Features NT *RoHS VCEOARVMSIAPILOLINAASBLE n n B(Ibd5raeo lmaaanld mfcboe arddn ib adMom caineirrditc-e TurleR,it vs7IeG .l3 Ap RmroDmt™e cl etSinoegnrti heos)f nnn HR io g H h S s UucoLrgm Rep eclciuaorngrten*ni ztve erdarstiinogn, alovwai lainbsleertion loss n Leadless, surface mount for economical assembly n Stable breakdown throughout life NT MPLIA HS CO 2036-xx-SM Precision Gas Discharge Tube Surge Protector Ro * Bourns now offers a surface mount (SM) 3-electrode Gas Discharge Tube (GDT) surge protection device. The industry-leading quality and features of the Bourns® miniature 2036 TRIGARD™ series GDT continues in this new SM version for “pick and place” manufacturing techniques. The 2036 SM device is ideal for board level protection of high bandwidth applications such as xDSL, cable broadband and high speed Ethernet, due to its high energy handling capability, long and sRtEaEble life performance and low capacitance of less than 2 pF. Bourns subminiature family opfr eGvDenTts dmaemaasguere f roonmly t r5a nmsmie nint ddiisatmurebtaenr caensd bayr eLaE cAtDht iFen gs masa lale “sctr hoiwgbha pre” rinfo crmreaanticneg Ga DsThso ritn-t oth-eg rtoeulencdo cmir cinuditu dsutrryin. gB ocuornndsu®c GtioDnT.s W ahree nd eas vigonlteadg eto transient surge exceeds the defined breakdown voltage level of the GDT, the device becomes ionized and conduction takes place within a fraction of a microsecond. When the surge passes and system voltage returns to normal levels, the GDT returns to its high-impedance (off) state. Characteristics TCDeshCta SMrapecatthrekorodivsset iprc e±r2 I0T U%- T@ K 1.1020, VIE/sEE C62.31 a2n0d73 5I6E V-C07 61643-3210193 0G6L VEV-REDA0oRDH ST9ISF OR CNEsOSE tMAaPRLnIE AdNTa*2rd10s53.06 -V1M5odel No22.00306 -V20 2203306 -V23 2205306 -V25 Impulse Sparkover (1) 100 V/µs 250 V 250 V 350 V 425 V 450 V 475 V 1000 V/µs 525 V 550 V 500 V 575 V 600 V 625 V Model No. Characteristic 2036-30 2036-35 2036-40 2036-42 2036-47 2036-60 DC Sparkover ±20 % @ 100 V/s 300 V 350 V 400 V 420 V 470 V 600 V Impulse Sparkover (1) 100 V/µs 500 V 600 V 650 V 675 V 750 V 850 V 1000 V/µs 650 V 750 V 825 V 850 V 950 V 1100 V (1) Impulse Sparkover voltage is defined as typical values of distribution. Impulse Transverse Delay ...............................1000 V/μs ..........................................................< 75 ns Insulation Resistance (IR) ...............................100 V (50 V for Model 2036-07 & 2036-09) ......> 1010 Ω Glow Voltage ...................................................10 mA ................................................................~ 70 V Arc Voltage ......................................................1 A .....................................................................~ 10 V Glow-Arc Transition Current .......................................................................................................< 0.5 A Capacitance.....................................................1 MHz ...............................................................< 2 pF DC Holdover Voltage (2) ...................................>135 V, (52 V for Model 2036-07, & -09, ..........< 150 ms 80 V for Model 2036-15) Impulse Discharge Current ..............................20000 A, 8/20 µs (3) ........................................... 1 operation minimum 10000 A, 8/20 µs ............................................... 10 operations 200 A, 10/1000 µs ............................................ 300 operations 2000 A, 10/350 µs ............................................. 1 operation 200 A, 10/700 µs .............................................. 500 operations Alternating Discharge Current .........................20 Arms, 1 s2 .................................................... 1 operation minimum 10 Arms, 1 s ...................................................... 10 operations Storage Temperature .................................................................................................................. -55 to +105 °C Operating Temperature ............................................................................................................... -55 to +105 °C Climatic Category (IEC 60068-1)................................................................................................ 55/105/21 Moisture Sensitivity Level ........................................................................................................... 1 ESD Classification (HBM)........................................................................................................... N/A Notes: • UL Recognized component, UL File E153537. • Operating characteristics per RUS PE-80 and Telcordia GR 1361 available • No model number marking on tube; date code and voltage only: month on request. year digits, xxxV (e.g. 0209 400V). • Line to Line voltage is approximately 1.8 to 2 times the stated Line to • The rated discharge current for Mini-TRIGARD™ GDTs is the total Ground breakdown voltage. current equally divided between each line to ground. • At delivery AQL 0.65 Level II, DIN ISO 2859. • Surface Mount (SM) parts may show a temporary increase in DCBD after • Bourns recommends reflowing surface mount devices per IPC/JEDEC the solder reflow process. Most devices will recover within 24 hours time. J-STD-020 rev D. It should be noted that there is no quality defect nor change in protection (2) Network applied. levels during the temporary change in DCBD. (3) DC Sparkover may exceed ±25 % but will continue to protect without • Sparkover limits after life ±25 % (-25 %,+30 % for Model 2036-07, venting. 2036-09 and 2036-60), IR >108 Ω. * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/ EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this docu- WARNING Cancer and Reproductive Harm ment are subject to specific legal disclaimers as set forth on the last page of this document , www.P65Warnings.ca.gov and at www.bourns.com/docs/legal/disclaimer.pdf.

2036-xx-SM Precision Gas Discharge Tube Surge Protector Product Dimensions Recommended Pad Layout 7.3 ± 0.26 (.287 ± .010) 1.6 0.9 ± 0.2 (.035 ± .008) (.063) 5.0 ± 0.2 5.6 (.197 ± .008) (.221) 0.5 ± 0.2 0.7 ± 0.2 (.020 ± .008) (.028 ± .008) 3.3 (.130) 8.2 (.323) DIMENSIONS: MILLIMETERS/(INCHES) How to Order 2036 - xx - SM - RP LF Model Number Designator Voltage (Divided by 10) Surface Mount Packaging Options* Blank = Bulk Packaging (Standard) RP = Reelpack - 1000 pcs./reel (Optional) RP2 = Reelpack - 1000 pcs./reel (Optional) RoHS Compliant Option Blank = Standard Product LF = RoHS Compliant Product * The optional -RP & -RP2 reelpacks contain 1000 pcs./reel. The reels are 330 mm in diameter. The -RP reelpack is 16 mm wide. The -RP2 reelpack is 24 mm wide. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and atw ww.bourns.com/docs/legal/disclaimer.pdf.

2036-xx-SM Precision Gas Discharge Tube Surge Protector Packaging Specifications The Model 2036-xx-SM ships standard bulk pack, 250 pieces per bag, 4 bags per box. The optional -RP & -RP2 reelpacks contain 1,000 pcs./reel. The reels are 330 mm in diameter. The -RP reelpack is 16 mm wide. The -RP2 reelpack is 24 mm wide. -RP 4.0 1.7 2.0 16.0 7.5 12.0 4.0 12.0 -RP2 1.75 2.0 1.50 +0.10/-0.00 A DIA. 11.50 24.00 NOM. 22.25 3 ° 3.00 A 7.80 1.50 DIA. 3.00 ± 0.10 .41 14.90 ± 0.10 3 ° 5.26 ± 0.10 9.35 ± 0.10 SECTION A-A 5.25 ± 0.10 TOLERANCES: 0.13 UNLESS OTHERWISE NOTED DIMENSIONS: MILLIMETERS REV. X – 11/18 Mini-TRIGARD™ is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R