Features n RoHS compliant* n Marking on contrasting background for permanent identification n Low profile is compatible with DIPs n Wide assortment of pin packages enhances design flexibility n Ammo-pak packaging available n Recommended for rosin flux and solvent clean or no clean flux processes 4600X Series - Thick Film Conformal SIPs 4600X PACKAGE POWER TEMPERATURE Product Characteristics Package Power Temp. Derating Curve Product Dimensions DERATING CURVE Resistance Range 5.08 ....................10 ohms to 10 megohms MAXAIMUM (.200) Maximum Operating Voltage .........100 V 3.50 MAX. Temperature Coefficient of Resistance 50 Ω to 2.2 megohms .....±100 ppm/°C 3.00 PIN #1 below 50 Ω .....................±250 ppm/°C REF. TCaRbo Tvrea c2k.2in gm..e..g..o..h..m...s................±..2.5500 ppppmm//°°CC TTS2.50 BOTH EMNADXS.(1.0.2449) 3.3 +0.5/-0.3 maximum; equal values WA2.00 0.50 ± 0.10TYP. (.130 +.020/ -.012) Resistor Tolerance ...............See circuits 4614X (.020 ± .004) Insulation Resistance 4612X 2.54 ± .07 1.50 (.100 ± .003*) ................10,000 megohms minimum 4610X TYP. Dielectric Withstanding Voltage 1.00 4608X NON-ACCUM. CPouinn t mAm M (aInxicmhuesm) ...........................................200 VRMS 4606X 4 10.11 (.398) Operating Temperature 4604X 5 12.65 (.498) ................................-55 °C to +125 °C .50 (2.0.4998)MAX. 67 1157..1793 ((..569988)) 8 20.27 (.798) Environmental Characteristics 0 25 70 125 190 2225..8315 ((..899988)) TESTS PER MIL-STD-202 ......∆R MAX. AMBIENT TEMPERATURE ( ϒ C ) 11 27.89 (1.098) 12 30.43 (1.198) Short Time Overload..................±0.25 % .254 ± .050 MAX. 13 32.97 (1.298) Load Life ....................................±1.00 % (.010 ± .002) 14 35.51 (1.398) Package Power Ratings (Watts) Moisture Resistance ..................±0.50 % Resistance to Soldering Heat Ambient Ambient Maximum package length is equal to 2.54mm (.100") times the ...............................................±0.50 % Temp. Temp. number of pins, less .005mm (.002"). Terminal Strength ......................±0.25 % Pkg. 70 °C Pkg. 70 °C Governing dimensions are in metric. Dimensions in parentheses Thermal Shock ..........................±0.25 % 4604X 0.50 4610X 1.25 are inches and are approximate. Physical Characteristics 4605X 0.63 4611X 1.38 *Terminal centerline to centerline measurements made at point of 4606X 0.75 4612X 1.50 emergence of the lead from the body. Flammability ........Conforms to UL94V-0 4607X 0.88 4613X 1.63 Body Material.......................Epoxy resin 4608X 1.00 4614X 1.75 Standard Packaging 4609X 1.13 ..................Bulk, Ammo-pak available For Standard Values Used in Capacitors, Inductors, and Resistors, How To Order Typical Part Marking click here. 46 06 X - 101 - 222 __ LF Represents total content. Layout may vary. Model (46 = Conformal Part Number Marking SIP) 4606X-101-RC 6X-1-RC Number of Pins Physical Configuration 4608X-102-RC 8X-2-RC (X = Thick Film Low Profile) 4610X-104-RC/RC 10X-4-RC/RC Electrical Configuration • 101 = Bussed RC = ohmic value, 3-digit resistance • 102 = Isolated code. • 104 = Dual Terminator • AP1 = Bussed Ammo** • AP2 = Isolated Ammo** NUMBER OF PINS CIRCUIT • AP4 = Dual Ammo** RESISTANCE Resistance Code 6 X -Y2Y-2W2W2(cid:27) CODE • First 2 digits are significant PIN ONE DATE CODE • Third digit represents the INDICATOR MANUFACTURER'S number of zeros to follow. TRADEMARK Resistance Tolerance • Blank = ±2 % (see “Resistance Tolerance” on next page for resistance range) • F = ±1 % (100 ohms - 5 megohms) Terminations • All electrical configurations EXCEPT 104 & AP4: LF = Sn/Ag/Cu-plated (RoHS compliant) • ONLY electrical configurations 104 & AP4: WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov L = Sn/Ag/Cu-plated (RoHS compliant) *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Consult factory for other available options. Specifications are subject to change without notice. **Available for packages with 10 pins or less. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page o f this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

For information on specific applications, download Bourns’ application notes: n DRAM Applications n Dual Terminator Resistor Networks n R/2R Ladder Networks n SCSI Applications 4600X Series - Thick Film Conformal SIPs Isolated Resistors (102 Circuit) Bussed Resistors (101 Circuit) Dual Terminator (104 Circuit) Model 4600X-102-RC Model 4600X-101-RC Model 4600X-104-R1/R2 4, 6, 8, 10, 12, 14 Pin 4 through 14 Pin 4 through 14 Pin ISOLATED RESISTORS 102 CIRCUIT BUSSED RESISTORS 101 CIRCUIT DUAL TERMINATOR 104 CIRCUIT ... R2 R2 R2 R2 R2 R2 1 4 6 12 14 1 14 R1 R1 R1 R1 R1 R1 1 8 These models incorporate 2 to 7 These models incorporate 3 to 13 The 4608X-104 (shown above) is an 8- isolated thick-film resistors of equal thick-film resistors of equal value, each pin configuration and terminates 6 lines. value, each connected between two connected between a common bus Pins 1 and 8 are common for ground pins. (pin 1) and a separate pin. and power, respectively. Twelve thick- film resistors are paired in series be- Resistance Tolerance Resistance Tolerance tween the common lines (pins 1 and 8). 10 ohms to 49 ohms ...................±1 ohm 10 ohms to 49 ohms ...................±1 ohm 50 ohms to 5 megohms ................±2 %* 50 ohms to 5 megohms ................±2 %* Resistance Tolerance Above 5 megohms..........................±5 % Above 5 megohms..........................±5 % Below 100 ohms .......................±2 ohms 100 ohms to 5 megohms ..............±2 %* Power Rating per Resistor Power Rating per Resistor Above 5 megohms..........................±5 % At 70 °C ..................................0.30 watt At 70 °C ..................................0.20 watt Power Rating per Resistor Power Temperature Derating Curve Power Temperature Derating Curve At 70 °C ..................................0.20 watt .60 .60 Power Temperature Derating Curve .50 .50 .60 .40 .40 .50 WATTS.30 WATTS.30 .40 .20 .20 S T.30 T .10 .10 WA .20 0 25 70 125 0 25 70 125 AMBIENT TEMPERATURE ( ϒ C ) AMBIENT TEMPERATURE ( ϒ C ) .10 0 25 70 125 AMBIENT TEMPERATURE ( ϒ C ) Popular Resistance Values (101, 102 Circuits)** Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code Popular Resistance Values (104 Circuit)** 10 100 180 181 1,800 182 15,000 153 120,000 124 22 220 220 221 2,000 202 18,000 183 150,000 154 Resistance 27 270 270 271 2,200 222 20,000 203 180,000 184 Ohms Code 33 330 330 331 2,700 272 22,000 223 220,000 224 R1 R2 R1 R2 39 390 390 391 3,300 332 27,000 273 270,000 274 160 240 161 241 47 470 470 471 3,900 392 33,000 333 330,000 334 180 390 181 391 56 560 560 561 4,700 472 39,000 393 390,000 394 220 270 221 271 68 680 680 681 5,600 562 47,000 473 470,000 474 220 330 221 331 82 820 820 821 6,800 682 56,000 563 560,000 564 330 390 331 391 100 101 1,000 102 8,200 822 68,000 683 680,000 684 330 470 331 471 120 121 1,200 122 10,000 103 82,000 823 820,000 824 3,000 6,200 302 622 150 151 1,500 152 12,000 123 100,000 104 1,000,000 105 * ±1 % tolerance is available by adding suffix code “F” after the resistance code. **Non-standard values available, within resistance range. REV. 10/1/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap- plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R