2200R Series www.murata-ps.com Radial Lead Inductors SELECTION GUIDE Inductance, DC Current1 DC Resistance Q at f kHz SRF Order Code (1kHz, 0.1VAC) ±10% Max. Max. Nom. Nom. μH A Ω Q f MHz 22R103C 10.0 1.62 0.05 65 1000 21.2 22R153C 15.0 1.35 0.07 60 500 19.4 22R223C 22.0 1.08 0.09 50 500 17.0 FFEEAATTUURREESS 22R333C 33.0 0.90 0.14 50 500 11.4 22R473C 47.0 0.77 0.22 50 500 10.9 (cid:132)RoHS compliant 22R683C 68.0 0.77 0.28 90 100 8.7 (cid:132)Radial format 22R104C 100.0 0.67 0.39 90 100 7.0 (cid:132)Up to 1.62A IDC 22R154C 150.0 0.52 0.54 90 100 5.7 22R224C 220.0 0.43 0.83 100 100 4.4 (cid:132)10μH to 68mH 22R334C 330.0 0.38 1.21 100 100 3.7 (cid:132)Low DC resistance 22R474C 470.0 0.31 1.65 110 100 3.2 22R684C 680.0 0.25 2.64 120 100 2.5 (cid:132)Miniature size 22R105C 1.0mH 0.17 3.63 120 100 2.1 (cid:132)PCB mounting 22R155C 1.5mH 0.13 6.49 130 100 1.9 22R225C 2.2mH 0.11 8.58 90 50 1.7 (cid:132)MIL-I-23053/5 class I sleeving 22R335C 3.3mH 0.10 11.0 140 150 1.2 (cid:132)Fully tinned leads 22R475C 4.7mH 0.081 15.0 150 150 0.95 (cid:132)Supplied in bags of 100 22R685C 6.8mH 0.072 22.0 145 150 0.85 22R106C 10.0mH 0.063 37.4 155 150 0.62 (cid:132)Compatible with RoHS soldering systems 22R156C 15.0mH 0.054 51.7 140 150 0.51 (cid:132)Backward compatible with 22R226C 22.0mH 0.045 82.5 100 50 0.34 Sn/Pb soldering systems 22R336C 33.0mH 0.036 118.8 95 50 0.28 22R476C 47.0mH 0.027 169.4 90 50 0.25 (cid:132)Custom parts available 22R686C 68.0mH 0.018 242.0 70 50 0.20 TYPICAL CORE/WIRE CHARACTERISTICS DESCRIPTION Inductance Temperature Resistance Temperature Curie Temperature Saturation Flux The 2200R Series is a general purpose range Coefficient Coefficient (T) (B ) of inductors suitable for low to medium current C SAT 350ppm 3900ppm 190°C 325mT applications. Their small footprint makes them ideal for high density applications where a chip ABSOLUTE MAXIMUM RATINGS inductor will not cope with the power requirement. Operating free air temperature range -25°C to 70°C Storage temperature range -40°C to 125°C SOLDERING INFORMATION2 Peak wave solder temperature 300˚C for 10 seconds Pin finish Hot dipped tin All specifications typical at T=25°C A 1 Maximum DC current occurs when either the inductance falls to 90% of its nominal value or when its temperature rise reaches 30°C, whichever is sooner. 2 For further information, please visit www.murata-ps.com/rohs (cid:3) (cid:3) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KMP_2200RC_C03 Page 1 of 2

2200R Series Radial Lead Inductors PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT DETAILS 0.256±0.20 103C All dimensions in inches (mm) All dimensions in inches (mm). Package weight 1.3g Typ. Murata Power Solutions, Inc. Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without ISO 9001 and 14001 REGISTERED notice. © 2017 Murata Power Solutions, Inc. www.murata-ps.com/support KMP_2200RC_C03 Page 2 of 2