Connectors (Inlets/Outlets) 6600-4 https://www.schurter.com /PG07 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal Snap-in version F See below: Approvals and Compliances 70° C Description Other versions on request - Panel mount : - Other panel thickness Snap-in version from front side - Types for rivet mounting available upon request - Connector , Pin temperature 70 °C , Protection class I - Types for enhanced glow wire test requirements acc. IEC 60695-2- - Solder terminals or quick connect terminals 12 and -13 for the use in unattended household equipment acc. IEC 60335-1 - Variant with notch for V-Lock mating Cordsets References Alternative: version with integrated light pipes 6600-5 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet F acc. to IEC 60320-3 Ratings UL/CSA 15 A / 250 VAC; 60 Hz UL 60320-1, CSA C22.2 no. 60320-1 Dielectric Strength > 2 kVAC between L-N (for cold conditions) pin-temperature 70 > 2 kVAC between L/N-PE °C, 10 A, Protection Class I (1 min/50 Hz) Allowable Operation Tempe- -25 °C to 70 °C rature IP-Protection from front side IP 30 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class I acc. to IEC 61140 Terminal Solder terminals or quick connect ter- minals Panel Thickness S Snap-in: 1/1.2/1.5/2/2.5/3 mm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6600-4 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40017345 UL Approvals UL UL File Number: E103791 CQC Approvals CQC CCC Certificate Number: 2012010204546362 Product standards Product standards that are referenced Connectors 1

6600-4 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60320-3 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. White paperGlow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Dimensions [mm] 6600-4 S 32.5 28 +0.24.8 0 max.R4 2 35 E 3 E: Solder terminals: 24.1 mm E: Quick connect terminals 4.8 x 0.8 mm: 26.5 mm E: Quick connect terminals 6.3 x 0.8 mm: 27.5 mm 2 Connectors

Connectors (Inlets/Outlets) 6600-4 https://www.schurter.com /PG07 All Variants Panel mounting Panel Thickness s [mm] Terminal IP Protection Class Front Side Order Number Snap-in 1 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4210 █ Snap-in 1 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4210.21 Snap-in 1.2 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4212 Snap-in 1.2 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4212.21 Snap-in 1.5 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4215 █ Snap-in 1.5 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4215.21 Snap-in 2 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4220 █ Snap-in 2 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4220.21 Snap-in 2.5 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4225 Snap-in 2.5 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4225.21 Snap-in 3 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4230 Snap-in 3 Quick connect terminals 4.8 x 0.8 mm IP 30 6600.4230.21 Snap-in 1 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4310 █ Snap-in 1 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4310.21 Snap-in 1.2 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4312 Snap-in 1.2 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4312.21 Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4315 █ Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4315.21 █ Snap-in 2 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4320 █ Snap-in 2 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4320.21 Snap-in 2.5 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4325 █ Snap-in 2.5 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4325.21 Snap-in 3 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4330 █ Snap-in 3 Quick connect terminals 6.3 x 0.8 mm IP 30 6600.4330.21 Snap-in 1 Solder terminals IP 30 6600.4110 Snap-in 1 Solder terminals IP 30 6600.4110.21 Snap-in 1.2 Solder terminals IP 30 6600.4112 Snap-in 1.2 Solder terminals IP 30 6600.4112.21 Snap-in 1.5 Solder terminals IP 30 6600.4115 █ Snap-in 1.5 Solder terminals IP 30 6600.4115.21 Snap-in 2 Solder terminals IP 30 6600.4120 █ Snap-in 2 Solder terminals IP 30 6600.4120.21 Snap-in 2.5 Solder terminals IP 30 6600.4125 Snap-in 2.5 Solder terminals IP 30 6600.4125.21 Snap-in 3 Solder terminals IP 30 6600.4130 █ Snap-in 3 Solder terminals IP 30 6600.4130.21 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Suffix ".21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord lat- ching system prevents against accidental removal of the cordset. Articles for enhanced glow wire test requirements acc. IEC 60695-2-12 and -13 can be ordered with ending ".15" (xxxx.xxxx.15). They are suitable for the use in unattended household equipment acc. IEC 60335-1. Packaging unit 50 Pcs Connectors 3

6600-4 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0047 Cord retaining kits Cord retaining strain relief Countersunk, D 4700.0004 Countersunk, F 4700.0006 Mating Inlets/Plugs Category / Description Plug Overview complete IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm 4732 IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm 4735 IEC Plug E, Cord Connector (Rewireable), Straight 9009 IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 8.5 mm 4733 IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm 4736 Plug further types to 6600-4 ... Mating Inlets/Plugs shuttered Interconnection Cord Overview complete VAC13KS, Interconnection, V-Lock cord retaining, 0.6 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black 3-100-354 VAC13KS, Interconnection, V-Lock cord retaining, 1.2 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black 3-100-355 VAC13KS, Interconnection, V-Lock cord retaining, 1.5 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black 3-100-356 VAC13KS, Interconnection, V-Lock cord retaining, 3.0 m, Connector IEC C13, SVT 3x18 AWG, black 3-100-361 VAC13KS, Interconnection, V-Lock cord retaining, 1.8 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black 3-100-734 Interconnection Cord further types to 6600-4 ... 8 1 0 2 9. 0 0. 1 The specifications, descriptions and illustrations indicated in this document are based on current 4 Connectors information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S churter: 6600.4212 6600.4215 6600.4315 6600.4115 6600.4112 6600.4125 6600.4220 6600.4225 6600.4312 6600.4325 6600.411 6600.412 6600.413 6600.421 6600.423 6600.431 6600.432 6600.433 6600.4330 6600.4230 6600.4310 6600.4320 6600.4130 6600.4210 6600.4110 6600.4120 6600.4115.21 6600.4212.21 6600.4220.21 6600.4312.21 6600.4315.21 6600.4225.21