Radial Lead Fuses TR5® > Time-Lag Fuse > 382 Series 382 Series, TR5® Fuse, Time-Lag RoHS Pb PS E Description The 382 Series are TE5 Time-Lag type Fuses, 250V rated, with enhanced breaking capacity and designed in accordance to IEC 60127-3. Features • Halogen free, Lead-free • Low internal resistance and RoHS compliant • Shock safe casing • Reduced PCB space • Vibration resistant requirements • Available from 1A to 10A • Direct solderable or plug-in versions Agency Approvals • 100A breaking capacity Agency Agency File Number Ampere Range • Internationally approved 40018249 1A - 4A 40018250 5A - 6.3A Applications 1609346 1A - 6.3A • Battery Chargers • Power supplies E67006 1A - 10A • Consumer Electronics • Industrial Controllers JET1896-31007-2001 1 - 5A PS E JET1896-31007-1006 6.3 - 10A 2007010207240344 1A - 4A Electrical Characteristics CQC07012020713 5A - 6.3A % of Opening Time Ampere 1A - 6.3A 8A - 10A SU05024-7003 1-2.5A Rating SU05024-7002 3.15A 150% 1 Hour, Min. 1 Hour, Min. SU05024-7001 4A 210% 2 Minutes, Max. 300 s, Max. SU05024-7004 5A SU05024-7005 6.3A 400 ms, Min. ; 275% 1 s, Min. ; 20 s, Max. 10 Sec., Max. 150 ms, Min. ; 150 ms, Min. ; 400% 3 Sec., Max. 3 Sec., Max. 1000% 20 ms, Min. ; 150 ms, Max. 20 ms, Min. ; 150 ms, Max. Additional Information Datasheet Resources Samples © 2018 Littelfuse, Inc. Application testing is strongly recommended.Specifications are subject to change without notice. Revised: 12/12/18

Radial Lead Fuses TR5® > Time-Lag Fuse > 382 Series Electrical Characteristics Nominal Voltage Power Melting Agency Approvals Amp Rated Voltage Breaking Cold Drop Dissipation Integral Code Current Rating Capacity Resistance 1.0×IN 1.5×IN 10×IN PES (Ohms) max. (mV) max. (mW) min. (A2s) 1100 1.00 A 250 V 0.0625 100 400 4.85 X X X X X X 1125 1.25 A 250 V 0.0500 95 465 6.88 X X X X X X 1160 1.60 A 250 V 0.0377 90 490 12.67 X X X X X X 1200 2.00 A 250 V 0.0280 85 670 17.80 X X X X X X 1250 2.50 A 250 V 0.0215 80 750 29.69 X X X X X X 100A 1315 3.15 A 250 V 0.0176 75 900 45.35 X X X X X X @250VAC 1400 4.00 A 250 V 0.0138 70 1200 72.00 X X X X X X 1500 5.00 A 250 V 0.0108 65 1250 121.25 X X X X CQC X 1630 6.30 A 250 V 0.0076 65 1400 148.84 X X X X CQC X 1800 8.00 A 250 V 0.0059 63 1600 233.60 X X 2100 10.00 A 250 V 0.0042 57 1600 365.00 X X Notes: 1. 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 2. Resistance is measured at 10% of rated current, 25°C. TTeemmppeerraattuurree RRee-rraattiinngg CCuurrvvee AAvveerraaggee TTiimmee C Cuurrrreennt tC Cuurvrveess 114400 100000 1A1.25A1.6A2A2.5A3.15A4A5A6.3A8A10A 120 120 G 100 CENT OF RATINNTOFRATING18668000000 101000000 PERERCE 4400 232°3C°C P 20 20 100 0 DS -040°C -20°C 0°C 20°C 40°C 60°C 80°C N -40 -20 0 20 40 60 80 CO AMABMIEBNITENTTE TMEPMEPREARTAUTURERE(°C) N SE 10 E I M Note: TI 1. Rerating depicted in this curve is in addition to the standard derating of 25% for 1 continuous operation. 0.1 0.01 0.001 0.1 1 10 100 1000 CURRENT IN AMPERES © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18

Radial Lead Fuses TR5® > Time-Lag Fuse > 382 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 Measured on bottom side of board 111112222202468024680000000000 ( SPD roe eTTPpleedhermmneeedhraspp e WtPoee:anorrat aaF tTvttl Tuuuiexmerr eeAmPec aMMt:pirveaaiantrmixoaiminmte Tuuteuremmemrp::e:rature) (1162T05y06Lp00-0ei1c°°°aa8CCCld 0I n- MdsFuerasectxreoyim nRRdeuecsmcomommemndeatniodn)ation C) - 80 Solder Dwell Time: 2-5 seconds mperature (° 246000 Recommended Hand-Solder Parameters: Te 00 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 SHoeladteinr gIr Toinm Tee:m 5p seercaotunrdes: 3m5a0x°.C +/- 5°C Time (Seconds) Preheat Time Cooling Time Note: These devices are not recommended for IR or Dwell Time Convection Reflow process. Product Characteristics Base/Cap: Brown Thermoplastic Operating Temperature -40ºC to +85ºC (consider re-rating) Materials Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated -40ºC to +85ºC /21 days Climatic Category (IEC 60068-1,-2-1,-2-2,-2-78) Lead Pull Strength 10 N (IEC 60068-2-21) +10ºC to +60ºC Solderability 236500ººCC,, ≤≤ 31ss.. ((WSoaldvee)ring Iron) Stock Conditions RdeHw ≤, m75a%xim yeuamrl yv aalvueer afogre 3, 0w ithout days–95% Soldering Heat 260ºC, 10s. (IEC 60068-2-20) 24 cycles at 15 min. each Resistance 350ºC, 3s. (Soldering Iron) (IEC 60068-2-6) Vibration Resistance 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Dimensions Part Numbering System ∅ 8.5 382 xxxx 0000 8 x. Series a m Long Leads (L=18.8mm) Amp Code L ∅ 0.6 min Short Leads (L=4.3mm) REleefcetrr itcoa lA Cmhpar Cacotdeeri sctoiclusm Tnab olef 5 0. Packaging Code 5.08 +0.1 00040100 TSahpoert/ ALmeamdso p- aBcukl k(1 (,10,0000 0p cpsc.s).) 1 0430 Short Leads - Bulk (200 pcs.) LöcheHr ino dleers L eiinte rPplCattBe Holes in the printed circuit board Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width 382 Series Tape & Ammopack N/A 1,000 0000 N/A Short Leads N/A 1,000 0410 N/A Short Leads N/A 200 0430 N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18