Power Entry Modules with Line Filter 5200 https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Fuseholder 1-pole Screw-on from front side Snap-in mounting from front side Type 5200, Fuseholder 1-pole with spare com- Type 5200, Fuseholder 1-pole with spare com- partment partment Screw-On Version Snap-In Version C14 See below: Approvals and Compliances 70° C Description Characteristics - Panel mount : - All single elements are already wired Snap-in or screw-on mounting from front side - Plug removal necessary for fuse-link replacement - 3 Functions : - For applications according IEC/UL 62368-1 we recommend variants Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm with bleed resistor 1-pole , Line filter in standard and medical version Suitable for use in medical equipment according to IEC/UL 60601-1 - V-Lock notch standard Other versions on request - Quick connect terminals 6.3 x 0.8 mm - Medical Version (M80) Unique Selling Proposition References - Ultra-compact design Alternative: version without line filter 6200 - Recessed faston connectors Alternative: Standard version - High quality filter case made of stainless steel Weblinks - Highly resistant since potted filter pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz Appliance inlet/-outlet C14 acc. to IEC 60320-1, Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 250 VAC; 60 Hz UL 498, CSA C22.2 no. 42 (for cold Leakage Current standard < 0.5 mA (250 V / 60 Hz) conditions) pin-temperature 70 °C, 10 A, medical < 5 µA (250 V / 60 Hz) Protection Class I Dielectric Strength > 1.7 kVDC between L-N Fuseholder 1-pole, Shocksafe category PC2 acc. to > 2.7 kVDC between L/N-PE IEC 60127-6, Test voltage (2 sec) for fuse-links 5 x 20 mm Allowable Operation Tempe- -25 °C to 85 °C Rated Power Acceptance @ 5 x 20: 2 W (1 pole) rature Ta 23 °C Climatic Category 25/085/21 acc. to IEC 60068-1 Power Acceptance @ Ta > Admissible power acceptance at higher IP-Protection from front side IP40 acc. to IEC 60529 23°C ambient temperature see derating cur- ves Protection Class Suitable for appliances with protection class I acc. to IEC 61140 Line Filter Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Terminal Quick connect terminals 6.3 x 0.8 mm Technical Details Panel Thickness S Screw: max 8 mm MTBF > 2'300'000 h acc. to MIL-HB-217 F Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 3 mm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree- ments by SCHURTER. EMC Products 1

5200 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5200 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 101307 UL Approvals UL UL File Number: E72928 CQC Approvals CQC CQC Certificate Number: CQC18001210262 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video, information technology and office equipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Medical Technology SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products

Power Entry Modules with Line Filter 5200 https://www.schurter.com /PG06 Dimension [mm] Screw-on mounting type 5200 2.5 M3 5 3. ø 0˚ 9 6 4 6.3x max.R3 +0.509 0 6 3 4 ø 2 3 +0.2 34 43.7 5 32 0 Snap-in mounting type 5200 3.5 0 2 max.R3 0.0 6 +9 3 2 +0.20 34 43.7 5 32 0 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard version 2 x 11 47 2.2 - 2 Standard version 2 x 4 47 2.2 - 4 Standard version 2 x 1.6 47 2.2 - 6 Standard version 2 x 0.7 47 2.2 - 8 Standard version 2 x 0.6 47 2.2 - 10 Standard version 2 x 0.4 47 2.2 - 1 Medical Version (M5) 2 x 11 47 - 1 2 Medical Version (M5) 2 x 4 47 - 1 4 Medical Version (M5) 2 x 1.6 47 - 1 6 Medical Version (M5) 2 x 0.7 47 - 1 8 Medical Version (M5) 2 x 0.6 47 - 1 10 Medical Version (M5) 2 x 0.4 47 - 1 10 Standard and Medical Version 2 x 11 47 2.2 1 EMC Products 3

5200 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Diagrams 5200 Standard Version 5200 Medical Version (M5) L L’ L L’ F1 L1 F1 L1 Cy 1) PE PE’ 2) 1) PE R PE’ 2) Cx Cx L2 L2 Cy N N’ N N’ 1) Line 1) Line 2) Load 2) Load Derating Curves 1-pole 2.0 er att wW 1.5 sible poance in 1.0 III === 10<..<07 IIInnn misept 0.5 Adacc 0.00 20 40 60 80 100 Ambient air temperature Ta °C Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 1 A 2 A 4 A 6 A 8 A 10 A 4 EMC Products

Power Entry Modules with Line Filter 5200 https://www.schurter.com /PG06 Medical version (M5) 1 A 2 A 4 A 6 A 8 A 10 A All Variants Rated Current Filter-Type Panel mounting Fuseholder Order Number [A] 1 Standard version Snap-in 1-pole 5200.0143.1 █ 2 Standard version Snap-in 1-pole 5200.0243.1 █ 4 Standard version Snap-in 1-pole 5200.0443.1 █ 6 Standard version Snap-in 1-pole 5200.0643.1 █ 8 Standard version Snap-in 1-pole 5200.0843.1 10 Standard version Snap-in 1-pole 5200.1043.1 █ 1 Standard version Screw 1-pole 5200.0123.1 █ 2 Standard version Screw 1-pole 5200.0223.1 █ 4 Standard version Screw 1-pole 5200.0423.1 █ 6 Standard version Screw 1-pole 5200.0623.1 █ 8 Standard version Screw 1-pole 5200.0823.1 10 Standard version Screw 1-pole 5200.1023.1 █ 1 Medical Version (M5) Snap-in 1-pole 5200.0143.3 2 Medical Version (M5) Snap-in 1-pole 5200.0243.3 4 Medical Version (M5) Snap-in 1-pole 5200.0443.3 6 Medical Version (M5) Snap-in 1-pole 5200.0643.3 8 Medical Version (M5) Snap-in 1-pole 5200.0843.3 10 Medical Version (M5) Snap-in 1-pole 5200.1043.3 1 Medical Version (M5) Screw 1-pole 5200.0123.3 2 Medical Version (M5) Screw 1-pole 5200.0223.3 4 Medical Version (M5) Screw 1-pole 5200.0423.3 6 Medical Version (M5) Screw 1-pole 5200.0623.3 █ 8 Medical Version (M5) Screw 1-pole 5200.0823.3 10 Medical Version (M5) Screw 1-pole 5200.1023.3 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check- SCHURTER Packaging unit 10 Pcs EMC Products 5

5200 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Accessories Description Assorted Covers Rear Cover 0859.0047 Cord retaining kits Cord retaining strain relief Countersunk, B 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with pro- 4787 tection class I 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for 4788 appliances with protection class I IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 5200 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4012 Mounting: Power Supply Cord, 3 x 1 mm², Screw clamps, Connector: IEC C13 4012 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4781 Connector further types to 5200 ... Mating Outlets/Connectors shuttered Connector Overview complete 4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4783 Connector further types to 5200 0 2 0 2 5. 0 2. 1 The specifications, descriptions and illustrations indicated in this document are based on current 6 EMC Products information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S churter: 5200.1023.3 5200.1023.1 5200.1043.1 5200.0143.1 5200.0423.1 5200.0623.1 5200.0643.1 5200.0123.1 5200.0443.3 5200.0443.1 5200.0123.3 5200.0143.3 5200.0223.3 5200.0243.3 5200.0423.3 5200.0423.5 5200.0623.3 5200.0823.1 5200.1043.3 5200.0643.3 5200.0843.1 5200.0243.1 5200.0223.1 5200.0823.3