2SC5001 NPN 10A 20V Middle Power Transistor Datasheet lOutline Parameter Value CPT3 Collector V 20V CEO r I 10A Base C o Emitter 2SC5001 f lFeatures (SC-63) 1) Suitable for Middle Power Driver <SOT-428> d 2) Complementary PNP Types : 2SA1834 3) Low V e CE(sat) V = 0.25V(Max.) CE(sat) d (I /I = 4A/ 0.05A) C B s 4) Large collector current : I = 10A (DC Max.) n C 5) Lead Free/RoHS Compliant. n e g m lInner circuit i Collector s m lApplications e Motor driver , LED driver Base o DPower supply , strobe c Emitter w e R lPackaging specifications e Package Basic N Taping Reel size Tape width Part No. Package size ordering Marking t code (mm) (mm) (mm) unit (pcs) o 2SC5001 CPT3 6595 TL 330 16 2,500 C5001 N www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 1/6 2013.07 - Rev.B

2SC5001 Data Sheet lAbsolute maximum ratings (Ta = 25°C) Parameter Symbol Values Unit Collector-base voltage V 30 V CBO Collector-emitter voltage V 20 V CEO Emitter-base voltage V 6 V EBO r DC I 10 A C Collector current o Pulsed I *1 15 A CP P *2 1 f W D Power dissipation P *3 10 W D d Junction temperature T 150 °C j Range of storage temperature T e-55 to +150 °C stg *1 Pw=10ms , single pulse d *2 Mounted on a substrate *3 Tc=25°C s n lElectrical characteristics (Ta = 25°C) n e Parameter Symbol Conditions Min. Typ. Max. Unit g m Collector-emitter BV I = 1mA 20 - - V breakdown voltage CEO C i s Collector-base m BV I = 50mA 30 - - V breakdown voltage CBO C e Emitter-base BV I = 50mA 6 - - V breakdown voltage oEBO E D Collector cut-off current c I V = 20V - - 1 mA CBO CB w e Emitter cut-off current I V = 5V - - 1 mA EBO EB Collector-emitter R V e I = 4A, I = 0.05A - 0.13 0.25 V saturation voltage CE(sat) C B Base-emitter N V I = 4A, I = 0.05A - 0.9 1.2 V saturation vtoltage BE(sat) C B o h 1 V = 2V, I = 0.5A 120 - 390 - FE CE C DC Ncurrent gain h 2 V = 2V, I = 4A 82 - - - FE CE C V = 5V, I = -1.5A Transition frequency f CE E - 150 - MHz T f=50MH Z V = 10V, I = 0A Output capacitance C CB E - 220 - pF ob f = 1MHz lh rank categories FE Rank Q R h 120 to 270 180 to 390 FE www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 2/6 2013.07 - Rev.B

2SC5001 Data Sheet lElectrical characteristic curves(Ta = 25°C) Fig.1 Ground Emitter Propagation Characteristics Fig.2 Typical Output Characteristics r T : I[A] C NT : I[A] C fo EN RE RR UR d U C R C OR e O T T C C E d E L L L L O O C n s C e n g m BASE TO EMITTER VOLTAGE : V [V] COLECTOR TO EMITTE VOLTAGE : V [V] BE CE i s m e o Fig.3 DC Current Gain vs. Collector Current(I) DFig.4 DC current gain vs. output current (II) c 1000 w e E E F F h R h N : e N : AI AI G N G NT 100 tTa=12255ººCC NT E E R o -40ºC R R R U U CN C C C D D V = 2V CE Pulsed 10 0.01 0.1 1 10 100 COLLECTOR CURRENT : I [A] COLLECTOR CURRENT : I [A] C C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 3/6 2013.07 - Rev.B

2SC5001 Data Sheet lElectrical characteristic curves(Ta = 25°C) Fig.5 Collector-Emitter Saturation Voltage Fig.6 Collector-Emitter Saturation Voltage vs. Collector Current (I) vs. Collector Current (II) 1 V] IC / IB = 80 mV] r [at) [at) o s s E( E( VC VC f R GE : Ta=125ºC R GE : EA 25ºC EA d TT 0.1 -40ºC TT TL TL MIO MIO e EV EV -N -N R R O O O O d TTI TTI CA CA ER ER s LU LU n LT LT OA OA CS CS n 0.01 e 0.01 0.1 1 10 100 g m COLLECTOR CURRENT : I [A] COLLECTOR CURRENT : I [A] C C i s m e o Fig.7 Base-Emitter Saturation Voltage DFig.8 Gain Bandwidth Product vs. Collector Current vs. Emitter Current c 10 V] IPCu /l IsBe =d 80 e w Hz] V [BE(sat) R e Y : f[MT E : Ta= -4250ººCC NC G E A 125ºC N U T 1 t Q L E R VO o FR EN N TO O MITTIN TI -ERA NSI EU A ST R AA T BS 0.1 0.001 0.01 0.1 1 10 100 COLLECTOR CURRENT : I [A] EMITTER CURRENT :I [A] C E www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 4/6 2013.07 - Rev.B

2SC5001 Data Sheet lElectrical characteristic curves(Ta = 25°C) Fig.9 Collector output capacitance vs. Fig.10 Safe Operating Area F] Collector-Base Voltage p b [ 100 o r C 1ms E : A] o C [C 10 10ms TAN T : I f CI N A E 1 P R d A R 100ms C U T C U R 0.1 eDC P O T T U C d O E R LL 0.01 TO CO Tna=25ºC s C Single non repetitive pulse E n L 0.0e01 L O 0.01 0.1 1 10 100 C g m COLLECTOR - BASE VOLTAGE : V [V] COLLECTOR TO EMITTER VOLTAGE : V [V] CB CE i s m e o D c w e R e N t o N www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 5/6 2013.07 - Rev.B

2SC5001 Data Sheet lDimensions (Unit : mm) A2 D B A b1 c1 CPT3 2 L 3 L r E H A1 o 4 b2 L f b3 L dL1 Lp c e e b x B A A3 d l3 s l2 l1n n e 5 b g m 6 b ie s m Pattern of terminal position areas [Not a recommended pattern of soeldering pads] o MILIMETERS D INCHES DIM MIN MAX MIN MAX A1 0c.00 0.15 0.000 0.006 A2 2.20 2.50 0.087 0.098 A3 0.25 w 0.010 e b 0.55 0.75 0.022 0.030 b1 5.00 5.30 0.197 0.209 b2R 5.00 0.197 b3 0e.75 0.030 c 0.40 0.60 0.016 0.024 c1 0.4N0 0.60 0.016 0.024 t D 6.30 6.70 0.248 0.264 E 5.40 5.80 0.213 0.228 o e 2.30 0.091 HE 9.00 10.00 0.354 0.394 N L 2.20 2.80 0.087 0.110 L1 0.80 1.40 0.031 0.055 L2 1.20 1.80 0.047 0.071 L3 5.30 0.209 L4 0.90 0.035 Lp 1.00 1.60 0.039 0.063 x - 0.25 - 0.010 MILIMETERS INCHES DIM MIN MAX MIN MAX b5 - 1.00 - 0.04 b6 - 5.20 - 0.205 ｌ1 - 2.50 - 0.098 ｌ2 - 5.50 - 0.217 ｌ3 - 10.00 - 0.394 Dimension in mm / inches www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 6/6 2013.07 - Rev.B

Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representativeand verify the latest specifica- r tions : o 3) Although ROHM is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take fsafety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the ratindg specified by ROHM. 4) Examples of application circuits, circuit constants and any other informatione contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. d 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or othern rights held by ROHM or asny other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. n e 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. m g 7) The Products specified in this document are not designed to be radiation tolerant. i 8) For use of our Products in applications requiring a high desgree of reliability (as exemplified below), please contact and consult m with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and poweer transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace o equipment, nuclear power control systems, and suDbmarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with c the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care tow ensur the accuracy of the information contained in this e document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. R e 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting N non-compliance with any applicable laws or regulations. t 13) When providing our Products and technologies contained in this document to other countries, o you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. N 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com R1102A © 2013 ROHM Co., Ltd. All rights reserved.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: R OHM Semiconductor: 2SC5001TLQ 2SC5001TLR