Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series 392 Series, TE5 Time-Lag Fuse RoHS Pb PS E Description The 392 Series is a TE5 Fuse. It is a time-lag fuse designed in accordance to IEC 60127-3, Standard Sheet 4. Features • Reduced PCB space • Red Phosphorus Free requirements • Conforms to EN/IEC/J/K • Direct solderable or 60127-1 and EN/IEC/J/K plug-in versions 60127-3 • Internationally approved • Conforms to GB/T 9364.1 and GB/T 9364.3 • Low internal resistance • Recognized to UL/CSA/ • Shock safe casing Agency Approvals NMX 248-1 and UL/CSA/ • Vibration resistant NMX 248-14 • Halogen free, Lead-free Agency Agency File Number Ampere Range and RoHS compliant 126983 0.28A - 6.3A* E67006 0.28A - 6.3A Applications N/A 0.28A - 6.3A • Battery Chargers • Industrial Controllers PS JET1896-31007-2002 1A - 5A E • Consumer Electronics • Chargers 2020970207000069 0.5A - 6.3A SU05024 - 7013A 0.8A • Power supplies SU05024 - 7014B 1A - 2.5A SU05024 - 7015B 3.15A SU05024 - 7016B 4A Electrical Characteristics for Series SU05024 - 7017B 5A SU05024 - 7018B 6.3A % of Ampere Rating Opening Time *Red Phosphorus Free from 0.28A to 5A. 150% 1 Hour, Min. Additional Information 210% 120 s, Max. 275% 400 ms Min. ; 10 Sec. Max. 400% 150 ms Min. ; 3 Sec. Max. 1000% 20 ms Min. ; 150 ms Max. Datasheet Resources Samples Electrical Characteristic Specifications by Item Power Melting Agency Approvals Nominal Cold Voltage Drop Rated Amp Voltage Breaking Dissipation Integral Resistance 1.0×I max. Current Code Rating Capacity (Ohms)1 (mNV) 1.5×IN 10×IN PES max. (mW) max. (A2s) 280 mA 280 250V 0.33 115 168 0.048 x x - - - x 500 mA 500 250V 0.163 105 125 2.175 x x - x x x 800 mA 800 250V 0.096 110 280 5.12 x x - x x x 1.0 A 1100 250V 0.0715 115 400 8.0 x x x x x x 35A@250Vac1 1.25 A 1125 250V 0.0569 100 500 11.95 x x x x x x 130A@250Vac2 1.6 A 1160 250V 0.04 95 600 18.43 x x x x x x 2.0 A 1200 250V 0.0298 90 700 29.0 x x x x x x 2.5 A 1250 250V 0.024 85 750 47.81 x x x x x x 3.15 A 1315 250V 0.017 80 1100 78.39 x x x x x x 40A@250Vac1 4.0 A 1400 250V 0.0128 75 1200 126.4 x x x x x x 50A@250Vac2 5.0 A 1500 250V 50A@250Vac1,2 0.0101 70 1000 106.25 x x x x x x 6.3 A 1630 250V 63A@250Vac1,2 0.0077 65 1200 160.74 x x - x x x Note: 1: Per EN/IEC/J/K 60127-1 and EN/IEC/J/K 60127-3 2: Per UL 248-1 and UL 284-14 Resistance is measured at 10% of rated current, 25DegC. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/18/20

Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series Temperature Re-rating Curve Average Time Current Curves 140 0.280A 0.500A 0.800A1.00A1.25A1.60A2.00A2.50A3.15A4.00A5.00A6.30A 120 100000 NG100 TI A R 80 10000 OF NT 60 E ERC 40 23ºC 1000 P 20 0 DS100 -60 -40 -20 0 20 40 60 80 100 120 N O AMBIENTTEMPERATURE(°C) EC S E IN 10 M Note: TI 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1 0.1 0.01 0.001 0.20 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 C) - Measured on bottom side of board 11111222228024680246800000000000 ( SPD ro eeTTPlpdeehreemmeenrhad pptPes:eeo aorrttaaWn TTtt Fuueiamlrrmuveexee p MMA: ePcraiatnaixrvtiaamiumtmrioueunem:m Ttee::mrperature) (1162T0506yp00-01i°°°cL8CCCae0l aIM nsddea-ucFxsoirtmernyedu R smReecocmommemndeantidona)tion mperature (° 246000 ReScooldmemr eDnwdeedl lH Taimnde-S:older Parameters: 2-5 seconds Te 00 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 SHoeladteinr gIr oTinm Tee:m 5p seercaotunrdes: m35a0x°.C +/- 5°C Time (Seconds) Note: These devices are not recommended for IR or Convection Reflow process. Preheat Time Cooling Time Dwell Time © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/18/20

Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series Product Characteristics Base/Cap: Thermoplastic Operating Temperature –40ºC to +125ºC (Consider re-rating) Materials Polyamide PA 6.6, UL 94 V-0 –40ºC to +85ºC/21 days Round Pins: Copper, Tin-plated Climatic Category (IEC 60068-1, -2-1, -2-2, -2-78) Lead Pull Strength 10 N (IEC 60068-2-21) +10ºC to +60ºC 260ºC, ≤ 3 sec. (Wave) Relative humidity ≤ 75% yearly average, Solderability Stock Condition 350ºC, ≤ 3 sec. (Soldering iron) without dew, maximum value for 30 days Soldering Heat 260ºC, 10 sec. (IEC 60068-2-20) - 95% Resistance 350ºC, ≤ 3 sec. (Soldering iron) 24 cycles at 15 min. each (IEC 60068-2-6) Vibration Resistance 10 – 60Hz at 0.75mm amplitude 60 – 2000Hz at 10g acceleration Dimensions Part Numbering System 8.5 max.4 392 xxxx 0000 8 x. ma Series 0.6 n 1.5 Amp Code L mi Refer to Amp Code column of 0.5 Electrical Characteristics Table 5.08 0.1 Packaging Code + 1 0000 Tape/Ammopack (1,400 pcs.) 0440 Short Leads - Bulk (1,400 pcs.) Holes in the printed circuit board Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packaging Quantity & Packaging Option Packaging Specification Quantity Taping Width Packaging Code Tape and Ammopack N/A 1,400 0000 N/A Short Leads N/A 1,400 0440 N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/18/20