3 4017 page 1 of 4 Half and Full Facepiece Respirators 6000 Series, Reusable Issue Date 01/01/04 Unmatched performance and comfort. 3MTM Half and Full Facepiece Respirators 6000 Series, Reusable offer the user comfort and convenience coupled with the cost savings of a reusable respirator. Features/Benefits • Used with 3MTMFilters and Cartridges, these respirators are among the lightest available • The swept back design of the cartridges improves balance The 3MTM Half and Full Facepiece Respirators 6000 Series, and visibility Reusable with replaceable cartridges/filters • Remarkably comfortable, soft, lightweight facepiece The 6000 Series respirators • Small diameter breathing tubes and easy-to-adjust head straps can be used in dual airline mode: are simple to work with and easy • Reusable—just dispose of • Available with both back- to clean and decontaminate the cartridges/filters when mounted and front-mounted used to capacity breathing tubes • The half facepiece design is • Systems can be used in available with a standard and combinationwith NIOSH drop down head harness approved 3MTM 2000 Series Filters or 6000 Series Cartridges • Can be disassembled, cleaned and P100 Filter/Cartridges ! WARNING and reused • Cartridge/filter connections These respirators help reduce • NIOSH approved for negative provide negative and positive exposure to certain airborne pressure air purifying and pressure capability in one contaminants.Misuse may positive pressure dual airline respirator assembly result in sickness or death. applications Before use,the wearer must • Can be used on both high and read and understand User • Supplied with reclosable low pressure systems* Instructionsprovided as a part storage bag of product packaging.Time use • Wearer can disconnect the airline limitations may apply.For proper • The half and full facepieces are at the air regulating valve and the use,see supervisor,packaging each available in 3 sizes (small, system is changed to a filters/ or call 3M OH&ESD Technical medium, large) to comfortably cartridges air purifying mode— Service,call 1-800-243-4630. fit many faces In Canada,call 1-800-267-4414 then back to supplied air system or 1-800-265-1840,ext.6137. with a simple reconnection of the airline * Employer must provide a minimum of Grade D breathing air in accordance with OSHA requirements.

3MTM Half and Full Facepiece Respirators 4017 6000 Series, Reusable page 2 of 4 Half Facepieces Half Facepieces Drop Down 6100/07024 Small 6200/07025 Medium 6100DD Small 6300/07026 Large 6200DD Medium 6300DD Large Full Facepieces Full Facepieces DIN 6700 Small 6700DIN Small 6800 Medium 6800DIN Medium 6900 Large 6900DIN Large 3MTM Filters and Accessories 2000 Series,7093,5N11,5P71 2071 2076HF 2078 2091/07000 2096 2097/07184 P95 P95 filter with P95 filter with P100 P100 filter P100 filter particulate hydrogen fluoride, nuisance level particulate with nuisance with nuisance filter nuisance level organic vapor and filter level acid level organic acid gas relief* acid gas relief* gas relief* vapor relief* *Nuisance levels refer to concentrations below the OSHA PEL. 7093 5N11 5P71/07194 501 502 P100 N95 filter P95 filter filter retainer filter adapter particulate (use with the 501 (use with the 501 (use with the 5N11 (use with the 2000 filter filter retainer) filter retainer) and 5P71 filters) Series and 7093 filters)

3MTM Half and Full Facepiece Respirators 4017 6000 Series, Reusable page 3 of 4 Product Product Number NIOSHApproval* Number NIOSHApproval* 6001 Certain organic vapors (a)(b) 60921 P100/Certain organic vapors (a)(b) 6002 Chlorine, hydrogen chloride, and 60922 P100/Chlorine, hydrogen chloride, sulfur dioxide or chlorine dioxide or and sulfur dioxide or chlorine hydrogen sulfide (escape only) (a)(b) dioxide or hydrogen sulfide (escape only) (a)(b) 6003 Certain organic vapors, chlorine, hydrogen chloride, and sulfur 60923 P100/Certain organic vapors, chlorine, dioxide or hydrogen sulfide hydrogen chloride, and sulfur dioxide (escape only) or hydrogen or hydrogen sulfide (escape only) or fluoride (a)(b) hydrogen fluoride (a)(b) 6004 Ammonia and methylamine (a)(b) 60924 P100/Ammonia and methylamine(a)(b) 6005 Formaldehyde and certain organic 60925 P100/Formaldehyde and certain vapors(a)(b)(c) organic vapors (a)(b)(c) 6006 Certain organic vapors, chlorine, 60926 P100/Certain organic vapors, hydrogen chloride, chlorine dioxide, chlorine, hydrogen chloride, sulfur dioxide, hydrogen sulfide chlorine dioxide, sulfur dioxide, (escape only) ammonia/methylamine, hydrogen sulfide (escape only) formaldehyde or hydrogen fluoride ammonia/methylamine, formaldehyde (a)(b)(c) or hydrogen fluoride (a)(b)(c) 6009 Mercury vapor or chlorine gas (a)(b) 60928 P100/Organic Vapor/Acid Gas (d) 60929 P100/Mercury vapor or chlorine gas(a)(b) *For respiratory protection against the following contaminants up to 10X PEL with half facepiece respirators or 50X PEL with full facepiece respirators when quantitatively fit tested. (a)All respirators and respirator/filter assemblies can be used up to the NIOSH approval limits, 10X PEL for half facepiece respirators or 50X PEL for full facepiece respirators or the maximum use concentration allowable in applicable OSHA standards, whichever is lower. (b)For specific usage, limitations and warning information, see respirator and/or filter packaging, or call 3M OH&ESD Technical Service 1-800-243-4630.In Canada, call 1-800-267-4414. (c)OSHA regulations require that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde. (d)As recommended by the California Department of Pesticide Regulation no.01-099 Methyl Bromide Field Fumigation. Half Facepiece Replacement Parts 6000 Series Half Facepiece 6000 Series Replacement Parts Facepieces Facepieces 6281 Respirator Strap Assembly 6893 Inhalation Valve per bag per case 6889 Exhalation Valve 6895 Inhalation Gasket 1 24 Full Facepiece Replacement Parts and Accessories 6000 Series Full Facepiece 6000 Series Replacement Parts Accessories Facepieces Facepieces per box per case 7883 Neck Strap Assembly 6878 Spectacle Kit 6889 Exhalation Valve 6885 Face Shield Cover 1 4 6892 Center Adapter Assembly 6886 Tinted Lens Cover 6893 Inhalation Valve 6894 Nose Cup Assembly 6895 Inhalation Gasket 6896 Center Adapter Gasket 6897 Head Harness Assembly 6898 Lens Assembly 6899 Lens Frame Kit

3MTM Half and Full Facepiece Respirators 4017 6000 Series, Reusable page 4 of 4 To complete a 3MTMDual Airline RespiratorSystem, select a facepiece, an adapterkit and an airsupply hose. For example: 6800 + SA-2000 + W-9435-100 = complete system. High Low Accessories and replacement parts Pressure Pressure Standard Back-Mounted Adapter Kit.Includes SA-2500 Breathing Tube, GVP-127 SA-2000 SA-2000LP Belt and SA-1009 Air Regulator orSA-1029 Connector (low pressure). Combination Back-Mounted Adapter Kit.Includes 2600 Breathing Tube, GVP-127 Belt SA-2100 SA-2100LP and SA-1009 Regulator orSA-1029 Connector (low pressure).Cartridges/Filters not included. Standard Front-Mounted Adapter Kit.Includes SA-1500 Breathing Tube, GVP-127 Belt, SA-1000 SA-1000LP and SA-1009 Regulator orSA-1029 Connector (low pressure). Combination Front-Mounted Adapter Kit.Includes SA-1600 Breathing Tube, GVP-127 Belt, SA-1100 SA-1100LP and SA-1009 Regulator orSA-1029 Connector (low pressure).Cartridges/Filters not included. Note:For more information on 3MTMDual Airline Supplied Air Systems, please call 3M’s Fax On Demand line at 1-800-646-1655 and order document number 4024. For more information,please contact: 3M Occupational Health and Environmental Safety Division (OH&ESD) 3MTM Fit Test Respirator 3MTM Quantitative Fit Test In the U.S.,contact: 3M developed this product Adapter601 Sales Assistance 1-800-896-4223 specifically for quantitative fit For use with all 3M bayonet Technical Assistance testing. Available in small (6100Q), attachment facepieces. 1-800-243-4630 medium (6200Q) and large (6300Q). Fax On Demand 1-800-646-1655 Aprobe has been added for fit Internet testing purposes. Do not use for http://www.3M.com/occsafety For other 3M products respiratory protection. 1-800-3M HELPS In Canada,contact: 3MTMFit Test Kits 3M Canada Company, OH&ESD • FT-10 Qualitative Fit Test P.O.Box 5757 London, Ontario N6A 4T1 Apparatus (sweet solution) Sales Assistance • FT-20 Training and Fit Testing 1-800-265-1840, ext.6137 Case (sweet solution) Technical Assistance (Canada only) 1-800-267-4414 • FT-30 Qualitative Fit Test Fax On Demand Apparatus (bitter solution) 1-800-646-1655 Internet http://www.3M.com/CA/occsafety Technical Assistance In Mexico 01-800-712-0646 5270-2255, 5270-2119 (Mexico City only) Technical Assistance In Brazil 3M Occupational Health and Environmental Safety Division 0800-132333 3M Center, Building 235-2W-70 Fax On Demand O.U.S.Locations 1-651-732-6530 St. Paul, MN 55144-1000