USER GUIDE TB-9039 Grounding Accessories 3000 Series Instruction Sheet Your choice of four kits to meet To provide true common point grounding for all workstation components, the kit 3047 offers a single-row, almost any grounding need six-terminal strip. No additional components offering In any area where static-sensitive electronic components resistance are in the path on any link of the static or boards are handled, proper static protection is protection system. Hard grounds are available on the six essential. A variety of static control devices is available terminals. The system is easily accessible, and mounts on to meet the requirements necessary to protect both the any flat surface in new or existing workstation electronics and the people handling them. But these environments. The protective cover is connected to devices require proper grounding to perform their ground via a one-megohm resistor for the maximum functions. These four kits cover a variety of possible in personnel safety. In addition, three cable clips are uses, from single-point grounding to multiple points included to aid you in ground cord management. connected to a common ground. 3048 Wrist Strap/Table Mat Grounding #6 Double System Studded Two wrist straps can be connected to the Wrist Strap/ Screw Table Mat Grounding System. The 15 foot (4.6 m) Terminal Strip ground cord is connected directly to hard ground. Snapping the Grounding System to either of the two connectors in the corners of the table mat provides Wear Layer reliable, common point grounding for the wrist straps and the table mat simultaneously. Laminate Black Conductive Layer Wrist Strap/Table Mat Grounding System Figure 3. Installing the 3047 Common Point Grounding System (top). Laminate Wear Layer 3050 Snap Fastener Black Hole “A” Conductive Layer Dissipative Table Mat Terminal Strip Hole “B” Figure 1. 3048 Wrist Strap/Table Mat Grounding System. #6 Double Studded Screw Cover 3047 Common Point Grounding System Figure 4. Installing the 3047 Common Point Grounding System (bottom). Figure 2. 3047 Common Point Grounding System. SCS - 926 JR Industrial Drive, Sanford, NC 27332 • (919) 718-0000 • Website: StaticControl.com TB-9039 Page 1 of 2 August 2016 © 2016 DESCO INDUSTRIES, INC. Employee Owned

3042 Wrist Strap Grounding System Figure 5. 3042 Wrist Strap Grounding System. Grounding of two wrist straps using a common point to Figure 8. Installation of the 3044 Laminate Grounding ground is possible with the system 3042. It is easy to System. identify for this purpose, with a clearly visible ground symbol. Compact in size, it mounts to any flat surface where a wrist strap needs to be connected to a reliable ground. The kit may be mounted on new workstations or A retrofitted onto any existing workstation. Components of the kit include one static dissipative engineering grade plastic housing, one 10-foot (3 m) grounding cord with B multi stud ring terminal, strain relief for the grounding C cord, two banana jacks built into the housing, and two #8 D galvanized, self-tapping Phillips screws. F E Solderless Table Top Ground Wire Cable Clip A. 8-32-1 Cap screw D. Ring Terminal #8 x 1 1/2" B. Brass insert 1/2" dia. E. 8-32 Nut C. 1/2" dia. flat washer F. Bench Mounted Ground with 2 Banana Jacks Ground Self-tapping Phillips Receptacle Head Screws Figure 9. Component Parts and Installation of the Flush Mount Inserts and the Flush Mount Laminate Ground Figure 6. Installing 3042 Wrist Strap Grounding System. Insert. 3044 Laminate Grounding System Important Notice Before using this product, you must evaluate it and To properly ground a workstation with Static Protective determine if it is suitable for your intended application. Hard Laminate, this kit gives you a choice of four methods You assume all risks and liability associated with such to provide proper grounding. This can be accomplished use. from the top or the bottom of the work surface. Contents of the kit include the hardware needed to establish reliable connections to ground. Limited Warranty, Warranty Exclusions, Limit of Liability and RMA Request Instructions See the SCS Warranty - http://staticcontrol.descoindustries.com/warranty.aspx Figure 7. 3044 Laminate Grounding System. SCS - 926 JR Industrial Drive, Sanford, NC 27332 • (919) 718-0000 • Website: StaticControl.com TB-9039 Page 2 of 2 © 2016 DESCO INDUSTRIES, INC. Employee Owned

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S CS: 3048 3042 3047