functional “building OPERATE MIN DIFFERENTIAL MIN RESET blocks” to enable the user to specify the desired characteristics. (±5°C) (°C) (°C) Select the proper code in each category, then transfer it to the box indicated. Unless a special requirement is indicated, the part 40 4 20 number will be complete when the proper temperature is selected. If you have a special requirement, please call Sensata for a factory 45 4 20 assigned number to complete the part number. 50 4 30 Example 1: 55 4 30 A 67F090 thermostat will close (make contact) on a rising 60 4 40 temperature from 85°C to 95°C and will reset open (break contact) 65 4 40 on a falling temperature within a window of no greater than 6°C lower than the actual close temperature and no less than 60°C 70 4 50 ambient temperature. 75 4 50 Example 2: 80 6 55 A 67L060P thermostat has a plastic mounting bracket with 2000 85 6 55 VAC dielectric strength and VDE approval.The thermostat will open 90 6 60 (break contact) on a rising temperature from 55°C to 65°C and will reset close (make contact) on a falling temperature within a window 95 6 60 of no greater than 4°C lower than the actual open temperature and no less than 40°C ambient temperature. 100 6 70 105 6 70 The mounting bracket designation and the 4 digit manufacturing dash number are used for ordering special features and may not 110 6 80 appear as part of the marking on the thermostat. 115 6 80 Temperature set point calibration is checked at Sensata 120 9 85 Technologies with precision test equipment and proven methods. Because customer checking methods may differ, a typical variance 125 9 85 allowed for correlation is ±1°C. 130 9 90 DECISION TABLES 67 L 0 9 0 P 5 5 8 8 Basic Product Series Contact Operation F = Fan (close on rise) L = Limit (open on rise) Operating Temperature in °C, 3 digits (from above table, put “0” in front of 2 digit temps) Mounting Bracket Designation Blank or no entry for a standard nickel-plated copper bracket P = Plastic mounting bracket (VDE approved) Factory Assigned Number Nondescript, 4 digit dash number assigned for a customer’s special requirements. The dash and factory assigned number is not required for ordering a standard product 6700 Series - Decision Tables 40

©2013 Sensata Technologies, Inc. All rights reserved worldwide. The following data sheet is an excerpt from our Airpax™ Power Protection Catalog, Literature # 2455005000, printed in the USA, May 9th, 2013. Important Notice: Sensata Technologies reserves the right to make changes to, or to discontinue, any product or service identified in this publication without notice. Before placing orders, users should obtain the latest version of the relevant information to verify that the information being relied upon is current. Sensata Technologies assumes no responsibility for customers’ product designs or applications. Users must determine the suitability of the Sensata device described in this publication for their application, including the level of reliability required. Many factors beyond Sensata’s control can affect the use and performance of a Sensata product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. As these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the Sensata product to determine whether it is fit for a particular purpose and suitable for the user’s application. Sensata Technologies products are sold subject to Sensata’s Terms and Conditions of Sale which can be found at: www.sensata.com/terms.htm Sensata Technologies Inc. 529 Pleasant Street Attleboro, MA 02703, USA Phone: +1 508-236-3287 http://airpax.sensata.com/