PLC-OS… PLC INTERFACE With Solid-State Relay, Universal Version INTERFACE Data Sheet 103148_en_02 © PHOENIX CONTACT - 03/2008 1 Description 1.2 Plug-In Bridges Save Wiring The PLC INTERFACE module achieves maximum PLC-OS… relay modules, which can be used universally, efficiency with the user-friendly FBST plug-in bridge system. comprise 6.2 mm basic terminal blocks and plug-in The PLC-OS… makes effective use of the bridging options miniature solid-state relays with screw or spring-cage for the A1/A2 connection on the control side and for the connection. power supply at connection 13 on the load side. Especially effective here are the 500mm long color-insulated 1.1 Input Voltages From 24 V to 230 V continuous plug-in bridges that can easily be cut to the The PLC-OS… is available on the control side in all common required length and quickly inserted in the bridge shafts. industrial voltages from 24 V to 230 V. A further advantage They eliminate the need for complicated and time- is the ready-integrated input circuit. It consists of a status consuming loop bridges. indicator and polarity reversal protection function, and ensures that the operating state is displayed clearly, also 1.3 Additional Advantages preventing destruction of the optical electronics should the – Switching power of up to 24 V DC/3 A, depending on polarity be accidentally reversed. the type – IP67-protected fully encapsulated optical electronics – Available with input or power solid-state relays as an option – Integrated input circuit – Solid-state relay can be replaced using an engagement lever – Wear-resistant switching – Resistant to vibrations and shocks – Inflammability class V0 according to UL94 Make sure you always use the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. This data sheet is valid for all products listed on the following page:

PLC-OS… 2 Ordering Data PLC INTERFACE With Screw Connection Description Type Order No. Pcs./Pck. PLC INTERFACE With Input Solid-State Relay, Universal Version PLC INTERFACE, comprising PLC-BSC... basic terminal block and plug-in miniature solid-state 24 V DC PLCOSC- 24DC/48DC/100 2966728 10 r3elay (.s Oeeth IeNr TinEpRuFt AvoCltEa gceasta olong r)e, qfoure msto.unting on 120 V AC/110 V DC PLCOSC-120UC/48DC/100 2966744 10 230 V AC/220 V DC1 PLCOSC-230UC/48DC/100 2966757 10 PLC INTERFACE With Power Solid-State Relay, Universal Version PLC INTERFACE, comprising PLC-BSC.../21 basic terminal block and plug-in miniature solid- 24 V DC PLCOSC- 24DC/24DC/2 2966634 10 smtaotuen rteinlagy o (ns e3e INT. EORthFeAr CinEp ucta vtaollotagg),e fso ro n 120 V AC/110 V DC PLCOSC-120UC/24DC/2 2966650 10 request. 230 V AC/220 V DC1 PLCOSC-230UC/24DC/2 2966663 10 1 The PLC-ATPBK insulating plate must be installed for voltages greater than 250 V (L1, L2, L3) between the same terminal points on adjacent modules (see "Accessories"). FBST 8-PLC... or FBST 500... is then used for potential bridging. PLC INTERFACE With Spring-Cage Connection Description Type Order No. Pcs./Pck. PLC INTERFACE With Input Solid-State Relay, Universal Version PLC INTERFACE, comprising PLC-BSC... basic terminal block and plug-in miniature solid-state 24 V DC PLCOSP- 24DC/48DC/100 2967549 10 r3elay (.s Oeeth IeNr TinEpRuFt AvoCltEa gceasta olong r)e, qfoure msto.unting on 120 V AC/110 V DC PLCOSP-120UC/48DC/100 2967552 10 230 V AC/220 V DC1 PLCOSP-230UC/48DC/100 2967565 10 PLC INTERFACE With Power Solid-State Relay, Universal Version PLC INTERFACE, comprising PLC-BSC.../21 basic terminal block and plug-in miniature solid- 24 V DC PLCOSP- 24DC/24DC/2 2967471 10 smtaotuen rteinlagy o (ns e3e INT. EORthFeAr CinEp ucta vtaollotagg),e fso ro n 120 V AC/110 V DC PLCOSP-120UC/24DC/2 2967484 10 request. 230 V AC/220 V DC1 PLCOSP-230UC/24DC/2 2967497 10 1 The PLC-ATPBK insulating plate must be installed for voltages greater than 250 V (L1, L2, L3) between the same terminal points on adjacent modules (see "Accessories"). FBST 8-PLC... or FBST 500... is then used for potential bridging. With the 120 V and 230 V modules, an OPT-60DC/... 60 V solid-state relay is normally used due to the input circuit integrated in the basic terminal block. For the protection of input and output, inductive loads must be dampened with an effective protective circuit. Accessories Description Type Order No. Pcs./Pck. Insulating plate PLC-ATPBK 2966841 25 The PLC-ATPBK insulating plate should be used in the following cases: always fit at the start and end of a PLC terminal strip for voltages greater than 250 V (L1, L2, L3) between the same terminal points on adjacent modules (FBST 8-PLC... or FBST 500... can be used for potential bridging) and for safe isolation between adjacent modules. For additional accessories such as power terminal blocks and plug-in bridges, please refer to the INTERFACE catalog or www.phoenixcontact.com. 103148_en_02 PHOENIX CONTACT 2

PLC-OS… 3 Technical Data Input Data PLCOS...48DC/100 PLCOS...24DC/2 Nominal input voltage1 24 V DC 120 V AC/110 V DC 24 V DC 120 V AC/110 V DC 230 V AC/220 V DC 230 V AC/220 V DC Permissible range (with reference to UN) 0.8 ... 1.2 x UN 0.8 ... 1.1 x UN 0.8 ... 1.2 x UN 0.8 ... 1.1 x UN Switching level 1 signal ("H") 0.8 x UN 0.8 x UN 0.8 x UN 0.8 x UN 0 signal ("L") 0.4 x UN 0.3 x UN 0.4 x UN 0.25 x UN Typical input current at UN 8 mA 4 mA 9 mA 4 mA Typical response time at UN 20 μs 6 ms 20 μs 6 ms Typical release time at UN 300 μs 10 ms 300 μs 10 ms Transmission frequency flimit 300 Hz 10 Hz 300 Hz 10 Hz Input circuit Yellow LED, Yellow LED, bridge Yellow LED, Yellow LED, bridge protection rectifier protection rectifier against polarity against polarity reversal, free- reversal, free- wheeling diode wheeling diode 1 The PLC-ATPBK insulating plate must be installed for voltages greater than 250 V (L1, L2, L3) between the same terminal points on adjacent modules (see "Accessories"). FBST 8-PLC... or FBST 500... is then used for potential bridging. Output Data PLCOS...48DC/100 PLCOS...24DC/2 Maximum switching voltage 48 V DC 33 V DC Minimum switching voltage 3 V DC Limiting continuous current 100 mA 3 A (see "Derating Curve") Maximum inrush current – 15 A (10 ms) Output configuration 2-wire floating Output circuit Protection against polarity reversal, surge protection Voltage drop at maximum limiting continuous current ≤ 1 V ≤ 200 mV General Data Impulse voltage withstand level 2.5 kV, 50 Hz, 1 min. Ambient temperature range Operation -25°C ... 60°C Storage/transport -40°C ... 85°C Nominal operating mode 100% operating factor Inflammability class according to UL 94 (housing) V0 Standards/specifications1 IEC 60664, IEC 60664 A, DIN VDE 0110 (basic insulation) Pollution degree 2 Surge voltage category III Mounting position Any Mounting Can be aligned without spacing Conductor cross-section Solid, with screw connection 0.14 mm2 ... 2.5 mm2 (26 - 14 AWG) Stranded, with screw connection 0.14 mm2 ... 1.5 mm2 (26 - 14 AWG) Solid, with spring-cage connection 0.2 mm2 ... 2.5 mm2 (24 - 14 AWG) Stranded, with spring-cage connection 0.2 mm2 ... 1.5 mm2 (24 - 14 AWG) Stripping length Screw connection 10 mm Spring-cage connection 8 mm Dimensions (W x H x D) 6.2 mm x 94 mm x 80 mm Housing material Polyamide PA, green 1 The PLC-ATPBK insulating plate must be installed for safe isolation between adjacent modules (see "Accessories"). FBST 8-PLC... or FBST 500... is then used for potential bridging. 103148_en_02 PHOENIX CONTACT 3

PLC-OS… Tests/Approvals CE c UL U u GL F 4 Block Diagram 5 Derating Curve A] nt [ e urr 3 c d a o L 2 A2 13+ A1 14 1 1) 0 1) The input circuit 0 10 20 30 40 50 60 depends on the type Ambient temperature [°C] 103148_en_02 PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany • Phone: +49 - 52 35 - 30 0 4 PHOENIX CONTACT • P.O.Box 4100 • Harrisburg • PA 17111-0100 • USA • Phone: +717-944-1300 www.phoenixcontact.com