Series 209/210 Through-Hole DIP Switch  Available with low profile, medium, and extended height actuators  Series 209 – premium gold plated beryllium copper contacts  Series 210 – economical gold flash beryllium copper contacts  Low profile body  RoHS compliant  Optional top tape seal for board spray washing Description These versatile, low profile switches, are available with auto-insertable or hand-insertable terminal styles. The switches feature a positive detent feature separate from the contactor so it does not deflect during actuation. The molded body paired with the optional top tape seal provides optimum protection during soldering processes that includes board spray washing. This versatile switch is an ideal choice for most SPST applications. Ordering Information Switch Positions Series Number of Actuator B Bottom Seal Top Tape Seal S Shipping Position Terminal Type Ship ping Position Height 209/210- XX M S T F D No. of switch Code Spec. Code Spec. Code positions E Extended height actuator (0.6mm/.024”) BLANK Ship at ON position 2 2 positions M M e d i u m actuator (0.25mm/.010”) F Ship at OFF position 3 3 positions LP L o w p r o f i l e ( F lush) 4 4 positions 5 5 positions 6 6 positions Code Spec. 7 7 positions BLANK Auto-insertable terminal 8 8 positions D Straight terminal 9 9 positions 10 10 positions 12 1 2 positions Code Top tape seal Blank No top tape seal Top tape seal T ( Not available on extended actuator) Notes: Contact CTS for other common features not listed. 2019-10-1 Rev. D Page 1 of 3 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

Series 209/210 Through-Hole DIP Switch Electrical Specifications Parameter Conditions & Remarks Min Max Unit Operating Temperature -40 +85 °C Range Switch Function Circuit SPST 2 12 positions Initial 25 Contact Resistance (209) milliohms At end of life 50 Initial 100 Contact Resistance (210) milliohms At end of life 500 Insulation Resistance Between insulated terminals 1000 megohms 500 VAC between adjacent Dielectric Strength 1 minute switches 100mA @ 20 VDC or Actuation Life (209) 2,000 cycles .1mA @ 5 VDC(dry circuit) 100mA @ 20 VDC or Actuation Life (210) 1,000 cycles .1mA@5 VDC(dry circuit) Between adjacent closed Switch Capacitance 5.0 pF switches 100 mA Non-switching Rating or or 50 VDC Mechanical and Environmental Soldering Maximum wave temperature, 260°C for 5 seconds MSL Level 1 RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Per MIL-STD-202F, method 213B, condition A (50G’s) Shock with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B (.06” or 15G’s between 10 HZ to 2K HZ) with Vibration no contact inconsistencies greater than 1 microsecond Seal Bottom seal standard, optional top tape seal for board spray washing Marking Special top marking available-consult CTS Packaging: Standard anti-static tube packaging Storage Temperature -40°C to +85°C Range 2019-10-1 Rev. D Page 2 of 3 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

Series 209/210 Through-Hole DIP Switch Mechanical Specifications Series 209 / 210 Contact Features 2019-10-1 Rev. D Page 3 of 3 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.