3M™ Mini-Clamp II Socket Designed for Wiring Supplied from Europe and North America 2 mm, IDC, Wiremount, Optional Latch 373 Series • Designed to accommodate typical wiring specifications per Europe and North America suppliers. • Easy, quick and reliable IDC termination • Integrated cable retention • Design accepts multiple wire size diameter • No special tooling needed • Latch helps enable rugged field termination • Compact design saves board space • High number of mating cycles • RoHS compliant as declared in Regulatory Information Appendix notes E1 & C1 TS–2234-D Date Modified:3/10/2008 Sheet 1 of 4 Physical Insulation Material: Glass Reinforced Thermoplastic Body & Lower Cover, Transparent Thermoplastic Cover Flammability: UL 94V-0 Color: Black Body, Cover – White & Color (see Table 1) Contact Material: Copper Alloy Plating Underplating: 1.27-2.54 μm [50-100 μ”] Nickel Wiping Area: 0.2 μm [8 μ”] Minimum Gold with Lubricant IDC: 2.0-7.62 μm [80-300 μ”] Matte Tin Wire Accomodation: Copper Alloy, 7-19 Bare and Tinned Strands, 0.14-0.50 mm 2, 20-26 AWG Wire Insulation: Flexible Vinyl, Semi-Flexible Vinyl, Polyethylene, X-Linked Polyethylene, or PTFE For approved cables contact your local sales representative Marking: 3M Logo, Position Indicator, Wire gauge, Insulator Material Electrical Current Rating: 3.0 Amps Voltage Rating: 32 Volts Insulation Resistance: >1x106 Ω at 600 V DC Withstanding Voltage: 1000 V at Sea Level RMS Environmental Temperature Ratings: -20oC to 85oC UL File No: E68080 3M 3M and Scotchlok are trademarks of 3M Company. Interconnect Solutions For technical, sales or ordering information http://www.3M.com/interconnects/ call your local sales representative

3M™ Mini-Clamp II Socket Designed for Wiring Supplied from Europe and North America 2 mm, IDC, Wiremount, Optional Latch 373 Series No Latch # Positions Dim A 3 13.8 [.54] 4 15.8 [.62] Table 1 Wire OD 1.6 ~ 2.0 1.2 ~ 1.6 1.0 ~ 1.2 0.8 ~ 1.0 [.063~.079] [.047~.063] [.039~.047] [.031~.039] mm Part # [inch] 0.25-0.50 mm 2 A206 A165 A124 Tolerance Unless 20-24 AWG Noted Cover Color Gray Blue Green .0 .00 Part # 0.14-0.25 mm 2 B163 B122 B101 mm ±.1 ±.10 24-26 AWG [ ] Dimensions for Cover Color Orange Yellow Red Reference Only Ordering Information 373XX-XXXX-00E-MB Wire AWG & OD: AXXX = 0.25-0.50 mm 2 Positions 20-24 AWG 03 or 04 BXXX = 0.14-0.25 mm 2 24-26 AWG Wire OD – see Table 1 TS-2234-D Note: Terminate using common pliers or 3M TM Scotchlok TM Crimping Tools E-9BM or E-9E Sheet 2 of 4 3M 3M and Scotchlok are trademarks of 3M Company. Interconnect Solutions For technical, sales or ordering information http://www.3M.com/interconnects/ call your local sales representative

3M™ Mini-Clamp II Socket Designed for Wiring Supplied from Europe and North America 2 mm, IDC, Wiremount, Optional Latch 373 Series # Positions Dim A With Latch 3 23.4 [.92] 4 25.4 [1.0] Notes: Latch version for panel mounting See page 4 for panel cutout See „No Latch“ for other dimensions Table 2 Wire OD 1.6 ~ 2.0 1.2 ~ 1.6 1.0 ~ 1.2 0.8 ~ 1.0 mm [.063~.079] [.047~.063] [.039~.047] [.031~.039] [inch] Part # 0.25-0.50 mm 2 A206 A165 A124 Tolerance Unless 20-24 AWG Noted Cover Color Gray Blue Green .0 .00 Part # mm ±.1 ±.10 0.14-0.25 mm 2 B163 B122 B101 24-26 AWG [ ] Dimensions for Reference Only Cover Color Orange Yellow Red Ordering Information 373XX-XXXX-0PE-MB Wire AWG & OD: AXXX = 0.25-0.50 mm 2 Positions 20-24 AWG 03 or 04 BXXX = 0.14-0.25 mm 2 24-26 AWG Wire OD – see Table 2 TS-2234-D Note: Terminate using common pliers or 3M TM Scotchlok TM Crimping Tools E-9BM or E-9E Sheet 3 of 4 3M 3M and Scotchlok are trademarks of 3M Company. Interconnect Solutions For technical, sales or ordering information http://www.3M.com/interconnects/ call your local sales representative

3M™ Mini-Clamp II Socket Designed for Wiring Supplied from Europe and North America 2 mm, IDC, Wiremount, Optional Latch 373 Series TS-2234-D Sheet 4 of 4 3M 3M and Scotchlok are trademarks of 3M Company. Interconnect Solutions For technical, sales or ordering information http://www.3M.com/interconnects/ call your local sales representative

Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-D

Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-D

Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. Please recycle. Printed in USA. 1-800-225-5373 © 3M 2008. All rights reserved. www.3m.com/interconnects RIA-2217A-D 3M is a trademark of 3M Company.