2mm ® LED CBI Circuit Board Indicator (DIN 41494 Compatible), Tri-Level 570-0100-xxx PART NO. COLOR* [5.2.0080] [1.0.5620] 12.85 [.506] 570-0100-111 Red–Red–Red 570-0100-132 Red–Yellow–Green 1.80 [.071] 570-0100-222 Green–Green–Green 3.30 [.130] 570-0100-333 Yellow–Yellow–Yellow 10.16 [.400] [3.1.3300] * Top-Middle-Bottom LED 1.78 [.070] 3.20 ANODE [.01.64]1 SQ. 3 [.126] 0.46 [.018] 6.84 [.269] TOP .4 2.54 Ø 2.54 2.54 LED [.017] [.100] 0.965 ±.05 [.100] [.100] REF [.038±.002] RECOMMENDED 2.54 P.C. BOARD [.100] LAYOUT 2.54 [.100] Dimensions in mm [inches] Features Custom Combinations (cid:127) Designed to accommodate DIN 41494 (cid:127) Contact factory for information on custom color (cid:127) Multiple CBIs form horizontal LED arrays on 5.08mm combinations. (0.200”) center-lines (cid:127) High Contrast, UL94 V-0 rated, black housing EXAMPLE OF PART NUMBER ORDERING CODE (cid:127) Oxygen index: 29% (cid:127) Polymer content: PBT, 0.595 g Series Top LED Color (cid:127) Housing stand-offs facilitate PCB cleaning 5 7 0 - 0 1 0 0 - x x x (cid:127) Solderability per MIL-STD-202F, method 208F Middle LED Color Bottom LED (cid:127) LEDs are safe for direct viewing per IEC 825-1, Color EN- 60825-1 LED colors: 0) Blank 1) Red 2) Green 3) Yellow Tolerance note: As noted, otherwise: (cid:127) LEDProtrusion: ±0.04 mm [±0.016] (cid:127) CBIHousing: ±0.02mm[±0.008] Typical Operating Characteristics (TA= 25°C) See LED data sheet for additional information GENERAL PURPOSE See Page 3-17 and 3-18 for Reference Only LED Drive Circuit Examples See Page 3-19 for Pin Out Peak IV* VF** Viewing LED Part Number Color Wavelength nm mcd Volts Angle 2ΘΘ1/2 Data sheet Page # Red 635 12.6 2 38° 521-9630 3-13 570-0100-xxx Green 565 8.7 2.1 38° 521-9632 3-13 Yellow 585 12.6 2.1 38° 521-9631 3-13 * I = 10 mA **I = 20 mA F F Dialight Corporation (cid:127)1501 Route 34 South (cid:127)Farmingdale, NJ 07727 (cid:127)TEL: (732) 919-3119 (cid:127)FAX: (732) 751-5778 w(cid:127) ww.dialight.co m 3-11

2mm Discrete LED Diffused 521-9630, -9631, -9632 CATHODE I.D. PART NO. COLOR 2.40 [.095] 2.90 25.40 .40 [.114] [1.00] MIN 1[..0040] [.T0Y1P6] 521-9630 Red CATHODE MIN 521-9631 Yellow 3[..1330] [1.0.8701] [.T.04Y15P8] N2[.O.150M4] 521-9632 Green 1.52 R 1.65 [.060] 1.50 [.059] MAX [.065] 3.30 [.130] 3 Dimensions in mm [inches] Red Yellow Green ABSOLUTE MAXIMUM RATINGS (T =25°C) -9630 -9631 -9632 A Power Dissipation (mW) 100 60 100 Forward Current (mA) 30 20 30 Derating (mA/°C) From 25°C .4 .25 .4 Peak Current (mA) 120 80 120 Pulse width = 10µs Operating Temperature (°C) -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Red Yellow Green OPERATING CHARACTERISTICS (T =25°C) -9630 -9631 -9632 A Luminous Intensity (mcd) Min. 3.7 3.7 2.5 IF=10mA Typical 12.6 12.6 8.7 Peak Wavelength (nm) Typical 635 585 565 λ Peak Viewing Angle (2ΘΘ/) Typical 38° 38° 38° 12 Forward Voltage (V) Typical 2 2.1 2.1 IF=20mA Max. 2.8 2.8 2.8 Reverse Voltage (V), IR=100µA Min. 5 5 5 Θ 1¼2is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation (cid:127)1501 Route 34 South (cid:127)Farmingdale, NJ 07727 (cid:127)TEL: (732) 919-3119 (cid:127)FAX: (732) 751-5778 w(cid:127) ww.dialight.co m 3-13

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: D ialight: 570-0100-333F 570-0100-111F