Features NT MPLIA ■ RoHS compliant* ■ Marking on contrasting background for HS CO ■ Low profi le is compatible with DIPs permanent identifi cation *Ro ■ Wide assortment of pin packages enhances design fl exibility ■ Ammo-pak packaging available ■ Recommended for rosin fl ux and solvent clean or no clean fl ux processes 4600X Series - Thick Film Conformal SIPs Product Characteristics Package Power Temp. Derating Curve Product Dimensions Resistance Range ....................10 ohms to 10 megohms A 5.08 Maximum Operating Voltage .........100 V 3.50 MAXIMUM (M.2A0X0.) Temperature Coeffi cient of Resistance 50 Ω to 2.2 megohms ...±100 ppm/°C 3.00 below 50 Ω ....................±250 ppm/°C PIN #1 REF. T RCea sRbis oTtvroaerc T2ko.i2nle gmr a..en..gc.m.oe..ha ....mx....i..ms.... ...u......m........;±.. ..e2.Sq55eu00ea pp lc ppvirammcluu//°°eitCCss WATTS22..5000 4614X BOTH (EM..N50A02DX80S. ±±( 1...000.24504902))TYP. (.1330.3 + +.002.50//- 0-..0312) Insulation Resistance 4612X 2.54 ± .07 ................10,000 megohms minimum 1.50 4610X (.100T ±Y P.0.03*) Dielectric Withstanding Voltage 1.00 4608X NON-ACCUM. CPouinn t mA mM a(Ixnicmhuems) ...........................................200 VRMS 4606X 4 10.11 (.398) Operating Temperature 4604X 5 12.65 (.498) ...............................-55 °C to +125 °C .50 2.49 6 15.19 (.598) MAX. 7 17.73 (.698) (.098) 8 20.27 (.798) Environmental Characteristics 9 22.81 (.898) 0 25 70 125 10 25.35 (.998) TESTS PER MIL-STD-202 ........ΔR MAX. AMBIENT TEMPERATURE ( ° C ) 11 27.89 (1.098) 12 30.43 (1.198) SLohaodrt LTiifme .e.. .O...v..e..r.l.o..a..d.. ................................±±01..2050 %% (..205140 ±± ..005002)MAX. 1134 3325..9571 ((11..239988)) Package Power Ratings (Watts) Moisture Resistance .................±0.50 % Resistance to Soldering Heat Ambient Ambient Maximum package length is equal to 2.54mm (.100") times the ..............................................±0.50 % Temp. Temp. number of pins, less .005mm (.002"). Terminal Strength .....................±0.25 % Pkg. 70 °C Pkg. 70 °C Thermal Shock .........................±0.25 % Governing dimensions are in metric. Dimensions in parentheses 4604X 0.50 4610X 1.25 are inches and are approximate. Physical Characteristics 4605X 0.63 4611X 1.38 *Terminal centerline to centerline measurements made at point of Flammability ........Conforms to UL94V-0 4606X 0.75 4612X 1.50 emergence of the lead from the body. 4607X 0.88 4613X 1.63 Body Material ......................Epoxy resin 4608X 1.00 4614X 1.75 Standard Packaging 4609X 1.13 ..................Bulk, Ammo-pak available For Standard Values Used in Capacitors, Inductors, and Resistors, How To Order Typical Part Marking click here. 46 06 X - 101 - 222 __ LF Represents total content. Layout may vary. Model (46 = Conformal Part Number Marking SIP) 4606X-101-RC 6X-1-RC Number of Pins Physical Confi guration 4608X-102-RC 8X-2-RC (X = Thick Film Low Profi le) 4610X-104-RC/RC 10X-4-RC/RC Electrical Confi guration • 101 = Bussed RC = ohmic value, 3-digit resistance • 102 = Isolated code. • 104 = Dual Terminator • AP1 = Bussed Ammo** • AP2 = Isolated Ammo** CIRCUIT NUMBER OF PINS • AP4 = Dual Ammo** 6X-2-222 RESISTANCE Resistance Code YYWW CODE • First 2 digits are signifi cant PIN ONE DATE CODE • Third digit represents the INDICATOR number of zeros to follow. MANUFACTURER'S TRADEMARK Resistance Tolerance • Blank = ±2 % (see “Resistance Tolerance” on next page for resistance range) • F = ±1 % (100 ohms - 5 megohms) Terminations • All electrical confi gurations EXCEPT 104 & AP4: LF = Sn/Ag/Cu-plated (RoHS compliant) • ONLY electrical confi gurations 104 & AP4: L = Sn/Ag/Cu-plated (RoHS compliant) Consult factory for other available options. **Available for packages with 10 pins or less. *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications.

For information on specifi c applications, download Bourns’ application notes: ■ DRAM Applications ■ Dual Terminator Resistor Networks ■ R/2R Ladder Networks ■ SCSI Applications 4600X Series - Thick Film Conformal SIPs Isolated Resistors (102 Circuit) Bussed Resistors (101 Circuit) Dual Terminator (104 Circuit) Model 4600X-102-RC Model 4600X-101-RC Model 4600X-104-R1/R2 4, 6, 8, 10, 12, 14 Pin 4 through 14 Pin 4 through 14 Pin ... R2 R2 R2 R2 R2 R2 1 4 6 12 14 1 14 R1 R1 R1 R1 R1 R1 1 8 These models incorporate 2 to 7 These models incorporate 3 to 13 The 4608X-104 (shown above) is an 8- isolated thick-fi lm resistors of equal thick-fi lm resistors of equal value, each pin confi guration and terminates 6 lines. value, each connected between two connected between a common bus Pins 1 and 8 are common for ground pins. (pin 1) and a separate pin. and power, respectively. Twelve thick- fi lm resistors are paired in series be- Resistance Tolerance Resistance Tolerance tween the common lines (pins 1 and 8). 10 ohms to 49 ohms ..................±1 ohm 10 ohms to 49 ohms ..................±1 ohm 50 ohms to 5 megohms ...............±2 %* 50 ohms to 5 megohms ...............±2 %* Resistance Tolerance Above 5 megohms ........................±5 % Above 5 megohms ........................±5 % Below 100 ohms .......................±2 ohms 100 ohms to 5 megohms .............±2 %* Power Rating per Resistor Power Rating per Resistor Above 5 megohms ........................±5 % At 70 °C ..................................0.30 watt At 70 °C ..................................0.20 watt Power Rating per Resistor Power Temperature Derating Curve Power Temperature Derating Curve At 70 °C ..................................0.20 watt .60 .60 Power Temperature Derating Curve .50 .50 .60 .40 .40 .50 ATTS.30 ATTS.30 .40 W.20 W.20 TS.30 .10 .10 AT W .20 0 25 70 125 0 25 70 125 AMBIENT TEMPERATURE ( ° C ) AMBIENT TEMPERATURE ( ° C ) .10 0 25 70 125 AMBIENT TEMPERATURE ( ° C ) Popular Resistance Values (101, 102 Circuits)** Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code Popular Resistance Values (104 Circuit)** 10 100 180 181 1,800 182 15,000 153 120,000 124 22 220 220 221 2,000 202 18,000 183 150,000 154 Resistance 27 270 270 271 2,200 222 20,000 203 180,000 184 Ohms Code 33 330 330 331 2,700 272 22,000 223 220,000 224 R1 R2 R1 R2 39 390 390 391 3,300 332 27,000 273 270,000 274 160 240 161 241 47 470 470 471 3,900 392 33,000 333 330,000 334 180 390 181 391 56 560 560 561 4,700 472 39,000 393 390,000 394 220 270 221 271 68 680 680 681 5,600 562 47,000 473 470,000 474 220 330 221 331 82 820 820 821 6,800 682 56,000 563 560,000 564 330 390 331 391 100 101 1,000 102 8,200 822 68,000 683 680,000 684 330 470 331 471 120 121 1,200 122 10,000 103 82,000 823 820,000 824 3,000 6,200 302 622 150 151 1,500 152 12,000 123 100,000 104 1,000,000 105 * ±1 % tolerance is available by adding suffi x code “F” after the resistance code. **Non-standard values available, within resistance range. REV. 04/10 Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications.