Model 407 Surface Mount Quartz Crystal Features  Hermetic Ceramic Surface Mount Package  Fundamental and 3rd Overtone Crystal Design  Frequency Range 6 – 133MHz  Frequency Tolerance, ±30ppm Standard Part Dimensions:  Frequency Stability, ±50ppm Standard 7.0 × 5.0 × 1.3mm • 104.78mg  Operating Temperature Range to -40°C to +85°C  Tape and Reel Packaging, EIA-418 Standard Frequencies - 6.00MHz - 27.00MHz - 60.00MHz Applications - 8.00MHz - 32.00MHz - 66.666MHz - 10.00MHz - 48.00MHz - 98.304MHz  Wireless Communications  USB Interfaces - 25.00MHz - 50.00MHz - 125.00MHz  Broadband Access  Test and Measurement * See Page 5 for additional developed frequencies.  FPGA/Microcontrollers  Consumer Electronics Check with factory for availability of frequencies not listed.  Computer Peripherals  Portable Equipment Description CTS Model 407 incorporates a high Q quartz resonator and is ideal for supporting a wide range of commercial and industrial applications. Ordering Information Mode of Tolerance Load Frequency Model Temperature Stability/Temperature Range Oscillation @ +25°C Capacitance [MHz] 407 F 3 5 D XXXMXXXX Code Mode Code Stability Code Stability Code Stability Code Frequency F Fundamental -20°C to +70°C -30°C to +85°C -40°C to +85°C Frequency 1 T 3rd Overtone 1 ±10ppm R ±10ppm - - X ±15ppm Y ±15ppm W ±15ppm 2 ±20ppm N ±20ppm 6 ±20ppm 3 ±30ppm 4 ±30ppm 7 ±30ppm 5 ±50ppm 8 ±50ppm 9 ±50ppm Code Tolerance Code Capacitance Code Capacitance 1 ±10ppm K 8pF D 18pF X ±15ppm J 9pF E 20pF 2 ±20ppm A 10pF F 24pF 3 ±30ppm L 12pF G 30pF C 16pF S Series Notes: 1]Frequency is recorded with 3 leading digits before the "M" and 4 significant digits after the "M" [including zeroes]. (Ex. XXXMXXXX [016M3840], XXXMXXXX There are frequencies that have significant digits after the "M" that exceed the 4 digits. The remaining digits will be truncated from the CTS part number, but the factory will calibrate to the full frequency desired. Examples below; P/N Frequency = Actual Frequency 13M5537 = 13.553750MHz 14M3181 = 14.318180MHz 16M6666 = 16.666670MHz 28M6363 = 28.636360MHz Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification. DOC# 008-0261-0 Rev. I Page 1 of 5 ©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

Model 407 Surface Mount Quartz Crystal Electrical Specifications Operating Conditions PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT -20 +70 Operating Temperature TA - -30 +25 +85 °C -40 +85 Storage Temperature T - -40 - +100 °C STG Frequency Stability PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT Frequency Range f - 6 - 133 MHz O Frequency Tolerance Δf/f @ +25°C 10, 15, 20 or 30 ±ppm O Frequency Stability Δf/f Referenced to +25°C reading 10, 15, 20, 30 or 50 ±ppm 25 Aging Δf/f Typical per year @ +25°C -3 - 3 ppm 0 Crystal Parameters PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT Operating Mode - - Fundamental - Crystal Cut - - AT-Cut Strip - Load Capacitance C - See Ordering Information pF L Shunt Capacitance C - - - 7.0 pF 0 Series Resistance 6MHz - <10MHz - - 80 10MHz - <15MHz - - 70 Fundamental R Ω 1 15MHz - <20MHz - - 50 20MHz - 45MHz - - 40 35MHz - <44MHz - - 80 44MHz - <50MHz - - 60 3rd Overtone R Ω 1 50MHz - <80MHz - - 60 80MHz - <133MHz - - 60 Drive Level DL - - 10 200 µW Insulation Resistance R +100Vdc ±15Vdc 500 - - MΩ i Δf/f0 - Frequency deviation referenced to nominal frequency. Δf/f25 - Frequency deviation over operating temperature range, referenced to +25°C frequency. DOC# 008-0261-0 Rev. I Page 2 of 5 ©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

Model 407 Surface Mount Quartz Crystal Mechanical Specifications Package Drawing Marking Information 1. ** – Manufacturing Site Code. 2. YYWW – Date Code; YY = year, WW = week. 3. xxxx – Frequency Code. CTS**YYWW 3-digits, frequencies below 100MHz ● xxxx 4-digits, frequencies 100MHz or greater [See document 016-1454-0, Frequency Code Tables.] Recommended Pad Layout Notes 1. Terminations #2, #4 and metal lid are connected internally. End user may connect these pins to circuit ground for EMI suppression. 2. JEDEC termination code (e4). Barrier-plating is nickel [Ni] with gold [Au] flash plate. 2. Reflow conditions per JEDEC J-STD-020; +260°C maximum, 20 seconds. 3. MSL = 1. DOC# 008-0261-0 Rev. I Page 3 of 5 ©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

Model 407 Surface Mount Quartz Crystal Packaging - Tape and Reel Tape Drawing Reel Drawing Notes 1. Device quantity is 1k pieces maximum per 180mm reel. 2. Complete CTS part number, frequency value, date code and manufacturing site code information must appear on reel and carton labels. DOC# 008-0261-0 Rev. I Page 4 of 5 ©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

Model 407 Surface Mount Quartz Crystal Addendum Additional Developed Frequencies – MHz FREQUENCY FREQUENCY FREQUENCY FREQUENCY FREQUENCY FREQUENCY FREQUENCY FREQUENCY CODE CODE CODE CODE 7.372800 073 16.384000 163 32.768000 327 75.000000 750 7.600000 A76 16.800000 168 33.000000 330 77.760000 777 7.680000 076 16.934400 169 33.333000 33E 80.000000 800 8.192000 81 18.000000 180 33.333300 33A 81.000000 810 9.600000 096 18.432000 184 49.152000 491 83.000000 830 9.830400 098 19.200000 192 51.840000 518 83.333300 83B 10.245000 10A 19.660800 19B 54.000000 540 84.000000 840 10.368000 103 19.800000 198 55.000000 550 90.000000 900 11.059200 111 20.000000 200 58.000000 580 100.000000 1000 11.289600 11D 20.118400 20E 59.000000 590 106.250000 1062 12.000000 120 22.579200 225 62.500000 625 120.000000 1200 12.288000 122 24.000000 240 64.000000 640 12.500000 125 24.576000 24C 65.000000 650 13.000000 130 26.000000 260 66.000000 660 13.560000 13C 28.322000 28D 66.666600 66D 14.318180 143 28.375000 283 66.666670 66F 14.745600 147 28.636360 286 70.000000 700 15.360000 153 29.491200 29B 72.000000 720 16.000000 160 30.000000 300 74.250000 742 Frequency Codes for Cover Page Table – MHz FREQUENCY FREQUENCY FREQUENCY FREQUENCY FREQUENCY FREQUENCY CODE CODE CODE 6.000000 060 27.000000 270 60.000000 600 8.000000 080 32.000000 320 66.666000 666 10.000000 100 48.000000 480 98.304000 983 25.000000 250 50.000000 500 125.000000 1250 DOC# 008-0261-0 Rev. I Page 5 of 5 ©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.