Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 IEC Appliance Inlet C14 or C18 with Filter, Protection Degree IP65 into the Appliance, Fuseholder 1- or 2-pole, Front or Rear Mounting IEC connector C14 or C18 with filter Screw-on from front side With V-Lock Connection from front side white white 5707.xxxx.xxx.22 with IP54 V-Lock cord connec- 5707 with IP54 Inlet Gasket tion C14 C18 See below: Approvals and Compliances 70° C 70° C Description Characteristics - Panel mount : - Extreme robust design Screw-on version from front or rear side , Screws with sealing are in- - All single elements are already wired cluded - Screw type fuse carrier, slotted - 4 Functions : - With EMC-shield Appliance Inlet protection class I or II , Line filter in standard and medi- - Especially for applications in rough environments (see technical data) cal version , Fuseholder for fuse-links 5 x 20 mm , IP65 protection into - For applications according IEC/UL 62368-1 we recommend variants the appliance with bleed resistor - For front side mounting versions a sealing kit IP54 for the power supply Suitable for use in medical equipment according to IEC/UL 60601-1 connection is available as an accessory: 4700.0021 Other versions on request - Option suffix ".22" offers IP54 for the power input in combination with - Class X1- and Y1-capacitors for enhanced withstand voltage V-Lock cordsets - Medical Version (M80) - Quick connect terminals 6.3 x 0.8 mm - Additional factory-mounted sealing (IP54) of power input - Version with current rating 3 A Unique Selling Proposition - Sealed power entry module Weblinks - Strong in Design and Safety pdf data sheet, html datasheet, General Product Information, Approvals, - IP 65 protection to the appliance Distributor-Stock-Check, Accessories, Detailed request for product - IP 54 protection to the cord connection Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 1 - 8 A @ Ta 40 °C / 250 VAC; 50 Hz Appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1 Ratings UL/CSA 1 - 8 A @ Ta 40 °C / 250 VAC; 60 Hz UL 498, CSA C22.2 no. 42 (for cold Leakage Current standard < 0.5 mA (250 V / 60 Hz) conditions) pin-temperature 70 °C, 8 A, medical < 5 µA (250 V / 60 Hz) Protection Class I or II Dielectric Strength > 1.7 kVDC between L-N Fuseholder 1-/2-pole, Shocksafe category PC2 > 2.7 kVDC between L/N-PE acc. to IEC 60127-6, Test voltage (2 sec) for fuse-links 5 x 20 mm > 4.0 kVDC Protection class II between Rated Power Acceptance @ 5 x 20: 1.6 W 1-pole/ 1,2 W 2-pole per L/N-PE Ta 23 °C pole Allowable Operation Tempe- -25 °C to 85 °C Power Acceptance @ Ta > Admissible power acceptance at higher rature 23°C ambient temperature see derating cur- Climatic Category 25/085/21 acc. to IEC 60068-1 ves IP-Protection from front side IP65 acc. to IEC 60529 Line Filter Standard and Medical Version, IEC from rear-side IP65 acc. to IEC 60529 60939, UL 1283, CSA C22.2 no. 8 Protection Class Suitable for appliances with protection Technical Details class I or II acc. to IEC 61140 MTBF > 2'800'000 h acc. to MIL-HB-217 F Terminal Quick connect terminals 6.3 x 0.8 mm Panel Thickness S Screw, max 3 mm Mounting screw torque max 0.8 Nm 2 screws M3 with sealing are provided Material: Housing black / white / metallic, UL 94V-0 Approvals and Compliances EMC Products 1

5707 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree- ments by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5707 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40016382 UL Approvals UL UL File Number: E72928 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video, information technology and office equipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. 2 EMC Products

Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Dimensions [mm] Mounting from front side 59.6 36±0.20 3.5 36±0.15 2 R4.5 3 ø 3.2 2 R2.5 +0.202 0 4 3 3 2. 3 ø 3.4 30 R1.5 12 43.6±0.20 0.5 R3.2 29 29.2+ 00.20 51 Mounting from rear side 59.6 36±0.20 3.5 36±0.15 2 R4.5 3 R1 2 R1.5 +0.205 0 4 3 3 3. 5 3 0. ø 3.4 x 3 30 R1.5 12 43.6±0.20 0.5 R3.2 29 30.5+ 00.20 51 Fixing Screws M3 EMC Products 3

5707 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Assembly Instructions Mounting standard version A B C 3/4 3 1 4 1 2 2 2 1 A) front view B) detail front mounting type C) detail rear mounting type 1) sealing of flange 2) sealing of fuseholder 3) sealing of screw hole (front mounting type: sealing ring on screw head) 4) sealing of screw hole (rear mounting type: sealing on screw thread) Important: - use supplied fuse caps (2) and mounting screws (3/4) - optimal sealing requires even and solid panel opening - recommended tightening torque for mounting screws (2/3/4): 0.5-0.8 Nm - IP65 protection between the inlet and connector pins, but no IP rating between the connector pins and the plug of the power cord! Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard version 2 x 12 100 2.2 1 2 Standard version 2 x 5.2 100 2.2 1 4 Standard version 2 x 2 100 2.2 1 6 Standard version 2 x 0.8 100 2.2 1 8 Standard version 2 x 0.4 100 2.2 1 1 Medical Version (M5) 2 x 12 100 - 1 2 Medical Version (M5) 2 x 5.2 100 - 1 4 Medical Version (M5) 2 x 2 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 8 Medical Version (M5) 2 x 0.4 100 - 1 2 Medical Version (M80) 2 x 5.2 100 0.47 1 4 Medical Version (M80) 2 x 2 100 0.47 1 Diagrams Standard version Medical Version (M5) L L' L L' F1 L1 F1 L1 Cy 1) PE R PE' 2) 1) PE R PE' 2) Cx Cx F2 L2 F2 L2 Cy N N' N N' 1) Line 1) Line 2) Load 2) Load 4 EMC Products

Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 Derating Curves 1-pole 2-pole wer Watt 111...624 wer Watt 11..20 sible poance in 001...680 III === 10<..<07 IIInnn sible poance in 000...486 III === 10<..<07 IIInnn Admisaccept 000...2040 20 40 60 80 100 Admisaccept 00..020 20 40 60 80 100 Ambient air temperature Ta °C Ambient Air Temperature Ta °C Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 1 A 2 A 4 A 6 A 8 A Medical version (M5) 1 A 2 A 4 A 6 A 8 A All Variants Rated Cur- Filter-Type Mounting side Cord retai- Protection Class Power Cord Fuseholder Color V-Lock Order Number rent [A] ning kits IP-protection 1 Standard version Front Side - I - 1-pole black 5707.0101.112 1 Standard version Rear Side - I - 1-pole black 5707.0101.113 2 Standard version Front Side - I - 1-pole black 5707.0201.112 EMC Products 5

5707 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rated Cur- Filter-Type Mounting side Cord retai- Protection Class Power Cord Fuseholder Color V-Lock Order Number rent [A] ning kits IP-protection 2 Standard version Rear Side - I - 1-pole black 5707.0201.113 4 Standard version Front Side - I - 1-pole black 5707.0401.112 4 Standard version Rear Side - I - 1-pole black 5707.0401.113 6 Standard version Front Side - I - 1-pole black 5707.0601.112 6 Standard version Rear Side - I - 1-pole black 5707.0601.113 8 Standard version Front Side - I - 1-pole black 5707.0801.112 8 Standard version Rear Side - I - 1-pole black 5707.0801.113 1 Standard version Front Side - I - 2-pole black 5707.0101.312 1 Standard version Rear Side - I - 2-pole black 5707.0101.313 2 Standard version Front Side - I - 2-pole black 5707.0201.312 █ 2 Standard version Rear Side - I - 2-pole black 5707.0201.313 4 Standard version Front Side - I - 2-pole black 5707.0401.312 █ 4 Standard version Rear Side - I - 2-pole black 5707.0401.313 █ 4 Standard version Rear Side - I IP54 2-pole black l 5707.0401.313.22 6 Standard version Front Side - I - 2-pole black 5707.0601.312 6 Standard version Rear Side - I - 2-pole black 5707.0601.313 8 Standard version Front Side - I - 2-pole black 5707.0801.312 █ 8 Standard version Front Side - I IP54 2-pole black 5707.0801.312.01 8 Standard version Rear Side - I - 2-pole black 5707.0801.313 8 Standard version Rear Side - I - 2-pole black l 5707.0801.313.21 1 Medical Version (M5) Front Side - I - 2-pole black 5707.0103.312 1 Medical Version (M5) Rear Side - I - 2-pole black 5707.0103.313 1 Medical Version (M5) Rear Side - I - 2-pole black l 5707.0103.313.21 2 Medical Version (M5) Front Side - I - 2-pole black 5707.0203.312 2 Medical Version (M5) Rear Side - I - 2-pole black 5707.0203.313 2 Medical Version (M5) Rear Side - I - 2-pole black l 5707.0203.313.21 4 Medical Version (M5) Rear Side - I IP54 2-pole black l 3-100-897 4 Medical Version (M5) Front Side - I - 2-pole black 5707.0403.312 4 Medical Version (M5) Rear Side - I - 2-pole black 5707.0403.313 █ 4 Medical Version (M5) Rear Side - I - 2-pole black l 5707.0403.313.21 6 Medical Version (M5) Front Side - I - 2-pole black 5707.0603.312 6 Medical Version (M5) Rear Side - I - 2-pole black 5707.0603.313 6 Medical Version (M5) Rear Side - I - 2-pole black l 5707.0603.313.21 6 Medical Version (M5) Front Side - I - 2-pole white 5707.0613.312 6 Medical Version (M5) Front Side - I - 2-pole white l 5707.0613.312.21 6 Medical Version (M5) Rear Side - I - 2-pole white 5707.0613.313 6 Medical Version (M5) Rear Side - I - 2-pole white l 5707.0613.313.21 8 Medical Version (M5) Front Side - I - 2-pole black 5707.0803.312 8 Medical Version (M5) Front Side - I IP54 2-pole black l 5707.0803.312.22 8 Medical Version (M5) Rear Side - I - 2-pole black 5707.0803.313 8 Medical Version (M5) Rear Side - I - 2-pole black l 5707.0803.313.21 1 Medical Version (M5) Front Side - II - 2-pole black 5707.0103.412 1 Medical Version (M5) Rear Side - II - 2-pole black 5707.0103.413 2 Medical Version (M5) Front Side - II - 2-pole black 5707.0203.412 2 Medical Version (M5) Rear Side - II - 2-pole black 5707.0203.413 4 Medical Version (M5) Front Side - II - 2-pole black 5707.0403.412 4 Medical Version (M5) Rear Side - II - 2-pole black 5707.0403.413 6 EMC Products

Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 Rated Cur- Filter-Type Mounting side Cord retai- Protection Class Power Cord Fuseholder Color V-Lock Order Number rent [A] ning kits IP-protection 6 Medical Version (M5) Front Side - II - 2-pole black 5707.0603.412 6 Medical Version (M5) Rear Side - II - 2-pole black 5707.0603.413 8 Medical Version (M5) Front Side - II - 2-pole black 5707.0803.412 8 Medical Version (M5) Rear Side - II - 2-pole black 5707.0803.413 2 Medical Version (M80) Front Side - I IP54 2-pole black 5707.0205.312.01 4 Medical Version (M80) Rear Side - I IP54 2-pole black 3-121-413 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 10 Pcs Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0047 RC320 Rear Cover for Power Entry Module Mating Outlets/Connectors Category / Description Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4012 Mounting: Power Supply Cord, 3 x 1 mm², Screw clamps, Connector: IEC C13 4012 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4781 Connector further types to 5707 ... EMC Products 7

5707 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black 6007.0204 Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214 Interconnection Cord further types to 5707 Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0224 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0214 Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6044.0215 Power Supply Cord further types to 5707 ... Power Supply or Interconnection Cord Overview complete Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black 6044.0204 Power Supply or Interconnection Cord further types to 5707 Mating Outlets/Connectors shuttered Connector Overview complete 4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4783 Connector further types to 5707 Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white VAC17KS Power Cord further types to 5707 0 2 0 2 2. 1 0. 1 The specifications, descriptions and illustrations indicated in this document are based on current 8 EMC Products information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.