Series 218 DDaattaa SShheeeett ® Electrocomponents Half Pitch, SMD DIP Switch SMT Half Pitch DIP Switch–Auto Placeable Features Optimized Mechanical Features • Gull-wing and "J" bend terminal configurations • Low profile actuators prevent accidental actuation • SPSTconfigurationavailable Optimized Contact System • Redundant, wiping contact • Contactor does not deflect during actuation • 0.6 mm/.024" actuator travel Materials • Gold plated beryllium copper contacts • Gold flash coated terminals • High temperature materials (UL94V-0) • RoHS Compliant • Optional top tape seal for board spray washing Electrical and Mechanical Specifications Switch Function Coplanarity SPST - 2, 4, 6, 8, 10, and 12 positions Coplanarityof0.1mm/.004"maximum Allowable Solder Time Switch Contact Resistance Up to 60 seconds at 260°C 100milliohmsmaximuminitial 100milliohmsmaximumatendoflife Vibration Per MIL-STD-202G, method 204D, condition B Insulation Resistance (.06"or15G’sbetween10HZto2KHz)with 100 megohms minimum between nocontactinconsistenciesgreaterthan1 insulated terminals microsecond. Dielectric Strength Shock 350 VAC for 1 minute between Per MIL-STD-202G, method 213B, condition A adjacent switches (50G’s)withnocontactinconsistenciesgreater Nonswitching Rating than1microsecond. 100mAor50VDCmaximum Sealing Switch Capacitance Standard bottom seal 10pFmaximumbetweenadjacent Optional top tape seal for board spray washing closed switches Marking Operating Temperature Specialmarkingavailable-consultCTS -55°Cto+85°C Packaging Actuation Life Standard : Anti-static tube packaging 1,000cyclesswitching25mA@24VDC Optional :Tape and reel packaging 1-2 © 2017 CTS Corporation. All rights reserved. Information subject to change. 06/14/17 CTS Electrocomponents www.ctscorp.com

CTS SERIES 218LPJ - "J" Bend Terminal 5.8 .228 DIM "A" ON CTS 2.7 ±0.3 .106 ±0.012 TRAVEL .002.46 REF. 1 2 11 12 .003.95 MOUNTING SURFACE TYP. 3.20±0.15 1.27TYP. .001.485 .126±.006 .050 +0.15 6.05-0.08 .238+.006 -.003 SURFACE MOUNT PAD LAYOUT TABLE 1 TYP. 1.27 .050 1.27 NO. OF SWITCH "A" OVERALL 0.51 .050 POSITIONS DIMENSIONS .021 2 3.71/.146 4 6.25/.246 5.37 6 8.79/.346 .211 8 11.33/.446 10 13.87/.546 12 16.41/.646 0.76 .030 CTS SERIES 218LP - Gull Wing Terminal 5.80 .228 DIM "A" ON CTS STAND OFF 2.65MAX. 0.10±0.10 .104 .004±.004 TRAVEL .002.46 REF. 1 2 11 12 0.5 MOUNTING SURFACE TYP. .020 0.45 8.44±0.20 TYP. .018 .332±.008 1.27 .050 SURFACE MOUNT PAD LAYOUT TYP. TABLE 2 1.27 .050 NO. OF SWITCH "A" OVERALL 0.0.5210 .10.5207 POSITIONS DIMENSIONS 2 3.71/.146 4 6.25/.246 6 8.79/.346 8.3.8590 8 11.33/.446 10 13.87/.546 12 16.41/.646 mm DIMENSION: 0.76 inch .030 Ordering Information 218 – 12 LP S T J R F BLANK:SHIP ATON POSITION XX: NO. OF POSITIONS F: S H I P AT OFF POSITION LP: LOW PROFILE ACTUATOR BLANK : ANTI-STATIC TUBE PACKAGING R:TAPEANDREELPACKAGING S: BOTTOM SEAL BLANK : GULL WING TERMINAL J: J BEND TERMINAL BLANK : NO TOP TAPE SEAL T : TOP TAPE SEAL © 2017 CTS Corporation. All rights reserved. Information subject to change. 06/14/17 CTSElectronicComponents www.ctscorp.com