Made in the United States of America The Adjustable Wrist Strap set provides a cost-effective method of grounding personnel. Features a comfortable, adjustable band, a 5 ft. (1.5 m) coil cord with a 4mm snap. One size adjusts to most any size wrist to provide reliable, 360-degree protection. A 1 megohm resistor is built into the ground cord. Adjust band over a range of diameters, 1.7 in. – 3.5 in. Meets ANSI/ESD S20.20 and ANSI/ESD S1.1. Wristband Properties Typical Value Test Method Fabric Elastic nylon Resistance < 500 ohms ANSI/ESD S1.1 Contact 360 Degrees Around Wrist Color Royal blue with white edgest Male Stud Snap 4mm Snap Release < 3 lbs. Back Plate Stainless Steel Coil Cord Properties Typical Value Test Method Length 5 Feet Note: This product is not recommended for use on equipment with operating voltage Resistance 1 Megohm ANSI/ESD S1.1 exceeding 250 VAC. Flex life average 1,000,000 cycles ANSI/ESD S1.1 CAUTION: The ESD Series is for electrostatic control. It will not reduce or increase your risk of receiving electric shock when using or working on electrical equipment. Color Black Follow the same precautions you would use without wrist straps, including: Female Socket Snap 4mm • Make certain that equipment having a grounding type plug is properly grounded. • Make certain that you are not in contact with grounded objects other than through the ESD Series. Item Description 2271 Adjustable Wristband 2272 Adjustable Wrist Strap with 5' Coil Cord Unless otherwise noted, tolerance ±10% Specifications and procedures subject to change without notice. 2271/2272 SINGLE-WIRE ADJUSTABLE FABRIC WRIST STRAP 926 JR Industrial Drive, Sanford, NC 27332 DRAWING DATE NUMBER WEB SITE: StaticControl.com October PHONE (919) 718-0000 2271/2272 2015 © 2015 DESCO INDUSTRIES INC. Employee Owned

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S CS: 2272 2271