https://www.phoenixcontact.com/pi/products/3046140 Feed-through terminal block - UT 4-PE/MT P/P - 3046140 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, With test socket screws for insertion of test plugs, nom. voltage: 500 V, nominal current: 20 A, connection method: Screw connection, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, length: 70.8 mm, width: 6.2 mm, color: gray, mounting: NS 35/7,5, NS 35/15, nom. voltage: 500 V Key Commercial Data Packing unit 50 pc GTIN GTIN 4046356416221 Technical data General Number of levels 1 Number of connections 2 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.02 W Maximum load current 20 A (with 6 mm² conductor cross section) Nominal current I 20 A N Nominal voltage U 500 V N Open side panel No Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV 05/28/2019   Page 1 / 5

https://www.phoenixcontact.com/pi/products/3046140 Feed-through terminal block - UT 4-PE/MT P/P - 3046140 Technical data General Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x Test passed conductor connection) Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.2 mm² / 0.2 kg 4 mm² / 0.9 kg 6 mm2 / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.2 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1 N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 6,4 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Conductor cross section short circuit testing 6 mm² Short-time current 0.72 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 130 °C 0304-21)) Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed 05/28/2019   Page 2 / 5

https://www.phoenixcontact.com/pi/products/3046140 Feed-through terminal block - UT 4-PE/MT P/P - 3046140 Technical data General Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 6.2 mm Length 70.8 mm Height NS 35/7,5 49.1 mm Height NS 35/15 56.6 mm Connection data Note Please observe the current carrying capacity of the DIN rails. Connection method Screw connection Screw thread M3 Stripping length 9 mm Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Connection in acc. with standard IEC 60947-7-1/IEC 60947-7-2 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² Internal cylindrical gage A4 Standards and Regulations Connection in acc. with standard CUL IEC 60947-7-1/IEC 60947-7-2 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 05/28/2019   Page 3 / 5

https://www.phoenixcontact.com/pi/products/3046140 Feed-through terminal block - UT 4-PE/MT P/P - 3046140 Technical data Standards and Regulations Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details  CSA   http://www.csagroup.org/services-industries/product-listing/  13631   B C Nominal voltage UN 600 V 600 V Nominal current IN 16 A 16 A mm²/AWG/kcmil 26-10 26-10  UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 60425   D B C Nominal voltage UN 600 V 600 V Nominal current IN 16 A 16 A mm²/AWG/kcmil 26-10 26-10 26-10 05/28/2019   Page 4 / 5

https://www.phoenixcontact.com/pi/products/3046140 Feed-through terminal block - UT 4-PE/MT P/P - 3046140 Approvals  cUL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 60425   D B C Nominal voltage UN 600 V 600 V Nominal current IN 16 A 16 A mm²/AWG/kcmil 26-10 26-10 26-10   RU C- EAC    DE.A*30.B.01742  cULus Recognized      Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 05/28/2019   Page 5 / 5