NT *RoHS VCEOARVMSIAPILOLINAASB LE Features NT MPLIA n RoHS compliant* and halogen free** O HS C n Surface mount SMC package Ro * n Standoff voltage: 5 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: DVBR = 0.1 % x VBR @ 25 °C xD T REE D F LEA 5.0SMDJ Transient Voltage Suppressor Diode Series General Information PhBioogruhtraenbrs lpe oo cfwfoeemrsr m dTeurannnsicsitaiyet incoitnr cVsuo, ilctt aopgmroept eSuctuitnpiogpn ra ecnsodsm ovLprViER dEoADoReDHn SIiSFo oeORC NEdnOeSE eMtqAsPsRLu.IE AifpNoTmr* seunrtg me aannudf aEcStuDr eprrso atercet icohna allepnpglicinagti othnes ,s ienm ciocmonpdaucct tcohr ipin dpuasctkrayg teo DdeOv-e2l1o4pA inBc r(eSaMsCin)g ly size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 209 V. Typical fast response times are less than 1.0 ps from 0 V to Breakdown Voltage. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (Tp = 1 ms) (Note 1,2) PPK 5000 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load IFSM 300 Amps (JEDEC Method) (Note 3,4) Steady State Power Dissipation @ TL = 50 °C PM(AV) 6.5 Watts M(Faoxr imUnuimdi rIencsttiaonntaal nUenoiutss OFnolryw)ard Voltage @ IPP = 100 A VF 5 Volts Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range TSTG -55 to +150 °C 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal. How to Order 5.0SMDJ 12 CA - H Package Asia-Pacific: 5.0SMDJ = SMC/DO-214AB Tel: +886-2 2562-4117 Working Peak Reverse Voltage Email: asiacus@bourns.com 12 = 12 VRWM (Volts) Europe: Suffix A = 5 % Tolerance Unidirectional Device Tel: +36 88 520 390 CA = 5 % Tolerance Bidirectional Device Email: eurocus@bourns.com Reel The Americas: (Blank) = 13-inch Reel Tel: +1-951 781-5500 -H = 7-inch Reel Email: americus@bourns.com www.bourns.com * RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

5.0SMDJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Maximum Maximum Reverse Peak Breakdown Voltage Reverse Clamping Unidirectional Device Bidirectional Device Standoff Pulse VBR (Volts) Voltage Leakage Voltage Current @ VRWM @ IPP Part Part Part Part Number Marking Number Marking Min. Max. @ IT (mA) VRWM (V) IR (μA) VC (V) IPP (A) 5.0SMDJ5.0A 5RDE 5.0SMDJ5.0CA 5DDE 6.40 7.00 10 5.0 1050 9.2 543.6 5.0SMDJ6.0A 5RDG 5.0SMDJ6.0CA 5DDG 6.67 7.37 10 6.0 1050 10.3 485.5 5.0SMDJ6.5A 5RDK 5.0SMDJ6.5CA 5DDK 7.22 7.98 10 6.5 750 11.2 446.5 5.0SMDJ7.0A 5PDM 5.0SMDJ7.0CA 5DDM 7.78 8.60 10 7.0 300 12.0 416.8 5.0SMDJ7.5A 5PDP 5.0SMDJ7.5CA 5DDP 8.33 9.21 1 7.5 150 12.9 387.7 5.0SMDJ8.0A 5PDR 5.0SMDJ8.0CA 5DDR 8.89 9.83 1 8.0 70 13.6 367.7 5.0SMDJ8.5A 5PDT 5.0SMDJ8.5CA 5DDT 9.44 10.40 1 8.5 30 14.4 347.3 5.0SMDJ9.0A 5PDV 5.0SMDJ9.0CA 5DDV 10.00 11.10 1 9.0 12 15.4 324.8 5.0SMDJ10A 5PDX 5.0SMDJ10CA 5DDX 11.10 12.30 1 10.0 6 17.0 294.2 5.0SMDJ11A 5PDZ 5.0SMDJ11CA 5DDZ 12.20 13.50 1 11.0 2 18.2 274.8 5.0SMDJ12A 5PEP 5.0SMDJ12CA 5BEP 13.30 14.70 1 12.0 2 19.9 252.0 5.0SMDJ13A 5PEQ 5.0SMDJ13CA 5BEQ 14.40 15.90 1 13.0 2 21.5 233.0 5.0SMDJ14A 5PER 5.0SMDJ14CA 5BER 15.60 17.20 1 14.0 2 23.2 216.0 5.0SMDJ15A 5PES 5.0SMDJ15CA 5BES 16.70 18.50 1 15.0 2 24.4 205.0 5.0SMDJ16A 5PET 5.0SMDJ16CA 5BET 17.80 19.70 1 16.0 2 26.0 193.0 5.0SMDJ17A 5PEU 5.0SMDJ17CA 5BEU 18.90 20.90 1 17.0 2 27.6 181.0 5.0SMDJ18A 5PEV 5.0SMDJ18CA 5BEV 20.00 22.10 1 18.0 2 29.2 172.0 5.0SMDJ20A 5PEW 5.0SMDJ20CA 5BEW 22.20 24.50 1 20.0 2 32.4 155.0 5.0SMDJ22A 5PEX 5.0SMDJ22CA 5BEX 24.40 26.90 1 22.0 2 35.5 141.0 5.0SMDJ24A 5PEZ 5.0SMDJ24CA 5BEZ 26.70 29.50 1 24.0 2 38.9 129.0 5.0SMDJ26A 5PFE 5.0SMDJ26CA 5BFE 28.90 31.90 1 26.0 2 42.1 119.0 5.0SMDJ28A 5PFG 5.0SMDJ28CA 5BFG 31.10 34.40 1 28.0 2 45.4 110.0 5.0SMDJ30A 5PFK 5.0SMDJ30CA 5BFK 33.30 36.80 1 30.0 2 48.4 103.0 5.0SMDJ33A 5PFM 5.0SMDJ33CA 5BFM 36.70 40.60 1 33.0 2 53.3 93.9 5.0SMDJ36A 5PFP 5.0SMDJ36CA 5BFP 40.00 44.20 1 36.0 2 58.1 86.1 5.0SMDJ40A 5PFR 5.0SMDJ40CA 5BFR 44.40 49.10 1 40.0 2 64.5 77.6 5.0SMDJ43A 5PFT 5.0SMDJ43CA 5BFT 47.80 52.80 1 43.0 2 69.4 72.1 5.0SMDJ45A 5PFV 5.0SMDJ45CA 5BFV 50.00 55.30 1 45.0 2 72.7 68.8 5.0SMDJ48A 5PFX 5.0SMDJ48CA 5BFX 53.30 58.90 1 48.0 2 77.4 64.7 5.0SMDJ51A 5PFZ 5.0SMDJ51CA 5BFZ 56.70 62.70 1 51.0 2 82.4 60.7 5.0SMDJ54A 5RGE 5.0SMDJ54CA 5BGE 60.00 66.30 1 54.0 2 87.1 57.5 5.0SMDJ58A 5PGG 5.0SMDJ58CA 5BGG 64.40 71.20 1 58.0 2 93.6 53.5 5.0SMDJ60A 5PGK 5.0SMDJ60CA 5BGK 66.70 73.70 1 60.0 2 96.8 51.7 5.0SMDJ64A 5PGM 5.0SMDJ64CA 5BGM 71.10 78.60 1 64.0 2 103.0 48.6 5.0SMDJ70A 5PGP 5.0SMDJ70CA 5BGP 77.80 86.00 1 70.0 2 113.0 44.3 5.0SMDJ75A 5PGR 5.0SMDJ75CA 5BGR 83.30 92.10 1 75.0 2 121.0 41.4 5.0SMDJ78A 5PGT 5.0SMDJ78CA 5BGT 86.70 95.80 1 78.0 2 126.0 39.7 5.0SMDJ85A 5PGV 5.0SMDJ85CA 5BGV 94.40 104.00 1 85.0 2 137.0 36.5 5.0SMDJ90A 5PGX 100.00 111.00 1 90.0 2 146.0 34.3 5.0SMDJ100A 5PGZ 111.00 123.00 1 100.0 2 162.0 30.9 5.0SMDJ110A 5PHE 122.00 135.00 1 110.0 2 177.0 28.3 5.0SMDJ120A 5PHG 133.00 147.00 1 120.0 2 193.0 26.0 5.0SMDJ130A 5PHK 144.00 159.00 1 130.0 2 209.0 24.0 5.0SMDJ150A 5PHM 167.00 185.00 1 150.0 2 243.0 20.6 5.0SMDJ160A 5PHP 178.00 197.00 1 160.0 2 259.0 19.3 5.0SMDJ170A 5PHR 189.00 209.00 1 170.0 2 275.0 18.2 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

5.0SMDJ Transient Voltage Suppressor Diode Series A Product Dimensions Recommended Footprint A A B C A B B C B C CATHODE BAND (UNIDIRECTIONAL DEVICES ONLY) Dimension SMC (DO-214AB) G C 4.69 A (Max.) CATHODE BAND (0.185) (UNIDIRECTIONAL DEVICES ONLY) 3.07 G B (Min.) (0.121) 1.53 H F D C (Min.) (0.060) E MM H F D D IMENSIONS: (INCHES) E MM DIMENSIONS: (INCHES) Physical Specifications Dimension SMMCM (DO-214AB) DIMENSIONS: (INC6HE.S6)0 - 7.11 Encapsulation .............................Molded plastic per UL Class 94V-0 A Polarity.......................Cathode band indicates unidirectional device (0.260 - 0.280) No cathode band indicates bidirectional device 5.59 - 6.22 B (0.220 - 0.245) 2.90 - 3.20 C Environmental Specifications (0.114 - 0.126) 0.15 - 0.31 Moisture Sensitivity Level ................................................................1 D (0.006 - 0.112) ESD Classification (HBM).............................................................3B 7.75 - 8.13 E (0.305 - 0.320) 0.05 - 0.20 F (0.002 - 0.008) 2.01 - 2.62 G (0.080 - 0.103) 0.76 - 1.52 H (0.030 - 0.060) MM DIMENSIONS: (INCHES) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

5.0SMDJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 100 300 s) Peak Pulse Derating in Percent ofPeak Power or Current 752505 10 x 1000 Wbya vRe.fEo.rAm. as Defined Peak Forward Surge Current (Amp22115050500000 310000 AA aatt 18 0c yccylceles 0 0 0 25 50 75 100 125 150 175 200 1 2 5 10 20 50 100 Junction Temperature (°C) Number of Cycles at 60 Hz Pulse Waveform Typical Junction Capacitance 100000 TR=10 µs Peak value (IRSM) 100 Bidirectional v=0v I, Peak Pulse Current (%)P 50 TA=T2P5 °C Half value=IR2SMdiwes1ca hd0asPeey rudxfsei len s 1ttfeeo0hind 0ew5e 0adp0ids e wb %tathayhk v a( oRceTtf u.f PpEoIrP)o.rrA meSin.nMtt . C - Junction Capacitance (pF)J11010001000000 TJ = 25 °C Unid@ire VctRional Bidi@re cVtiRonal Unidirectional v=0v f = 1.0 MHz Vsig = 50 mVp-p 0 1 0 1.0 2.0 3.0 4.0 1 10 100 1000 T, Time (ms) VBR - Reverse Breakdown Voltage (V) Pulse Rating Curve Steady State Power Derating Curve 1000 6.5 W) TA = 25 °C W) 6.0 er (k 100 ation ( 55..05 w p Pulse Po 10 Power Dissi 443...055 eak State 32..05 - P ady 2.0 PPPM 1 8.0 x 8.0 mm SteM(AV) 11..05 60 Hz Resistive or (0.31 x 0.31 in.) P 0.5 Inductive Load Copper Pad Areas 0.1 0.0 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) td - Pulse Width (sec.) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

C5.D0DSFMND5J- 0T5ra0n4sNie -n tT VVoSl/tSagteee Sriunpgp rDeisosdoer DAirordaey Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P1 E T d Index Hole 120 ° F D2 W B D1 D P A C Trailer Device Leader ....... ....... ....... ....... W1 End ....... ....... ....... ....... Start MM DIMENSIONS: (INCHES) 10 pitches (min.) 10 pitches (min.) Devices are packed in accordance with EIA standard Direction of Feed EIA-481-D and specifications shown here. Item Symbol SMC (DO-214AB) 7-Inch Reel 13-Inch Reel 6.0 ± 0.20 Carrier Width A (0.236 ± 0.079) 8.3 ± 0.20 Carrier Length B (0.327 ± 0.008) 2.5 ± 0.20 Carrier Depth C (0.098 ± 0.008) 1.50 ± 0.10 Sprocket Hole d (0.059 ± 0.004) 178 330 Reel Outside Diameter D (7.008) (12.992) 50.0 Reel Inner Diameter D1 (1.969) MIN. 13.0 +0.50/-0.20 Feed Hole Diameter D2 (0.512 +0.020/-0.008) 1.75 ± 0.10 Sprocket Hole Position E (0.069 ± 0.004) 7.50 ± 0.10 Punch Hole Position F (0.295 ± 0.004) 8.00 ± 0.10 Punch Hole Pitch P (0.315 ± 0.004) 4.00 ± 0.10 Sprocket Hole Pitch P0 (0.157 ± 0.004) 2.00 ± 0.10 Embossment Center P1 (0.079 ± 0.004) 0.30± 0.10 Overall Tape Thickness T (0.012 ± 0.004) 16.00 ± 0.30 Tape Width W (0.630 ± 0.012) 22.4 Reel Width W1 (0.882) MAX. Quantity per Reel -- 500 3,000 05/18 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.