AMP Precision Pin and Socket Contacts Signal Contacts Type III+, Crimp, Snap-In [.0625+.0010 Spring, [1.588+––00.0..000252510]Dia. Pin Body Spring, Stainless Steel Stainless Steel Ferrule, Brass, .390 Min. Nickel Flash [9.91] Pin .113 Max. [2.87] Dia. Pin Socket .530±.010 [13.46±0.25] Material and Finish —See chart. Application Tooling—Page 29 Contact Body—Brass or phosphor bronze Technical Documents Socket Retention Spring—Stainless steel 114-10004 Application Specification 108-10042 Product Specification Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡ ‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability information on page 8. Wire Size Ins. Strip Form Loose Piece Tooling Part No.** AWG Range mm2 RDaniag.e CFoinnitsahct PinContact NSoo.cket PinContact NSoo.cket LHoaonsde PToieocle ASptrpipli cFaotormrs 30-28 0.05-0.09 .015-.030 Gold/Nickel2 788085-3 788088-2 — — 90716-1 or5 6576876974-71-*1***** 0.38-0.76 Sel. Gold/Nickel3 788085-1 788088-1 788085-4 788088-3 or 680602-□*** Bright Tin 1-66425-2 1-66424-1 — — 30-26 0.05-0.15 .10.4002--.10.65021 SeGl. oGldo/lNdi/cNkieckl2el3 6666442255--78 6666442244--78 6666442299--34 6666442288--43 91515-16 466598-□*** .014-.0301 Gold/Nickel2 66393-7 66394-7 — — 90225-26 466585-3*** 0.36-0.76 Sel. Gold/Nickel3 66393-8 66394-8 66406-4 66405-4 Bright Tin 1-66106-5 1-66108-5 1-66107-1 1-66109-7 26-24 0.12-0.2 .035-.0551 Gold/Nickel2 66106-7 66108-7 66107-3 66109-3 9151o5r-16 46632o1r-□*** 0.89-1.40 Sel. Gold/Nickel3 66106-8 66108-8 66107-4 66109-4 58495-1* 466908-2*** Sel. Gold/Nickel4 — 66108-1 — 66109-1 Bright Tin 2-66102-5 3-66104-0 1-66103-8 1-66105-9 .040-.0801 Gold/Nickel2 66102-8 66104-8 66103-3 66105-3 91515-16 466323-□*** 1.02-2.03 66102-9 66104-9 66103-4 66105-4 or or Sel. Gold/Nickel3 2-66102-27 2-66104-37 — — 58495-1* 466907-2*** Sel. Gold/Nickel4 — 66104-1 — 66105-1 24-20 0.2-0.6 Bright Tin 1-66564-2 1-66563-1 66566-7 66565-7 466383-4*** .060-.1205 91542-16 or 466979-1*** 1.52-3.05 Sel. Gold/Nickel3 66564-8 66563-8 66566-4 66565-4 or 567363-□*** Bright Tin 1-66332-4 1-66331-4 1-66400-0 1-66399-0 .20.8003--.21.05041 SeGl. oGldo/lNdi/cNkieckl2el3 6666333322--78 6666333311--87 6666440000--43 6666339999--43 99105222o35r--2166 4466663924o42r--□1****** Sel. Gold/Nickel4 — 66331-2 — 66399-2 1-66098-9S Bright Tin 1-66100-9 1-66099-5 1-66101-9 .080-.1001 1-66098-8 91505-16or 466325-□*** 18-16 0.8-1.4 2.03-2.54 Gold/Nickel2 66098-8 66100-8 66099-3 66101-3 91523-16or or Sel. Gold/Nickel3 66098-9 66100-9 66099-4 66101-4 58495-1* 466906-1*** Sel. Gold/Nickel4 66098-6 — 66099-1 — Bright Tin 1-66359-4 1-66358-6 1-66361-2 1-66360-2 .080-.1001 Phos Bronze 1-66359-5 1-66358-8 1-66359-5 1-66358-8 2.03-2.54 Gold/Nickel2 66359-9 66358-9 66361-3 66360-3 91519-16 46632o6r-□*** 18-14 0.8-2.0 Sel. Gold/Nickel3 1-66359-0 1-66358-0 66361-4 66360-4 466923-2*** 1-66359-2 1-66358-3 66361-8 66360-8 Sel. Gold/Nickel4 — 66358-1 — 66360-1 .121.709--.135.8015 Bright Tin 66597-8 1-6666559988--90 66602-8 66601-9 91521-16 46695o8r-1*** Sel. Gold/Nickel3 66597-2 66598-2 66602-2 66601-2 567364-□*** 1Overall insulation crimp diameter, including crimp barrel, must not 5Contacts can ONLY be used in: Metrimate; CPC Series 1 (Arr. 23- SStandard reeling of strip form contacts. exceed .125 [3.18]. 24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors. *Commercial PRO-CRIMPER II hand tool for field repair only. Note: 2.000015 [0.00038] gold in the mating area over .000050 [0.00127] 6To use with the 626 Pneumatic Tool: remove crimping head from Straight Die Set can be adapted for use with 626 Pneumatic Tool System. min. nickel. Action Hand Tool (SAHT), order SAHT Adapter Part No. 217201-1, Insertion Tool Part No. 91002-1(for insulation diameters .070 [1.78] 3.000030 [0.00076] gold in the mating area, with gold flash on remain- Adapter Holder Part No. 356304-1(with ratchet) or 189928-1 (without), or less), No. 200893-2(for insulation diameters .090 [2.29] max.). der, over .000050 [0.00127] min. nickel. and Power Unit PartNo. 189721-1(hand actuated) or 189722-1 (foot Extraction Tool Part No. 305183. (Instruction Sheet 408-1216) 4.000030 [0.00076] gold in the mating area, with gold gradient on actuated). **There are power options available for these tools/dies. See Battery remainder, over .000050 [0.00127] min. nickel. 7Phosphor Bronze Powered Crimp tool Kit and SDE Electric Terminator on page 30. Note:All part numbers are RoHS compliant. ***Call Technical Support for Machine Applicator Part Numbers. 9 Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts Signal Contacts (Continued) Type III+, Crimp, Snap-In Grounding Pin (make first - break last) Contact Size—16 Pin Diameter—.062 [1.57] Material and Finish Related Product Data Contact Body—Copper alloy, plated Application Tooling—Pages 29, 30 tin or gold Technical Documents—Page 4 Spring—Stainless steel Wire Size Range Ins. Contact Grounding Pin Part No. Strip Form Loose Piece Dia. Applicator Hand Tool** [mm2] AWG Range1 Finish Strip Form Loose Piece Part No. Part No. .035-.055 Tin 164159-3 164162-1 91515-13or 0.12-0.2 26-24 0.89-1.4 Sel. Gold/Nickel2 164159-4 164162-2 — 58495-1* .045-.070 Tin 164160-3 164163-1 466323-□*** 91515-13or 0.2-0.6 24-20 1.14-1.78 Sel. Gold/Nickel2 164160-4 164163-2 46690o7r-2*** 9518540955--113*or Tin 164161-3 164164-1 466741-□*** 91523-13or .078-.098 0.8-1.4 18-16 or 91505-13or 1.98-2.49 Sel. Gold/Nickel2 164161-4 164164-2 680114-3*** 58495-1* 1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 2Gold flash over .000030 [0.00076] min. nickel on entire contact, with .000030 [0.00076] gold in contact area. 3Touse with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. (Call Technical Support at 800-522-6752),Adapter Holder Part No. 356304-1(with ratchet) or 189928-1 (without), and Power Unit PartNo. 189721-1(hand actuat- ed) or 189722-1 (foot actuated). *Commercial PRO-CRIMPER II hand tool for field repair only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System. **There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. ***Call Technical Support at 1-800-522-6752 for Automatic Machine Applicator Part Numbers. Extraction Tool Part No. 725840-1 Note:All part numbers are RoHS compliant. Type III+, Solder Versions Spring, Stainless Steel Solder-Type (with Preformed Wire Barrel/Insulation Support) 3.90 Min. [9.91] [.1.00.656282585++––....0000500202150804]Dia. Pin Body, Brass [12.70.8556]Max. [1.588 ] Pin .200 Localized Plate Area [5.08] Min. Pin .825 Max. Socket [20.96] Material Contact Body and Tab—Brass Retention Spring—Stainless steel .530±.010 Finish [13.46±0.25] See chart on Page 11. Socket 10 Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts Signal Contacts (Continued) Type III+, Solder Versions (Continued) Spring, Stainless Steel Solder Tab .390Min. [9.91] Pin .0625+.0010 [1.0.568285+––...000205520408] [2.709.147±±.001.205] [1.588 ] Pin Body, Brass .020 [0.51] .200 Localized Plate Area [5.08] Min. 1.112 Max. .365Max. [28.24] [9.27] Pin Socket Spring .058 Stainless Steel .120 [1.47] [3.05] .105 Ferrule, Brass, Body [2.67] Nickel Flash Brass Solder Post Brass .865 [21.97] .365 Max. [9.27] Material Contact Body and Tab—Brass Retention Spring—Stainless steel .530±.010 Finish [13.46±0.25] See chart. Socket Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡ Wire Size Loose Piece Range Contact Contact No. Finish AWG [mm2] Pin Socket 26-20 0.12-0.6 Gold/Nickel1 266182-1t 266183-1t 18-16 0.8-1.4 Gold/Nickel1 266180-1t 266181-1t Solder Duplex2 202236-7t 202237-7t Tab Bright Tin 202236-5t 202237-5t 1.000030 [0.00076] gold in mating area over .000050 [0.00127] nickel. 2Duplex plated .000030 [0.00076] gold in mating area over .000050 [0.00127] nickel on contact body; bright tin-lead on solder tab. 3Bright tin on entire contact. Note:These contacts can be used in Multimate contact cavities of all connector housings. ‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability information on page 3. Extraction Tool Part No. 305183(Instruction Sheet 408-1216) Note:All part numbers are RoHS compliant except: tIndicates non-RoHS compliant. 11 Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts Signal Contacts(Continued) Type III+, Posted (Replacement Contacts, See Note Below) .062 [1.58] Dia. Ref. .100 [2.54] Point of Gold Plating Thk. Pin Measurement .025 [0.64] Pin Spring Stainless Steel .025±.001 [0.64±0.03] Post Socket Body Brass Brass Material Contact Body and Post—Brass Retention Spring—Stainless steel .525 [13.34] Finish See chart. Socket Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡ Loose Piece Contact No. Termination Post Contact 3Termination High Post 2 Termination High Post 1 Termination High Post Method Configuration Finish Pin Socket Pin Socket Pin Socket .025 x .025 Sel. Gold/Nickel1 6-66460-4 6-66461-3 6-66460-3 6-66461-2 6-66460-2 5-66461-5 0.64 x 0.64 Bright Tin 6-66460-6 5-66461-9 6-66460-7 5-66461-8 6-66460-5 5-66461-4 Wrap-Type .045 x .045 Sel. Gold/Nickel1 1-66471-5 2-66473-0 — — 1-66471-8 1-66473-9 1.14 x 1.14 Bright Tin 1-66471-7 1-66473-8 — — 1-66471-6 1-66473-7 .031 x .062 Sel. Gold/Nickel1 1-66470-1 — — — 1-66470-0 — 0.79 x 1.57 TERMI-POINT .031 x .062 Sel. Gold/Nickel1 1-66468-3 1-66459-0 — — — — Clip 0.79 x 1.57 1Gold flash over .000050 [0.00127] nickel on entire contact, with .000030 [0.00076] gold to a distance of .200 [5.08] from mating end. Gold thickness controlled on socket O.D. Posts plated tin-lead over copper. Extraction Tool Part No. 305183 (Instruction Sheet 408-1216) Insertion Tool Part No. 200893-2 Note:These contacts are used as replacement contacts for all posted connectors. ‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability information on page 3. Note:All part numbers are RoHS compliant. 12 Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts Signal Contacts(Continued) Enhanced High Current Type III+, Crimp, Snap-In [[1.0.568285+–+–00..0.0.000025215100]Dia. Pin Body Spring, Stainless Steel StaiSnlpersinsg S,teel .390 Min. Ferrule, Brass, Pin [9.91] Nickel Flash .113 Max. [2.87] Dia. Pin Socket Material and Finish—See chart. Related Product Data .530±.010 [13.46±0.25] Contact Body—Copper Nickel Alloy Application Tooling—Pages 75-78 Retention Spring—Stainless steel Technical Documents Socket 114-10004 Application Specification 108-10024-2 Product Specification Contact Size 16—Pin Diameter .062 [1.57] Wire Size Ins. Strip Form Loose Piece Tooling Part No.** AWG Range mm2 RDaniag.e CFoinnitsahct PinContact NSoo.cket PinContact NSoo.cket LHoaonsde PToieocle ASptrpipli cFaotormrs .20.8003--.21.05041 GToinld 11--6666335599--96 21--6666335588--19 11--6666336611--64 11--6666336600--64 91519-13 4466663922o63r--□2****** 18-14 0.8-2.0 .21.1709--.31.58012 GToinld 11--6666559977--01 11--6666559988--12 1-6666660022--90 11--6666660011--02 91521-13 5466763965o48r--□1****** 1 Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 2 Contacts can ONLY be used in CPC, Series 1 (Arr. 23-24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors. 3 To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. 217201-1,Adapter Holder Part No. 356304-1(with ratchet) or 189928-1 (without), and Power Unit PartNo. 189721-1(hand actuated) or 189722-1 (foot actuated). **There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. ***Call Technical Support for Automatic Machine Applicator Part Numbers. Note:All part numbers are RoHS compliant. Ratings Voltage: 250 Volts AC/DC 600 Volts AC/DC, Series I, VDEtested and select loaded only Base Current: TypeIII+ contacts: 17 amperes, 30˚C temperature rise with single contact on 14 AWG wire Enhanced High Current Type III+contacts: 25 amperes,30˚C temperature rise with single contact on 14 AWG wire Temperature: -55˚C to +105˚C VDE 0627: XA/630/4KV/2 - Series I, VDEtested only Multiplication Rating Factor (F) Type III+Contacts (Note: 1 = 17 amperes) Percent Connector Loading Single Circuit @ 50% 100% Shell Size Wire Size Wire Size Wire Size 30 AWG 14 AWG 30 AWG 14 AWG 30 AWG 14 AWG 11-4 .291 1 .212 .905 .140 .684 13-9 .278 .995 .175 .750 .134 .567 17-16 .270 .990 .146 .625 .127 .472 23-24 .281 .985 .138 .550 .120 .416 23-37 .275 .985 .131 .497 .114 .376 Enhanced High Current Type III+Contacts (14 AWG wire only - Note: 1 = 25 amperes) Percent Connector Loading Single Circuit @ 50% 100% Shell Size 14 AWG 14 AWG 14 AWG 11-4 .880 .840 .640 13-9 .880 .640 .480 17-16 .880 .520 .400 23-24 .880 .520 .400 23-37 .880 .440 .320 Enhanced High Current Contacts & M Series Connectors: Enhanced High Current Contacts & Metrimate Connectors: (Note: 1 = 24 amperes) (Note: 1 = 24 amperes) Single Circuit @ 50% @ 100% Single Circuit @ 50% @ 100% 14 AWG 14 AWG 14 AWG 14 AWG 14 AWG 14 AWG 1 .292 .250 1 .458 .375 13 Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts Signal Contacts(Continued) Type II, Screw Machined, Crimp 1.087±.010 Material [27.61±0.25] Contact Body—Brass .472±.005 [11.99±0.13] Retention Spring—Stainless steel Finish Contact Body—.000030 [0.00076] .062±.001 Dia. gold over .000050 [0.00127] Pin [1.57±0.03] nickel. Gold thickness controlled [.21.0772 ] Max. Dia. Spring PinBody on socket O.D. Pin Retention Spring—Stainless steel Related Product Data .795±.010 Application Tooling—Pages 75-78 [20.19±0.25] Spring Socket Socket Body Socket Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡ Tooling Part No.** Wire Size Ins. Tape Mounted Loose Piece Contact Tape Mounted Loose Piece Range Dia. Contact No.2 Contact No. Color Dies for Die Set for AWG mm2 Range1 Pin Socket Pin Socket Code AMP-TAPETRONIC 626 Pneumatic Hand Machine 69875 Tool System Tool .035-.055 201611-4 — 201611-14 201613-15 Red/Red 0.89-1.40 91538-1* 90230-17 .048-.065 or 601967-1* 28-24 0.08-0.20 — — 201334-14 201332-15 Red/Red 90249-2 1.22-1.65 .095-.110 * — — 202410-14 202411-15 Green — 601967-1 2.41-2.79 .040-.062 91538-1* 201578-4 — 201578-14 201580-15 Yellow/Red 1.02-1.57 or 58541-1* 24-20 0.2-0.6 90249-2 90230-17 .055-.088 201330-6 201328-9 201330-14 201328-15 Yellow/Red or 601967-1* 1.40-2.16 18 0.9-0.9 No. Ins. 91539-1* — — 202725-14 202726-14 Blue — 90231-27 (Two) (Two) Support or 601967-1* .080-.105 90136-1* — — 202507-14 202508-15 — — — 2.03-2.67 or 601967-1* 18-16 0.8-1.4 200336-6 200333-8 200336-14 200333-14 Blue/Blue 90250-1 90231-27 91539-1* No Ins. 58541-1* Support — — ,6204219-15,6 — Blue/Blue — — or 601967-1* 3212618-23 — 212618-13,6,† — Violet/Blue 90250-1 90231-27 91539-1- 14 2 No Ins. 58541-1* Support 201570-2 201568-3 201570-14 201568-15 Violet/Blue — — or 601967-1* 1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 2For AMP-TAPETRONIC Machine No. 69875, order contacts by Tape Mounted Contact No., plus packaging code “IM REEL” (5000 parts per reel). 3Grounding pin is used to provide a make-first/break-last condition when mating and unmating connector halves. 4Use turret TH502 (1-601967-6)with hand tool 601967-1. 5Use turret TH501 (1-601967-5)with hand tool 601967-1. 6Pin length is .630±.005[16.002±.127]on these two pins. 7Die Set requires “C” Head Adapter Part No. 318161-1;Adapter Holder Part No. 356304-1(with ratchet) or 189928-1 (without); and Power Unit Part No. 189721-2(hand actuated) or 189722-2 (foot actuated). *Commercial PRO-CRIMPER II Hand Tool for field repair use only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System. **There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. †Does not use Hand Tool 91539-1 or 601967-1. ‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability informa- tion on page 8. Insertion Tool Part No. 200893-2(for insulation diameters .070 [1.78] or less). Extraction Tool Part No. 305183. Note:All part numbers are RoHS compliant. 1144 Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts Signal Contacts(Continued) Size 20 DF, Crimp, Snap-In With Insulation Support Contact Size—20 [.20.8156] Dia. Max. Pin Diameter—.040 [1.02] *See Product Spec 108-40005 .390 [9.91] .575 [14.61] [.0400±.0015Dia. [1.02±0.034] Pin .150 [3.81] Pin Localized Gold Plate Area Socket .370 [9.34] .555 Material [14.1] Pin Body—Brass .085 Dia. Max. Socket—Phosphor bronze [2.16] Contact Finish A—Select gold flash over nickel on entire contact, with additional .000030 [0.00076] gold on .[015.450] Min. mating end Localized Gold Plate Area Socket B—Duplex plated .000030 [0.00076] gold on mating end, tin Wire Ins. Contact Contact Part Nos. Tooling** Color otanc tt enrimckienla utinodne ernpdla,t ewdith entire con- RSainzgee MDaiax.. FCinoidseh Strip FormPinLoose Piece Strip ForSmockLeotose Piece ASptrpilpic Faotormr†† HTaonodl (PLCiooeocdseee) C—Gold flash over nickel on entire A 66507-3t 66507-9t 66505-3t 66505-9t contact .040 B 1658540-1t 1658540-5t 1658538-2t — 466423-□†† t Blue D—Duplex plated gold flash on 2A8W-2G4 1.02 C 66507-4t 1-66507-0t 66505-4t 1-66505-0t oor r1 406166900115--11††††tt91503-1†t Dot mating end, tin on termination end, [0.08-0.2 D 1658540-5t 1658540-2t 1658538-3t 1658538-1t with entire contact nickel underplated mm2] .060 A 66682-2t 66682-4t 66683-2t 66683-4t 466758-2††t Black Insertion/Extraction Tool Part No. 1.52 B 5066682-9t — 1-5066683-0t — or 466963-1††t91549-1†t Dot 91285-1 D 5066682-6t — 5066683-7t — or 567804-1††t Instruction Sheet—408-9404 26-22 A 745254-2t 745254-6t 745253-2t 745253-6t Ttoh iIsn stoerotl/ Einxctrlaucdte:s interchangeable tips [0Am.1Wm2-G20].4 .10.5207 CB 1764558255444--32tt 1764558255444--71tt 1764558255433--32tt 1764558255433--71tt oorr 545666767098364689---□11††††††ttt91525-1†tYeDlolotw Size 22, 28-22 AWG [0.08-0.03mm2] D 1658544-3t — 1658543-3t — Crimp Contacts 24-20 A 66506-3t 66506-9t 66504-3t 66504-9t 466422-□††t SCirziem 2p0 a, n2d8 -S2o0ld AeWr CGu [p0 .C0o8n-0ta.c6tms m2] [0Am.2Wm-0G2.]6 .10.6502 CDB 1166655688555033699---412ttt 11166-556886555330996---304ttt 1166655688555033477---431ttt 11166-556886555330774---402ttt ooor rr1 450661676980000012---111††††††ttt91503-1†t RDeodt Size 20, Posted Contacts †To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. (Call Technical Support at 800-522-6752),Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit PartNo. 189721-1(hand actuated) or 189722-1 (foot actuated). ††For complete information on AMP Strip Form Applicators for fully automatic and semiautomatic machines, contact Technical Support: 1-800-522-6752. Note:Commercial PRO-CRIMPER II Maintenance and Repair Hand Tool for Wire Size 28-24 AWG [0.08-0.2mm2] (Ins. Dia. Max. .040 [1.02]), and Wire Size 24-20 AWG [0.2-0.6mm2](Ins. Dia. Max. .060 [1.52])—Part No. 58448-2. Note:Die Set Part No. 58448-3can be adapted for use with the 626 Pneumatic Tool System. **There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. Note:All part numbers are RoHS compliant except: tIndicates non-RoHS compliant. 1155 Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts Signal Contacts(Continued) Size 20 DF, Crimp, Snap-In Without Insulation Support (Continued) .085 Dia. Max. [2.16] .390 [9.91] Pin .550 [14.0] .0400±.0015Dia. [1.02±0.034] Socket .150 [3.81] Localized Gold Plate Area Pin .100 Point of [2.54] Measurement .530 [13.46] .085 Dia. Max. [2.16] Socket Wire Contact Contact Part Nos. Tooling** Color Size Ins. Dia. Finish Pin Socket Strip Form Hand Code Range Max. Code Strip Form Loose Piece Strip Form Loose Piece Applicator Tool (PLioeocsee) 28-24 A 205310-2t — 205311-3t — AWG .068 †† — — [0.08-0.2 1.73 mm2] C — — — — 24-20 A 205202-2t — 205201-3t 205201-5t AWG .068 Red [0.2-0.6 1.73 †† 91548-1t Dot mm2] C 205202-6t 205202-7t 205201-6t 205201-7t 22-18 A 745229-2t 745229-4t 745230-2t 745230-4t AWG .068 B 1-745229-1t — 1-745230-1t 1-745230-3t Green [0.4-0.8 1.73 C 745229-5t 745229-7t 745230-5t 745230-7t †† 91513-1t Dot mm2] D — — 745230-8t — ††For complete information on AMP Strip Form Applicators for fully automatic and semiautomatic machines, contact Technical Support: 1-800-522-6752. Note:Wire insulation diameter is limited by the connector housing cavity and clearance for the insertion/extraction tool. **There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30. 16 Note:All part numbers are RoHS compliant except: tIndicates non-RoHS compliant. Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts Signal Contacts(Continued) Size 20 DF, Solder, Snap-In Contact Size—20 .085 Dia. Max. [2.16] *See Product Spec 108-40005 .133 [3.38] .390 Max. [9.91] .580 [14.73] .0400±.0015Dia. [1.02±0.034] Pin .155 [3.94] Localized Gold Plate Area Pin Socket .560 Ref. [14.22] .070 Dia. Max. [1.78] Material .085 Dia. Max. [2.16] Pin—Brass Socket—Phosphor bronze Contact Finish Gold flash over nickel on entire contact, Socket with additional .000030 [0.00076] gold on mating end Contacts to be soldered to wire before being inserted into housing. 18 AWG [0.8-0.9 mm2]Max. Wire Strip Form Loose Piece Contact No. Contact No. Pin Socket Pin Socket 66570-2 66569-2 66570-3 66569-3 Note:All part numbers are RoHS compliant. 1177 Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425 specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514 are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T E Connectivity: 66683-4