8 7 6 5 4 3 2 1 NOTES 3MTM FOUR-WALL HEADER, 2500 SERIES * LOW PROFILE, SPACE SAVING DESIGN. 1. REGULATORY INFORMATION: * CENTER SLOT POLARIZATION PREVENTS MIS-INSERTIONS AND REDUCES ROHS COMPLIANT. SEE THE INSERTION TIME. REGULATORY INFORMATION .100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE * DUAL SLOT POLARIZATION MEANS BROADER COMPATIBILITY WITH COMPETITIVE APPENDIX (RIA) IN THE POLARIZATION DESIGNS (NOT AVAILABLE ON 6, 8 OR 10 POSITIONS). "ROHS COMPLIANCE" SECTION * OPTIONAL RETAINER CLIP FOR LOCKING SOCKETS IN PLACE AND INCREASING OF WWW.3MCONNECTORS.COM FOR CONNECTION RELIABILITY IN VIBRATION-PRONE ENVIRONMENTS. COMPLIANCE INFORMATION. * HIGH TEMPERATURE INSULATOR SUITABLE FOR "NO LEAD" SOLDERING OPERATIONS. 2 IN THE EVENT OF CONFLICT * THROUGH HOLE VERSION SUITABLE FOR REFLOW SOLDERING USING "PASTE IN HOLE" BETWEEN THIS DATA AND THAT TECHNIQUES. CONTAINED IN THE PRODUCT D * EXPOSED SOLDER TAILS (ON RIGHT ANGLE VERSION) PROVIDE EASE OF CLEANING D SPECIFICATION, THE PRODUCT AND REDUCED REPAIR COST. SPECIFICATION TAKES PRECEDENT. * STRAIGHT SURFACE MOUNT VERSION AVAILABLE. 3 NOTCHES A & C WILL ACCOMODATE 3M POLARIZING KEY: N3518. 4 CONTACT TAILS .0245 [.622] WIRE WITH .0075 [.191] CORNER RADII AND .028 [.072] DIAGONAL. 5 SOLDER STANDOFFS FACILITATE .01 [.3] CLEARANCE ABOVE BOARD FOR REFLOW SOLDERING. PHYSICAL: 2 INSULATOR: MATERIAL: GLASS FILLED POLYESTER (PCT) FLAMMABILITY: UL94V-0 25XX-60XX COLOR: BLACK CONTACT: MATERIAL: COPPER ALLOY STRAIGHT VERSION PLATING: UNDER PLATING: 100 " [2.54 m] NICKEL-OVERALL C C WIPING AREA: AVG. GOLD (SEE ORDERING INFORMATION) SOLDER TAILS: 200 " [5.08 m] TIN LEAD OR MATTE TIN (SEE ORDERING INFORMATION) MARKINGS: 3M LOGO, PART IDENTIFICATION NUMBER AND ORIENTATION TRIANGLE ELECTRICAL: 2 CURRENT RATING: 5.00A, 1 CONTACT POWERED 3.00A, 6 CONTACTS POWERED 1.75A, ALL CONTACTS POWERED RATING CONDITIONS: EIA-364-070 METHOD 2, 30 C MAXIMUM TEMPERATURE RISE, 20% DERATED. REFERENCE APPROPRIATE N O NSI 3M PRODUCT SPECIFICATION FOR DETAILED CURRENT DERATING VI E R CURVES. 7 INSULATION RESISTANCE: >1 X 109 AT 500 V - DC 0 WITHSTANDING VOLTAGE: 1,000V AT SEA LEVEL 7 RMS 7 0 - 0R 25XX-50XX ENVIRONMENTAL: 0BE 2 1UM 5G N -N RIGHT ANGLE VERSION TEMPERATURE RATING: -55 C TO 105 C 8AWI 7R PROCESS RATING: 260 C, PER J-STD-020C, SINGLE PASS D MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020C) B B 25XX-6V0C 0 N 68908 AUG 02,2016 JNC SC 0 : REVISE DIM ON SHT2 & 5 SURFACE MOUNT VERSION 0 CLIP CHART ON SHT5 - DIMENSIONS: INCHES [MM] C [MM] IS REF. ONLY M 56068 AUG 11,2014 JNC RS T U REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD A ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 11,2014 MFG DATE 0 1 A CHKD DATE APPVL DATE A R. SCHERER SEP 05,2014 1: DIVISION DIVISION CODE C 3M COPYRIGHT 2016 1 Interconnect Solutions EMSD 3M Center This document and the information it contains are 6 DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 0 NOTED All rights reserved. DRAWING 1 2 INCHES TITLE / 3M ELECTRONIC MATERIALS SOLUTIONS DIVISION 5 HEADER, 4-WALL, .0 / INTERCONNECT SOLUTIONS .00 .01 8 LO-PRO, .100 X .100, http://www.3mconnectors.com .000 .005 1 R THIRD ANGLE PROJECTION .0000 N. SMT, STRAIGHT & RA INTERPRET PER MILLIMETERS : 3M IS A TRADEMARK OF 3M COMPANY. ASME Y14.5 - 2009 0 d FOR TECHNICAL, SALES OR ORDERING MAX SURFACE ROUGHNESS .0 .3 CAGE SIZE DRAWING NO. REV. ge .00 .13 NUMBER 78-5100-0770-7 N a INFORMATION CALL 800-225-5373 UL FILE NO: E68080 ALL SURFACES .000 m MARKED ONLY ANGLES MODEL2500 SERIES DLIESTT.S YES NO SHT 1 OF 5 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM FOUR-WALL HEADER, 2500 SERIES .100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE DIM. "B" NOTCH D NOTCH E D D .228 .0245 .0005 .250 .338 5.79 0.622 0.013 6.35 8.59 SQ. TYP. .100 2.54 .253 .243 NOTCH "B" 6.43 6.17 .194 4.93 .100 (SEE TABLE 1) 2.54 NOTCH "A" SOLDER TAIL A-A (SEE TABLE 1 & NOTE 3) SECTION .112 .011 [2.84] FOR 02 VERSION .155 .011 [3.94] FOR 03 VERSION .165 POSITION 1 4.19 NOTCH "C" ORIENTATION C A (SEE TABLE 1 & NOTE 3) C TRIANGLE .298 .390 7.57 TABLE 1 9.91 PIN POLARIZING PIN DIM. "A" DIM. "B" QTY. NOTCHES QTY. 06 .588 [14.94] .508 [12.90] B 06 08 .688 [17.48] .608 [15.44] B 08 N 10 .788 [20.02] .708 [17.98] BC 10 A NSIO VI E 14 .988 [25.10] .908 [23.06] BCDE 14 R 16 1.088 [27.64] 1.008 [25.60] ABCDE 16 7 - 0 DIM. "A" 20 1.288 [32.72] 1.208 [30.68] ABCDE 20 7 7 24 1.488 [37.80] 1.408 [35.76] ABCDE 24 0 - 0R 26 1.588 [40.34] 1.508 [38.30] ABCDE 26 0BE M 1U 30 1.788 [45.42] 1.708 [43.38] ABCDE 30 5G N -N 8WI 34 1.988 [50.50] 1.908 [48.46] ABCDE 34 7RA D .400 10.16 36 2.088 [53.04] 2.008 [51.00] ABCDE 36 MIN. END 40 2.288 [58.12] 2.208 [56.08] ABCDE 40 B STACKABILITY .035 .003 B 50 2.788 [70.82] 2.708 [68.78] ABCDE 50 .250 6.35 0.89 0.08 60 3.288 [83.52] 3.208 [81.48] ABCDE 60 MIN. SIDE .172 .003 AFTER PLATING 64 3.488 [88.60] 3.408 [86.56] ABCDE 64 STACKABILITY TYP. 4.37 0.08 .100 .003 2.54 0.08 .100 .003 .035 .003 POSITION #1 2.54 0.08 0.89 0.08 .050 .003 OPTIONAL HOLE FOR 0 ORDERING INFORMATION 1.27 0.08 N 68908 AUG 02,2016 JNC SC POLARIZATION PEG 0 : REVISE DIM ON SHT2 & 5 STRAIGHT VERSION 0 CLIP CHART ON SHT5 - RECOMMENDED HOLE PATTERN C M 56068 AUG 11,2014 JNC RS T U X25XX-60XX-XX SHOWN FROM COMPONENT SIDE REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD A ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 11,2014 MFG DATE 0 N= HIGH TEMP BLACK (PCT) PLATING: 1 A CHKD DATE APPVL DATE A (RB, UB OR UG PLATING REQ'D) RB = 30 " [0.76 m] AVG. GOLD DIVISION DIVISION CODE C 3RM .C SOCPHYERRIEGRHT 2016 SEP 05,2014 11: BLANK= (UB OR UG PLATING) 200 " [5.08 m] MATTE TIN (RIA. E1 & C1 APPLY) Interconnect Solutions EMSD 3M Center This document and the information it contains are 6 DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 UG = 15 " [0.38 m] AVG. GOLD SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 0 NOTED All rights reserved. PIN QUANTITY: 200 " [5.08 m] 60:40 TIN-LEAD SOLDER TAILS DRAWING 1 2 INCHES TITLE / (SEE TABLE 1) (RIA E3 & C2 APPLY) .0 HEADER, 4-WALL, /5 UB = 30 " [0.76 m] AVG. GOLD .00 .01 8 LO-PRO, .100 X .100, .000 .005 1 SOLDER TAIL: 200 " [5.08 m] 60:40 TIN LEAD SOLDER TAILS THIRD ANGLE PROJECTION .0000 . N 02 = FOR .062 [1.57] THICK BOARD (RIA E3 & C2 APPLY) SMT, STRAIGHT & RA INTERPRET PER MILLIMETERS : 03 = FOR .094 TO .125 [2.39 TO 3.18] ASME Y14.5 - 2009 0 d .0 .3 e THICK BOARD MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-0770-7 N a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL2500 SERIES DLIESTT.S YES NO SHT 2 OF 5 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM FOUR-WALL HEADER, 2500 SERIES .100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE DIM. "B" NOTCH D NOTCH E .0245 .0005 0.622 0.013 SQ. TYP. D D .228 .250 .338 5.79 .253 .243 6.35 8.59 .390 6.43 6.17 9.91 .100 2.54 NOTCH "B" (SEE TABLE 1) .100 .100 2.54 .194 4.93 2.54 SOLDER TAIL .112 .011 [2.84] FOR 02 VERSION .155 .011 [3.94] FOR 03 VERSION NOTCH "A" (SEE TABLE 1 & NOTE 3) B-B SECTION .165 4.19 POSITION 1 NOTCH "C" ORIENTATION C B (SEE TABLE 1 & NOTE 3) C TRIANGLE .298 .390 7.57 TABLE 1 9.91 PIN POLARIZING PIN DIM. "A" DIM. "B" QTY. NOTCHES QTY. 06 .588 [14.94] .508 [12.90] B 06 08 .688 [17.48] .608 [15.44] B 08 N 10 .788 [20.02] .708 [17.98] BC 10 NSIO VI B E 14 .988 [25.10] .908 [23.06] BCDE 14 R 16 1.088 [27.64] 1.008 [25.60] ABCDE 16 7 - 0 20 1.288 [32.72] 1.208 [30.68] ABCDE 20 DIM. "A" 7 7 24 1.488 [37.80] 1.408 [35.76] ABCDE 24 0 - 0R 26 1.588 [40.34] 1.508 [38.30] ABCDE 26 0BE M 1U 30 1.788 [45.42] 1.708 [43.38] ABCDE 30 5G N .41 10.4 -N 8WI 34 1.988 [50.50] 1.908 [48.46] ABCDE 34 7RA D MAX. DIM. TO 36 2.088 [53.04] 2.008 [51.00] ABCDE 36 EDGE OF PCB 40 2.288 [58.12] 2.208 [56.08] ABCDE 40 FOR BUSSING B B 50 2.788 [70.82] 2.708 [68.78] ABCDE 50 60 3.288 [83.52] 3.208 [81.48] ABCDE 60 64 3.488 [88.60] 3.408 [86.56] ABCDE 64 .100 .003 .400 10.16 2.54 0.08 MIN. END STACKABILITY .035 .003 0.89 0.08 .100 .003 POSITION #1 AFTER PLATING ORDERING INFORMATION 2.54 0.08 TYP. N 68908 AUG 02,2016 JNC SC 0 0 : REVISE DIM ON SHT2 & 5 RIGHT ANGLE VERSION 0 CLIP CHART ON SHT5 - C RECOMMENDED HOLE PATTERN M 56068 AUG 11,2014 JNC RS T U X25XX-50XX-XX REVISED AND REDRAWN SHOWN FROM COMPONENT SIDE M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD A ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 11,2014 MFG DATE 0 N= HIGH TEMP BLACK (PCT) PLATING: 1 A CHKD DATE APPVL DATE A (RB, UB OR UG PLATING REQ'D) RB = 30 " [0.76 m] AVG. GOLD DIVISION DIVISION CODE C 3RM .C SOCPHYERRIEGRHT 2016 SEP 05,2014 11: BLANK= (UB OR UG PLATING) 200 " [5.08 m] MATTE TIN (RIA. E1 & C1 APPLY) Interconnect Solutions EMSD 3M Center This document and the information it contains are 6 DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 UG = 15 " [0.38 m] AVG. GOLD SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 0 NOTED All rights reserved. PIN QUANTITY: 200 " [5.08 m] 60:40 TIN-LEAD SOLDER TAILS DRAWING 1 2 INCHES TITLE / (SEE TABLE 1) (RIA E3 & C2 APPLY) .0 HEADER, 4-WALL, /5 UB = 30 " [0.76 m] AVG. GOLD .00 .01 8 LO-PRO, .100 X .100, .000 .005 1 SOLDER TAIL: 200 " [5.08 m] 60:40 TIN LEAD SOLDER TAILS THIRD ANGLE PROJECTION .0000 . N 02 = FOR .062 [1.57] THICK BOARD (RIA E3 & C2 APPLY) SMT, STRAIGHT & RA INTERPRET PER MILLIMETERS : 03 = FOR .094 TO .125 [2.39 TO 3.18] ASME Y14.5 - 2009 0 d .0 .3 e THICK BOARD MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-0770-7 N a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL2500 SERIES DLIESTT.S YES NO SHT 3 OF 5 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM FOUR-WALL HEADER, 2500 SERIES .100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE DIM. "B" NOTCH D NOTCH E VACUUM CAP REMOVED FOR CLARITY D .0245 .0005 D .228 .253 0.622 0.013 .250 .338 5.79 6.43 SQ. TYP. 6.35 8.59 .243 .100 2.54 .400 .010 6.17 VACUUM CAP 10.16 0.25 .359 [9.12] SQ. .194 4.93 CENTERED ON CONN. POSITION 1 .004 FOR LESS THAN 30 POS. .100 2.54 .170 4.32 .006 FOR 30 AND ABOVE POS. NOTCH "A" (SEE TABLE 1 & NOTE 3) .440 .010 NOTCH "B" .165 11.18 0.25 (SEE TABLE 1) 4.19 NOTCH "C" C-C (SEE TABLE 1 & NOTE 3) SECTION POSITION 1 ORIENTATION C C .035 0.89 C TRIANGLE .298 .390 7.57 TABLE 1 9.91 TAPE AND PIN POLARIZING PIN DIM. "A" DIM. "B" REEL PKG QTY. NOTCHES QTY. CODE 06 .588 [14.94] .508 [12.90] B WD (44 MM) 06 08 .688 [17.48] .608 [15.44] B WD (44 MM) 08 C ON NSI VI 10 .788 [20.02] .708 [17.98] BC WD (44 MM) 10 E R 14 .988 [25.10] .908 [23.06] BCDE WD (44 MM) 14 7 DIM. "A" - 16 1.088 [27.64] 1.008 [25.60] ABCDE WD (44 MM) 16 0 7 7 20 1.288 [32.72] 1.208 [30.68] ABCDE WE (56 MM) 20 0 - 24 1.488 [37.80] 1.408 [35.76] ABCDE WE (56 MM) 24 0R 0BE M 1U 26 1.588 [40.34] 1.508 [38.30] ABCDE WE (56 MM) 26 5G N -N 30 1.788 [45.42] 1.708 [43.38] ABCDE WF (72 MM) 30 8AWI 7R D 34 1.988 [50.50] 1.908 [48.46] ABCDE WF (72 MM) 34 .050 36 2.088 [53.04] 2.008 [51.00] ABCDE WG (88 MM) 36 B B 40 2.288 [58.12] 2.208 [56.08] ABCDE WG (88 MM) 40 1.27 50 2.788 [70.82] 2.708 [68.78] ABCDE WG (88 MM) 50 .200 60 3.288 [83.52] 3.208 [81.48] ABCDE WH (120 MM) 60 64 3.488 [88.60] 3.408 [86.56] ABCDE WH (120 MM) 64 5.08 .470 .270 11.94 6.86 .070 1.78 .100 2.54 0 ORDERING INFORMATION N 68908 AUG 02,2016 JNC SC 0 TYP. REVISE DIM ON SHT2 & 5: SURFACE MOUNT VERSION 0 CLIP CHART ON SHT5 - C M 56068 AUG 11,2014 JNC RS T RECOMMENDED PAD LAYOUT N25XX-6V0C-XX-XX U REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD A ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 11,2014 MFG DATE 0 N = HIGH TEMP BLACK (PCT) PACKAGING OPTIONS: 1 A CHKD DATE APPVL DATE A (RB PLATING REQ'D) WX = TAPE & REEL PACKAGING (SEE TABLE 1) R. SCHERER SEP 05,2014 1: DIVISION DIVISION CODE C 3M COPYRIGHT 2016 1 Interconnect Solutions EMSD 3M Center This document and the information it contains are 6 PIN QUANTITY: PLATING: DSOC NALOET SC4ALE TEOXLCEERPATN CAESS SMNt . 5P5a1u4l4, 3ddMiiss pctrlroiobspueetder todyt ahwneitdrh mtohauaytn 3n Mfoo tp rbe 3erMm r eaispusrtoihodonur,ci zeoedrd uo psreu fdrup orotsrh eesr. 01 (SEE TABLE 1) RB = 30 " [0.76 m] AVG. GOLD DRAWING 1 NOTED All rights reserved. 2 INCHES TITLE / 200 " [5.08 m] MATTE TIN (RIA. E1 & C1 APPLY) HEADER, 4-WALL, 5 .0 / 8 .00 .01 LO-PRO, .100 X .100, .000 .005 1 THIRD ANGLE PROJECTION .0000 . N SMT, STRAIGHT & RA INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-0770-7 N a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL2500 SERIES DLIESTT.S YES NO SHT 4 OF 5 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM FOUR-WALL HEADER, 2500 SERIES .100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE PART CUSTOMIZATION THIS SPEC SHEET DETAILS OUR STANDARD OFFERING. D LOW PROFILE LATCH POLARIZING POST D 3M HAS SEVERAL CAPABILITIES THAT CAN PROVIDE A PART TAILORED TO YOUR SPECIFIC NEEDS. ASK YOUR 3M SALES REPRESENTATIVE OR CUSTOMER SERVICE FOR MORE DETAILS. .144 .204 .118 * SELECTIVE PIN REMOVAL (FOR BOARD ASSEMBLY POLARIZATION). 3.66 5.18 3.00 * DIFFERENT PIN LENGTHS. POLARIZING KEY BREAKAWAY TAB .267 .830 .043 .370 6.78 .573 21.08 1.09 9.40 14.55 .09 2.3 .102 .34 C 2.59 C .082 .030 .057 .118 8.5 2.08 0.76 1.45 3.00 .15 DIM. "A" PART NO. MATERIAL COLOR PART NO. MATERIAL COLOR 3505-33B NYLON BLACK 3201-3 PCT BLACK 3.8 NOTE: 3M PART NO. MATERIAL COLOR DIM. "A" LATCHES NOT COMPATIBLE WITH REFLOW SOLDERING. N3518 LCP BLACK .02 ATTACH LATCHES AFTER SOLDERING. N O NSI VI E R NOTE: #2216 B/A SCOTCHWELD CAN BE USED TO 7 - ADHERE KEYS. 0 7 7 0 - 0R 0BE M 1U SHORT/LONG SOCKET RETAINER CLIP 5G N -N 8WI A 7R D PIN QTY. DIM. "A" B B DIM. "A" 06 N/A .11 08 N/A 2.8 10 .81 [20.6] 14 1.02 [25.9] MAX. UNCOATED AREA (ON BOTH EDGES) 16 1.12 [28.4] 20 1.32 [33.5] 24 1.52 [38.7] 26 1.63 [41.4] 30 1.83 [46.4] 34 2.03 [51.6] .2 .1 CLIP HEIGHT 36 N/A 5.1 3 CODE 40 2.33 [59.2] 50 2.83 [71.9] ALTERNATE 60 3.33 [84.6] UNCOATED AREA 64 3.53 [89.7] N 68908 AUG 02,2016 JNC SC 0 0 : REVISE DIM ON SHT2 & 5 0 CLIP CHART ON SHT5 - C NOTE: M 56068 AUG 11,2014 JNC RS T U STAINLESS STEEL WITH GRAY POLYURETHANE COATING. 3505-8XXX REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD A CLIP HEIGHT CODE PIN COUNT ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 11,2014 MFG DATE 10 A CHKD DATE APPVL DATE A 0 = .31 [7.9] FOR SOCKETS (SEE TABLE) R. SCHERER SEP 05,2014 1: WITHOUT STRAIN RELIEF DIVISION DIVISION CODE C 3M COPYRIGHT 2016 1 Interconnect Solutions EMSD 3M Center This document and the information it contains are 6 1 = .53 [13.5] FOR SOCKETS DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 WITH STRAIN RELIEF SCALE 4 EXCNOEPTETD AS MN 55144 dAisllc rloigshedts o rtehseer rtvheadn. for 3M authorized purposes. 0 DRAWING 1 2 INCHES TITLE / 5 HEADER, 4-WALL, NOTE: .0 / 8 .00 .01 1) THE FOLLOWING RETAINER CLIPS HAVE BEEN DISCONTINUED: LO-PRO, .100 X .100, .000 .005 1 3505-8064 THIRD ANGLE PROJECTION .0000 N. SMT, STRAIGHT & RA 3505-8124 INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d 3505-8150 .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-0770-7 N a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL2500 SERIES DLIESTT.S YES NO SHT 5 OF 5 I 8 7 6 5 4 3 2 1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3 M: 2534-6003UB 2520-5003UG 2526-5003UB 2540-60K2UG 2560-5003UB 2564-6003UB N2520-6003UB N2516- 5002UB N2516-60K2UB N2520-6002UG N2520-60K2UG N2526-7002UG N2530-6002UB N2534-5002UB N2534- 6003UB N2540-6002UB N2550-5002UB N2550-6002UG N2550-6003UB N2510-50K2RB N2510-5002UB N2510- 5003RB N2510-60K2RB N2510-6002UB N2510-6002UG N2510-6003RB N2510-7003UG N2514-5002UB N2514- 5003RB N2514-6003RB N2516-50K2RB N2516-5003RB N2516-6003RB N2520-50K2RB N2520-5003RB N2520- 6003RB N2524-6002UB N2524-6003RB N2526-50K2RB N2526-6002UB N2530-5003RB N2530-60K2RB N2530- 6003RB N2530-6003UB N2534-5003RB N2534-6002UB N2534-6003RB N2540-5002UB N2540-5003RB N2540- 60K2RB N2540-6003RB N2540-7002UG N2550-60K2RB N2550-6002UB N2550-6003RB N2564-60K2RB 2540- 60K2UB N2530-50K2RB 2540-6002UG N2550-5002RB N2540-5002RB 2560-6003UB N2560-6003RB 2526- 6003RB 2516-6005EB N2520-5003UB N2530-6002RB N2526-5002RB 2524-6002UB N2526-6V0C-RB-WF N2516- 6002RB N2510-6002RB N2514-6002RB N2540-6002RB N2534-6002RB N2534-5002RB N2530-5002RB N2520- 5002RB N2524-5002RB N2550-6002RB N2524-6002RB N2520-6002RB N2526-6002RB N2510-5002RB N2514- 5002RB N2516-5002RB N2560-5002RB N2564-5002RB N2564-6002RB N2560-6002RB 2510-6003UG N2526- 7002UB 2560-5002UB 2530-5002UB 2526-5002UB 2520-6002UG 2526-6002UG 2534-6002UG 2514-6002UG 2524-5002UB