SPECIFICATION CONTROL DRAWING MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. MELTABLE INSERTS: Low-outgassing thermoplastic, color-natural. 3. SEAMLESS STUB SPLICE: Base Metal: Copper Alloy 101 or 102 per ASTM B-75. Plating: Tin plated per MIL-T-10727. CMA Range: 300 to 1510 circular mils. APPLICATION 1. This system is designed to provide an environmentally resistant splice in wires rated for at least 125°C. Splices may be either two wire stub splices or 1 to 1 or 2 to 1 parallel splices. If two wires exit from one end, they must have a combined outer diameter of less than 2.03 (0.080). 2. Parts when installed as detailed on Raychem Specification Control Drawing D-436-58/-59 shall meet performance requirements of MIL-S-81824. 3. Acceptance testing shall be in accordance with Paragraph 4.6 of MIL-S-81824. Tyco Electronics Corporation Raychem TITLE : 305 Constitution Drive STUB SPLICE SEALING Products Menlo Park, CA 94025, USA SYSTEM, TIN PLATED CRIMP UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. D-436-0128 DOCUMENT NO.: INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to amend this DATE: DOC ISSUE: 0.00 N/A drawing at any time. Users should evaluate the 26-Jan.-00 2 0.0 N/A ROUGHNESS IN suitability of the product for their application. 0 N/A MICRON DRAWN BY: REPLACES: DCR NUMBER: PROD. REV. SCALE: SIZE: SHEET: M. FORONDA D001280 D010047 A None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.