Features n RoHS compliant* and halogen free** n Surface mount SMC package n Standoff voltage: 5 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: DVBR = 0.1 % x VBR @ 25 °C x DT 5.0SMDJ Transient Voltage Suppressor Diode Series General Information Agency Recognition Portable communications, computing and video equipment manufacturers are challenging Description the semiconductor industry to develop increasingly higher power density circuit protection components. UL File Number: E153537 Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 209 V. Typical fast response times are less than 1.0 ps from 0 V to Breakdown Voltage. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (Tp = 1 ms) (Note 1,2) PPK 5000 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load IFSM 300 Amps (JEDEC Method) (Note 3,4) Steady State Power Dissipation @ TL = 50 °C PM(AV) 6.5 Watts (MFaoxr iUmnuimdi rIencsttiaonntaal nUenoiutss OFnolryw)ard Voltage @ IPP = 100 A VF 5 Volts Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range TSTG -55 to +150 °C 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal. How to Order 5.0SMDJ 12 CA - H Package 5.0SMDJ = SMC/DO-214AB Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com Working Peak Reverse Voltage 12 = 12 VRWM (Volts) Europe: Suffix Tel: +36 88 885 877 • Email: eurocus@bourns.com A = 5 % Tolerance Unidirectional Device The Americas: CA = 5 % Tolerance Bidirectional Device Tel: +1-951 781-5500 • Email: americus@bourns.com Reel (Blank) = 13-inch Reel www.bourns.com -H = 7-inch Reel WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

5.0SMDJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Maximum Maximum Maximum Maximum Maximum Reverse Clamping Peak Clamping Peak Breakdown Voltage Reverse Unidirectional Device Bidirectional Device Standoff Voltage Pulse Voltage Pulse VBR (Volts) Voltage Leakage @ Ipp Current @ Ipp Current @ VRWM (10/1000 µs) (10/1000 µs) (8/20 µs) (8/20 µs) Part Part Part Part Min. Max. @ IT VRWM IR Vc Ipp Vc Ipp Number Marking Number Marking (mA) (V) (μA) (V) (A) (V) (A) 5.0SMDJ5.0A 5RDE 5.0SMDJ5.0CA 5DDE 6.40 7.00 10 5.0 1050 9.2 543.6 12.0 4077.0 5.0SMDJ6.0A 5RDG 5.0SMDJ6.0CA 5DDG 6.67 7.37 10 6.0 1050 10.3 485.5 13.4 3641.3 5.0SMDJ6.5A 5RDK 5.0SMDJ6.5CA 5DDK 7.22 7.98 10 6.5 750 11.2 446.5 14.6 3348.8 5.0SMDJ7.0A 5PDM 5.0SMDJ7.0CA 5DDM 7.78 8.60 10 7.0 300 12.0 416.8 15.6 3126.0 5.0SMDJ7.5A 5PDP 5.0SMDJ7.5CA 5DDP 8.33 9.21 1 7.5 150 12.9 387.7 16.8 2907.8 5.0SMDJ8.0A 5PDR 5.0SMDJ8.0CA 5DDR 8.89 9.83 1 8.0 70 13.6 367.7 17.7 2757.8 5.0SMDJ8.5A 5PDT 5.0SMDJ8.5CA 5DDT 9.44 10.40 1 8.5 30 14.4 347.3 18.7 2604.8 5.0SMDJ9.0A 5PDV 5.0SMDJ9.0CA 5DDV 10.00 11.10 1 9.0 12 15.4 324.8 20.0 2436.0 5.0SMDJ10A 5PDX 5.0SMDJ10CA 5DDX 11.10 12.30 1 10.0 6 17.0 294.2 22.1 2206.5 5.0SMDJ11A 5PDZ 5.0SMDJ11CA 5DDZ 12.20 13.50 1 11.0 2 18.2 274.8 23.7 2061.0 5.0SMDJ12A 5PEP 5.0SMDJ12CA 5BEP 13.30 14.70 1 12.0 2 19.9 252.0 25.9 1890.0 5.0SMDJ13A 5PEQ 5.0SMDJ13CA 5BEQ 14.40 15.90 1 13.0 2 21.5 233.0 28.0 1747.5 5.0SMDJ14A 5PER 5.0SMDJ14CA 5BER 15.60 17.20 1 14.0 2 23.2 216.0 30.2 1620.0 5.0SMDJ15A 5PES 5.0SMDJ15CA 5BES 16.70 18.50 1 15.0 2 24.4 205.0 31.7 1537.5 5.0SMDJ16A 5PET 5.0SMDJ16CA 5BET 17.80 19.70 1 16.0 2 26.0 193.0 33.8 1447.5 5.0SMDJ17A 5PEU 5.0SMDJ17CA 5BEU 18.90 20.90 1 17.0 2 27.6 181.0 35.9 1357.5 5.0SMDJ18A 5PEV 5.0SMDJ18CA 5BEV 20.00 22.10 1 18.0 2 29.2 172.0 38.0 1290.0 5.0SMDJ20A 5PEW 5.0SMDJ20CA 5BEW 22.20 24.50 1 20.0 2 32.4 155.0 42.1 1162.5 5.0SMDJ22A 5PEX 5.0SMDJ22CA 5BEX 24.40 26.90 1 22.0 2 35.5 141.0 46.2 1057.5 5.0SMDJ24A 5PEZ 5.0SMDJ24CA 5BEZ 26.70 29.50 1 24.0 2 38.9 129.0 50.6 967.5 5.0SMDJ26A 5PFE 5.0SMDJ26CA 5BFE 28.90 31.90 1 26.0 2 42.1 119.0 54.7 892.5 5.0SMDJ28A 5PFG 5.0SMDJ28CA 5BFG 31.10 34.40 1 28.0 2 45.4 110.0 59.0 825.0 5.0SMDJ30A 5PFK 5.0SMDJ30CA 5BFK 33.30 36.80 1 30.0 2 48.4 103.0 62.9 772.5 5.0SMDJ33A 5PFM 5.0SMDJ33CA 5BFM 36.70 40.60 1 33.0 2 53.3 93.9 69.3 704.3 5.0SMDJ36A 5PFP 5.0SMDJ36CA 5BFP 40.00 44.20 1 36.0 2 58.1 86.1 75.5 645.8 5.0SMDJ40A 5PFR 5.0SMDJ40CA 5BFR 44.40 49.10 1 40.0 2 64.5 77.6 83.9 582.0 5.0SMDJ43A 5PFT 5.0SMDJ43CA 5BFT 47.80 52.80 1 43.0 2 69.4 72.1 90.2 540.8 5.0SMDJ45A 5PFV 5.0SMDJ45CA 5BFV 50.00 55.30 1 45.0 2 72.7 68.8 94.5 516.0 5.0SMDJ48A 5PFX 5.0SMDJ48CA 5BFX 53.30 58.90 1 48.0 2 77.4 64.7 100.6 485.3 5.0SMDJ51A 5PFZ 5.0SMDJ51CA 5BFZ 56.70 62.70 1 51.0 2 82.4 60.7 107.1 455.3 5.0SMDJ54A 5RGE 5.0SMDJ54CA 5BGE 60.00 66.30 1 54.0 2 87.1 57.5 113.2 431.3 5.0SMDJ58A 5PGG 5.0SMDJ58CA 5BGG 64.40 71.20 1 58.0 2 93.6 53.5 121.7 401.3 5.0SMDJ60A 5PGK 5.0SMDJ60CA 5BGK 66.70 73.70 1 60.0 2 96.8 51.7 125.8 387.8 5.0SMDJ64A 5PGM 5.0SMDJ64CA 5BGM 71.10 78.60 1 64.0 2 103.0 48.6 133.9 364.5 5.0SMDJ70A 5PGP 5.0SMDJ70CA 5BGP 77.80 86.00 1 70.0 2 113.0 44.3 146.9 332.3 5.0SMDJ75A 5PGR 5.0SMDJ75CA 5BGR 83.30 92.10 1 75.0 2 121.0 41.4 157.3 310.5 5.0SMDJ78A 5PGT 5.0SMDJ78CA 5BGT 86.70 95.80 1 78.0 2 126.0 39.7 163.8 297.8 5.0SMDJ85A 5PGV 5.0SMDJ85CA 5BGV 94.40 104.00 1 85.0 2 137.0 36.5 178.1 273.8 5.0SMDJ90A 5PGX 100.00 111.00 1 90.0 2 146.0 34.3 189.8 257.3 5.0SMDJ100A 5PGZ 111.00 123.00 1 100.0 2 162.0 30.9 210.6 231.8 5.0SMDJ110A 5PHE 122.00 135.00 1 110.0 2 177.0 28.3 230.1 212.3 5.0SMDJ120A 5PHG 133.00 147.00 1 120.0 2 193.0 26.0 250.9 195.0 5.0SMDJ130A 5PHK 144.00 159.00 1 130.0 2 209.0 24.0 271.7 180.0 5.0SMDJ150A 5PHM 167.00 185.00 1 150.0 2 243.0 20.6 315.9 154.5 5.0SMDJ160A 5PHP 178.00 197.00 1 160.0 2 259.0 19.3 336.7 144.8 5.0SMDJ170A 5PHR 189.00 209.00 1 170.0 2 275.0 18.2 357.5 136.5 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

5.0SMDJ Transient Voltage Suppressor Diode Series A Product Dimensions Recommended Footprint A A B C A B B C B C CATHODE BAND (UNIDIRECTIONAL DEVICES ONLY) Dimension SMC (DO-214AB) G C 4.69 A (Max.) CATHODE BAND (0.185) (UNIDIRECTIONAL DEVICES ONLY) 3.07 G B (Min.) (0.121) 1.53 H F D C (Min.) (0.060) E MM H F D D IMENSIONS: (INCHES) E MM DIMENSIONS: (INCHES) Physical Specifications Dimension SMMCM (DO-214AB) DIMENSIONS: (INC6HE.S6)0 - 7.11 Encapsulation .............................Molded plastic per UL Class 94V-0 A Polarity.......................Cathode band indicates unidirectional device (0.260 - 0.280) No cathode band indicates bidirectional device 5.59 - 6.22 B (0.220 - 0.245) 2.90 - 3.20 C Environmental Specifications (0.114 - 0.126) 0.15 - 0.31 Moisture Sensitivity Level ................................................................1 D (0.006 - 0.012) ESD Classification (HBM).............................................................3B 7.75 - 8.13 E (0.305 - 0.320) 0.05 - 0.20 F (0.002 - 0.008) 2.01 - 2.62 G (0.080 - 0.103) 0.76 - 1.52 H (0.030 - 0.060) MM DIMENSIONS: (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

5.0SMDJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 100 300 s) Peak Pulse Derating in Percent ofPeak Power or Current 752505 10 x 1000 Wbya vRe.fEo.rAm. as Defined Peak Forward Surge Current (Amp22115050500000 310000 AA aatt 18 0c yccylceles 0 0 0 25 50 75 100 125 150 175 200 1 2 5 10 20 50 100 Junction Temperature (°C) Number of Cycles at 60 Hz Pulse Waveform Typical Junction Capacitance 100000 TR=10 µs Peak value (IRSM) 100 Bidirectional v=0v I, Peak Pulse Current (%)P 50 TA=T2P5 °C Half value=IR2SMdiwes1ca hd0asPeey rudxfsei len s 1ttfeeo0hind 0ew5e 0adp0ids e wb %tathayhk v a( oRceTtf u.f PpEoIrP)o.rrA meSin.nMtt . C - Junction Capacitance (pF)J11010001000000 TJ = 25 °C Unid@ire VctRional Bidi@re cVtiRonal Unidirectional v=0v f = 1.0 MHz Vsig = 50 mVp-p 0 1 0 1.0 2.0 3.0 4.0 1 10 100 1000 T, Time (ms) VBR - Reverse Breakdown Voltage (V) Pulse Rating Curve Steady State Power Derating Curve 1000 6.5 W) TA = 25 °C W) 6.0 er (k 100 ation ( 55..05 w p Pulse Po 10 Power Dissi 443...055 eak State 32..05 - P ady 2.0 PPPM 1 8.0 x 8.0 mm SteM(AV) 11..05 60 Hz Resistive or (0.31 x 0.31 in.) P 0.5 Inductive Load Copper Pad Areas 0.1 0.0 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) td - Pulse Width (sec.) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

C5.D0DSMFND5J- T0r5a0n4sNie n-t T VVoSlt/aSgtee eSruinppgr Desiosodre DAirordaey Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P1 E T d Index Hole 120 ° F D2 W B D1 D P A C Unidirectional Trailer Product Device Leader Orientation ....... ....... ....... ....... W1 End ....... ....... ....... ....... Start MM DIMENSIONS: (INCHES) 10 pitches (min.) 10 pitches (min.) Devices are packed in accordance with EIA standard Direction of Feed EIA-481-D and specifications shown here. Item Symbol SMC (DO-214AB) 7-Inch Reel 13-Inch Reel 6.0 ± 0.20 Carrier Width A (0.236 ± 0.079) 8.3 ± 0.20 Carrier Length B (0.327 ± 0.008) 2.5 ± 0.20 Carrier Depth C (0.098 ± 0.008) 1.50 ± 0.10 Sprocket Hole d (0.059 ± 0.004) 178 330 Reel Outside Diameter D (7.008) (12.992) 50.0 Reel Inner Diameter D1 (1.969) MIN. 13.0 +0.50/-0.20 Feed Hole Diameter D2 (0.512 +0.020/-0.008) 1.75 ± 0.10 Sprocket Hole Position E (0.069 ± 0.004) 7.50 ± 0.10 Punch Hole Position F (0.295 ± 0.004) 8.00 ± 0.10 Punch Hole Pitch P (0.315 ± 0.004) 4.00 ± 0.10 Sprocket Hole Pitch P0 (0.157 ± 0.004) 2.00 ± 0.10 Embossment Center P1 (0.079 ± 0.004) 0.30± 0.10 Overall Tape Thickness T (0.012 ± 0.004) 16.00 ± 0.30 Tape Width W (0.630 ± 0.012) 22.4 Reel Width W1 (0.882) MAX. Quantity per Reel -- 500 3,000 REV. 03/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap- plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R