Optical Encoders SERIES 62P Low Cost, PC Mount FEATURES APPLICATION (cid:127) Low Cost (cid:127) Automotive Controls (cid:127) Compact Size (cid:127) White Goods (cid:127) PC Mount (cid:127) Audio (cid:127) No De-Bouncing Required (cid:127) Reliable, Up to 2 Million Cycles (cid:127) Choice of Detent and Pushbutton Force (cid:127) Available in 16 Positions (cid:127) Quadrature Output DIMENSIONS In inches (and millimeters) ±.010 TOLERANCE APPLIES TO ALL DIMENSIONS UNLESS OTHERWISE NOTED (1.400,106) (.1.37863,5504) 6 5 4 (2.1,5040) .201 .655 .525 (9,27).200 .250 (5,14) (16.64) .400 (13,34) (5,08) (6,35) (10,16) 2 P.0L4C2S. O .200 (1,07) .403 p .403 ((51.,560,2885)8) ((11..440000,,223344)) 4( .2P1,0L79C7)S. (.62,6637) (1.0,646(3 4.1P0),67L7 0C8P)SLC.S. PIN DESIG3NAT2ION1 6(1 P0L,2C4S). (1.56,2858) Encodetical and M 6(1 P0L,2C4S). SUGGESTED HOTLEO LLAEYORUATN DCETEA:I L±.002 .2502( .2P1,0L50C4)S. (5.2,0080) rsech (5.2,1042) ((62..21,,35505400)) Ø(4.1,7857±±0.0,10)4 (6,35) (.62.5305±±.00,014) (1.66.5654) .21(19.04±,0.10060)2 anical .156±.004 Ø.375 Ø.375 (5,56±0,1) (3,96±0,1) (9,53) (9,53) .025 X 45° .025 X 45° .325 CHAMFER CHAMFER .660±.015 (8,26) (9.3,2696) (9.3,2696) (8.3,2265) (1.66,6706±±.00 (16,76±0,38) .332 .250 .332 .250 (8,43) (6,35) (8,43) (6,35) .030 .030 (0,76) (0,76) .220 .220 (5,59) (0.0,7360) Ø.059±.002 Ø.059±.002 (0.0,7360) (5,59) (1.77,0708) 4( 0P.0,L93C68)S. .805 (((.182.30,,,355085±1300)),05) .805 (((28..103,,,058353105±))0,05) (1.77,0708) 4( 0P.0,L93C68)S. (20,45) (20,45) CIRCUITRY 150 * POWER (+5.0 V) 1 GROUND 2 10K * OUTPUT B 3 10K * OUTPUT A 4 PUSHBUTTON 5 PUSHBUTTON 6 *10K EXTERNAL PULL-UP RESISTORS REQUIRED ON PIN 3 AND PIN 4 *150 EXTERNAL RESISTOR REQUIRED ON PIN 1 Encoder Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com 5

Optical Encoders WAVEFORM AND TRUTH TABLE Standard Quadrature 2-bit Code 150 * POWER (+5.0 V) 1 HIGH POSITION OUTPUT A OUTPUT B GROUND 2 OUTPUT A #1 10K * LOW OUTPUT B 3 #2 10K * HIGH #3 OUTPUT A 4 OUTPUT B #4 PUSHBUTTON 5 LOW INDICATES LOGIC HIGHCODE REPEATS EVERY FOUR POSITIONS. PUSHBUTTON 6 POS. POS. POS. POS. POS. POS. #1 #2 #3 #4 #5 #6 *10K EXTERNAL PULL-UP RESISTORS REQUIRED ON PIN 3 AND PIN 4 *150 EXTERNAL RESISTOR REQUIRED ON PIN 1 SPECIFICATIONS Mechanical Ratings Test 2: 100g for 6mS, Sawtooth, 9.7 ft/s Electrical Ratings Operating Torque: Materials and Finishes Operating Voltage: 5 Vdc +/-.25 Vdc H: 1.4 in-oz +/- 0.6 in-oz initial Code/Pushbutton Housing: Thermoplastic Supply Current: 30mA maximum at 5 Vdc L: 0.6 in-oz +/- 0.3 in-oz initial Shaft: Thermoplastic Logic High: 3.0V minimum N: ∠0.5 in-oz initial Code/Detent Rotor: Reinforced Logic Low: 1.0V maximum Rotational Life: Thermoplastic Logic Rise and Fall: less than 30 ms H&L: 500,000 cycles Bushing: Thermoplastic N: 2 million cycles Terminal Pins: Brass, Tin plated (1 cycle = 360 degree rotation and return) Detent Spring: Stainless Steel Pushbutton Switch Ratings Shaft Push Out Force: Dome: Stainless Steel Rating: 5.0 Vdc at 10mA resistive O 20 lbs minimum Pushbutton Contact: Nickel plated brass p Contact Resistance: less than 10 ohms tic (TTL or CMOS compatible) Operating Speed: 100 RPM maximum Phototransistor: Planar Silicon a Axial Shaft Play: .010 maximum Detent Balls: Encodel and M VmCooulnttuataaglcleyt BBinroseuuanlakctdeeod:w lepnsa:sr t 2sth5a0n V 4a mc sb eattw meaekne EO-4np0ev°Criar ottoinn 8gm5 T°eCenmtaple rRaatutirne gRsange: .IGn0a6frl2lai5ur emddi a AE.l umSmtiatintineulrem:s sA Srsteeneilde re and less than 10 ms at break sc Storage Temperature Range: Label: h Actuation Life: 3,000,000 operations an Actuation Force: 6: 600 +/- 200 grams -55°C to 100°C White Thermal Transfer Cast Film. ic Relative Humidity: 90-95% at 40°C Adhesive Coated a 4: 450 +/- 150 grams l for 96 hours Bracket: Stainless Steel, Tin plated Shaft Travel: .015 ± .010 inch Vibration Resistance: Harmonic motion with Amplitude of 15g, within a varied 10 to 2000 Hz frequency for 12 hours per MIL-STD-202, Method 204 Mechanical Shock Resistance: Test 1: Tested at 100g for 6mS, half sine, 12.3 ft/s. ORDERING INFORMATION Series Angle of Throw: 22-16 Position (22°) Rotational Torque: N - Non-detent L - Low torque H - High torque Pushbutton Force: 0 - No Pushbutton 4 - 450 grams 6 - 600 grams 6622PPXXXX--XXXXXX Shaft Option: Blank - Standard Ø.187 Shaft S - Ø.250 Shaft Sleeve Encoder 6 Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com