Power entry modules without line filter 6250 / 6255 https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole, mates to Felcom C14 See below: Approvals and Compliances 70° C Description Characteristics - Component : - Individual components soldered on a printed circuit board Snap-in version from front side - Plug removal necessary for fuse-link replacement - 2 Functions : - Suitable for use in equipment according to IEC/UL 62368-1 Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm Weblinks 1- or 2-pole pdf data sheet, html datasheet, General Product Information, Approvals, - Meets the requirements of IEC 60335-1 for appliances in unattended Distributor-Stock-Check, Accessories, Detailed request for product use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. - For PCB mounting , fits to Felcom Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz Appliance inlet/-outlet C14 acc. to IEC 60320-1, Ratings UL/CSA 10 A / 250 VAC; 60 Hz UL 60320-1, CSA C22.2 no. 60320-1 Allowable Operation Tempe- -25 °C to 70 °C (for cold conditions) pin-temperature 70 rature °C, 10 A, Protection Class I IP-Protection from front side IP40 acc. to IEC 60529 Fuseholder 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, UL 498, Protection against electric Suitable for appliances with protection for fuse-links 5 x 20 mm shock class I acc. to IEC 61140 Rated Power Acceptance @ 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per Terminal For PCB mounting Ta 23 °C pole Panel Thickness S Snap-in: 1/1.2/1.5/2/2.5/3 mm Power Acceptance @ Ta > Admissible power acceptance at higher Material: Housing Thermoplastic, black, UL 94V-0 23°C ambient temperature see derating cur- ves Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree- ments by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6250 / 6255 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40046421 UL Approvals UL UL File Number: E93617 CCC Approvals CCC CCC Certificate Number: 2018180204007242 Connectors 1

6250 / 6255 Power entry modules without line filter https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video, information technology and office equipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Dimensions [mm] Appliance inlet with fuseholder 15.75 17.25 31.5 2.5 S±0.1 4.8 8 31.5 +00.2 4 30 27.5 14 1.5 0.6 6. +0.227.60 4 6 1. 7. x 8 22.5 3.6 18 0.8 0. 33 21.6 3 9 12.7 4 Appliance inlet with fuseholder 2 Connectors

Power entry modules without line filter 6250 / 6255 https://www.schurter.com /PG05 Derating Curves 1-pole 2-pole 2.0 1.6 n n e i e i 1.4 c c an 1.5 an 1.2 power acceptWatt 1.0 III === 10<..<07 IIInnn power acceptatt per pole 001...680 III === 10<..<07 IIInnn e 0.5 e W 0.4 bl bl ssi ssi 0.2 mi mi d 0.0 d 0.0 A 0 20 40 60 80 100 A 0 20 40 60 80 100 Ambient air temperature Ta °C Ambient air temperature Ta °C All Variants Type Panel Thickness Line Switch Fuseholder Connectors Outlet Order Number s [mm] 6250 / 6255 1 - 1-pole C14 - 6250.5510 6250 / 6255 1 - 2-pole C14 - 6255.5510 6250 / 6255 1.2 - 1-pole C14 - 6250.5512 6250 / 6255 1.2 - 2-pole C14 - 6255.5512 6250 / 6255 1.5 - 1-pole C14 - 6250.5515 6250 / 6255 1.5 - 2-pole C14 - 6255.5515 6250 / 6255 2 - 1-pole C14 - 6250.5520 6250 / 6255 2 - 2-pole C14 - 6255.5520 6250 / 6255 2.5 - 1-pole C14 - 6250.5525 6250 / 6255 2.5 - 2-pole C14 - 6255.5525 6250 / 6255 3 - 1-pole C14 - 6250.5530 6250 / 6255 3 - 2-pole C14 - 6255.5530 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 50 Pcs Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with pro- 4787 tection class I 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for 4788 appliances with protection class I IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 6250 / 6255 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4012 Mounting: Power Supply Cord, 3 x 1 mm², Screw clamps, Connector: IEC C13 4012 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4781 Connector further types to 6250 / 6255 ... 0 2 0 2 8. 0 4. 1 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Connectors 3 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.