https://www.phoenixcontact.com/us/products/2897211 Bus coupler - IL DN BK DI8 DO4-PAC - 2897211 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline, Bus coupler, DeviceNet™, TWIN COMBICON, Digital inputs: 8, 24 V DC, 3-conductor, Digital outputs: 4, 24 V DC, 500 mA, 3-conductor, Transmission speed in the local bus 500 kBit/s / 2 MBit/s, Degree of protection IP20, including Inline connectors and marking fields Product Description The bus coupler for the DeviceNet™ has 4 digital outputs and 8 digital inputs. This package contains all the necessary Inline connectors for connecting the supply and the I/Os. For project planning, the corresponding EDS (device master data) file for the product is provided in the download center. The Inline terminals can be labeled using pull-out labeling fields. The fields have insert cards that can be labeled individually to suit the application. Additionally, there is the ZBFM-6... Zack marker strip for labeling the terminal points. Product Features ■ DeviceNet™ connection using TWIN-COMBICON plug ■ 62 terminals can be connected ■ Automatic speed detection of the system bus ■ Address can be set via DIP switches or software ■ Slave function in DeviceNet™ network Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 352.4 g Custom tariff number 85176200 Country of origin Germany Technical data Note EMC: class A product, see manufacturer's declaration in the download Utilization restriction area Dimensions Width 80 mm Height 119.8 mm 04/27/2016   Page 1 / 8

https://www.phoenixcontact.com/us/products/2897211 Bus coupler - IL DN BK DI8 DO4-PAC - 2897211 Technical data Dimensions Depth 71.5 mm Note on dimensions Specfications with connectors Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Mounting type DIN rail Net weight 320 g Note on weight specifications with connectors Diagnostics messages Short-circuit / overload of the digital outputs Yes Sensor supply failure Yes Failure of the actuator supply Yes Interfaces Fieldbus system DeviceNet™ Designation DeviceNet™ Connection method TWIN COMBICON 500 kBit/s, 250 kBit/s, 125 kBit/s (Can be set via DIP switch or Transmission speed programmed) Number of positions 10 Fieldbus system Lokalbus Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s / 2 MBit/s (Automatic detection, no combined system) System limits of the bus coupler Number of supported devices max. 63 (per station) Number of local bus devices that can be connected max. 61 (on board I/Os are two devices) Number of devices with parameter channel max. 8 Number of supported branch terminals with remote bus branch 0 Power supply for module electronics Connection method Spring-cage connection 04/27/2016   Page 2 / 8

https://www.phoenixcontact.com/us/products/2897211 Bus coupler - IL DN BK DI8 DO4-PAC - 2897211 Technical data Power supply for module electronics Bus coupler supply U ; Communications power U (7.5 V) and the analog Designation BC L supply U (24 V) are generated from the bus coupler supply. ANA Supply voltage 24 V DC (via Inline connector) Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Supply current typ. 70 mA Current consumption max. 0.9 A (from U ) BK Power dissipation max. 3.5 W (entire device) Communications power U 7.5 V DC L Current consumption 0.8 A Power consumption typ. 1.7 W Inline potentials Communications power U 7.5 V DC ±5 % L Power supply at U max. 0.8 A DC L Main circuit supply U 24 V DC M Supply voltage range U 19.2 V DC ... 30 V DC (including all tolerances, including ripple) M Power supply at U max. 8 A DC (Sum of U + U ) M M S Current consumption from U max. 8 A DC M Segment circuit supply U 24 V DC S Supply voltage range U 19.2 V DC ... 30 V DC (including all tolerances, including ripple) S Power supply at U max. 8 A DC (Sum of U + U ) S M S Current consumption from U max. 8 A DC S I/O supply voltage U 24 V DC ANA Supply voltage range U 19.2 V DC ... 30 V DC (including all tolerances, including ripple) ANA Power supply at U max. 0.5 A DC ANA Digital inputs Input name Digital inputs Description of the input EN 61131-2 type 1 Connection method Inline connector 3-conductor Number of inputs 8 Typical response time approx. 500 µs Protective circuit Reverse polarity protection Suppressor diode Input voltage 24 V DC Input voltage range "0" signal -30 V DC ... 5 V DC Input voltage range "1" signal 15 V DC ... 30 V DC Nominal input current at U typ. 3 mA IN 04/27/2016   Page 3 / 8

https://www.phoenixcontact.com/us/products/2897211 Bus coupler - IL DN BK DI8 DO4-PAC - 2897211 Technical data Digital inputs Typical input current per channel typ. 3 mA Delay at signal change from 0 to 1 1.2 ms Delay at signal change from 1 to 0 1.2 ms Digital outputs Output name Digital outputs Connection method Inline connector 3-conductor Number of outputs 4 Protective circuit Short-circuit and overload protection Free running circuit Output voltage 24 V DC -1 V (At nominal current) Nominal output voltage 24 V DC Maximum output current per channel 500 mA Maximum output current per module / terminal block 2 A Maximum output current per module 2 A Nominal load, inductive 12 VA (1.2 H; 48 Ω) Nominal load, lamp 12 W Nominal load, ohmic 12 W Standards and Regulations Noise immunity test in accordance with EN 61000-6-2 Electrostatic Conformity with EMC directives discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, all interfaces 1 kVCriterion B, all interfaces 2 kV Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical), fieldbus cable shield 1 kV Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A; Test voltage 10 V Noise emission test as per EN 61000-6-4 EN 55011 Class A Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 Operation: 25g, 11 ms duration, semi-sinusoidal shock impulse Connection in acc. with standard CUL Protection class III, IEC 61140, EN 61140, VDE 0140-1 04/27/2016   Page 4 / 8

https://www.phoenixcontact.com/us/products/2897211 Bus coupler - IL DN BK DI8 DO4-PAC - 2897211 Classifications eCl@ss eCl@ss 4.0 27250203 eCl@ss 4.1 27250203 eCl@ss 5.0 27250203 eCl@ss 5.1 27242608 eCl@ss 6.0 27242608 eCl@ss 7.0 27242608 eCl@ss 8.0 27242604 eCl@ss 9.0 27242604 ETIM ETIM 2.0 EC001434 ETIM 3.0 EC001604 ETIM 4.0 EC001604 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details 04/27/2016   Page 5 / 8

https://www.phoenixcontact.com/us/products/2897211 Bus coupler - IL DN BK DI8 DO4-PAC - 2897211 Approvals UL Recognized  cUL Recognized  cULus Recognized  Accessories Accessories Connector set Connector set - IL BKDIO-PLSET - 2878599 Connector set, for Inline bus coupler with I/Os mounted in rows     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     Labeling panel 04/27/2016   Page 6 / 8

https://www.phoenixcontact.com/us/products/2897211 Bus coupler - IL DN BK DI8 DO4-PAC - 2897211 Accessories Labeling field - IB IL FIELD 8 - 2727515 Labeling field, width: 48.8 mm     Labeling field - IB IL FIELD 2 - 2727501 Labeling field, width: 12.2 mm     Plug Plug - TMSTBP 2,5/ 5-STF-5,08 GNAU CP - 2862576 TWIN-COMBICON plug for CANopen® and DeviceNet™ connection     Terminal marking Insert strip - ESL 62X46 - 0809502 Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems, Plotter: Laser printer, Mounting type: Insert, Lettering field: 62 x 46 mm     Insert strip - ESL 62X10 - 0809492 Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems, Plotter: Laser printer, Mounting type: Insert, Lettering field: 62 x 10 mm     04/27/2016   Page 7 / 8

https://www.phoenixcontact.com/us/products/2897211 Bus coupler - IL DN BK DI8 DO4-PAC - 2897211 Accessories Drawings Connection diagram Dimensional drawing PWRDO4DI4DI4 1 2 3 4 119,8 IN6 US+- +24 V +24 V DeviceNetTM IN8 U + BK- 5 - +UT3 UT2 71, U O O M Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/27/2016   Page 8 / 8

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: P hoenix Contact: 2897211