Transient Voltage Suppression (TVS) Diodes Surface Mount – 5000W > 5.0SMDJ series 5.0SMDJ Series RoHS Pb e3 Description The 5.0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients Uni-directional induced by lightning and other transient voltage events. Features Bi-directional • 5000W peak pulse power capability capability at 10/1000μs • Low incremental surge waveform, repetition rate resistance (duty cycles):0.01% • Typical I less than 5μA R • SMD low profile when V min>22V BR surface mount package • High temperature Agency Approvals minimizing PCB footprint to reflow soldering • Typical failure mode is guaranteed: 260°C/40sec AGENCY AGENCY FILE NUMBER short from over-specified • V @ T= V @25°C voltage or current BR J BR E230531 x (1+αT x (T - 25)) J • Whisker test is conducted (αT:Temperature based on JEDEC Coefficient, typical value Maximum Ratings and Thermal Characteristics JESD201A per its table 4a is 0.1%) (T =25OC unless otherwise noted) A and 4c • UL Recognized compound Parameter Symbol Value Unit • IEC-61000-4-2 ESD meeting flammability Peak Pulse Power Dissipation at 30kV(Air), 30kV (Contact) rating V-0 T=25OC by 10/1000µs Waveform P 5000 W • ESD protection of data • Meet MSL level1, per L PPM (Fig.2)(Note 1), (Note 2) lines in accordance with J-STD-020, LF maximun Power Dissipation on Infinite Heat IEC 61000-4-2 peak of 260°C P 6.5 W Sink at TL=50OC D • EFT protection of data • Matte tin lead–free plated Peak Forward Surge Current, 8.3ms I 300 A lines in accordance with • Halogen free and RoHS Single Half Sine Wave (Note 3) FSM IEC 61000-4-4 compliant Maximum Instantaneous Forward • Built-in strain relief • Pb-free E3 means 2nd Voltage at 100A for Unidirectional V 5.0 V Only F • Glass passivated chip level interconnect is Operating Temperature Range T -65 to 150 °C junction Pb-free and the terminal J • Fast response time: finish material is tin(Sn) Storage Temperature Range T -65 to 175 °C STG typically less than 1.0ps (IPC/JEDEC J-STD- Typical Thermal Resistance Junction from 0V to BV min 609A.01) R 15 °C/W to Lead θJL • Excellent clamping Typical Thermal Resistance Junction R 75 °C/W to Ambient θJA Applications Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above T (initial) =25OC per Fig. 3. TVS devices are ideal for the protection of I/O Interfaces, J 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. V bus and other vulnerable circuits used in Telecom, CC 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional Computer, Industrial and Consumer electronic component only, duty cycle = 4 per minute maximum. applications. Functional Diagram Additional Infomarion Bi-directional Datasheet Resources Samples Cathode Anode Uni-directional © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/05/18

Transient Voltage Suppression Diodes Surface Mount – 5000W > 5.0SMDJ series Electrical Characteristics (T=25°C unless otherwise noted) A Breakdown Maximun Maximum Maximum Maximum Marking Reverse Voltage V Test Clamping Peak Clamping Peak Maximum Maximum Agency Nu(PUmanrbti) e r NuP(mBarib)t e r VSo(tVlatonagldte so )VffR (Volts) @ BIRT CurIrTe nt(10VV/o1Cl@0ta0Ig0PPeμ s) (1C0uP/ru1re0lan0s0te μI PsP) (V8Vo/C2l@t0aµIgPsPe ) ICP(8uu/rlr2ae0snμet s ) LReIeRa@vkeaVrgsRee ToCefmo Vepfefi (rc%aiet/unCrte) Approval (mA) PP (µA) BR UNI BI MIN MAX (V) (A) (V) (A) 5.0SMDJ12A 5.0SMDJ12CA 5PEP 5BEP 12.0 13.30 14.70 10 19.9 252.00 1890.0 25.7 800 0.075 X 5.0SMDJ13A 5.0SMDJ13CA 5PEQ 5BEQ 13.0 14.40 15.90 10 21.5 233.00 1747.5 27.8 500 0.076 X 5.0SMDJ14A 5.0SMDJ14CA 5PER 5BER 14.0 15.60 17.20 10 23.2 216.00 1620.0 30.0 200 0.08 X 5.0SMDJ15A 5.0SMDJ15CA 5PES 5BES 15.0 16.70 18.50 1 24.4 205.00 1537.5 31.5 100 0.083 X 5.0SMDJ16A 5.0SMDJ16CA 5PET 5BET 16.0 17.80 19.70 1 26.0 193.00 1447.5 33.6 50 0.084 X 5.0SMDJ17A 5.0SMDJ17CA 5PEU 5BEU 17.0 18.90 20.90 1 27.6 181.00 1357.5 35.7 20 0.085 X 5.0SMDJ18A 5.0SMDJ18CA 5PEV 5BEV 18.0 20.00 22.10 1 29.2 172.00 1290.0 37.7 10 0.088 X 5.0SMDJ20A 5.0SMDJ20CA 5PEW 5BEW 20.0 22.20 24.50 1 32.4 155.00 1162.5 41.9 5 0.091 X 5.0SMDJ22A 5.0SMDJ22CA 5PEX 5BEX 22.0 24.40 26.90 1 35.5 141.00 1057.5 45.9 5 0.092 X 5.0SMDJ24A 5.0SMDJ24CA 5PEZ 5BEZ 24.0 26.70 29.50 1 38.9 129.00 967.5 50.3 5 0.092 X 5.0SMDJ26A 5.0SMDJ26CA 5PFE 5BFE 26.0 28.90 31.90 1 42.1 119.00 892.5 54.4 5 0.093 X 5.0SMDJ28A 5.0SMDJ28CA 5PFG 5BFG 28.0 31.10 34.40 1 45.4 110.00 825.0 58.7 5 0.094 X 5.0SMDJ30A 5.0SMDJ30CA 5PFK 5BFK 30.0 33.30 36.80 1 48.4 103.00 772.5 62.5 5 0.096 X 5.0SMDJ33A 5.0SMDJ33CA 5PFM 5BFM 33.0 36.70 40.60 1 53.3 93.90 704.3 68.9 5 0.097 X 5.0SMDJ36A 5.0SMDJ36CA 5PFP 5BFP 36.0 40.00 44.20 1 58.1 86.10 645.8 75.1 5 0.098 X 5.0SMDJ40A 5.0SMDJ40CA 5PFR 5BFR 40.0 44.40 49.10 1 64.5 77.60 582.0 83.3 5 0.099 X 5.0SMDJ43A 5.0SMDJ43CA 5PFT 5BFT 43.0 47.80 52.80 1 69.4 72.10 540.8 89.7 5 0.1 X 5.0SMDJ45A 5.0SMDJ45CA 5PFV 5BFV 45.0 50.00 55.30 1 72.7 68.80 516.0 93.9 5 0.101 X 5.0SMDJ48A 5.0SMDJ48CA 5PFX 5BFX 48.0 53.30 58.90 1 77.4 64.70 485.3 100.0 5 0.101 X 5.0SMDJ51A 5.0SMDJ51CA 5PFZ 5BFZ 51.0 56.70 62.70 1 82.4 60.70 455.3 106.5 5 0.101 X 5.0SMDJ54A 5.0SMDJ54CA 5PGE 5BGE 54.0 60.00 66.30 1 87.1 57.50 431.3 112.5 5 0.102 X 5.0SMDJ58A 5.0SMDJ58CA 5PGG 5BGG 58.0 64.40 71.20 1 93.6 53.50 401.3 120.9 5 0.103 X 5.0SMDJ60A 5.0SMDJ60CA 5PGK 5BGK 60.0 66.70 73.70 1 96.8 51.70 387.8 125.1 5 0.103 X 5.0SMDJ64A 5.0SMDJ64CA 5PGM 5BGM 64.0 71.10 78.60 1 103.0 48.60 364.5 133.1 5 0.104 X 5.0SMDJ70A 5.0SMDJ70CA 5PGP 5BGB 70.0 77.80 86.00 1 113.0 44.30 332.3 146.0 5 0.105 X 5.0SMDJ75A 5.0SMDJ75CA 5PGR 5BGR 75.0 83.30 92.10 1 121.0 41.40 310.5 156.3 5 0.106 X 5.0SMDJ78A 5.0SMDJ78CA 5PGT 5BGT 78.0 86.70 95.80 1 126.0 39.70 297.8 162.8 5 0.106 X 5.0SMDJ85A 5.0SMDJ85CA 5PGV 5BGV 85.0 94.40 104.00 1 137.0 36.50 273.8 177.0 5 0.106 X 5.0SMDJ90A 5.0SMDJ90CA 5PGX 5BGX 90.0 100.00 111.00 1 146.0 34.30 257.3 188.6 5 0.107 X 5.0SMDJ100A 5.0SMDJ100CA 5PGZ 5BGZ 100.0 111.00 123.00 1 162.0 30.90 231.8 209.3 5 0.107 X 5.0SMDJ110A 5.0SMDJ110CA 5PHE 5BHE 110.0 122.00 135.00 1 177.0 28.30 212.3 228.7 5 0.107 X 5.0SMDJ120A 5.0SMDJ120CA 5PHG 5BHG 120.0 133.00 147.00 1 193.0 26.00 195.0 249.4 5 0.108 X 5.0SMDJ130A 5.0SMDJ130CA 5PHK 5BHK 130.0 144.00 159.00 1 209.0 24.00 180.0 270.0 5 0.108 X 5.0SMDJ140A 5.0SMDJ140CA 5PHL 5BHL 140.0 156.00 172.00 1 226.1 22.2 166.5 292.1 5 0.108 - 5.0SMDJ150A 5.0SMDJ150CA 5PHM 5BHM 150.0 167.00 185.00 1 243.0 20.60 154.5 314.0 5 0.108 X 5.0SMDJ160A 5.0SMDJ160CA 5PHP 5BHB 160.0 178.00 197.00 1 259.0 19.30 144.8 334.6 5 0.108 X 5.0SMDJ170A 5.0SMDJ170CA 5PHR 5BHR 170.0 189.00 209.00 1 275.0 18.20 136.5 355.3 5 0.108 X For bidirectional type having V of 20 volts and less, the I limit is double. R R For parts without A , the V is ± 10% and V is 5% higher than with A parts BR C © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/05/18

Transient Voltage Suppression (TVS) Diodes Surface Mount – 5000W > 5.0SMDJ series I-V Curve Characteristics Uni-directional Bi-directional Ipp IT Vc VBRVR V Vc VBRVR IR V IRVF IR VRVBRVc IT IT Ipp Ipp P Peak Pulse Power Dissipation -- Max power dissipation PPM V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I) BR T V Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) C I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F Ratings and Characteristic Curves (T=25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating 1000 Voltage Transients W) TJ initial = Tamb K Voltage Across TVS wer ( 100 nt Po 5kW at 10/1000µs, 25°C urre se ge or C Current Through TVS ak Pul 10 a e Volt -PM PPP 1 0.001 0.01 0.1 1 10 t-Pulse Width (ms) Time d continues on next page. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/05/18

Transient Voltage Suppression Diodes Surface Mount – 5000W > 5.0SMDJ series Ratings and Characteristic Curves (T=25°C unless otherwise noted) (Continued) A Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 100 150 Pulse Power (P) or Current (I)PPPPDerating in Percentage % 24680000 - Peak Pulse Current, % IMRSM 15000 tr=1PI0PeµPasMke cVaHIlPuaPelMf Va(lI Pu P1a2eTPac0sM usuJ / rd1=)ltrsh02eeee50nfi W °0tpnC dµioedeisdtnceh tabc( wyt.yds hW ) R teiosar. E ev5d .0eteAh%ffieon orpemfde IaPkP M ak IPP e P td 0 0 0 25 50 75 100 125 150 175 0 1.0 2.0 3.0 4.0 TJ - Initial Junction Temperature (ºC) t-Time (ms) Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance 100000 100 W) Uni-direc(cid:31)onal V=0V °C/ 10000 Bi-direc(cid:31)onal V=0V nce ( 10 a d e pF) 1000 mp Cj( Uni/Bi-direc(cid:31)onal V=V al I 1 R m 100 er h T nt 0.1 e 10 si n a Tr 1 0.01 10 100 1000 0.001 0.01 0.1 1 10 100 1000 VBR-Reverse Breakdown Voltage(V) TP -Pulse Duration (s) Figure 7 - Maximum Non-Repetitive Peak Forward Figure 8 - Peak Forward Voltage Drop vs Peak Forward Surge Current Uni-Directional Only Current (Typical Values) 450 400 100 A) nt(350 M -Peak Forward Surve Curre112230505000000 IF-Peak Forward Current(A) 01.110 IFS 50 0.01 0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 0 1 10 100 VF-Peak Forward Voltage (V) Number of Cycles at 60 Hz © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/05/18

Transient Voltage Suppression (TVS) Diodes Surface Mount – 5000W > 5.0SMDJ series Soldering Parameters Lead–free Reflow Condition assembly TP tp - Temperature Min (T ) 150°C s(min) Ramp-up Critical Zone Pre Heat -- TTeimmep e(mraitnu rteo Mmaaxx) ((Ttss()max)) 6200 0–° C180 secs (T)ure Ts(mTaLx) tL TL to TP Atov epreaagke ramp up rate (Liquidus Temp (TA) 3°C/second max TemperatTs(min) Prethseat Ramp-down T to T - Ramp-up Rate 3°C/second max S(max) A - Temperature (T ) (Liquidus) 217°C Reflow A 25˚C t 25˚C to Peak - Time (min to max) (t) 60 – 150 seconds Time (t) s Peak Temperature (T) 260+0/-5 °C P Time within 5°C of actual peak 20 – 40 seconds Temperature (t) p Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (T) 8 minutes Max. Environmental Specifications P Do not exceed 280°C High Temp. Storage JESD22-A103 Physical Specifications HTRB JESD22-A108 Weight 0.007 ounce, 0.21 grams Temperature Cycling JESD22-A104 JEDEC DO214AB. Molded component Case over glass passivated junction MSL JEDEC-J-STD-020, Level 1 Color band denotes positive end Polarity (cathode) except Bidirectional. H3TRB JESD22-A101 Matte Tin-plated leads, Solderable per Terminal JESD22-B102 RSH JESD22-A111 Dimensions DO-214AB (SMC J-Bend) Inches Millimeters Cathode Band Dimensions (for uni-directional products only) Min Max Min Max A 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C A C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 B F - 0.008 - 0.203 G 0.305 0.320 7.750 8.130 H H 0.006 0.012 0.152 0.305 D I 0.129 - 3.300 - J K L J 0.094 - 2.400 - F K - 0.165 - 4.200 E I G L 0.094 - 2.400 - DimensSioonlds einr Pinacdhses and (millimeters) (all dimensions in mm) © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/05/18

Transient Voltage Suppression Diodes Surface Mount – 5000W > 5.0SMDJ series Part Numbering System Part Marking System 5.0SMDJ XXXCA Cathode Band (for uni-directional products only) F 5% V VOLTAGE TOLERANCE Littelfuse Logo BR BI-DIRECTIONAL XXX V VOLTAGE R Marking Code SERIES YMXXX Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Options Component Packaging Packaging Part number Quantity Package Option Specification 5.0SMDJxxxXX DO-214AB 3000 Tape & Reel - 16mm tape/13” reel EIA STD RS-481 5.0SMDJxxxXX-T7 DO-214AB 500 Tape & Reel – 16mm tape/7” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) 0.63 (16.0) Cathode 0.315 0.059 DIA Cover tape (8.0) (1.5) Optional 7” 7.0 (187) 13” 13.0 (330) Dimensions are in inches 0.80 (20.2) (and millimeters). Arbor Hole Dia. Direction of Feed 0.65 (16.4) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/05/18