ATCA Umschlag.qxd4 17.10.2005 15:22 Uhr Seite 1 The Complete Solution for AdvancedTCA® COMMUNICATIONS, COMPUTER & CONSUMER ELECTRONICS

ATCA Umschlag.qxd4 13.10.2005 16:56 Uhr Seite 2 AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Table of Contents Need more information? Introduction to AdvancedTCA® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Call Technical Support at the numbers listed below. An AdvancedTCA®System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Technical Support is staffed with specialists well versed in all Tyco Electronics products. Products for AdvancedTCA®Systems They can provide you with: Guide Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 (cid:2) Technical Support Zone 1 Power Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 (cid:2) Catalogs Zone 2 High Speed Signal Connectors – Z-PACKHM-Zd . . . . . . . . . . . . . . . . . . . . . . . . 4 (cid:2) Technical Documents Zone 3 Connectors – Z-PACKHM-Zd RAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 (cid:2) Product Samples Zone 3 Connectors – Z-PACK MAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 (cid:2) Tyco Electronics Authorized Power Connectors – Multi-Beam XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Distributor Locations High Speed Mezzanine Connectors – MICTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 High Speed Mezzanine Connectors – MICTORSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 High Speed Mezzanine Connectors – STEP-Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Advanced Mezzanine Card (AMC)Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front &Rear I/O Connectors – RJ45 Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front & Rear I/O Connectors – SFP Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front & Rear I/O Connectors – XFP Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front & Rear I/O Connectors – Mini RJ21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front & Rear I/O Connectors – Slim I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Fiber Optic Connectors & Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Thermal Products & Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Cable Connectors & Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Power Distribution & Management Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Backplane & Chassis Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Products for AdvancedTCA®Systems (Detail, according to ATCASpecification) Zone 1 Power Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Zone 2 High Speed Signal Connectors – Z-PACKHM-Zd . . . . . . . . . . . . . . . . . . . . . . . . 16 Guide Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Zone 3 High Speed Signal Connectors – Z-PACKHM-Zd RAM . . . . . . . . . . . . . . . . . . . 19 Web Site Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 Germany: 49-6251-133-0 www.tycoelectronics.com All specifications subject to change. Consult Tyco Electronics for latest specifications.

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Introduction The Complete Solution Therefore AdvancedTCA® ExamplesofTelecom& For AdvancedTCA® (Advanced Telecommunications Network Equipment Computing Architecture), an Manufacturers’ Related Hardware designers, particularly open industry standard, has AdvancedTCA® those working on blades or been developed by PICMG®3.0, Applications & Systems chassis, are currently faced with to place high priority on cost huge challenges. The needs of Wireless Infrastructure effectiveness versus attempting the communications network Equipment to support a variety of potential infrastructure, and next genera- future technologies, at the •Base Stations tion communication applications, expense of cost and complexity. 3G (IMT-2000) are rapidly changing, which WCDMA cannot be served by existing This new standard is also CDMA2000 proprietary solutions. supported by Tyco Electronics, TD-SCDMA which shows the full range of •Radio Network Controllers ATCA compliant components (RNC) that can be offered suitable for the wide area of applications •Serving Gateway Support within telecommunication as Node (SGSN) well as data communication. •Gateway GPRS Support Node (GGSN) Why Is AdvancedTCA® Important? •Home Location Register (HLR) •IP Multimedia Subsystem ATCA provides a means for the (IMS) Servers telecommunications equipment market to take advantage of •Media and Application Servers standardized, off-the-shelf •Media Gateways and Soft hardware (enabling differentiation Switches through application-layer and system-level software rather than hardware). Wireline Networking Equipment •Shorter time to market •DSLAMs •Increased vendor choice •Multi-service switches •Increased flexibility •Media servers Multiple switch fabrics supported •Blade servers User defined I/O •VOIP Session Controllers •Lower cost (Acquisition CapEx/OpEx) Fiber Optic Networking Equipment All specifications subject to change. Consult Tyco Electronics for latest specifications. 1

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Introduction What Is AdvancedTCA®? What Is AdvancedTCA300®? What Is MicroTCA®? AdvancedTCA®(Advanced Tele- The architecture is optimized AdvancedTCA300®is an ATCA MicroTCA®is complementary to communications Computing around connectivity requirements based equipment platform, but ATCA, but is optimized for smaller Architecture) is an open industry of signaling and media gateways, compliant with the ANSI and ETSI scale and more price sensitive standard, developed by PICMG® while also providing headroom for equipment practices requiring applications. The basic premise of 3.0, to create a new blade (board) higher performance computing 300mm total depth, front access MicroTCA®is to support mezza- and chassis (shelf) form factor, elements @a 99.999% availability included. nine boards, conforming to the tailored to meet the needs of the rate. ATCA offers a scalable back- AMC®standard, connected to rapidly changing communications plane environment that supports: the backplane, and so not using network infrastructure, and next an additional carrier board. Like • A variety of standard and generation communication appli- ATCA, the MicroTCA®equipment proprietary fabric interfaces cations, which cannot be served practice is a modular, open stan- by existing proprietary solutions. • Robust system management dards based shelf level platform. This architecture places high The MicroTCA®standard has not priority on cost effectiveness • Superior power and cooling What Is AdvancedMC®? finished completion yet. versus attempting to support a capabilities. The AMC®(Advanced Mezzanine variety of potential future tech- Each board in ATCA (up to Card) standard, also developed nologies, at the expense of cost 16 boards a shelf and 3 shelves by PICMG®,defines the base-level and complexity. a rack) may support up to 200W requirements for a wide-range of high-speed mezzanine cards, While the specification is founded in a single slot. The power is sup- optimized for, but not limited to, on the requirements of the com- plied to each board via redundant AdvancedTCA®and MicroTCA® munications infrastructure, it is -48VDC feeds. Front and rear carrier blades. AMC®defines a extensible to a variety of applica- cabling practice is supported for modular add-on or “child” card tions and environments where standard 600mm total depth that extends the functionality of an highly available, highly scalable, cabinet practice, prevalent in ATCA carrier board. In an ATCA cost effective and open architec- Central Office facilities. equipment practice, the AMC® ture modular solutions are modules lie parallel to and are required. integrated onto the ATCA carrier board. The AMC cards can also be equipped in MicroTCA®shelves. www.tycoelectronics.com/products/atca An AdvancedTCA® System: where are components & modules typically used? X Typical (X) Possible Area of Application @ BP LC @ LC @ SMM PEM FTM @ GCH AdvancedTCA Front Rear Bottom Top Bottom Top Backplane Line Cards Line Cards Shelf Power Fan Tray General Tyco Products &Services Blades Blades Management Entry Modules Chassis Boards Boards Modules Modules Hardware ATCAFront AMC Front RTM Rear Blade Blade Blade Advanced Rear Mezzanine Transistion Card Module Guide Modules X X X (X) (X) X Zone 1 Power Connectors X X Zone 2 High Speed Signal Connectors X X X X Zone 3 Connectors (X) X X (X) High Speed Mezzanine Connectors X X X (X) (X) Advanced Mezzanine Card (AMC)Connectors X Front &Rear I/OConnectors X X X X Fiber Optic Connectors & Products X X X Thermal Products & Services X X X X X (X) Power Distribution &Management Modules X X (X) (X) (X) Backplane &Chassis Assemblies X X X X X X X X Cable Connectors & Cable Assemblies X X X X X 2 All specifications subject to change. Consult Tyco Electronics for latest specifications.

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA® – Guide Modules Tyco Electronics FEATURES: ATCA Guide Mod- ules are available • Configurations for front board in various sizes and backplane as well as mid- and configura- plane and coplanar applications tions and are suit- in the RTM able for use in a wide • Vertical and right-angle pins to variety of applications support right-angle and coplanar including front board, mid board configurations plane, backplane, and a Rear Transition Module as specified in the AdvancedTCA speci- • Guide pins are available in short fication. The guide hardware features improved locating or long lengths to accommodate features to ensure guidance is maintained across all com- various Tyco Electronics connec- ponent tolerances while the dual-keyed pin configuration tors allows for many different keying possibilities. www.tycoelectronics.com/products/atca Catalog 1773095 AdvancedTCA® – Zone 1 Power Connectors Tyco Electron- FEATURES: ics' ATCA Pow- er Connector is • High conductivity, precision de-signed to formed contacts meet or exceed • Selective plating in compliance the PICMG 3.0 with RoHS requirements (AdvancedTCA) specification for • Precision formed compliant ter- Zone 1 connector minations offers excellent reten- requirements including tion to ensure a reliable connec- four levels of sequential mating tion to ensure proper system functionality during live insertion or extraction of front boards. Integrated lead-in on the injection molded housing provides superior blind mate capability and is fully intermateable with competing con- nectors designed to meet the AdvancedTCA specification for power connectors. www.tycoelectronics.com/products/atca www.elconproducts.com Catalog 1773096 / 1773095 Flyer 2-1773441-7 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA® – Zone 2 High Speed Signal Connectors – Z-PACK HM-Zd Z-PACK HM-Zd FEATURES from Tyco Elec- tronics is the • Designed specifically for high- high-speed, Ad- speed differential applications vanced Differen- (3.125 Gb/s to 10+Gb/s) tial Fabric Connec- • A modular connector system with tor system specified a standard module size of 25.00 by PICMG for use in [.984] AdvancedTCA Zone 2. The coplanar application version • Z-PACK HM-Zd is an extension of using the right-angled male and identical Zone 2 card the Z-PACK 2 mm HM product line connector (right-angled female), can be used in Zone 3. In • Pin header and receptacle have addition to the four-pair connector modules specified for the exact same footprint to sim- use in AdvancedTCA Zone 2, the product line includes plify PC board layout two-pair and three-pair signal modules, coplanar connec- tors, and high-speed cable assemblies for use in Zone 3. • Optimized footprint supports A mezzanine style connector is also available in a four- quad routing techniques for pair version. improved electrical performance, ease of trace routing, and signifi- www.tycoelectronics.com/products/atca cant PCB manufacturing cost www.hmzd.tycoelectronics.com reductions Catalog 1773095 • Designed to meet Telcordia Flyer 1308658 requirements AdvancedTCA® – Zone 3 Connectors – Z-PACK HM-Zd RAM Z-PACK HM-Zd FEATURES from Tyco Elec- tronics is the high- • Designed specifically for high- speed, Advanced speed differential applications Differential Fabric (3.125 Gb/s to 10+Gb/s) Connector system • A modular connector system with specified by PICMG a standard module size of 25.00 for use in Advanced [.984] TCA Zone 2. The coplanar application version using the • Z-PACK HM-Zd is an extension of right-angled male and identical Zone 2 card connector the Z-PACK 2mm HM product line (right-angled female), can be used in Zone 3. In addition • Pin header and receptacle have to the four-pair connector modules specified for use in the exact same footprint to sim- AdvancedTCA Zone 2, the product line includes two-pair plify PC board layout and three-pair signal modules, coplanar connectors, and high-speed cable assemblies for use in Zone 3. A mezza- • Optimized footprint supports nine style connector is also available in a four-pair version. quad routing techniques for improved electrical performance, www.tycoelectronics.com/products/atca ease of trace routing, and signifi- www.hmzd.tycoelectronics.com cant PCB manufacturing cost reductions Catalog 1773095 Flyer 1308658 • Designed to meet Telcordia requirements 4 All specifications subject to change. Consult Tyco Electronics for latest specifications.

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA® – Zone 3 Connectors – Z-PACK MAX Z-PACKMAX, from FEATURES: Tyco Electronics, is a new high • High Speed: +10 Gbps speed, 100-Ohm • High Density: 25 pairs/cm Impedance match- [66 pairs/inch] ed backplane con- nector with extreme • 4 and 5 pair per column signal density. This con- • Press-Fit termination nector is designed without ground return shields and can • Without ground blades be pinned out in for lower speed single ended lines too. • Designed to meet Telcordia The connector exists in a 4 and 5 pair per column version requirements for backplane applications. Currently a right-angled male connector is under development for coplanar applications such as Zone 3 in ATCA. www.tycoelectronics.com/products/atca Flyer 2-1773441-5 AdvancedTCA® – Power Connectors – Multi-Beam XL Multi-Beam XL™ is FEATURES: a versatile power interconnection • AC, DC and Signal in same con- system with many nector meeting UL safety require- features, offering ments Design Engineers • 30 amp rating for power and up the most cost effec- to 3 Amps per signal contact tive solution to their power distribution requi- • Three levels of sequencing, Pwr/ rements. The Multi-Beam XL Grnd, Pwr & Signal, Trigger connector is a custom configurable modular design in Signal single piece housing, available in right angle and straight • Unique blade design with mult- versions for both headers and receptacles, solder tail or iple points of contact giving press fit termination. reduced mating forces, contact resistance and temperature rise www.tycoelectronics.com/products/atca www.mbxl.tycoelectronics.com • Floating panel mount and cable to board versions give added flex- Catalog 1773096 ibility in wide variety of applica- Flyer 1308662 / 1654850 / 1654497 / 2-1773441-6 tions All specifications subject to change. Consult Tyco Electronics for latest specifications. 5

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA® – High Speed Mezzanine Connectors – MICTOR The MICTOR pro- FEATURES: duct family is based on the • Designed specifically for high- micro-strip con- speed applications with rise time struction concept, as fast as 50 ps which utilizes two • Controlled Impedance Design rows of signal con- tacts divided by a cen- • 38 to 266 positions, in incre- ter ground plane to en- ments of 38. hance electrical performance. • 23 levels of stack height, from Designed for vertical stacking applications requiring high- 5,00 to 31,90 mm. speed electrical connections to smaller boards containing ASICs, CPUs, I/O devices, or memory. Suited for use as a • Surface mount design high-speed connection between daughter cards. • Redundant mating interface Mezzanine connectors can enable flexible and cost effec- • Polarized housings for correct tive system design through modularization of I/Os, ASICs mating and other high cost components. A wide range of vertical stack heights facilitates flexibility for adding board real • Various packaging styles (Tube, estate within a system. Tape & Reel with or without vacu- um cap) www.tycoelectronics.com/products/atca Catalog 65194 AdvancedTCA® – High Speed Mezzanine Connectors – MICTOR SB MICTOR SB's Con- FEATURES: nector micro-strip construction re- • Integral Ground Bus design sults in a cost • Fully Surface Mountable effective, high- speed, matched • Stack Heights: 5mm to 30mm impedance mezza- • 0.5mm centerline: 60, 120, 180, nine interconnection 240 and 300 signals system with electrical per- formance capability to 6.5 GHz. • 0.8 mm centerline: 40, 80, 120, This latest addition to the MICTOR family of products uses 160 and 200 signals a cost effective Single Beam signal contact. Surface mount • Single Ended, Differential Pair, or lead termination eliminates the need for thru-hole connec- mixed versions within a single tions. This product can be configured for single ended, dif- connector ferential, high density, or mixed configurations. Designed • 50 ohm Impedance for vertical stacking applications requiring high-speed electrical connections to smaller boards containing ASICs, • Electrical performance to 6.5 GHz CPUs, I/O devices or memory. Suited for use as a high- • Location Pegs for placing prod- speed connection between daughter cards. Mezzanine con- uct on PCB nectors can enable flexible and cost effective system design through modularisation of I/Os, ASICs and other • Available in Tray or Tape & Reel high cost components. A wide range of vertical stack packaging heights facilitates flexibility for adding board real estate • High temperature plastic permits within a system. flexibility in reflow www.tycoelectronics.com/products/atca • Caps available for use with vacu- um pick&place Catalog 65194 Flyer 1654710 • Keyed Housing design • Guides available on select versions 6 All specifications subject to change. Consult Tyco Electronics for latest specifications.

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA® – High Speed Mezzanine Connectors – STEP-Z The new STEP-Z FEATURES: connector is a grid array mezza- • Electrical performance to nine connector 10+ Gbps specifically de- • 50 ohm Impedance for Single signed for high- Ended configuration speed and high-den- • 100 ohm Impedance for Diffe- sity applications up to rential Pair configuration 10+ gigabits per second data rates. Pin out patterns for • Various Stack heights ranging either differential pair or single ended applications provide from 15mm through 35mm excellent isolation of high-speed signals. Ground connec- • Connector sizes include 104, tions in close proximity to signal connections enable prop- 200, or 296 signal contacts er electrical coupling throughout the entire interconnect, • SMT BGA board connection on dramatically reducing cross-talk. Ball Grid Array board both connector halves attachment for both connector halves minimizes through hole effects and improves routing. The connector housing • Receptacle contacts completely is polarized to ensure proper mating. protected • Reliable, redundant contact www.tycoelectronics.com/products/atca design on every signal contact Catalog 65194 • Packaging for Trays or Tape & Reel Flyer 1654776-1 • High temperature plastic • Caps for use with vacuum pick & place • Polarized Housing design • Lead free compatible design AdvancedTCA® – Advanced Mezzanine Card (AMC)Connectors Tyco Electronics is FEATURES: developing an Ad- vanced Mezza- • A+, B+, A+B+ styles nine Card (AMC) – Targeted for high-speed differen- connector design- tial applications (3.125 Gb/s to ed to meet the 10+Gb/s): PICMG AMC speci- fication for use with – Precision formed compliant pin AdvancedTCA carrier reduces stub effect and offers boards and other related appli- excellent retention to ensure a cations. The AMC product family from Tyco Electronics will reliable connect include single-part Z-Pluggable connectors in Extended • Suitable for assembly processes (B+ and A+B+) styles as well as a unique A+ style for using flat-rock tooling low-profile applications. www.tycoelectronics.com/products/atca All specifications subject to change. Consult Tyco Electronics for latest specifications. 7

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA® – Front &Rear I/O Connectors – RJ45 Modules Tyco Electronics is FEATURES: developing a line of ATCA Offset • Performance exceeds Near End Stacked Modular Cross-talk (NEXT) requirements Jacks that will of -40 dB on all pair combina- support Rear I/O tions at 100 MHz per EIA/TIA via Rear Transition 568A Modules (RTMs) and • All Offset Stacked Jacks have can be used in Advanc- Category 5 performance edTCA Zone 3. The low profile and narrow width design will allow more ports to be • Meets or exceeds FCC Part 68 packed into less space. The contacts are insert molded for rules and regulations with stan- positive connection throughout the life of the equipment. dard PC board footprints The jacks are designed to be centered vertically on an ATCA panel faceplate. The complete ATCA offset stacked jack product family from Tyco Electronics will include the following configurations: 2x1, 2x4, 2x6, 2x8. www.tycoelectronics.com/products/atca Catalog 82066 Flyer 1773411 AdvancedTCA® – Front & Rear I/O Connectors – SFP Modules The SFP (Small FEATURES: Form-Factor Plug- able) supports • Products according to MSA hot swap of vari- • Uses 20 positions PT connector ous types of fiber optics and copper • Hot Swappable based transceivers • Three stage sequencing into host equipment. This allows the customer • Supports data-rates up to 5 Gbps to have a flexible change • Chassis ground for pass through between different protocols. The different applications are EMI protection to 12.5 Gbps Fiber Channel, Ethernet, Infiniband. SFP board cages exist • Accepts copper and fiber optic in multiple versions that fit ATCA systems. transceivers The one port cages are available in a one piece design • Direct attach copper cable as- (press-fit or solder) and a two piece design (press-fit, semblies available with or with- solder or SMT). Ganged versions (available in 1x6; 1x4; out active equalization. 1x2) are available with or without light pipes. The ganged product has the option of integrated host connector. Tyco is currently developing stacked versions (2x4 as primary option) that fit ATCA requirements. www.tycoelectronics.com/product/atca www.sfp.tycoelectronics.com Catalog 1773408 Flyer 1654720 / 1654095 / 1773078 8 All specifications subject to change. Consult Tyco Electronics for latest specifications.

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA® – Front & Rear I/O Connectors – XFP Modules The XFP Multi- FEATURES: Source Agreement specifies the next • Products according to MSA generation plug- • Uses 30 positions PT connector gable transceiver. The MSA docu- • Hot Swappable ment specifies the • Supports data-rates up to mechanical and electri- 10 Gbps cal requirements for the pluggable modules, cage hard- • EMI controlled by gaskets on the ware, thermal heat sinks and PCB connector. This technol- cage and bezel ogy converts serial electrical signals to external serial • Heat sink designs are specified optical or electrical signals and is intended to be flexible by the customer. Standard heat enough to support OC192/STM-64, 10 G Fibre Channel, sinks available for SAN, PCI and G.709, and 10 G Ethernet. The module design and fore- Networking applications casted volumes are expected to enable very low cost • Accepts copper and fiber optic 10Gb/s solutions. transceivers The XFP module is a hot pluggable, small footprint, serial- • Direct attach copper cable as- to-serial, optical transceiver. It's designed to be data- semblies available with or with- agnostic, providing multi-rate module support for SONET out active equalization. OC-192, 10 Gb/s Ethernet, 10 Gb/s Fibre Channel and G.709 links. Pluggable modules support all data encodings for the above technologies and are expected to be available in single mode or multi-mode serial optical interfaces at 850 nm, 1310 nm, or 1550 nm. www.tycoelectronics.com/products/atca www.xfp.tycoelectronics.com Flyer 1654713 / 1654716 AdvancedTCA® – Front & Rear I/O Connectors – Mini RJ21 Tyco Electronics FEATURES: has developed a high density I/O • 1.5 to 4 times the port density of interconnect, the 2x6 stacked Mod Jack (RJ45). MRJ 21, which 3 times the port density of RJ21 will support Rear • Contact layout and footprint for I/O via Rear Transi- differential pairs creates reduced tion Modules (RTMs) cross-talk and built in compensa- and can be used in tion AdvancedTCA Zone 3. The con- nector is fully shielded and provides density savings for • Connector is designed to meet or current 10/100 or GbE RJ45/RJ21 applications. The low exceed Cat 5e cross-talk profile and narrow width design will allow more ports to be • Fully shielded system to control packed into less space. Tyco offers a full end user solution EMI with cleaner cabling solutions over RJ45s and patch panels for plug and play environment including data centers and • Robust die cast cable covers pro- zone cabled or open office environments. Future configu- vide 45 degrees left or right cable rations include the 1x2 and 1x4, both of which have inte- exit for ease of routing grated magnetics and options for POE enabling pins. This • 1mm pair spacing, 1.5mm pair further reduces board space and offers the user a fully to pair spacing integrated, high density solution. www.tycoelectronics.com/products/atca Catalog 82066 Flyer 1654566 / 1674775 All specifications subject to change. Consult Tyco Electronics for latest specifications. 9

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA® – Front & Rear I/O Connectors – Slim I/O Tyco Electronics is FEATURES: pleased to intro- duce a newly de- • Slim I/O is a hybrid cable connec- signed “SLIM I/O” tor designed for I/O applications cable connector such as: for panel applica- – Power & Signals in one Con- tions. The “Slim I/O” nector connector is specifical- – High-Speed Long-Reach Cable ly designed to enhance the Connector I/O flexibility product line for – Small Form Factor, Slim and Base Transmission Stations (BTS) and other communica- Simple tion applications. The “Slim I/O” connector enables the – Flexible Signal Assignment designer to incorporate Hard Metric packaging practice, in – Optional Passive Equalized Telecommunication and Computer systems as well as Signals instrumentation applications with slot pitch as narrow as • Designed specifically to fit into 15 mm, giving excellent electrical performance and 15mm slot pitch and/or wider mechanical characteristics at an economical price. The “Slim I/O” connector complies with IEC 917 and IEC • Design in accordance with IEC 61076-4-101. It supports applications at data rates of up 917-2-2 and IEC 61076-4-101 to 2.5 Gbps (differential signaling) with edge rates of specs 100psec. Combined with slow signals and power. • Perform well in the Gigabit speeds www.tycoelectronics.com/products/atca • Right Angle Header: – Robust with Good EMI provi- sion for panel cutout – Through Hole/Lead Free soldering – Safe Design • Plug: – Retention – 100N min. – It has polarization features – Accepts cable outer diameters in the range of 6 – 9 mm – Terminate STP, UTP, Coax and Power cable types AdvancedTCA® – Fiber Optic Connectors & Products Fiber Optic Splitter FEATURES: Modules, for mo- nitoring purpos- • Telcordia 1209 and 1221 es, can be sup- compliant passive components plied by Tyco • Customized products Electronics. • Use of high quality industry These cassettes are standard components in a customized and can be robust design used to provide a monitor- • Plug and play ing function on the fiber optic lines of ATCA Racks. • Module tested to IEC standards www.tycoelectronics.com/products/atca www.tycoelectronics.com/fiberoptics Catalog 1307895 Flyer 1773338 / 1773080 10 All specifications subject to change. Consult Tyco Electronics for latest specifications.

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA® – Thermal Products & Services Thermal Interface FEATURES: Products are man- datory for reduc- • Tyco thermal solutions provide ing the waste heat optimum cooling for active com- and cooling the ponents like BGA, MCM modules, system in the most optical modules and power efficient way. Waste devices heat reduces the sili- • Compatible to most ATCA con- con chip reliability and nector form factors, low profile performance. Besides the solutions products Tyco Electronics is offering such as Heat Sinks, • Off the shelf as well as custom- Heat Pipes and Chip Coolers, in all shapes and sizes, Tyco ized products Electronics offers state of the art Thermal Management • Heat pipe technology in combin- Services. Thermal Management is the design practice of ation with passive heat sinks moving waste heat to locations that do not affect the equip- • Advanced thermal conductive ment or overall device performance. Each Thermal Product polymer for weight and cost can be fully customized to fulfill the specific requested sys- reduction tem cooling requirements. • Full CFD (Computational Fluid www.tycoelectronics.com/products/atca Dynamics) simulation and analy- www.thermal.tycoelectronics.com sis, optimum Thermal design numerical and analytical ap- Catalog 1309431 proaches Flyer 1308225 AdvancedTCA® – Cable Connectors & Cable Assemblies Tyco Electronics FEATURES: produces a wide range of standard Being the world largest Cable and custom Cable Assembly manufacturer*, Tyco has Assemblies for use one of the broadest portfolios on in an endless list of Cable Assemblies for the Telecom applications in every and Data Communications Market: industry we serve. • RF Coaxial Cable Assemblies Value-Added Cable Assem- (e.g. SMA, SMC, TNC, QMA, N, blies can be custom designed to 7/16, …) meet customer requirements. To better serve our customers, we offer global manufacturing capabilities for demand fulfil- • High Speed Cable Assemblies ment based on our customers needs. (e.g.HSSDC,SFP,HM-Zd,XFP,...) • High Density Cable Assemblies Tyco Electronics manufacturers a number of components, (e.g. MRJ21, …) which makes it a truly vertically integrated cable assembly manufacturer. • Power Cable Assemblies (e.g. Multi Beam XL, …) With the design and production of bulk cable, connectors, labels, shrink tubes, application machines,…. Tyco • Fiber Optic Cable Assemblies Electronics has its supply chain firmly under control and can (e.g. LC, SC, MT-RJ, MPO, ...) supply the most diverse types of Cable Assemblies. • Standardized Cable Assembly Tyco Electronics CCCE Cable Systems Group (CSG) also types (e.g. IEE1394, USB2.x, strives to support its customer with a tailored logistics solu- S-ATA, …) tion anywhere in the world. Like this lead-times are reduced • Customer / Application Specific to a minimum. With the regionally set-up engineering Cable Assemblies centers, customer specific Cable Assemblies can be * Fleck Research 'Analysis of World- designed in close co-operation with the customer, reducing wide Cable Assemblies' R-1350/05 the time-to-market and production start-up. The High Speed and RF Coaxial Cable Assemblies are designed in co-operation with the connector teams to fine-tune the design for optimum performance. The local Circuit & Design centers contribute to this by supporting the engineering teams. The C&D centers will simulate the designs and feed back the infor- mation so designs can be changed for better High Speed characteristics before going into sampling or production. Once samples are available, the C&D team will conduct validation tests to ensure the per- formance requirements are met. With this set-up, the design of customer specific High Speed solutions is in good hands with Tyco Electronics. www.tycoelectronics.com/products/atca Cable Assemblies for interconnecting the multiple ATCA shelves in a rack, or rack to rack, also can be supplied by Tyco Electronics. Front or Rear I/O Cable Assemblies, interconnecting to an ATCA Blade or Flyer1773079 / 1654713 / 1654850 / 2-1773441-6 / RTM, make the ATCA product offering more than complete. 1654566 / 1654926 All specifications subject to change. Consult Tyco Electronics for latest specifications. 11

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Power Systems (PS) AdvancedTCA® – Power Distribution & Management Modules Tyco Electronics FEATURES: Power Systems introduces indus- • 200 W of power (per PICMG 3.0) try's first power • Inrush control protection input management • Integrated EMI filter designed to solution for ATCA meet CISPR Class B Limits boards. The ATCA power input module • Directive 2002/95/EC RoHS com- (PIM200) is designed in pliant collaboration with industry lead- • 8 W of Isolated auxiliary power ing ATCA board manufacturers and provides innovative supply for IPMI (3.3 V or 5 V) features and compact design. PIM200 modules incorpo- • O-Ring FETs for -48 V A&B feeds rate all the features required by ATCA specifications (PICMG 3.0) and enable designers to save valuable board • A/B feed loss alarm real estate and reduce overall board cost and time to mar- • Hot-swap control ket compared to discrete solutions. • 72 V charging voltage for holdup/ bulk capacitors PIM200 Discrete A Complete Power Architecture • Through-hole and surface mount PICMG 3.0 compliant Yes Board level (SMT) versions Fully tested & burned-in Yes Board level PIM200 series along with Tyco's isolated DC/DC and bus • Input under-voltage and over- Fully qualified Yes Board level converters and point of load modules, provide a complete voltage protections Parts count 1 > 100 and low-cost power architectural solution while complying with AdvancedTCA board power requirements. • Over current and thermal protec- Design-in time Lower Higher tions Assembly cost Lower Higher www.tycoelectronics.com/products/atca Yield/Repair cost Lower Higher • UL/CSA/CE/VDE approved www.power.tycoelectronics.com Time to market Lower Higher (pending) Second sourced Yes No Flyer PIM05-001 Standard off-shelf part Yes No Output Vmg/mt Connector Device Code Input Voltage Comcode Options* Power Output Type PIM200F -48 V (-38 to -75 V DC) 200 W -3.3 V DC Thru Hole 108994471 -S (SMT) PIM200A -48 V (-38 to -75 V DC) 200 W -5.0 V DC Thru Hole 108996288 -S (SMT) 12 All specifications subject to change. Consult Tyco Electronics for latest specifications.

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Power Systems (PS) AdvancedTCA® – Power Distribution & Management Modules (continued) Isolated Bus Converters Full Featured DC-DC Output Output Input Output Efficiency Current Form Connection Base Converter Series Power (W) Current (A) Voltage (V) Voltage (V) (%) Share Factor Type Plate EQW006A0B 72 W 6 A 48 V (36 – 75) 12 V (11.6 – 12.4) 92 % No Eight-Brick TH/SMT No QRW010A0B 120 W 10 A 48 V (36 – 75) 12 V (11.7 – 12.3) 93 % No Qtr-Brick TH Yes QBW018A0B 200 W 18 A 48 V (36 – 75) 12 V (11.4 – 12.6) 94 % Yes Qtr-Brick TH Yes JRB017A0B 200 W 17 A 48 V (36 – 75) 12 V (11.7 – 12.3) 92 % Yes Half-Brick TH Yes Non-Isolated DC-DC Converters Austin Lynx Output Input Voltage Output Voltage Efficiency Output Remote Remote EZ- Connector Series Current (A) Range (V) Range (V) (%) Programmable On/Off Sense Sequence Type Austin MiniLynx 3 A 8.3 – 14 V 0.75 – 5.0 V 91 % Yes Yes No No SIP/SMT Austin MicroLynx 5 A 10 – 14 V 0.75 – 5.0 V 89 % Yes Yes No No SIP/SMT Austin Lynx 10 A 10 – 14 V 0.75 – 5.0 V 93 % Yes Yes Yes No SIP/SMT Austin SuperLynx 16 A 10 – 14 V 0.75 – 5.0 V 92 % Yes Yes Yes No SIP/SMT Austin Lynx II Output Input Voltage Output Voltage Efficiency Output Remote Remote EZ- Connector Series Current (A) Range (V) Range (V) (%) Programmable On/Off Sense Sequence Type Austin MicroLynx II 6 A 8.3 – 14 V 0.75 – 5.0 V 89 % Yes Yes No Yes SIP/SMT Austin Lynx II 10 A 8.3 – 14 V 0.75 – 5.0 V 93 % Yes Yes Yes Yes SIP/SMT Austin SuperLynx II 16 A 8.3 – 14 V 0.75 – 5.0 V 92 % Yes Yes Yes Yes SIP/SMT Austin MegaLynx II 25 A 6.0 – 14 V 0.75 – 5.0 V 92.5 % Yes Yes Yes Yes SIP/SMT All specifications subject to change. Consult Tyco Electronics for latest specifications. 13

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Printed Circuit Group (PCG) AdvancedTCA® – Backplane & Chassis Assemblies Tyco Electronics FEATURES: has introduced a line of backplanes • Electronic packaging solution and chassis as- specialist semblies to meet • 13U 14-slot rack-mount (19" & the requirements 23") ready systems of the PICMG 3.0 specification for ATCA. • Standard and customized ATCA systems: – Dual Star, Full Mesh, and Dual- ATCA Rack-Mount Chassis Dual Star backplanes Our next-generation chassis is 13U high and features a – Redundant, hot-pluggable "push- 14-slot “Dual Star” backplane using Tyco Electronics pull" fan trays HM-Zd connectors and power connectors. Other features include 200 watts/slot cooling, push-pull fan trays with – Redundant, hot-pluggable -48V speed control, -48 V Power Entry Modules, internal or Power Entry Modules external shelf management, and front/rear cabling provi- – Redundant, hot-pluggable Shelf sions. “Full Mesh” backplanes complete the Tyco ATCA- Management Modules Shelf product offering. • Alternate configurations available for onboard shelf management Customized System Design and Manufacturing Services • Cable management schemes for Tyco Electronics is a recognized leader in the design and front/rear assembly of state-of-the-art backplane systems. Our • Design services available world- CompactPCI designs are currently incorporated in two of wide: the industry-leading wireless base station systems. This capability is available to meet your specialized ATCA – Unique Quad-Routing technique requirements. Our engineering group can design and – System modeling and simulation model a system to meet your specifications. Our unique services Quad-Routing technique offers the capability to design – Complete thermal simulation and 5+Gbps backplanes with reduced layer count and reduced testing services cost. – System qualification to industry With the largest printed circuit manufacturing capability in standards North America, we can supply advanced line cards and back-panels for ATCA-based systems. Our assembly facili- – Printed circuits for line cards and ties in North America and Asia can supply systems, back- backplanes planes, and accessories for standard and customized ATCA – Complete chassis assembly ser- designs. vices www.tycoelectronics.com/products/atca – ISO qualified assembly facilities www.printedcircuits.tycoelectronics.com in North America and Asia – Total system support from Tyco Electronics 14 All specifications subject to change. Consult Tyco Electronics for latest specifications.

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA Zone 1 Front Board Connector Right Angle Header Part Number 1766500-1* Backplane Connector Vertical Receptacle Part Number 1766501-1* Front Board Connector Backplane Connector Front Board Connector 46.10 41.30 Right Angle, [1.815]Ref. See Note 1 [1.626]Max. Compliant Press Fit 10.45 1 Part Number 1766500-1* [.411]Max. 333230 28 2275211713 2[.08.2930]Max. [4.1.6800] [5.2.3007] Material and Finish 34 31 29 26242016 Insulators— Thermoplastic, glass 4 reinforced, black, UL94V-0 17.50 28.60 [.689]Max. [1.126] Signal Pins— Copper alloy Max. 18.65 Power Contacts— High conductivity 26.60 [.734] See Note 2 copper alloy, plated 0.00076 [.000030] 23.90 [1.047] min. gold in mating area per [.941] 21.20 TycoElectronics Specification 112-162-5, 18.50 [.835] over 0.00130 [.000050] min. nickel per [.728] 13.70 TycoElectronics Specification 112-25-2 9.40 [.539] Solder Tails— 0.0030 - 0.0043 [.370] 3.00 [.000120 - .000170] tin plated per lead 12.00 [.118] Ø [ .10.3090]26 Plcs. free TycoElectronics Specification [.472] 112-65-1, matt finish Ø [ .10.6630]8 Plcs. [2.0.2807] [3.1.9504] [6.2.6600] 12.47 Notes: [.491] 1. Mounting Holes (Ø 2.00 [.079] x 5.00 [.197] DP) for use with self 4.50 tapping screw (customer supplied). [.177]4.50 2. Positions 1–4 not populated and [.177] Ø 1.70 2.20 6.60 *RroeHseSr vCeodm foprli afuntture use. Ø [ .20.9580]2 P2l.c0s0. 2[.28.8585] 2[. 0P6lc7s]. [.087] 3.90[.260] [.079] 24.50 [.154] 6.00 [.965] [.236] 10.00 [.394] 13.40 [.528] Printed Circuit Layout 14.50 [.571] Backplane Connector 46.10 22.20 Straight, Compliant Press Fit, See Note 2 [1.815]Ref. [.874] 6.02 [1.0.0309] 1 [.237] Part Number 1766501-1* 13 1721 28 30 1[.04.1415]Max. Material and Finish 2[.08.2930]Max. 225627 323334 Insulators— Thermoplastic, glass 16 2024 29 31 reinforced, black, UL94V-0 4 28.60 17.50 Signal Pins— Copper alloy [1.126] [.689]Max. 5.30 Power Contacts— High conductivity Max. 4.60 [.207] [.180] copper alloy, plated 0.0076 [.000030] See Note 1 min. gold in mating area per 3.90 6.00 Ø 2.50 TycoElectronics Specification 112-162-5, [.154] 2.00 [.236] [.098]2 Plcs. over 0.00130 [.000050] min. nickel per 6.60 2.20 [.079] 4.50 TycoElectronics Specification 112-25-2 [.260] [.087] 4.50[.177] 9.59 [.177] Solder tails— 0.0030 - 0.0043 [.378] [.000120 - .000170] tin plated per lead free TycoElectronics Specification Ø 1.60 112-65-1, matt finish 6.60 2.20 10.00 [.063]8 Plcs. Notes: [.260] [.087] [.394] 12.00 1. Mounting Holes (Ø2.00 [.079] x 3.90 Ø 1.00 14.50[.472] 5ta.p0p0i n[.g1 9s7cr] eDwP ()c fuosrt oumsee rw situhp spelielfd). [.154] 2 [6.0 P3l9c]s. [3.1.0108] [.597.410] 2. Positions 1–4 not populated and 13.70 [.370] reserved for future use. Ø [ .10.6795] [.539] 18.50 21.20 [.728] *RoHS Compliant 22.55 [.835] [.888] 23.90 26.60 [.941] Printed Circuit Layout [1.047] All specifications subject to change. Consult Tyco Electronics for latest specifications. 15

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA Zone 2 Front Board Connector 4 Pair Right Angle Receptacle Part Number 6469001-1* Backplane Connector 4 Pair Vertical Header Part Number 6469002-1* 4 Pair Right Angle Front Board Connector Backplane Connector Receptacle Assemblies [2.0.5908]RTyepf.. [0.0.7350]Ref. [1.0.0309 ±± 0.0.1004] [217.0.9908]Ref. 1.50Ref. 19.35 ± 0.08 15.67 ± 0.05 [.059]Typ. [.762 ± .003] [.617 ± .002] 21.35 ± 0.08 [.841 ± .003] 2.20 [.087] 3.00Ref. [.118]Typ. A TDoapu Sghutrefarccaer odf 8[.2.70.00709R]eRf.ef. [1.0.5509]RTyepf.. [3.1.6485]Ref. [.343] 1.50Ref. [.059]Typ. 10.70 ± 0.16 17.20 ± 0.14 [.421 ± .006] [.677 ± .006] 1 All Plated Thru Holes 1.50 ± 0.20 1 PCB Hole Dim. [.059 ± .008] Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010] Finished Hole = 0.60 ± 0.05 [.024 ± .002] Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049] 1.50 SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001] Typ. 2.50 [.059] Note:For finishes other than Typ. [.098] tin-lead, reference Application 9 x 2.50 [.098] = 22.50 [.886] Specification 114-13059. Recommended PC Board Layout Daughter Board, Component Side Shown Application Tooling Module Column Insertion Repair Part Number Count (LDeimng. tAh) Signals Grounds Receptacle Housing Chiclet Removal Removal 16469001-11✱ 10 25.00 80 40 91347-1 1583224-1 1583248-1 .984 6469286-1✱ 12 30.00 96 48 91347-3 1583224-2 1583248-1 1.181 6469294-1✱ 15 37.50 120 60 91347-2 1583224-3 1583248-1 1.476 6469061-1✱ 20 50.00 160 80 91347-4 1583224-4 1583248-1 1.969 1 AdvancedTCAZone 2 Daughtercard Connector. ✱ RoHS Compliant 16 All specifications subject to change. Consult Tyco Electronics for latest specifications.

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) 4 Pair 2.50Ref. Vertical Pin Header [.098]Typ. [2.0.9580]Ref. Assemblies 1.50Ref. [.059]Typ. 5.675Ref. [.223] 23.43 Max. [.922] 3.00Ref. [.118]Typ. 19.65+– 00..2008 [.774+– ..000083] 1.50Ref. [.059]Typ. 0.75Ref. 6.35 2.95 ± 0.05 A [.030] [.250] [.116 ± .002] Ref. 13.40 ± 0.08 [.528 ± .003] 9 x 2.50 [.098] = 22.50 [.886] 2.50 Typ. [.098] 1 PCB Hole Dim. 1.50Typ. Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010] [.059] Finished Hole = 0.60 ± 0.05 [.024 ± .002] Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049] SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001] 1 Note:For finishes other than All Plated Thru Holes tin-lead, reference Application Specification 114-13059. Recommended PC Board Layout Backplane Component Side Shown Application Tooling Mating Module Part Tail Column Insertion Repair Number Length LePnignth Count (LDeimng. tAh) Signals Grounds Pin Pin Housing Pin Header Removal Removal Insertion 16469002-11✱ 2.50 5.30 10 25.00 80 40 91349-1 1583237-1 1583220-1 1583255-1 .098 .209 .984 16469046-12✱ 2.50 5.30 10 25.00 80 40 91349-1 1583237-1 1583220-1 1583255-1 .098 .209 .984 6469074-1✱ 1.80 5.30 10 25.00 80 40 91349-1 1583237-1 1583220-1 1583255-1 .071 .209 .984 6469287-1✱ 2.50 5.30 12 30.00 96 48 91349-3 1583237-1 1583220-1 1583255-1 .098 .209 1.181 6469296-1✱ 2.50 5.30 15 37.50 120 60 91349-2 1583237-1 1583220-1 1583255-1 .098 .209 1.476 6469062-1✱ 2.50 5.30 20 50.00 160 80 91349-4 1583237-1 1583220-1 1583255-1 .098 .209 1.969 6469099-1✱ 1.80 5.30 20 50.00 160 80 91349-4 1583237-1 1583220-1 1583255-1 .071 .209 1.969 1 AdvancedTCAZone 2 Backplane Connector. 2 Shallow Wall for Daughtercards thicker than 3.50 [.138]. ✱ RoHS Compliant All specifications subject to change. Consult Tyco Electronics for latest specifications. 17

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA Guide/ Keying Modules The AdvancedTCA Guide Modules can be used in a wide variety of applications. For motherboard-to- daughtercard applications rA1 A2 (RTM) K1/K2 the vertical pin and right angle socket are used. This popular configuration is further supported by our wide offering of available keying positions. Each of the two keyed guide pins and guide sockets per module can be produced in a variety of different key rK1 A1 A2 positions. For co-planar applications, the right angle guide pins are used along with the right angle guide ATCAName ATCALocation Description Part Number sockets. Both vertical and right angle guide pins are rA1 Backplane 3.00 – 4.0R0e[.a1r1 A8 li–g n.1m5e7n] tP PCoBs tThickness 1469269-2✱ available in short or long rA1 Backplane Rear Alignment Post 1469269-4✱ sizes, to accommodate 4.10 – 6.00[.161 – .236] PCB Thickness being used with different rA1 Backplane Rear Alignment Post 1469269-6✱ 6.10 – 8.00[.240 – .315] PCB Thickness TycoElectronics connectors. A2 (RTM) Rear Transition Module Right Angle Male, Keyed 1-1469372-1✱ K1/K2 Front Board Right Angle Female, Keyed 1-1469373-1✱ K1/K2 Front Board Right Angle Female, Unkeyed Dummy 9-1469373-9✱ rK1 Rear Transition Right Angle Female 1469374-1✱ A1 Backplane Vertical Male, Keyed, Short 1-1469387-1✱ A2 Mid-Plane Vertical Male, Keyed, Long 1-1469388-1✱ ✱ RoHS Compliant 18 All specifications subject to change. Consult Tyco Electronics for latest specifications.

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. Communications, Computer &Consumer Electronics (CC&CE) AdvancedTCA Zone 3 RTM Board Connector 4 Pair Right Angle Header Part Number 6469048-1* Front Board Connector 4 Pair Right Angle Receptacle Part Number 6469001-1* (see page 16) 4 Pair Right Angle Pin Header Assemblies 34.55 2.50 Ref. 1.65 Ref. Ref. [1.360] [.098]Typ. [.065]Typ. 17.32 [.682] 1.50 Ref. Ref. [.059]Typ. 19.65 Ref. [.774] 17.68 23.35 2.20 [.696] [.919]Ref. [.087] Ref. Ref. 3.00 Ref. [.118]Typ. TDoapu Sghutrefarccaer odf [5.2.3009] [2.0.0709] 5[..262735]Ref. A Ref. Ref. 1.50Ref. 6.35 1.50Ref. [.059]Typ. [.250] [.059]Typ. Ref. 10.45 6.90 17.20 Ref. Ref. Ref. [.411] [.272] [.677] 1 All Plated Thru Holes 1.50 ± 0.20 1 PCB Hole Dim. [.059 ± .008] Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010] Finished Hole = 0.60 ± 0.05 [.024 ± .002] Cu Thickness = 0.0375 ± 0.0125 [.00148 ± .00049] 1.50 SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001] 2.50 [.059] Note:For finishes other than [.098]Typ. tin-lead, reference Application 9 x 2.50 [.098] = Specification 114-13059. 22.50 [.886] Recommended PC Board Layout Component Side Shown Application Tooling Mating Module Part Tail Column Insertion Repair Pin Length Signals Grounds Number Length Count Length (Dim. A) Pin Housing Chiclet Header Removal Removal 6469048-1✱ 2.20 5.30 10 25.00 80 40 91378-1 1804174-1 1804177-1 .087 .209 .984 6469375-1✱ 2.20 5.30 12 30.00 96 48 91378-3 1804174-1 1804177-1 .087 .209 1.181 ✱ RoHS Compliant All specifications subject to change. Consult Tyco Electronics for latest specifications. 19

AdvancedTCA® Catalog 1654260-1 The Complete Solution for AdvancedTCA® Issued 10-05. TYCO ELECTRONICS “AT YOUR SERVICE” Need more information? Website Call Technical Support at the numbers listed next page. At www.tycoelectronics.com Technical Support is staffed you’ll find many useful applications and plenty of product information with specialists well versed in · Product News – all Tyco Electronics products. The latest information on new developments from various Tyco Electronics brands. They can provide you with: · Industries – (cid:2) Technical Support Use our industry pages to quickly find the right product for your application. (cid:2) Catalogs ·Products – Discover information on our vast array of products ranging from Amplifiers to Wire &Cable. (cid:2) Technical Documents · Customer Service and Support – (cid:2) Product Samples Find contact numbers for Customer Service and Product Information Help Desks plus (cid:2) Tyco Electronics Authorized FAQs and online technical assistance. Distributor Locations Product Websites www.tycoelectronics.com/products/atca www.tycoelectronics.com www.elastomerictech.com www.power.tycoelectronics.com www.antenna.tycoelectronics.com www.zdok.tycoelectronics.com www.hmzd.tycoelectronics.com www.infiniband.tycoelectronics.com www.mpi.tycoelectronics.com www.thermal.tycoelectronics.com www.zfpio.tycoelectronics.com www.multigigrt.tycoelectronics.com www.sfp.tycoelectronics.com www.xfp.tycoelectronics.com www.dvi.tycoelectronics.com www.elconproducts.com www.expresscard.tycoelectronics.com www.terminators.tycoelectronics.com www.wavecrimp.tycoelectronics.com www.tycoelectronics.com/fiberoptics www.printedcircuits.tycoelectronics.com www.mbxl.tycoelectronics.com Trademarks AMP, AMP NETCONNECT, Austin Lynx, Chip Coolers, Elcon, Mag45, MICTOR, MRJ21, MT-RJ Secure , Multi-Beam XL, Multigig RT, Step-Z, TYCO, Z-DOK, Z-PACK and Z-PACK MAXare trademarks. PICMG (PICMG 3.0), AdvancedMC (AMC), AdvancedTCA (ATCA), AdvancedTCA300 (ATCA300), MicroTCA (µTCA) and CompactPCI are trademarks of PICMG-PCI Industrial Computer Manufacturers Group Incorporated. Infiniband is a trademark of Infiniband Trade Association. © Copyright 2005 by Tyco Electronics Corporation. All International Rights Reserved. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. Disclaimer While Tyco Electronics Corporation and its affiliates referenced herein ("Tyco Electronics") have made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics' only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale, and in no case will Tyco Electronics be responsible for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. Users should independently evaluate the suitability of, and test each product for, their application. The dimensions, specifications, designs, construction, materials and processes in this catalog are for reference purposes only and are subject to change without notice. Please consult Tyco Electronics for the most current product information. The export of certain Tyco Electronics products is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401 et seq.). Orders may be subject to export approval by the U.S. Government. Buyer must comply with all applicable export laws of all applicable jurisdictions. 20 All specifications subject to change. Consult Tyco Electronics for latest specifications.

ATCA Umschlag.qxd4 13.10.2005 16:56 Uhr Seite 3 Global Contacts Americas Argentina– Buenos Aires Chile– Santiago United States Venezuela– Caracas Phone: +54-1-733-2000 Phone: +56-2-739-1230 Harrisburg, PA Phone: +58-2-986-7774 Fax: +54-1-717-0988 Fax: +56-2-739-1227 Phone: +1-717-564-0100 Fax: +58-2-986-9739 Fax: +1-717-986-7575 Brasil– São Paulo Colombia– Bogota For Latin/South American Phone: +55-11-2103-6000 Phone: +57-1-231-9398 Troy, MI Countries not shown Fax: +55-11-2103-6200 Fax: +57-1-240-3769 Phone: +1-248-273-3359 Phone: +54-11-4733-2015 Fax: +1-248-273-3322 Fax: +54-11-4733-2083 Canada– Toronto Mexico– Mexico City Phone: +905-475-6222 Phone: +52-5-729-0400 Customer Service: Fax: +905-474-5520 Fax: +52-5-361-8545 Phone: +1-800-522-6752 Asia/Pacific Australia– Sydney Korea– Seoul People’s Republic of China Singapore– Singapore Phone: +61-2-9554-2600 Phone: +82-2-3415-4500 Hong Kong Phone: +65-480-4525 Fax: +61-2-9502-2556 Fax: +82-2-3486-3810 Phone: +852-2735-1628 Fax: +65-482-1012 Fax: +852-2735-0243 India– Bangalore Malaysia– Selangor Taiwan– Taipei Phone: +91-80-2854-0800 Phone: +60-3-7805-3055 Shanghai Phone: +886-2-2664-9977 Fax: +91-80-2854-0820 Fax: +60-3-7805-3066 Phone: +86-21-6485-7333 Fax: +886-2-2664-9900 Fax: +86-21-6485-6222 Indonesia– Jakarta New Zealand– Auckland Thailand– Bangkok Phone: +62-21-526-7852 Phone: +64-9-634-4580 Phone: +66-2-955-0500 Fax: +62-21-526-7856 Fax: +64-9-634-4586 Fax: +66-2-955-0505 Japan– Kawasaki, Kanagawa Philippines– Makati City Vietnam– Ho Chi Minh City Phone: +81-44-844-8111 Phone: +632-867-8641 Phone: +84-8-930-4547 Fax: +81-44-812-3207 Fax: +632-867-8661 Fax: +84-8-930-3443 Europe/Middle East/Africa Austria– Vienna France Export Divisions– Hungary– Budapest Romania– Bucharest Phone: +43-1-905-60-0 Cergy-Pontoise Cedex Phone: +36-1-289-1000 Phone: +40-21-311-3479+3596 Fax: +43-1-905-60-1333 Phone: +33-1-3420-8866 Fax: +36-1-289-1010 Fax: +40-21-312-0574 Product Information Center: Fax: +33-1-3420-8300 Product Information Center: Russia– Moscow Phone: +43-1-905-60-1249 Phone: +36-1-289-1016 Germany– Bensheim Phone: +7-095-926-55-06…09 Fax: +43-1-905-60-1251 Fax: +36-1-289-1017 Tyco Electronics AMPGmbH Fax: +7-095-926-55-05 Belgium– Kessel-Lo Phone: +49-6251-133-0 Ireland– Dublin Russia– St. Petersburg Phone: +32-16-352-300 Fax: +49-6251-133-1600 Phone: +353-1-820-3000 Phone: +7-812-718-8192 Fax: +32-16-352-352 Product Information Center: Fax: +353-1-820-9790 Fax: +7-812-718-8193 Phone: +49-6251-133-1999 Bulgaria– Sofia Israel– Yokneam Fax: +49-6251-133-1988 Slovenia– Ljubljana Phone: +359-2-971-2152 Phone: +972-4-959-0508 Phone: +386-1561-3270 Fax: +359-2-971-2153 Germany– Niefern Fax: +972-4-959-0506 Fax: +386-1561-3240 Tyco Electronics pretema Czech Republic– Kurim Italy– Collegno (Torino) GmbH &Co. KG South Africa– Port Elizabeth Phone: +420-5-41-162-111 Phone: +39-011-4012-111 Phone: +49-7233-69-0 Phone: +2741-503-4500 Fax: +420-5-41-162-223 Fax: +39-011-4031116 Fax: +49-7233-69-100 Fax: +2741-581-0440 Product Information Center: Product Information Center: Phone: +420-5-41-162-113 Germany– Ottobrunn Phone: +39-011-4012-360 Spain– Barcelona Fax: +420-5-41-162-132 Tyco Electronics RaychemGmbH Fax: +39-011-40287360 Phone: +34-93-291-0330 Phone: +49-89-6089-0 Fax: +34-93-201-7879 Denmark– Glostrup Lithuania– Vilnius Fax: +49-89-6096-345 Phone: +45-43-480-452 Phone: +370-5-2131-402 Sweden– Upplands Väsby Fax: +45-43-441-414 Great Britain– Fax: +370-5-2131-403 Phone: +46-8-50-72-50-00 Stanmore Middlesex Fax: +46-8-50-72-50-01 Egypt– Cairo Netherlands– ’s-Hertogenbosch Phone: +44-8706-080-208 Phone: +20-2-417-76-47 Fax: +44-208-954-6234 Phone: +31-73-6246-246 Switzerland– Steinach Fax: +20-2-419-23-34 Product Information Center: Fax: +31-73-6212-365 Phone: +41-71-447-0447 Finland– Helsinki Freephone GB: 0800-267-666 Product Information Center: Fax: +41-71-447-0444 Phone: +31-73-6246-999 Phone: +358-95-12-34-20 Phone: +44-208-420-8341 Fax: +31-73-6246-998 Turkey– Istanbul Fax: +358-95-12-34-250 +44-208-420-8343 Phone: +90-212-281-8181…3 Fax: +44-208-420-8081 Norway– Nesbru +90-212-282-5130/5430 France– Cergy-Pontoise Cedex Phone: +33-1-3420-8888 Greece– Athens Phone: +47-66-77-88-86 Fax: +90-212-281-8184 Fax: +47-66-77-88-55 Fax: +33-1-3420-8600 Phone: +30-210-9370-396/397 Ukraine– Kiev Product Information Center: Fax: +30-210-9370-655 Poland– Warsaw Phone: +380-44-206-2265 Phone: +33-1-3420-8686 Phone: +48-22-4576-700 Fax: +380-44-206-2264 Fax: +33-1-3420-8623 Fax: +48-22-4576-720 Product Information Center: Phone: +48-22-4576-704 Fax: +48-22-4576-720 http://www.tycoelectronics.com

ATCA Umschlag.qxd4 13.10.2005 16:56 Uhr Seite 4 Tyco Electronics AMP GmbH AMPèrestr. 12–14 • 64625 Bensheim Phone:+49-(0)6251-133-0 Fax: +49-(0)6251-133-1600 www.tycoelectronics.com © 2005 Tyco International 1654260-1 Issued 10-2005 7M ST

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T E Connectivity: 6469002-1