Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series 392 Series, TE5 Time-Lag Fuse RoHS Pb PS E Description TE5 Fuse, Time-Lag type, 250V rated, designed in accordance to IEC 60127-3. Features • Reduced PCB space • Shock safe casing requirements • Vibration resistant • Direct solderable or • Halogen free, Lead-free plug-in versions and RoHS compliant • Internationally approved • Red Phosphorus Free • Low internal resistance Applications Agency Approvals • Battery Chargers • Industrial Controllers Agency Agency File Number Ampere Range • Consumer Electronics • Chargers • Power supplies 126983 0.28A - 6.3A* Additional Information 1606079 0.8A - 6.3A E67006 0.28A - 6.3A PS JET1896-31007-2002 1A - 5A E Datasheet Resources Samples CQC07012021162 0.8A - 6.3A Electrical Characteristics for Series SU05024 - 7013A 0.8A SU05024 - 7014B 1A - 2.5A % of Ampere SU05024 - 7015B 3.15A Rating Opening Time SU05024 - 7016B 4A SU05024 - 7017B 5A 150% 1 Hour, Min. SU05024 - 7018B 6.3A 210% 120 s, Max. 275% 400 ms Min. ; 10 Sec. Max. *Red Phosphorus Free from 0.28A to 5A. 400% 150 ms Min. ; 3 Sec. Max. 1000% 20 ms Min. ; 150 ms Max. Electrical Characteristic Specifications by Item Nominal Voltage Power Melting Agency Approvals Rated Amp Voltage Breaking Cold Drop Dissipation Integral Current Code Rating Capacity Resistance 1.0×IN 1.5×IN 10×IN PES (Ohms) max. (mV) max. (mW) max. (A2s) 280 mA 0280 250V 35A@250VAC 0.3300 115 168 0.048 x x 800 mA 0800 250V 0.0960 110 280 5.120 x x x x x 1.00 A 1100 250V 0.0715 115 400 8.00 x x x x x x 1.25 A 1125 250V 0.0569 100 500 11.95 x x x x x x 25A@250VAC 1.60 A 1160 250V 0.0400 95 600 18.43 x x x x x x 2.00 A 1200 250V 0.0298 90 700 29.00 x x x x x x 2.50 A 1250 250V 0.0240 85 750 47.81 x x x x x x 3.15 A 1315 250V 32A@250VAC 0.0170 80 1100 78.39 x x x x x x 4.00 A 1400 250V 40A@250VAC 0.0128 75 1200 126.40 x x x x x x 5.00 A 1500 250V 50A@250VAC 0.0101 70 1000 106.25 x x x x x x 6.30 A 1630 250V 63A@250VAC 0.0077 65 1200 160.74 x x x x x Notes: 1) 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 2) Resistance is measured at 10% of rated current, 25ºC. © 2018 Littelfuse, Inc. Application testing is strongly recommended.Specifications are subject to change without notice. Revised: 12/10/18

Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series Temperature Re-rating Curve Average Time Current Curves 140 0.280A 0.800A1.00A1.25A1.60A2.00A2.50A3.15A4.00A5.00A6.30A 120 100000 NG100 TI A R 80 10000 OF NT 60 E ERC 40 23ºC 1000 P 20 0 S100 D -60 -40 -20 0 20 40 60 80 100 120 N O AMBIENTTEMPERATURE(°C) EC S N 10 E I M Note: TI 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1 0.1 0.01 0.001 0.20 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering 300 Recommended Process Parameters: Measured on bottom side of board 111112222202468024680000000000 ( PD re eTTPpeehermmneedhasppe Wtoee:anrrat aaF Tvttluuuiexmrr eeAPec aMMt:irvaaiantmixoiminme Tuteuemmmrp:e:rature) (116T05y0Lp00-ei1c°°aa8CCld 0In- dsFuersectreoy nRRdeecscomommemndeatniodn)ation C) - 80 Solder Pot Temperature: 260°C Maximum Temperature (° 24600000 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 RSSeocoldoldemer rmD Iwreoennldl T Teeidmm eHp:earnadtu-Sreo: l3d5e0r °2PC-a5 r+ sa/em-c 5oe°ntCde srs: Time (Seconds) Heating Time: 5 seconds max. Preheat Time Cooling Time Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/10/18

Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series Product Characteristics Base/Cap: Thermoplastic Operating Temperature –40ºC to +125ºC (Consider re-rating) Materials Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated –40ºC to +85ºC/21 days Climatic Category (IEC 60068-1, -2-1, -2-2, -2-78) Lead Pull Strength 10 N (IEC 60068-2-21) +10ºC to +60ºC 260ºC, ≤ 3 sec. (Wave) Relative humidity ≤ 75% yearly Solderability Stock Condition 350ºC, ≤ 3 sec. (Soldering iron) average, without dew, maximum value for 30 days - 95% Soldering Heat 260ºC, 10 sec. (IEC 60068-2-20) 24 cycles at 15 min. each Resistance 350ºC, ≤ 3 sec. (Soldering iron) (IEC 60068-2-6) Vibration Resistance 10 – 60Hz at 0.75mm amplitude 60 – 2000Hz at 10g acceleration Dimensions Part Numbering System 8.5 max.4 392 xxxx 0000 8 x. a m Series 0.6 n 1.5 L mi Amp Code 5 0. Refer to Amp Code column of 5.08 0.1 Electrical Characteristics Table + 1 Packaging Code 0000 Tape/Ammopack (1,400 pcs.) Holes in the printed circuit board 0440 Short Leads - Bulk (1,400 pcs.) Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packaging Quantity & Packaging Option Packaging Specification Quantity Taping Width Packaging Code Tape and Ammopack N/A 1,400 0000 N/A Short Leads N/A 1,400 0440 N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/10/18

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: L ittelfuse: 39212500000 39211250000 39208000000 39214000440 39212000440 39211000440 39213150000 39208000440 39214000000 39212500440 39212000000 39211250440 39211000000 39211600000 39211600440 39202800000 39213150440 39215000000 39216300000 39215000440 39000320000 38706300000