34 THE www.vishay.com Vishay Spectrol Ten Turns Servo or Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) FEATURES • All electrical angles available up to: 3600° • Accurate linearity down to: ± 0.5 % • Very long life: 50M cycles for servo, 10M cycles for bushing • Non contacting technology: Hall effect; true power on sensor • Model dedicated to applications requiring long life QUICK REFERENCE DATA • Material categorization: For definitions of compliance Sensor type Multi Turn ROTATIONAL, hall effect please see www.vishay.com/doc?99912 Output type Wires or rear turrets Market appliance Industrial Dimensions 7/8" (22.2 mm) ELECTRICAL SPECIFICATIONS PARAMETER STANDARD SPECIAL Electrical angle 10 turns 3600° Any other angle upon request Linearity ± 1 % ± 0.5 % Supply voltage 5 V ± 10 % Other upon request DC Supply current < 16 mA for single < 32 mA for redundant Analog ratiometric 1 % to 99 % of V (other on request) Output signal supply or PWM 1 kHz, 10 % to 90 % duty cycle or SPI binary on 5 V or binary on 3.3 V Over voltage protection + 20 V DC Reverse voltage protection - 10 V DC Load resistance recommended Min. 1 k for analog output and PWM output Hysteresis static 10° on drive shaft MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel 3600° continuous Bearing type A sleeve bearing for bushing model/2 ball bearings for servo model Standard IP 50; other on request Resolution 12 bits for analog and PWM, 14 bits for SPI ORDERING INFORMATION/DESCRIPTION 34 THE B 1 A T A 2S22 XXXX BO 1 e1 MOUNTING NUMBER OF OUTPUT OUTPUT SHAFT SPECIAL LEAD MODEL LINEARITY PACKAGING TYPE SIGNALS TYPE SIGNAL TYPE REQUEST FINISH B: Bushing 1: Single A: ± 1 % T: Turrets A: Analog CW 2: 3.175 mm Box of S: Servo 2: Redundant B: ± 0.5 % Z: Custom B: Analog CCW 9: Special 1 piece W: Wires C: PWM CW P: Plain D: PWM CCW S: Slotted E: SPI CW (1) Z: Other type F: SPI CCW (1) G: Analog inverted slope H: PWM inverted slope K: SPI inverted slope (1) Z: Other output Shaft length from mounting face standard: 22 mm Note (1) SPI output  output type: Wires SAP PART NUMBERING GUIDELINES 34 THE S 2 B T C 2P12 XXXX SERVO 2 OUTPUT OUTPUT OUTPUT SHAFT SPECIAL MODEL LINEARITY TYPE SIGNALS TYPE SIGNAL TYPE REQUEST B: ± 0.5 % Revision: 25-Jul-12 1 Document Number: 57114 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

34 THE www.vishay.com Vishay Spectrol V ANALOG OUT Single Output (output signal code: “A”) 99 % Output S1 )ply p % Vsu 50 % (out V 1 % 0° 1800° 3600° Direction of Running (°) Redundant Output: with inverted slope (output signal code: “G”) 99 % Output S1 )ply p % Vsu 50 % (out V Output S2 1 % 0° 1800° 3600° Direction of Running (°) V PWM OUT Single Output: (output signal code: “C”) V out (% Vsupply) CW 97 % min. T high T Duty Cycle = high T T low 1.5 % max. 0 Time T: Periodicity V SPI OUT Notice on demand Output signal code: “E” if CW (single or redundant identical) Output signal code: “F” if CCW (single or redundant identical) Output signal code: “K” if CW (if redundant but inverted slope) Revision: 25-Jul-12 2 Document Number: 57114 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

34 THE www.vishay.com Vishay Spectrol MECHANICAL SPECIFICATIONS PARAMETER STANDARD SPECIAL Servo mounting type or bushing mount Mounting type (delivered with nut and washer) Housing Anodized aluminum Shaft guiding 2 ball bearings for servo and sleeve bearing for bushing Shaft Stainless steel Ø 3.175 Other on request Outputs Turrets Other on request Mechanical travel 3600° and no stop ENVIRONMENTAL SPECIFICATIONS Operating temperature range - 40 °C; + 85 °C > 10M of cycles for bushing Life > 50M of cycles for servo Rotational speed (max.) 1200 rpm Immunity to radiated electromagnetic disturbances 200 V/m 150 kHz/1 GHz, IEC 62132-2 part 2 (level A) Immunity to power frequency magnetic field 200 A/m 50 Hz/60 Hz, EN 61000-4-8 (level A) Radiated electromagnetic emissions 30 MHz/1 GHz < 30 dBμV/m, EN 61000-6-4 (level A) Contact discharges: ± 4 kV Electrostatic discharges Air discharges: ± 8 kV, EN 61000-4-2 Sine vibration on 3 axes 1.5 mm or 20 g from 10 Hz to 2000 Hz Mechanical shocks on 3 axes 50 g, 11 ms, half sine Revision: 25-Jul-12 3 Document Number: 57114 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

34 THE www.vishay.com Vishay Spectrol DIMENSIONS in millimeters Drawing for bushing mount type: 34THEB... 22 ± 0.8 22.1 ± 0.5 8.9 ± 0.2 1.6 ± 0.1 Label 3.2 ± 0.5 CW Ø 9.52 pas 0.79 3/8 - 32 UNEF 2A Ø 22.2 ± 0.25 Ø 3.175 + 0/- 0.013 0.5 at 45° Ø 10.3 Viewed from shaft side + 0/- 0.02 9 4.5 3 x Ø 1.7 ± 0.2 3.6 3.6 4 x Ø 1.7 ± 0.2 S2 S1 6.3 + - 4.7 + - 11.2 S 7.2 7.2 Single output Redundant output Revision: 25-Jul-12 4 Document Number: 57114 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

34 THE www.vishay.com Vishay Spectrol DIMENSIONS in millimeters Drawing for servo mount type: 34THES... 21.1 ± 0.5 12.7 ± 0.8 1.6 ± 0.1 1.6 ± 0.1 CW 1.6 ± 0.1 Ø 22.2 ± 0.25 Ø 3.175 + 0/- 0.013 Ø 19.05 + 0/- 0.025 Ø 19.4 ± 0.25 3.2 ± 0.5 Label 9 4.5 3 x Ø 1.7 ± 0.2 3.6 3.6 4 x Ø 1.7 ± 0.2 + - S2 S1 6.3 4.7 11.2 + - S 7.2 7.2 Single output Redundant output Revision: 25-Jul-12 5 Document Number: 57114 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

34 THE www.vishay.com Vishay Spectrol BUSHING AND SERVO TYPES Output by wires for output signal “SPI” single and redundant SINGLE SPI OUTPUT (servo and bushing) REDUNDANT SPI OUTPUT (servo and bushing) WIRE COLOR OUTPUT WIRE COLOR OUTPUT Yellow GND (-) Black V- Red MOSI Red V+ Green V (+) Yellow O/I 1 CC White SS Blue CLK 1 Blue SCLK White /SS 1 Green O/I 2 Violet CLK 2 Grey /SS 2 Revision: 25-Jul-12 6 Document Number: 57114 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: 34THES2BTA0P22 34THEB1ATA0S22 34THEB1ATA2S22 34THES1BTA2S22 34THES1ATA2S22 34THES2ATA2S13 34THEB1BWE2S22 34THEB1BTA2S22 34THES2ATA2S22 34THES2AWE2S22 34THES2BWF2S22 34THES2BTA2S22