A… Ferrules Without Insulating Collar According to DIN 46228-1 CLIPLINE Data Sheet 103088_00_en © PHOENIX CONTACT - 09/2006 Description A… ferrules without insulating collar are made from soft electrolytic copper (E-CU) with tin plating. The dimensions of the ferrules correspond to DIN46228-1. The ferrules enable correct crimping using appropriate crimping tools from PhoenixContact. Make sure you always use the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. This data sheet is valid for all products listed on the following page:

A… Dimensions and Ordering Data Ferrules Without Insulating Collar According to DIN 46228-1 Cross Section l l d s d Type Order No. Pcs./Pck. 1 2 1 2 0.25 mm2 5.0 mm – 0.8 mm 0.15 mm 1.7 mm A 0,25- 51 3202465 1000 0.25 mm2 7.0 mm – 0.8 mm 0.15 mm 1.7 mm A 0,25- 71 3202478 1000 0.34 mm2 7.0 mm – 0.9 mm 0.15 mm 1.8 mm A 0,34- 71 3009202 1000 0.5 mm2 6.0 mm 5.3 mm 1.0 mm 0.15 mm 2.1 mm A 0,5 - 6 3200218 1000 0.5 mm2 8.0 mm 7.3 mm 1.0 mm 0.15 mm 2.1 mm A 0,5 - 81 3202481 1000 0.5 mm2 10.0 mm 9.3 mm 1.0 mm 0.15 mm 2.1 mm A 0,5 -10 3202494 1000 0.75 mm2 6.0 mm 5.3 mm 1.2 mm 0.15 mm 2.3 mm A 0,75- 6 3200221 1000 0.75 mm2 8.0 mm 7.3 mm 1.2 mm 0.15 mm 2.3 mm A 0,75- 81 3202504 1000 0.75 mm2 10.0 mm 9.3 mm 1.2 mm 0.15 mm 2.3 mm A 0,75-10 3200234 1000 1 mm2 6.0 mm 5.3 mm 1.4 mm 0.15 mm 2.5 mm A 1 - 6 3200247 1000 1 mm2 8.0 mm 7.3 mm 1.4 mm 0.15 mm 2.5 mm A 1 - 81 3202517 1000 1 mm2 10.0 mm 9.3 mm 1.4 mm 0.15 mm 2.5 mm A 1 -10 3200250 1000 1.5 mm2 7.0 mm 6.0 mm 1.7 mm 0.15 mm 2.8 mm A 1,5 - 7 3200263 1000 1.5 mm2 10.0 mm 9.0 mm 1.7 mm 0.15 mm 2.8 mm A 1,5 -10 3200276 1000 1.5 mm2 12.0 mm 11.0 mm 1.7 mm 0.15 mm 2.8 mm A 1,5 -12 3202588 1000 1.5 mm2 15.0 mm 14.0 mm 1.7 mm 0.15 mm 2.8 mm A 1,5 -15 3202591 1000 1.5 mm2 18.0 mm 17.0 mm 1.7 mm 0.15 mm 2.8 mm A 1,5 -18 3202601 1000 2.5 mm2 7.0 mm 6.0 mm 2.2 mm 0.15 mm 3.4 mm A 2,5 - 7 3200289 1000 2.5 mm2 12.0 mm 11.0 mm 2.2 mm 0.15 mm 3.4 mm A 2,5 -12 3200292 1000 2.5 mm2 18.0 mm 17.0 mm 2.2 mm 0.15 mm 3.4 mm A 2,5 -18 3202821 1000 4 mm2 9.0 mm 8.0 mm 2.8 mm 0.2 mm 4.0 mm A 4 - 9 3200302 1000 4 mm2 12.0 mm 11.0 mm 2.8 mm 0.2 mm 4.0 mm A 4 -12 3200315 1000 4 mm2 18.0 mm 17.0 mm 2.8 mm 0.2 mm 4.0 mm A 4 -18 3202834 1000 6 mm2 10.0 mm 9.0 mm 3.5 mm 0.2 mm 4.7 mm A 6 -10 3202520 500 6 mm2 12.0 mm 11.0 mm 3.5 mm 0.2 mm 4.7 mm A 6 -12 3200328 500 10 mm2 12.0 mm 11.8 mm 4.5 mm 0.2 mm 5.8 mm A 10 -12 3200331 500 10 mm2 18.0 mm 16.8 mm 4.5 mm 0.2 mm 5.8 mm A 10 -18 3200344 500 16 mm2 12.0 mm 10.5 mm 5.8 mm 0.2 mm 7.5 mm A 16 -121 3200425 100 25 mm2 12.0 mm 10.0 mm 7.3 mm 0.2 mm 9.5 mm A 25 -12 3200357 100 25 mm2 15.0 mm 13.0 mm 7.3 mm 0.2 mm 9.5 mm A 25 -15 3200360 100 25 mm2 18.0 mm 16.0 mm 7.3 mm 0.2 mm 9.5 mm A 25 -18 3200373 100 25 mm2 20.0 mm 18.0 mm 7.3 mm 0.2 mm 9.5 mm A 25 -201 3200386 100 35 mm2 18.0 mm 16.0 mm 8.3 mm 0.2 mm 11.0 mm A 35 -18 3200399 100 35 mm2 20.0 mm 18.0 mm 8.3 mm 0.2 mm 11.0 mm A 35 -201 3200409 100 1 These ferrules are not included in DIN 46228-1. (cid:1) (cid:2) l = Total length (cid:1) 1 (cid:3) l = Sleeve length 2 (cid:2) d = Inside diameter of sleeve (cid:4) 1 (cid:3) s = Wall thickness of sleeve (cid:4) d = Inside diameter of collar 2 (cid:5) Figure1 Dimensions (tolerances according to DIN46228-1) © PHOENIX CONTACT 09/2006 103088_00_en PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany 2 Phone: +49 - 52 35 - 30 0 • Fax: +49 - 52 35 - 34 12 00 www.phoenixcontact.com