Model 625 HCMOS Clock Oscillator FEATURES • Standard 2.5mm x 2.0mm 4-Pad Surface Mount Package • HCMOS Output • Fundamental and 3rd Overtone Crystal Designs • Frequency Range 1 – 110 MHz • Frequency Stability ±50 ppm Standard, ±25 ppm and ±20 ppm Available • Operating Voltages +1.8Vdc, +2.5Vdc or +3.3Vdc • Operating Temperature to -40°C to +85°C • Output Enable Standard • Tape & Reel Packaging Standard, EIA-418 • RoHS/Green Compliant [6/6] APPLICATIONS Model 625 is ideal for applications; such as broadband access, Ethernet/Gigabit Ethernet, microprocessors/DSP/FPGA, networking equipment computers and peripherals, digital video, cameras and other portable devices. ORDERING INFORMATION 625 M SUPPLY VOLTAGE FREQUENCY IN MHz M = +1.8Vdc M - indicates MHz and decimal point. 2 N = +2.5Vdc L = +3.3Vdc OPERATING TEMPERATURE RANGE FREQUENCY STABILITY A = -10°C to +60°C 6 = ± 20 ppm 1 C = -20°C to +70°C [standard] 5 = ± 25 ppm I = -40°C to +85°C 3 = ± 50 ppm [standard] 1] Consult factory for 6I Stability/Temperature availability. 2] Frequency is recorded with three leading significant digits before the ‘M’ and 5 significant digits after the ‘M’ (including zeros). [Ex. 3.579545 MHz, code as 003M57954; 14.31818 MHz, code as 014M31818; 125 MHz, code as 125M00000] Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. PACKAGING INFORMATION [reference] Device quantity is 1k pcs. minimum and 3k pcs. maximum per 180mm reel. 8mm tape width. Document No. 008-0329-0 Page 1- 3 Rev. C www.ctscorp.com

Model 625 2.5mm x 2.0mm Low Cost HCMOS Clock Oscillator ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT Maximum Supply Voltage V - -0.5 - 4.0 V CC Storage Temperature TSTG - -40 - +100 °C Frequency Range f - 1.0 - 110 MHz O Frequency Stability Δf/f - - - 20, 25, 50 ± ppm [See Note 1 and Ordering Information] O Aging Δf/f @+25°C, 1st year - - 3 ± ppm O Operating Temperature -10 +60 Commercial TA - -20 +25 +70 °C Industrial -40 +85 Supply Voltage Model 625M 1.62 1.8 1.98 V ±10% V Model 625N CC 2.25 2.5 2.75 Model 625L 2.97 3.3 3.63 Supply Current CL = 15pF Model 625M 1.0 MHz to 50 MHz - - 7 [+1.8V] 50.1 MHz to 110 MHz - - 15 S Model 625N ICC 1.0 MHz to 50 MHz - - 10 mA R [+2.5V] 50.1 MHz to 110 MHz - - 15 E T Model 625L 1.0 MHz to 50 MHz - - 15 E M [+3.3V] 50.1 MHz to 110 MHz - - 20 RA Output Load CL - - 15 pF PA Output Voltage Levels AL Logic '1' Level VOH CMOS Load 90%VCC - - V IC Logic '0' Level VOL CMOS Load - - 10%VCC R T Output Current C LE Logic '1' Level [M,N,L] IOH VOH = 90%VCC (1.8V, 2.5, 3.3V) - - -2, -4, -8 mA E Logic '0' Level [M,N,L] IOL VOL = 10%VCC (1.8V, 2.5, 3.3V) - - +2, +4, +8 Output Duty Cycle SYM @ 50% Level 45 - 55 % Rise and Fall Time @ 10% - 90% Levels, C = 15pF L Model 625M 1.0 MHz to 20 MHz - - 5 [+1.8V] 20.1 MHz to 110 MHz - - 4 Model 625N TR, TF 1.0 MHz to 20 MHz - - 4 ns [+2.5V] 20.1 MHz to 110 MHz - - 3 Model 625L 1.0 MHz to 20 MHz - - 3 [+3.3V] 20.1 MHz to 110 MHz - - 2 Start Up Time TS Application of VCC - 2 5 ms Enable Function Enable Input Voltage V Pin 1 Logic '1', Output Enabled 0.7*V - - IH CC V Disable Input Voltage V Pin 1 Logic '0', Output Disabled - - 0.3*V IL CC Enable Time [M,N,L] T Pin 1 Logic '1' - - 5 ms PLZ Standby Current I Pin 1 Logic '0', Output Disabled - - 15 µA ST Period Jitter, pk-pk pjpk-pk - - - 40 Period Jitter, RMS pjrms - - 25 ps Phase Jitter, RMS tjrms Bandwidth 12 kHz - 20 MHz - - 1 Notes: 1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and aging. LVCMOS OUTPUT WAVEFORM TEST CIRCUIT, CMOS LOAD ENABLE TRUTH TABLE PIN 1 PIN 3 Logic ‘1’ Output Open Output Logic ‘0’ High Imp. Document No. 008-0329-0 Page 2 - 3 Rev. C

Model 625 2.5mm x 2.0mm Low Cost HCMOS Clock Oscillator MECHANICAL SPECIFICATIONS PACKAGE DRAWING MARKING INFORMATION 1. XX.XX – Frequency in MHz. 2. C – CTS and Pin 1 identifier. 3. ** - Manufacturing Site Code. 4. D – Manufacturing Date Code. [See Table 1 for codes.] XX.XX 5. Complete CTS part number, frequency value and C**D date code information must appear on reel and carton labels. NOTES 1. Termination pads [e4]. Barrier-plating is nickel [Ni] with gold [Au] flash plate. 2. Reflow conditions per JEDEC J-STD-020; 260°C maximum, 20 seconds. 3. MSL = 1. TABLE I MONTH JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC YEAR 2001 2005 2009 2013 2017 A B C D E F G H J K L M 2002 2006 2010 2014 2018 N P Q R S T U V W X Y Z 2003 2007 2011 2015 2019 a b c d e f g h j k l m 2004 2008 2012 2016 2020 n p q r s t u v w x y z SUGGESTED SOLDER PAD GEOMETRY D.U.T. PIN ASSIGNMENTS CBYPASS should be ≥ 0.01 uF. PIN SYMBOL DESCRIPTION 1 EOH Enable 2 GND Circuit & Package Ground 3 Output RF Output 4 VCC Supply Voltage Document No. 008-0329-0 Page 3 - 3 Rev. C

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: C TS: 625L3C025M00000 625L3C027M00000 625L3C003M68640 625L3C012M00000 625L3C040M00000 625L3C024M57600 625L3C024M00000 625L3C020M00000 625L3C048M00000 625L3C050M00000 625L3C004M00000 625L3C006M00000 625L3C007M37280 625L3C008M00000 625L3C010M00000 625L3C013M00000 625L3C014M31818 625L3C016M00000 625L3C030M00000 625L3C032M00000 625L3I003M68640 625L3I004M00000 625L3I006M00000 625L3I007M37280 625L3I008M00000 625L3I010M00000 625L3I012M00000 625L3I013M00000 625L3I014M31818 625L3I016M00000 625L3I020M00000 625L3I024M00000 625L3I024M57600 625L3I025M00000 625L3I030M00000 625L3I032M00000 625L3I040M00000 625L3I048M00000 625L3I050M00000 625M3I014M31818 625M3I020M00000 625M3I024M00000 625M3I024M57600 625M3I025M00000 625M3I027M00000 625M3I029M49120 625M3I040M00000 625M3I050M00000 625L3I027M00000 625L3I029M49120 625L3C026M00000 625L3I003M20000