Thyristors Surface Mount – 200V-600W > 2N6071A/B Series 2N6071A/B Series Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative gate triggering. Features • Sensitive Gate Triggering Uniquely Compatible for Direct Coupling to TTL, HTL, CMOS and Operational Amplifier Integrated Circuit Logic Functions • Gate Triggering: 4 Mode - 2N6071A, B; 2N6073A, B; 2N6075A, B • Blocking Voltages to 600 V • All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability Pin Out • Small, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability • Device Marking: Device Type, e.g., 2N6071A, Date Code REAR VIEW SHOW TAB TO-225 Functional Diagram CASE 077 STYLE 5 2 1 Additional Information Datasheet Resources Samples © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/30/17

Thyristors Surface Mount – 200V-600W > 2N6071A/B Series Maximum Ratings and Thermal Characteristics (T = 25°C unless otherwise noted) J Rating Symbol Value Unit *Peak Repetitive Off-State Voltage (Note 1) (T = -40 to 110°C, Sine Wave, 50 to 60 Hz, Gate Open) V , J DRM 2N6071A,B V 200 RRM 2N6073A,B 400 2N6075A,B 600 *On-State RMS Current (T = 85°C) Full Cycle Sine Wave 50 to 60 Hz I 4.0 A C T(RMS) *Peak Non-repetitive Surge Current (One Full cycle, 60 Hz, T = +110°C) I 30 A J TSM Circuit Fusing Considerations (t = 8.3 ms) I 3.7 A2s 2t *Peak Gate Power (Pulse Width “1.0 µs, T = 85°C) P 10 W C GM *Average Gate Power (t = 8.3 ms, T = 85°C) P 0.5 W C G(AV) *Peak Gate Voltage (Pulse Width “1.0 µs, T = 85°C) V 5.0 V C GM *Operating Junction Temperature Range T -40 to +110 °C J *Storage Temperature Range T -40 to +150 °C stg Mounting Torque (6-32 Screw) (Note 2) _ 8.0 in. lb. Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. V and V for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. DRM RRM 2. Torque rating applies with use of a compression washer. Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Main terminal 2 and heatsink contact pad are common. Thermal Characteristics Rating Symbol Value Unit *Thermal Resistance, Junction to Case R 3.5 °C/W 8JC Thermal Resistance, Junction to Ambient (Note 1) R 75 °C/W 8JA Maximum Lead Temperature for Soldering Purposes, 1/8” from case for T 260 °C 10 seconds L *Indicates JEDEC Registered Data.. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/30/17

Thyristors Surface Mount – 200V-600W > 2N6071A/B Series Electrical Characteristics - OFF (T = 25°C unless otherwise noted; Electricals apply in both directions) C Characteristic Symbol Min Typ Max Unit *Peak Repetitive Blocking Current TJ = 25°C I , - - 10 µA (V = V = V ; Gate Open) DRM D DRM RRM I T = 110°C RRM - - 2 mA J Electrical Characteristics - ON (TC = 25°C unless otherwise noted; Electricals apply in both directions) Characteristic Symbol Min Typ Max Unit *Peak On-State Voltage (Note 3) (I = ±6.0 A Peak) C - - 2 V TM *Gate Trigger Voltage (Continuous DC), All Quadrants V - 1.4 2.5 V (Main Terminal Voltage = 12 Vdc, R = 100 Ω, T = -40 °C) GT L J Gate Non- Trigger Voltage, All Quadrants V .02 - - V (Main Terminal Voltage = 12 Vdc, R = 100 Ω, T = 110°C) GD L J *Holding Current T = -40°C - - 30 (Main Terminal Voltage = 12 Vdc, J I mA H Gate Open, Initiating Current = ±1 Adc) T = 25°C - - 15 J Turn-On Time (I = 14 Adc, I = 100 mAdc) t - 1.5 - µs TM GT gt QUADRANT (Maximum Value) I II III IV Type I @ T GT J mA mA mA mA 2N6071A +25°C 5 5 5 10 Gate Trigger Current (Continuous DC) 2N6073A (Main Terminal Voltage = 12 Vdc, RL = 100 Ω) 2N6075A -40°C 20 20 20 30 2N6071B +25°C 3 3 3 5 2N6073B 2N6075B -40°C 15 15 15 20 3. Pulse Test: Pulse Width ≤ 2.0 ms, Duty Cycle ≤ 2%. *Indicates JEDEC Registered Data. Dynamic Characteristics Characteristic Symbol Min Typ Max Unit Critical Rate of Rise of Commutation Voltage @ V , T = 85°C, Gate Open, I = 5.7 A, Exponential Waveform, - 5 10 V/µs DRM J TM dv/dt(c) Commutating di/dt = 2.0 A/ms © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/30/17

Thyristors Surface Mount – 200V-600W > 2N6071A/B Series SAMPLE APPLICATION: TTL-Sensitive Gate 4 Ampere Triac Triggers in Modes II and III 14 0 V MC7400 LOAD 4 2N6071A 510 -VEE VEE = 5.70 V 11650 VHAzC + Trigger devices are recommended for gating on Triacs. They provide: 1. Consistent predictable turn-on points. 2. Simplified circuitry. 3. Fast turn-on time for cooler, more efficient and reliable operation. Voltage Current Characteristic of Triacs (Bidirectional Device) Symbol Parameter V Peak Repetitive Forward Off State Voltage DRM I Peak Forward Blocking Current DRM I I V Peak Repetitive Reverse Off State Voltage RRM I Peak Reverse Blocking Current I I RRM V Maximum On State Voltage TM I Holding Current H © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/30/17

Thyristors Surface Mount – 200V-600W > 2N6071A/B Series Sensitive Gate Logic Reference Firing Quadrant IC Logic Functions I II III IV TTL _ 2N6071A Series 2N6071A Series _ HTL _ 2N6071A Series 2N6071A Series _ CMOS (NAND) 2N6071B Series _ _ 2N6071B Series CMOS (Buffer) _ 2N6071B Series 2N6071B Series _ Operational Amplifier 2N6071A Series _ _ 2N6071A Series Zero Voltage Switch _ 2N6071A Series 2N6071A Series _ Quadrant Definitions for a Triac Quadrant II Quadrant I I Quadrant III Quadrant IV © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/30/17

Thyristors Surface Mount – 200V-600W > 2N6071A/B Series Ratings and Characteristic Curves Figure 1. Average Current Derating Figure 2. RMS Current Derating Figure 3. Power Dissipation Figure 4. Power Dissipation Figure 5. Typical Gate-Trigger Voltage Figure 6. Typical Gate-Trigger Current © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/30/17

Thyristors Surface Mount – 200V-600W > 2N6071A/B Series Figure 7. Maximum On-State Characteristics Figure 8. Typical Holding Current Figure 9. Maximum Allowable Surge Current Figure 10. Thermal Response © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/30/17

Thyristors Surface Mount – 200V-600W > 2N6071A/B Series Dimensions Part Marking System -B- U F C REAR VIEW Q SHOW TAB M -A- TO-225 132 CASE 077 STYLE 5 H 2 1 K V J G R Ordering Information S 0.25 (0.010)BM A M M D2 PL 0.25 (0.010)BM A M M Device Package Shipping† 2N6071A TO-225 Inches Millimeters 500 Units / Box Dim TO-225 Min Max Min Max 2N6071AG (Pb-Free) A 0.425 0.435 10.80 11.04 2N6071AT TO-225 B 0.295 0.305 7.50 7.74 50 Units / Tube TO-225 2000 Units / Box C 0.095 0.105 2.42 2.66 2N6071ATG (Pb-Free) D 0.020 0.026 0.51 0.66 F 0.115 0.130 2.93 3.30 2N6071B TO-225 500 Units / Box G 0.094 BSC 2.39 BSC TO-225 2N6071BG H 0.050 0.095 1.27 2.41 (Pb-Free) J 0.015 0.025 0.39 0.63 2N6071BT TO-225 50 Units / Tube K 0.575 0.655 14.61 16.63 TO-225 2000 Units / Box M 5 TYP 5 TYP 2N6071BTG (Pb-Free) Q 0.148 0.158 3.76 4.01 2N6073A TO-225 R 0.045 0.065 1.15 1.65 S 0.025 0.035 0.64 0.88 TO-225 2N6073AG (Pb-Free) U 0.145 0.155 3.69 3.93 V 0.040 --- 1.02 --- 2N6073B TO-225 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. TO-225 2N6073BG 2. CONTROLLING DIMENSION: INCH. (Pb-Free) 500 Units / Box 3. 077-01 THRU -08 OBSOLETE, NEW STANDARD 077-09. 2N6075A TO-225 TO-225 2N6075AG (Pb-Free) Disclaimer Notice - Information furnished is believed to be accurate and 2N6075B TO-225 reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are TO-225 not designed for, and may not be used in, all applications. Read complete 2N6075BG (Pb-Free) Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/30/17