LUMOTAST 25 1 LUMO 25 General data LUMOTAST 25 pushbutton range • Illuminable pushbuttons and signal lamps. Please order lamps/LEDs separately. • Mounting hole diameter: 16.2 mm • 42 V/100 mA max. • Water-jet proof IP65 • Low profile • Lamp socket Bi-Pin T 1 for LEDs and filament lamps • Keyed socket connector and flat ribbon cable or PCB plug-in socket • Ring nut or click fixing method. Content LUMOTAST 25 illuminated pushbutton 1 - 22 LUMOTAST 25 illuminated pushbutton with flush lens, „Click“ quick-assembly feature 1 - 24 LUMOTAST 25 illuminated pushbutton with flush lens, ring nut fixing 1 - 24 LUMOTAST 25 illuminated pushbutton with protruding lens, „Click“ quick-assembly feature 1 - 25 LUMOTAST 25 illuminated pushbutton with protruding lens, ring nut fixing 1 - 25 LUMOTAST 25 illuminated pushbutton with protruding collar, „Click“ quick-assembly feature 1 - 26 LUMOTAST 25 illuminated pushbutton with protruding collar, ring nut fixing 1 - 26 LUMOTAST 25 selector switch 1 - 28 LUMOTAST 25 selector switch, „Click“ quick-assembly feature 1 - 29 LUMOTAST 25 selector switch, ring nut fixing 1 - 29 LUMOTAST 25 keylock switch 1 - 30 LUMOTAST 25 keylock switch 1 - 31 LUMOTAST 25 emergency stop pushbutton 1 - 32 LUMOTAST 25 emergency stop pushbutton, ring nut fixing 1 - 33 LUMOTAST 25 signal lamp 1 - 34 LUMOTAST 25 signal lamp, 24 V, „Click“ quick-assembly feature 1 - 36 LUMOTAST 25 signal lamp, 24 V, ring nut fixing 1 - 36 Pushbuttons Stock items are marked 1 - 19 by bold printedorder numbers.

LUMOTAST 25 Series LUMOTAST25 16.2 mm mounting hole diameter 1 Design Click-Version LUMO 25 1. As delivered 2. Insert pushbutton in hole 3. Actuate once 4. Insert connector with flat-ribbon cable Disassembly Click-Version Click-Version from front (only for pushbuttons and signal lamps with special tool for dismounting) 1. Grip body/lens 2. Pull out body/lens 3. Release click lever 4. Pull out pushbutton/signal lamp with cable 1 - 20 Pushbuttons

LUMOTAST 25 Dimensional drawing With quick connector and flat-ribbon cable Connection diagram (PCB top view) 1 LUMO 25 1 + 4 = pushbutton connection 2 + 3 = lamp connection With plug-in socket Plug-in socket for PCB Front panel top view PCB top view PCB hole diagram 1+4 contact connection 2+3 lamp connection Pushbuttons 1 - 21

LUMOTAST 25 LUMOTAST 25 illuminated pushbutton 1 Pict.: colourless Pict.: blue Panel cut-out Technical data LUMO 25 General information Electrical characteristics Form of lens see order block Rated voltage AC/DC max. 42 V Colour of lens see order block Rated voltage AC/DC min. 0.02 V Form of collar square Rated current AC/DC max. 100 mA Rated current AC/DC min. 0.01 mA Dimensions Contact resistance max. 100 mΩ Length of collar 25 mm Bouncing time max. 5 ms Width of collar 25 mm Overall height 7.1 mm Other specifications Mounting depth with Operating life connector 30.7 mm (operations) 1000000 Mounting depth with Degree of protection plug-in socket 33.4 mm from front side IP65 Mounting hole 16.2 mm Ambient temp. operating without lamp min. -25 °C Mechanical design Ambient temp. operating Mounting see order block without lamp max. +70 °C Terminals pin connector 4-pol./ Ambient temp. operating plug-in socket with lamp min. -25 °C Contact system snap-action contact Ambient temp. operating Contact function momentary with lamp max. +55 °C Contact arrangement 1 NO Storage temperature min. -40 °C Contact materials Au Storage temperature max. +80 °C Illuminability yes Resistance to constant Lamp socket Bi-Pin T 1/T 11/ environment acc. to IEC 600 68-2-3 and 4 2-30 Mechanical characteristics Resistance at variable Operating force max. 6 N environment acc. to IEC 600 68-2-14 and Operating travel 3 mm 2-33 Switching travel 2 mm Weight 7 g Robustness min. 100 N Accessories LUMOTAST 25 illuminated pushbutton Description Photo Order no. Page Filament lamp, Bi-Pin T 11/ base, 12 V 1.90.180.474/0000 5 - 5 4 Filament lamp, Bi-Pin T 11/ base, 28 V 1.90.180.475/0000 5 - 5 4 LED Bi-Pin T 1 superbright, red, 24 V 1.90.690.351/0000 5 - 18 1 - 22 Stock items are marked Pushbuttons by bold printedorder numbers.

LUMOTAST 25 Accessories LUMOTAST 25 illuminated pushbutton Description Photo Order no. Page LED Bi-Pin T 1 superbright, green, 24 V 1.90.690.352/0000 5 - 18 1 LED Bi-Pin T 1 superbright, yellow, 24 V 1.90.690.353/0000 5 - 18 LED Bi-Pin T 1 superbright, blue, 24 V 1.90.690.354/0000 5 - 18 LED Bi-Pin T 1 superbright, white, 24 V 1.90.690.355/0000 5 - 18 LED Bi-Pin T 1, red, 3 V 1.90.691.026/0000 5 - 17 LED Bi-Pin T 1, green, 3 V 1.90.691.027/0000 5 - 17 LUMO 25 LED Bi-Pin T 1, yellow, 3 V 1.90.691.028/0000 5 - 17 Plug-in socket for PCB 5.00.645.036/0000 5 - 28 Cable (flat ribbon cable 10 cm with socket connector and 5.03.771.306/0000 5 - 27 male quick connector, AMP 4-pin) Disassembly tool for LUMOTAST 25, RAFIX 16 5.05.800.042/0000 5 - 26 Blanking cap complete with sealing disc and ring nut, 5.05.800.049/0100 5 - 33 square Label holder, flush, for square collar 5.07.620.004/0000 2 - 76 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 27 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Legend insert for illuminated versions 5.70.635.000/2000 Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 2 - 76 Socket connector, 4-pin 5.92.025.368/0000 5 - 26 Pushbuttons Stock items are marked 1 - 23 by bold printedorder numbers.

LUMOTAST 25 LUMOTAST 25 illuminated pushbutton with flush lens, "Click" quick-assembly feature 1 Pict.: colourless Panel cut-out Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts Housing Lens momentary 1 NO transparent 1.15.150.006/1002 1.15.150.506/0000 5.49.077.011/1002 colourless momentary 1 NO transparent red 1.15.150.006/1306 1.15.150.506/0000 5.49.077.011/1306 LUMO 25 momentary 1 NO transparent yellow 1.15.150.006/1403 1.15.150.506/0000 5.49.077.011/1403 momentary 1 NO transparent green 1.15.150.006/1505 1.15.150.506/0000 5.49.077.011/1505 momentary 1 NO transparent blue 1.15.150.006/1607 1.15.150.506/0000 5.49.077.011/1607 Technical data see page 1 - 22 Accessories: Legend insert for illuminated versions:5.70.635.000/2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side. LUMOTAST 25 illuminated pushbutton with flush lens, ring nut fixing Pict.: green Panel cut-out Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts Housing Lens momentary 1 NO transparent 1.15.150.056/1002 1.15.150.556/0000 5.49.077.011/1002 colourless momentary 1 NO transparent red 1.15.150.056/1306 1.15.150.556/0000 5.49.077.011/1306 momentary 1 NO transparent yellow 1.15.150.056/1403 1.15.150.556/0000 5.49.077.011/1403 momentary 1 NO transparent green 1.15.150.056/1505 1.15.150.556/0000 5.49.077.011/1505 momentary 1 NO transparent blue 1.15.150.056/1607 1.15.150.556/0000 5.49.077.011/1607 Technical data see page 1 - 22 Accessories: Legend insert for illuminated versions:5.70.635.000/2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side. 1 - 24 Stock items are marked Pushbuttons by bold printedorder numbers.

LUMOTAST 25 LUMOTAST 25 illuminated pushbutton with protruding lens, "Click" quick-assembly feature 1 Pict.: red Panel cut-out Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts Housing Lens momentary 1 NO transparent 1.15.150.106/1002 1.15.150.606/0000 5.49.077.012/1002 colourless momentary 1 NO transparent red 1.15.150.106/1306 1.15.150.606/0000 5.49.077.012/1306 LUMO 25 momentary 1 NO transparent yellow 1.15.150.106/1403 1.15.150.606/0000 5.49.077.012/1403 momentary 1 NO transparent green 1.15.150.106/1505 1.15.150.606/0000 5.49.077.012/1505 momentary 1 NO transparent blue 1.15.150.106/1607 1.15.150.606/0000 5.49.077.012/1607 Technical data see page 1 - 22 Accessories: Legend insert for illuminated versions:5.70.635.000/2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side. LUMOTAST 25 illuminated pushbutton with protruding lens, ring nut fixing Pict.: blue Panel cut-out Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts Housing Lens momentary 1 NO transparent 1.15.150.156/1002 1.15.150.656/0000 5.49.077.012/1002 colourless momentary 1 NO transparent red 1.15.150.156/1306 1.15.150.656/0000 5.49.077.012/1306 momentary 1 NO transparent yellow 1.15.150.156/1403 1.15.150.656/0000 5.49.077.012/1403 momentary 1 NO transparent green 1.15.150.156/1505 1.15.150.656/0000 5.49.077.012/1505 momentary 1 NO transparent blue 1.15.150.156/1607 1.15.150.656/0000 5.49.077.012/1607 Technical data see page 1 - 22 Accessories: Legend insert for illuminated versions:5.70.635.000/2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side. Pushbuttons Stock items are marked 1 - 25 by bold printedorder numbers.

LUMOTAST 25 LUMOTAST 25 illuminated pushbutton with protruding collar, "Click" quick-assembly feature 1 Pict.: colourless Panel cut-out Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts Housing Lens momentary 1 NO transparent 1.15.150.206/1002 1.15.150.706/0000 5.49.077.011/1002 colourless momentary 1 NO transparent red 1.15.150.206/1306 1.15.150.706/0000 5.49.077.011/1306 LUMO 25 momentary 1 NO transparent yellow 1.15.150.206/1403 1.15.150.706/0000 5.49.077.011/1403 momentary 1 NO transparent green 1.15.150.206/1505 1.15.150.706/0000 5.49.077.011/1505 momentary 1 NO transparent blue 1.15.150.206/1607 1.15.150.706/0000 5.49.077.011/1607 Technical data see page 1 - 22 Accessories: Legend insert for illuminated versions:5.70.635.000/2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side. LUMOTAST 25 illuminated pushbutton with protruding collar, ring nut fixing Pict.: yellow Panel cut-out Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts Housing Lens momentary 1 NO transparent 1.15.150.256/1002 1.15.150.756/0000 5.49.077.011/1002 colourless momentary 1 NO transparent red 1.15.150.256/1306 1.15.150.756/0000 5.49.077.011/1306 momentary 1 NO transparent yellow 1.15.150.256/1403 1.15.150.756/0000 5.49.077.011/1403 momentary 1 NO transparent green 1.15.150.256/1505 1.15.150.756/0000 5.49.077.011/1505 momentary 1 NO transparent blue 1.15.150.256/1607 1.15.150.756/0000 5.49.077.011/1607 Technical data see page 1 - 22 Accessories: Legend insert for illuminated versions:5.70.635.000/2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side. 1 - 26 Stock items are marked Pushbuttons by bold printedorder numbers.

LUMOTAST 25 LUMOTAST 25 selector switch 1 Panel cut-out Technical data LUMO 25 General information Electrical characteristics Form of lens handle Rated voltage AC/DC max. 42 V Colour of handle black opaque Rated voltage AC/DC min. 0.02 V Form of collar square Rated current AC/DC max. 100 mA Rated current AC/DC min. 0.01 mA Dimensions Contact resistance max. 100 mΩ Length of collar 25 mm Bouncing time max. 5 ms Width of collar 25 mm Overall height 17 mm Other specifications Mounting depth with Operating life connector 30.7 mm (operations) 500000 Mounting depth with Degree of protection plug-in socket 33.4 mm from front side IP65 Mounting hole 16.2 mm Ambient temp. operating min. -25 °C Mechanical design Ambient temp. operating Mounting see order block max. +70 °C Terminals pin connector 4-pol./ Storage temperature min. -40 °C plug-in socket Storage temperature max. +80 °C Contact system snap-action contact Resistance to constant Contact function see order block environment according to Contact arrangement 1 NO IEC 600 68-2-3 and 2-30 Contact materials Au Resistance at variable Illuminability no environment according to IEC 600 68-2-14 and 2-33 Mechanical characteristics Weight 8 g Operating force min. 0.03 Nm Rotating angle see order block Robustness max. 1.5 Nm Accessories LUMOTAST 25 selector switch Description Photo Order no. Page Plug-in socket for PCB 5.00.645.036/0000 5 - 28 Cable (flat ribbon cable 10 cm with socket connector and 5.03.771.306/0000 5 - 27 male quick connector, AMP 4-pin) Blanking cap complete with sealing disc and ring nut, 5.05.800.049/0100 5 - 33 square Label holder, flush, for square collar 5.07.620.004/0000 2 - 76 1 - 28 Stock items are marked Pushbuttons by bold printedorder numbers.

LUMOTAST 25 Accessories LUMOTAST 25 selector switch Description Photo Order no. Page Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 27 1 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Socket connector, 4-pin 5.92.025.368/0000 5 - 26 LUMOTAST 25 selector switch, "Click" quick-assembly feature LUMO 25 Panel cut-out Contact Contact function Rotating angle Form of lens Order no. complete arrangement 1 NO latching right, 1 x 90° handle 1.15.153.100/0100 Technical data see page 1 - 28 LUMOTAST 25 selector switch, ring nut fixing Panel cut-out Contact Contact function Rotating angle Form of lens Order no. complete arrangement 1 NO latching right, 1 x 90° handle 1.15.153.106/0100 Technical data see page 1 - 28 Pushbuttons Stock items are marked 1 - 29 by bold printedorder numbers.

LUMOTAST 25 LUMOTAST 25 keylock switch 1 Panel cut-out Technical data LUMO 25 General information Mechanical characteristics Colour of lens black opaque Operating force max. 1.5 Nm Form of collar square Rotating angle 90° Dimensions Electrical characteristics Length of collar 25 mm Rated voltage AC/DC max. 42 V Width of collar 25 mm Rated voltage AC/DC min. 0.02 V Overall height 32.3 mm Rated current AC/DC max. 100 mA Mounting depth with Rated current AC/DC min. 0.01 mA connector 30.7 mm Contact resistance max. 100 mΩ Mounting depth with Bouncing time max. 5 ms plug-in socket 33.4 mm Mounting hole 16.2 mm Other specifications Operating life Mechanical design (operations) 50000 Mounting ring nut Degree of protection Terminals pin connector 4-pol./ from front side IP65 plug-in socket Ambient temp. operating Contact system snap-action contact min. -25 °C Contact function latching Ambient temp. operating Contact arrangement 1 NO max. +70 °C Contact materials Au Storage temperature min. -40 °C Illuminability no Storage temperature max. +80 °C Lamp socket no Resistance to constant Lock cylinder lock environment according to Wafers 8 pins IEC 600 68-2-3 and 2-30 Lock type 5201 Resistance at variable Number of locking environment according to positions 10000 IEC 600 68-2-14 and 2-33 Main key yes Weight 20 g Symmetric key yes Key removal position see order block Accessories LUMOTAST 25 keylock switch Description Photo Order no. Page Plug-in socket for PCB 5.00.645.036/0000 5 - 28 Cable (flat ribbon cable 10 cm with socket connector and 5.03.771.306/0000 5 - 27 male quick connector, AMP 4-pin) Blanking cap complete with sealing disc and ring nut, 5.05.800.049/0100 5 - 33 square 1 - 30 Stock items are marked Pushbuttons by bold printedorder numbers.

LUMOTAST 25 Accessories LUMOTAST 25 keylock switch Description Photo Order no. Page Label holder, flush, for square collar 5.07.620.004/0000 2 - 76 1 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 27 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Spare key 5.58.015.201/0000 Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 2 - 76 Socket connector, 4-pin 5.92.025.368/0000 5 - 26 LUMO 25 LUMOTAST 25 keylock switch Panel cut-out Contact Contact function Rotating angle Key removal Colour of lens Order no. complete arrangement position 1 NO latching 90° 0 black opaque 1.15.156.001/0000 1 NO latching 90° 0 + 1 black opaque 1.15.156.011/0000 Technical data see page 1 - 30 Included: 2 keys. Pushbuttons Stock items are marked 1 - 31 by bold printedorder numbers.

LUMOTAST 25 LUMOTAST 25 emergency stop pushbutton 1 Pict.: black collar Panel cut-out Technical data LUMO 25 General information Electrical characteristics Colour of lens opaque red Rated voltage AC/DC max. 25 V Form of collar square Rated voltage AC/DC min. 0.02 V Colour of collar see order block Rated current AC/DC max. 1 A , 100 mA rated current Rated current AC/DC min. 0.01 mA Dimensions Contact resistance max. 100 mΩ Length of collar 25 mm Bouncing time max. 10 ms Width of collar 25 mm Overall height 18.5 mm Other specifications Mounting depth with Operating life 15000 connector 30.7 mm Degree of protection Mounting depth with from front side IP65 plug-in socket 33.4 mm Ambient temp. operating Mounting hole 16.2 mm min. -25 °C Ambient temp. operating Mechanical design max. +70 °C Mounting ring nut Storage temperature min. -40 °C Terminals pin connector 4-pol./ Storage temperature max. +80 °C plug-in socket Resistance to constant Contact system snap-action contact environment according to Contact function latching IEC 600 68-2-3 and 2-30 Contact arrangement 2 NC (forcibly actuated) Resistance at variable Contact materials Au environment according to Illuminability no IEC 600 68-2-14 and 2-33 Weight 9 g Mechanical characteristics Approvals TÜV/UL according to Operating force max. 10 N EN 60947-5-5 and -5-1/A2, Operating travel 2.6 mm UL 508 Switching travel 2 mm Robustness min. 100 N Accessories LUMOTAST 25 emergency stop pushbutton Description Photo Order no. Page Plug-in socket for PCB 5.00.645.036/0000 5 - 28 Cable (flat ribbon cable 10 cm with socket connector and 5.03.771.306/0000 5 - 27 male quick connector, AMP 4-pin) Blanking cap complete with sealing disc and ring nut, 5.05.800.049/0100 5 - 33 square Label holder, flush, for square collar 5.07.620.004/0000 2 - 76 1 - 32 Stock items are marked Pushbuttons by bold printedorder numbers.

LUMOTAST 25 Accessories LUMOTAST 25 emergency stop pushbutton Description Photo Order no. Page Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 27 1 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 2 - 76 Emergency stop label, yellow, adhesive, round 60 mm, 5.76.204.425/0400 without legend Emergency stop label, yellow, adhesive, round 60 mm, 5.76.204.426/0400 with legend "NOT-AUS" Emergency stop label, yellow, adhesive, round 60 mm, 5.76.204.427/0400 LUMO with legend "ARRET-D'URGENCE" 25 Emergency stop label, yellow, adhesive, round 60 mm, 5.76.204.428/0400 with legend "EMERGENCY-STOP" Emergency stop label, yellow, adhesive, round 60 mm, 5.76.204.429/0400 with legend "ARRESTO-D'EMERGENZA" Socket connector, 4-pin 5.92.025.368/0000 5 - 26 LUMOTAST 25 emergency stop pushbutton, ring nut fixing Pict.: black collar Panel cut-out Contact function Contact arrangement Colour of collar Order no. complete Order no. single parts Housing Lens latching 2 NC black 1.15.154.006/0301 (forcibly actuated) latching 2 NC yellow 1.15.154.016/0301 (forcibly actuated) Technical data see page 1 - 32 Pushbuttons Stock items are marked 1 - 33 by bold printedorder numbers.

LUMOTAST 25 LUMOTAST 25 signal lamp 1 Pict.: red Panel cut-out Technical data LUMO 25 General information Electrical characteristics Form of lens square Voltage limit max. 24 V Colour of lens see order block Power limit max. 0,7 W Dimensions Other specifications Length of collar 25 mm Degree of protection Width of collar 25 mm from front side IP65 Overall height 9.8 mm Weight 7 g Mounting depth with Ambient temp. operating connector 30.7 mm min. -25 °C Mounting depth with Ambient temp. operating plug-in socket 33.4 mm max. +70 °C Mounting hole 16.2 mm Storage temperature min. -40 °C Storage temperature max. +80 °C Mechanical design Mounting see order block Terminals pin connector 4-pol./ plug-in socket Lamp socket Bi-Pin T 1/T 11/ 4 Lamp filament lamp/LED Accessories LUMOTAST 25 signal lamp Description Photo Order no. Page Filament lamp, Bi-Pin T 11/ base, 12 V 1.90.180.474/0000 5 - 5 4 Filament lamp, Bi-Pin T 11/ base, 28 V 1.90.180.475/0000 5 - 5 4 LED Bi-Pin T 1 superbright, red, 24 V 1.90.690.351/0000 5 - 18 LED Bi-Pin T 1 superbright, green, 24 V 1.90.690.352/0000 5 - 18 LED Bi-Pin T 1 superbright, yellow, 24 V 1.90.690.353/0000 5 - 18 LED Bi-Pin T 1 superbright, blue, 24 V 1.90.690.354/0000 5 - 18 LED Bi-Pin T 1 superbright, white, 24 V 1.90.690.355/0000 5 - 18 LED Bi-Pin T 1, red, 3 V 1.90.691.026/0000 5 - 17 1 - 34 Stock items are marked Pushbuttons by bold printedorder numbers.

LUMOTAST 25 Accessories LUMOTAST 25 signal lamp Description Photo Order no. Page LED Bi-Pin T 1, green, 3 V 1.90.691.027/0000 5 - 17 1 LED Bi-Pin T 1, yellow, 3 V 1.90.691.028/0000 5 - 17 Plug-in socket for PCB 5.00.645.036/0000 5 - 28 Cable (flat ribbon cable 10 cm with socket connector and 5.03.771.306/0000 5 - 27 male quick connector, AMP 4-pin) Disassembly tool for LUMOTAST 25, RAFIX 16 5.05.800.042/0000 5 - 26 Blanking cap complete with sealing disc and ring nut, 5.05.800.049/0100 5 - 33 LUMO square 25 Label holder, flush, for square collar 5.07.620.004/0000 2 - 76 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 27 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Legend insert for illuminated versions 5.70.635.000/2000 Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 2 - 76 Socket connector, 4-pin 5.92.025.368/0000 5 - 26 Pushbuttons Stock items are marked 1 - 35 by bold printedorder numbers.

LUMOTAST 25 LUMOTAST 25 signal lamp, 24 V, „Click“ quick-assembly feature 1 Pict.: red Panel cut-out Voltage Power Lamp socket Colour of lens Order no. complete Order no. single parts limit max. limit max. Housing Lens 24 V 0.7 W Bi-Pin T 1/T 11/ transparent 1.65.122.006/1002 1.65.122.906/0000 5.49.077.014/1002 4 colourless 24 V 0.7 W Bi-Pin T 1/T 11/ transparent red 1.65.122.006/1306 1.65.122.906/0000 5.49.077.014/1306 4 LUMO 25 24 V 0.7 W Bi-Pin T 1/T 11/ transparent yellow 1.65.122.006/1403 1.65.122.906/0000 5.49.077.014/1403 4 24 V 0.7 W Bi-Pin T 1/T 11/ transparent green 1.65.122.006/1505 1.65.122.906/0000 5.49.077.014/1505 4 24 V 0.7 W Bi-Pin T 1/T 11/ transparent blue 1.65.122.006/1607 1.65.122.906/0000 5.49.077.014/1607 4 Technical data see page 1 - 34 Accessories: Legend insert for illuminated versions:5.70.635.000/2000 Do not press in lens in disassembled condition. Note when using a LED: A notch on the lamp identifies the cathode side. LUMOTAST 25 signal lamp, 24 V, ring nut fixing Pict.: blue Panel cut-out Voltage Power Lamp socket Colour of lens Order no. complete Order no. single parts limit max. limit max. Housing Lens 24 V 0.7 W Bi-Pin T 1/T 11/ transparent 1.65.122.056/1002 1.65.122.956/0000 5.49.077.014/1002 4 colourless 24 V 0.7 W Bi-Pin T 1/T 11/ transparent red 1.65.122.056/1306 1.65.122.956/0000 5.49.077.014/1306 4 24 V 0.7 W Bi-Pin T 1/T 11/ transparent yellow 1.65.122.056/1403 1.65.122.956/0000 5.49.077.014/1403 4 24 V 0.7 W Bi-Pin T 1/T 11/ transparent green 1.65.122.056/1505 1.65.122.956/0000 5.49.077.014/1505 4 24 V 0.7 W Bi-Pin T 1/T 11/ transparent blue 1.65.122.056/1607 1.65.122.956/0000 5.49.077.014/1607 4 Technical data see page 1 - 34 Accessories: Legend insert for illuminated versions:5.70.635.000/2000 Do not press in lens in disassembled condition. Note when using LED: A notch on the lamp socket identifies the cathode side. 1 - 36 Stock items are marked Pushbuttons by bold printedorder numbers.